ARCOM

Search or browse again.

Click on the titles below to expand the information about each abstract.
Viewing 26 results ...

Çıdık, M S and Boyd, D (2020) “Shared sense of purposefulness”: a new concept to understand the practice of coordinating design in construction. Construction Management and Economics, 38(01), 18–31.

Ahmad Shazali, A S and Tahar, K N (2019) Virtual 3D model of Canseleri building via close-range photogrammetry implementation. International Journal of Building Pathology and Adaptation, 38(01), 217–27.

Amadi, A and Higham, A P (2019) A cost trajectory to environmentally adaptive building construction in wet humid settings. International Journal of Building Pathology and Adaptation, 38(01), 68–88.

Ashdown, M M, Crawley, J, Biddulph, P, Wingfield, J, Lowe, R and Elwell, C A (2019) Characterising the airtightness of dwellings. International Journal of Building Pathology and Adaptation, 38(01), 89–106.

• Type: Journal Article
• Keywords: Compliance; Buildings; Statistics; Bayesian inference; Airtightness;
• ISBN/ISSN: 2398-4708
• URL: https://doi.org/10.1108/IJBPA-02-2019-0024
• Abstract:
  The purpose of this paper is to investigate the distribution of dwelling airtightness test results for a developer, between 2007 and 2011. The changes in airtightness test results over time are discussed, and links between the airtightness test results and the construction technique are investigated. A data set of airtightness test results was statistically analysed by applying probabilistic model of the distribution and using Bayesian parameter estimation techniques. The inferred background distributions, those estimated to describe dwelling performance before secondary sealing, suggest an improvement in airtightness between 2008 and 2011, the mode decreases from 5.46±0.09 m³/m²h to 4.12±0.07 m³/m²h with a corresponding shift in practice towards a more target-driven approach. The most airtight dwellings are constructed from reinforced concrete frame, followed by “traditional” (dry lined masonry), timber frame and lightweight steel frame. This study is limited by the size of the available data set (901 dwellings), and by the fact that the data set contains a larger proportion of flats to houses; however, the metadata has enabled the exploration of the link between construction practices and airtightness. Developers need better guidance surrounding how to meet more stringent airtightness requirements through improvements to the primary air barrier, with incentives and support to deliver changes in practice. Furthermore, if a large number of dwellings undergo secondary sealing, this may have implications for the long-term efficiency of the dwelling stock. This analysis investigates two issues that have not previously been studied on a significant number of dwellings: the changes to the distribution of airtightness results over time and the link between construction methods and airtightness.

Brooks, T, Scott, L, Spillane, J P and Hayward, K (2020) Irish construction cross border trade and Brexit: Practitioner perceptions on the periphery of Europe. Construction Management and Economics, 38(01), 71–90.

Brown, N, Wright, A J, Shukla, A and Stuart, G (2010) Longitudinal analysis of energy metering data from non-domestic buildings. Building Research & Information, 38(01), 91.

Crawley, J, Biddulph, P, Wingfield, J, Ashdown, M, Lowe, R and Elwell, C (2019) Inferring the as-built air permeability of new UK dwellings. International Journal of Building Pathology and Adaptation, 38(01), 3–19.

Crosbie, T and Baker, K (2010) Energy-efficiency interventions in housing: learning from the inhabitants. Building Research & Information, 38(01), 9.

Djebbar, K E, Salem, S and Mokhtari, A (2019) Assessment of energy performance using bottom-up method. International Journal of Building Pathology and Adaptation, 38(01), 192–216.

Erkoreka, A, Flores-Abascal, I, Escudero, C, Martin, K, Millan, J A and Sala, J M (2019) Flat roof hygrothermal performance testing and evaluation. International Journal of Building Pathology and Adaptation, 38(01), 148–75.

Firth, S K, Lomas, K J and Wright, A J (2010) Targeting household energy-efficiency measures using sensitivity analysis. Building Research & Information, 38(01), 25–41.

Flood, C and Scott, L (2019) Thermal analysis and post construction verification. International Journal of Building Pathology and Adaptation, 38(01), 51–67.

Gupta, R, Gregg, M and Cherian, R (2019) Developing a new framework to bring consistency and flexibility in evaluating actual building performance. International Journal of Building Pathology and Adaptation, 38(01), 228–55.

Hamidane, H, Ababneh, A, Messabhia, A and Xi, Y (2019) Modeling of chloride penetration in concrete structures under freeze-thaw cycles. International Journal of Building Pathology and Adaptation, 38(01), 127–47.

Ibraheem, Y, Piroozfar, P A, Farr, E R and Ravenscroft, N (2019) Methodological evaluation of Integrated Façade Systems. International Journal of Building Pathology and Adaptation, 38(01), 107–26.

Li, M, Allinson, D and Lomas, K (2019) Estimation of building heat transfer coefficients from in-use data. International Journal of Building Pathology and Adaptation, 38(01), 38–50.

Marsh, R, Larsen, V G and Kragh, M (2010) Housing and energy in Denmark: past, present, and future challenges. Building Research & Information, 38(01), 92–106.

O’Connell, S, Reynders, G, Seri, F, Sterling, R and Keane, M M (2019) A standardised flexibility assessment methodology for demand response. International Journal of Building Pathology and Adaptation, 38(01), 20–37.

Oswald, D (2020) Safety indicators: questioning the quantitative dominance. Construction Management and Economics, 38(01), 11–17.

Ponton, H, Osborne, A, Thompson, N and Greenwood, D (2020) The power of humour to unite and divide: a case study of design coordination meetings in construction. Construction Management and Economics, 38(01), 32–54.

Rogage, K, Clear, A, Alwan, Z, Lawrence, T and Kelly, G (2019) Assessing building performance in residential buildings using BIM and sensor data. International Journal of Building Pathology and Adaptation, 38(01), 176–91.

Shipworth, M, Firth, S K, Gentry, M I, Wright, A J, Shipworth, D T and Lomas, K J (2010) Central heating thermostat settings and timing: building demographics. Building Research & Information, 38(01), 50–69.

Summerfield, A J, Lowe, R J and Oreszczyn, T (2010) Two models for benchmarking UK domestic delivered energy. Building Research & Information, 38(01), 12–24.

Summerfield, A J, Pathan, A, Lowe, R J and Oreszczyn, T (2010) Changes in energy demand from low-energy homes. Building Research & Information, 38(01), 42–9.

Troje, D and Gluch, P (2020) Populating the social realm: new roles arising from social procurement. Construction Management and Economics, 38(01), 55–70.

van den Boomen, M, Spaan, M T J, Shang, Y and Wolfert, A R M (2020) Infrastructure maintenance and replacement optimization under multiple uncertainties and managerial flexibility. Construction Management and Economics, 38(01), 91–107.