Abstracts – Browse Results
Click on the titles below to expand the information about each abstract.
Viewing 17 results ...
Antwi-Afari, M F, Li, H, Edwards, D J, Pärn, E A, Seo, J and Wong, A (2017) Effects of different weights and lifting postures on balance control following repetitive lifting tasks in construction workers. International Journal of Building Pathology and Adaptation, 35(03), 247–63.
Ballesteros-Pérez, P and Skitmore, M (2017) On the distribution of bids for construction contract auctions. Construction Management and Economics, 35(03), 106-21.
Barrett, P (2007) Revaluing Construction: a holistic model. Building Research & Information, 35(03), 268–86.
Clarke, L, Gleeson, C and Winch, C (2017) What kind of expertise is needed for low energy construction?. Construction Management and Economics, 35(03), 78-89.
Cummings, S, Mcdougall, J A and Swaffield, J A (2007) Hydraulic assessment of non-circular-section building drainage. Building Research & Information, 35(03), 316–28.
Edwards, D J and Holt, G D (2007) Construction hand tools: vibration emissions from alternative inserts. Building Research & Information, 35(03), 329–42.
Forsythe, P (2017) Quantifying the recurring nature of fitout to assist LCA studies in office buildings. International Journal of Building Pathology and Adaptation, 35(03), 233–46.
Itard, L and Klunder, G (2007) Comparing environmental impacts of renovated housing stock with new construction. Building Research & Information, 35(03), 252–67.
- Type: Journal Article
- Keywords: Building stock; environmental impacts; housing stock; Life Cycle Assessment; renovation; urban renewal; urban sustainability; the Netherlands
- ISBN/ISSN: 0961-3218
- URL: http://www.informaworld.com/openurl?genre=article&title=Building%20Research%20%26amp%3b%20Information&issn=0961%2d3218&volume=35&issue=3&spage=252&epage=267&doi=10%2e1080%2f09613210601068161&date=2007%2d5&atitle=Comparing%20environmental%20impacts%20of%20
- Abstract:
When undertaking urban renewal projects, decisions must be made between housing maintenance with some minor interventions, and total housing redevelopment entailing the demolition of the existing stock and replacement with new houses. Simple renovations are only possible if the quality of the existing dwelling is sufficient to fulfil current needs. In most urban renewal districts in the Netherlands the existing stock does not meet these current needs. That is why large-scale demolition and the construction of new dwellings are undertaken. However, renovation-based strategies could offer more sustainable alternatives. A comparison of the environmental impacts is made between the renewal options of maintenance, consolidation, transformation, and redevelopment for two typical cases of Dutch urban renewal. The environmental effects are calculated using the Life Cycle Assessment method. Results are presented according to the following environmental effects: the quantities of material, the energy and water used, waste, and environmental impacts. The use of environmental impacts gives a more complete picture than the use of quantities. The transformation of the existing housing stock is found to be a much more environmentally efficient way to achieve the same result than are demolition and rebuilding. The embodied and operational energy use is also compared. Due to the relatively short lifetime of post-war dwellings, the embodied energy can amount to 30% of the total energy use. This means that it is worth using construction methods that reduce embodied energy and designing new buildings so that they are flexible.
Jones, W, Gibb, A, Goodier, C and Bust, P (2017) Managing the unknown: Addressing the potential health risks of nanomaterials in the built environment. Construction Management and Economics, 35(03), 122-36.
Liu, J, Gao, R, Cheah, C Y J and Luo, J (2017) Evolutionary game of investors' opportunistic behaviour during the operational period in PPP projects. Construction Management and Economics, 35(03), 137-53.
Loosemore, M and Lim, B T H (2017) Linking corporate social responsibility and organizational performance in the construction industry. Construction Management and Economics, 35(03), 90-105.
Milion, R N, Alves, T d C and Paliari, J C (2017) Impacts of residential construction defects on customer satisfaction. International Journal of Building Pathology and Adaptation, 35(03), 218–32.
Mohamed, M, Pärn, E A and Edwards, D J (2017) Brexit: measuring the impact upon skilled labour in the UK construction industry. International Journal of Building Pathology and Adaptation, 35(03), 264–79.
Nelms, C E, Russell, A D and Lence, B J (2007) Assessing the performance of sustainable technologies: a framework and its application. Building Research & Information, 35(03), 237–51.
Nielsen, K J (2017) A comparison of inspection practices within the construction industry between the Danish and Swedish work environment authorities. Construction Management and Economics, 35(03), 154-69.
Ofori-Boadu, A N, Shofoluwe, M A and Pyle, R (2017) Development of a Housing Eligibility Assessment Scoring Method for low-income urgent repair programs. International Journal of Building Pathology and Adaptation, 35(03), 194–217.
Short, C A, Barrett, P, Dye, A and Sutrisna, M (2007) Impacts of value engineering on five Capital Arts projects. Building Research & Information, 35(03), 287–315.