Abstracts – Browse Results

Search or browse again.

Click on the titles below to expand the information about each abstract.
Viewing 22 results ...

Bakens, W (1997) International trends in research and technology development. Building Research & Information, 25(06), 335–7.

Bowen, P, Akintoye, A, Pearl, R and Edwards, P J (2007) Ethical behaviour in the South African construction industry. Construction Management and Economics, 25(06), 631–48.

Bubshait, A A and Tahir, B M (1997) Effect of silica fume on the concrete-steel bond. Building Research & Information, 25(06), 365–9.

Chan, C T W (2007) Fuzzy procurement selection model for construction projects. Construction Management and Economics, 25(06), 611–8.

Delgado-Hernandez, D J, Bampton, K E and Aspinwall, E (2007) Quality function deployment in construction. Construction Management and Economics, 25(06), 597–609.

Egbu, C O (1997) Refurbishment management: challenges and opportunities. Building Research & Information, 25(06), 338–47.

Enshassi, A (1997) Construction safety issues in Gaza Strip. Building Research & Information, 25(06), 370–3.

Galbraith, G H, McLean, R C and Kelly, D (1997) Moisture permeability measurements under varying barometric pressure. Building Research & Information, 25(06), 348–53.

Goodier, C and Gibb, A (2007) Future opportunities for offsite in the UK. Construction Management and Economics, 25(06), 585–95.

Green, S D and Liu, A M M (2007) Theory and practice in value management: a reply to Ellis et al. (2005). Construction Management and Economics, 25(06), 649–59.

Holt, G D (1997) Classifying construction contractors. Building Research & Information, 25(06), 374–82.

Hu, X and Liu, C (2018) Measuring efficiency, effectiveness and overall performance in the Chinese construction industry. Engineering, Construction and Architectural Management, 25(06), 780–97.

Imriyas, K, Pheng, L S and Teo, E A-L (2007) A framework for computing workers' compensation insurance premiums in construction. Construction Management and Economics, 25(06), 563–84.

Malmberg, F (2007) Introduction of a new form of quote evaluation: a case study in southern Sweden. Construction Management and Economics, 25(06), 661–9.

Modak, J P, Sohoni, V V and Aware, H V (1997) Manually powered manufacture of keyed bricks. Building Research & Information, 25(06), 354–64.

Newaz, M T, Davis, P R, Jefferies, M and Pillay, M (2018) Developing a safety climate factor model in construction research and practice. Engineering, Construction and Architectural Management, 25(06), 738–57.

Oke, A E (2018) Bonding capability of Nigerian contracting firms. Engineering, Construction and Architectural Management, 25(06), 707–20.

  • Type: Journal Article
  • Keywords: Risk management; Guarantee; Bond; Contracting firm; Project stakeholder;
  • ISBN/ISSN: 0969-9988
  • URL: https://doi.org/10.1108/ECAM-01-2016-0007
  • Abstract:
    The ability of construction contractors to engage in construction bond agreement with guarantors depends on capital, experience, capacity and continuity. Using these criteria, the purpose of this paper is to provide insights into the bonding capacity of Nigerian contractors. Design/methodology/approach Factors required for bonding were examined based on a set of questions addressed to managers of contracting firms and personnel involved in issuing bonds and guarantees in commercial banks and insurance companies. The scorecard approach was employed to determine the bonding capability of the contractors. Findings Contractors’ financial strength and past performance on previous projects are the two important factors considered by guarantors in granting bond to contractors. However, the condition surrounding the bond, the legal capacity of the guarantor to issue bond and the identity of the guarantor are mostly considered by contractors in approaching a potential guarantor. Using the scorecard approach, about one-third of contractors have the necessary requirements to engage in construction bond agreement with guarantors. This ability of contractors is affected by years of experience of the firm but not by their location nor years of experience of their manager. Practical implications It is necessary for contracting firms to increase their capital base through merging, borrowing, etc., and also engage experienced professionals and workers in the execution of construction projects, as this will eventually improve their bonding ability. Social implications The study is limited to construction contractors registered with Ondo and Lagos State Governments and guarantors that are banks and insurance companies in Nigeria. Originality/value The paper specified various areas of concerns for Nigerian contracting firms in their bid to enhance their bonding ability. This will help them in overcoming various challenges and bottlenecks that may arise in securing bonds and guarantees from guarantors.

Skitmore, M and Smyth, H (2007) Pricing construction work: a marketing viewpoint. Construction Management and Economics, 25(06), 619–30.

Tripathi, K K and Jha, K N (2018) Application of fuzzy preference relation for evaluating success factors of construction organisations. Engineering, Construction and Architectural Management, 25(06), 758–79.

Umeokafor, N (2018) An investigation into public and private clients’ attitudes, commitment and impact on construction health and safety in Nigeria. Engineering, Construction and Architectural Management, 25(06), 798–815.

Yan, X and Kim, Y (2018) A conceptual framework of ITSMCA for a building collapse accident. Engineering, Construction and Architectural Management, 25(06), 721–37.

Yang, R J, Jayasuriya, S, Gunarathna, C, Arashpour, M, Xue, X and Zhang, G (2018) The evolution of stakeholder management practices in Australian mega construction projects. Engineering, Construction and Architectural Management, 25(06), 690–706.