ARCOM

Search or browse again.

Click on the titles below to expand the information about each abstract.
Viewing 26 results ...

Çıdık, M S and Boyd, D (2020) “Shared sense of purposefulness”: a new concept to understand the practice of coordinating design in construction. Construction Management and Economics, 38(01), 18–31.

Ahmad Shazali, A S and Tahar, K N (2019) Virtual 3D model of Canseleri building via close-range photogrammetry implementation. International Journal of Building Pathology and Adaptation, 38(01), 217–27.

Amadi, A and Higham, A P (2019) A cost trajectory to environmentally adaptive building construction in wet humid settings. International Journal of Building Pathology and Adaptation, 38(01), 68–88.

Ashdown, M M, Crawley, J, Biddulph, P, Wingfield, J, Lowe, R and Elwell, C A (2019) Characterising the airtightness of dwellings. International Journal of Building Pathology and Adaptation, 38(01), 89–106.

Brooks, T, Scott, L, Spillane, J P and Hayward, K (2020) Irish construction cross border trade and Brexit: Practitioner perceptions on the periphery of Europe. Construction Management and Economics, 38(01), 71–90.

Brown, N, Wright, A J, Shukla, A and Stuart, G (2010) Longitudinal analysis of energy metering data from non-domestic buildings. Building Research & Information, 38(01), 91.

Crawley, J, Biddulph, P, Wingfield, J, Ashdown, M, Lowe, R and Elwell, C (2019) Inferring the as-built air permeability of new UK dwellings. International Journal of Building Pathology and Adaptation, 38(01), 3–19.

Crosbie, T and Baker, K (2010) Energy-efficiency interventions in housing: learning from the inhabitants. Building Research & Information, 38(01), 9.

Djebbar, K E, Salem, S and Mokhtari, A (2019) Assessment of energy performance using bottom-up method. International Journal of Building Pathology and Adaptation, 38(01), 192–216.

Erkoreka, A, Flores-Abascal, I, Escudero, C, Martin, K, Millan, J A and Sala, J M (2019) Flat roof hygrothermal performance testing and evaluation. International Journal of Building Pathology and Adaptation, 38(01), 148–75.

• Type: Journal Article
• Keywords: Building component RC-model calibration; Flat roof dynamic testing; Hygrothermal hourly performance simulation; PASLINK method; Wufi model calibration;
• ISBN/ISSN: 2398-4708
• URL: https://doi.org/10.1108/IJBPA-02-2019-0015
• Abstract:
  Understanding the dynamic hygrothermal behavior of building elements is very important to ensure the optimal performance of buildings. The Laboratory for Quality Control in Buildings of the Basque Government tested a flat roof designed by a construction company that developed a building to be constructed using prefabricated modules. This is a five to eight floor building with ventilated façade and a flat roof covered by gravel with the possibility of changing it to a green cover. The paper aims to discuss this issue. The interest of this research was threefold. The first objective was to accurately test, under real dynamic weather conditions, the roof design in a PASLINK test cell to obtain the U-value and the thermal capacitance of the different roof layers, and of the roof as a whole, through the precise calibration of resistance-capacitance mathematical models of the roof. Based on the parameters and experimental information of these calibrated models, a second goal was to calibrate and validate a Wufi model of the roof. This second calibrated model was then used to simulate the dynamic hygrothermal behavior of the roof, obtaining the roof’s hourly thermal demand per square meter for a whole year in different locations considered in the Spanish Building Code. These simulations also permitted the authors to study the risk of condensation and mold growth of the tested component under different climatic conditions. The successful combination of the PASLINK method to calibrate the Wufi hygrothermal model is the main novelty of this research.

Firth, S K, Lomas, K J and Wright, A J (2010) Targeting household energy-efficiency measures using sensitivity analysis. Building Research & Information, 38(01), 25–41.

Flood, C and Scott, L (2019) Thermal analysis and post construction verification. International Journal of Building Pathology and Adaptation, 38(01), 51–67.

Gupta, R, Gregg, M and Cherian, R (2019) Developing a new framework to bring consistency and flexibility in evaluating actual building performance. International Journal of Building Pathology and Adaptation, 38(01), 228–55.

Hamidane, H, Ababneh, A, Messabhia, A and Xi, Y (2019) Modeling of chloride penetration in concrete structures under freeze-thaw cycles. International Journal of Building Pathology and Adaptation, 38(01), 127–47.

Ibraheem, Y, Piroozfar, P A, Farr, E R and Ravenscroft, N (2019) Methodological evaluation of Integrated Façade Systems. International Journal of Building Pathology and Adaptation, 38(01), 107–26.

Li, M, Allinson, D and Lomas, K (2019) Estimation of building heat transfer coefficients from in-use data. International Journal of Building Pathology and Adaptation, 38(01), 38–50.

Marsh, R, Larsen, V G and Kragh, M (2010) Housing and energy in Denmark: past, present, and future challenges. Building Research & Information, 38(01), 92–106.

O’Connell, S, Reynders, G, Seri, F, Sterling, R and Keane, M M (2019) A standardised flexibility assessment methodology for demand response. International Journal of Building Pathology and Adaptation, 38(01), 20–37.

Oswald, D (2020) Safety indicators: questioning the quantitative dominance. Construction Management and Economics, 38(01), 11–17.

Ponton, H, Osborne, A, Thompson, N and Greenwood, D (2020) The power of humour to unite and divide: a case study of design coordination meetings in construction. Construction Management and Economics, 38(01), 32–54.

Rogage, K, Clear, A, Alwan, Z, Lawrence, T and Kelly, G (2019) Assessing building performance in residential buildings using BIM and sensor data. International Journal of Building Pathology and Adaptation, 38(01), 176–91.

Shipworth, M, Firth, S K, Gentry, M I, Wright, A J, Shipworth, D T and Lomas, K J (2010) Central heating thermostat settings and timing: building demographics. Building Research & Information, 38(01), 50–69.

Summerfield, A J, Lowe, R J and Oreszczyn, T (2010) Two models for benchmarking UK domestic delivered energy. Building Research & Information, 38(01), 12–24.

Summerfield, A J, Pathan, A, Lowe, R J and Oreszczyn, T (2010) Changes in energy demand from low-energy homes. Building Research & Information, 38(01), 42–9.

Troje, D and Gluch, P (2020) Populating the social realm: new roles arising from social procurement. Construction Management and Economics, 38(01), 55–70.

van den Boomen, M, Spaan, M T J, Shang, Y and Wolfert, A R M (2020) Infrastructure maintenance and replacement optimization under multiple uncertainties and managerial flexibility. Construction Management and Economics, 38(01), 91–107.