Abstracts – Browse Results

Search or browse again.

Click on the titles below to expand the information about each abstract.
Viewing 26 results ...

Çıdık, M S and Boyd, D (2020) “Shared sense of purposefulness”: a new concept to understand the practice of coordinating design in construction. Construction Management and Economics, 38(01), 18–31.

Ahmad Shazali, A S and Tahar, K N (2019) Virtual 3D model of Canseleri building via close-range photogrammetry implementation. International Journal of Building Pathology and Adaptation, 38(01), 217–27.

Amadi, A and Higham, A P (2019) A cost trajectory to environmentally adaptive building construction in wet humid settings. International Journal of Building Pathology and Adaptation, 38(01), 68–88.

Ashdown, M M, Crawley, J, Biddulph, P, Wingfield, J, Lowe, R and Elwell, C A (2019) Characterising the airtightness of dwellings. International Journal of Building Pathology and Adaptation, 38(01), 89–106.

Brooks, T, Scott, L, Spillane, J P and Hayward, K (2020) Irish construction cross border trade and Brexit: Practitioner perceptions on the periphery of Europe. Construction Management and Economics, 38(01), 71–90.

Brown, N, Wright, A J, Shukla, A and Stuart, G (2010) Longitudinal analysis of energy metering data from non-domestic buildings. Building Research & Information, 38(01), 91.

Crawley, J, Biddulph, P, Wingfield, J, Ashdown, M, Lowe, R and Elwell, C (2019) Inferring the as-built air permeability of new UK dwellings. International Journal of Building Pathology and Adaptation, 38(01), 3–19.

Crosbie, T and Baker, K (2010) Energy-efficiency interventions in housing: learning from the inhabitants. Building Research & Information, 38(01), 9.

Djebbar, K E, Salem, S and Mokhtari, A (2019) Assessment of energy performance using bottom-up method. International Journal of Building Pathology and Adaptation, 38(01), 192–216.

Erkoreka, A, Flores-Abascal, I, Escudero, C, Martin, K, Millan, J A and Sala, J M (2019) Flat roof hygrothermal performance testing and evaluation. International Journal of Building Pathology and Adaptation, 38(01), 148–75.

Firth, S K, Lomas, K J and Wright, A J (2010) Targeting household energy-efficiency measures using sensitivity analysis. Building Research & Information, 38(01), 25–41.

Flood, C and Scott, L (2019) Thermal analysis and post construction verification. International Journal of Building Pathology and Adaptation, 38(01), 51–67.

Gupta, R, Gregg, M and Cherian, R (2019) Developing a new framework to bring consistency and flexibility in evaluating actual building performance. International Journal of Building Pathology and Adaptation, 38(01), 228–55.

Hamidane, H, Ababneh, A, Messabhia, A and Xi, Y (2019) Modeling of chloride penetration in concrete structures under freeze-thaw cycles. International Journal of Building Pathology and Adaptation, 38(01), 127–47.

Ibraheem, Y, Piroozfar, P A, Farr, E R and Ravenscroft, N (2019) Methodological evaluation of Integrated Façade Systems. International Journal of Building Pathology and Adaptation, 38(01), 107–26.

Li, M, Allinson, D and Lomas, K (2019) Estimation of building heat transfer coefficients from in-use data. International Journal of Building Pathology and Adaptation, 38(01), 38–50.

Marsh, R, Larsen, V G and Kragh, M (2010) Housing and energy in Denmark: past, present, and future challenges. Building Research & Information, 38(01), 92–106.

O’Connell, S, Reynders, G, Seri, F, Sterling, R and Keane, M M (2019) A standardised flexibility assessment methodology for demand response. International Journal of Building Pathology and Adaptation, 38(01), 20–37.

Oswald, D (2020) Safety indicators: questioning the quantitative dominance. Construction Management and Economics, 38(01), 11–17.

Ponton, H, Osborne, A, Thompson, N and Greenwood, D (2020) The power of humour to unite and divide: a case study of design coordination meetings in construction. Construction Management and Economics, 38(01), 32–54.

Rogage, K, Clear, A, Alwan, Z, Lawrence, T and Kelly, G (2019) Assessing building performance in residential buildings using BIM and sensor data. International Journal of Building Pathology and Adaptation, 38(01), 176–91.

Shipworth, M, Firth, S K, Gentry, M I, Wright, A J, Shipworth, D T and Lomas, K J (2010) Central heating thermostat settings and timing: building demographics. Building Research & Information, 38(01), 50–69.

  • Type: Journal Article
  • Keywords: building energy model; central heating; control systems; demand temperature; domestic heating controls; energy demand; inhabitant behaviour; thermostat setting
  • ISBN/ISSN: 0961-3218
  • URL: https://doi.org/10.1080/09613210903263007
  • Abstract:
    Crucial empirical data (currently absent in building energy models) on central heating demand temperatures and durations are presented. These data are derived from the first national survey of energy use in English homes and includes monitored temperatures in living rooms, central heating settings reported by participants, along with building, technical, and behavioural data. The results are compared with model assumptions with respect to thermostat settings and heating durations. Contrary to assumptions, the use of controls did not reduce average maximum living room temperatures or the duration of operation. Regulations, policies, and programmes may need to revise their assumptions that adding controls will reduce energy use. Alternative forms of heating control should be developed and tested to ascertain whether their use saves energy in real-world settings. Given the finding that detached houses are heated for longer, these dwellings should be particularly targeted in energy-efficiency retrofit programmes. Furthermore, social marketing programmes could use the wide variation in thermostat settings as the foundation of a ‘social norm’ programme aimed at reducing temperatures in ‘overheated’ homes. Finally, building energy models that inform energy policies require firmer foundations in real-world data to improve policy effectiveness. Greater coordination of data collection and management would make more data available for this purpose.

Summerfield, A J, Lowe, R J and Oreszczyn, T (2010) Two models for benchmarking UK domestic delivered energy. Building Research & Information, 38(01), 12–24.

Summerfield, A J, Pathan, A, Lowe, R J and Oreszczyn, T (2010) Changes in energy demand from low-energy homes. Building Research & Information, 38(01), 42–9.

Troje, D and Gluch, P (2020) Populating the social realm: new roles arising from social procurement. Construction Management and Economics, 38(01), 55–70.

van den Boomen, M, Spaan, M T J, Shang, Y and Wolfert, A R M (2020) Infrastructure maintenance and replacement optimization under multiple uncertainties and managerial flexibility. Construction Management and Economics, 38(01), 91–107.