ARCOM

Search or browse again.

Click on the titles below to expand the information about each abstract.
Viewing 249 results ...

Abbasian-Hosseini, S A, Hsiang, S M, Leming, M L and Liu, M (2014) From Social Network to Data Envelopment Analysis: Identifying Benchmarks at the Site Management Level. Journal of Construction Engineering and Management, 140(08).

• Type: Journal Article
• Keywords: Benchmark; Social factors; Data analysis; Internet; Construction industry; Contract management; Benchmarking; Social network; Data envelopment analysis; Social learning; Construction trades; Labor and personnel issues;
• ISBN/ISSN: 0733-9364
• URL: https://doi.org/10.1061/(ASCE)CO.1943-7862.0000875
• Abstract:
  It is widely accepted in the construction industry that contract documents, specifying the responsibility and risk of each participant, are the basis for project managers’ and superintendents’ decision making (DM). However, in practice strict adherence to the formal procedures and chains of command would not always be possible without an unacceptable expenditure of time and money. Although much attention is given to the decisions at the project manager and superintendent level, the underlying rules and mechanisms for the moment-to-moment DM at the site management level has not been documented. In this paper, a social network (SN)–based data envelopment analysis (DEA) benchmarking procedure (SDBP), which combines DEA (assessing the relative efficiency of DM units) and SN (concentrating on the relationships amongst DM units) to identify the benchmarks for the inefficient specialty trades (STs). This paper also uses a case study to illustrate how to implement the SDBP. This research contributes to the body of knowledge because it combines the DEA and SN analysis for the first time to propose a new method of identifying the improvement direction (benchmarks) for STs of a project. This technique is beneficial to project managers because it (1) untangles the role and effectiveness of the existing interactions and interdependencies among the STs, (2) evaluates the STs’ potential for being benchmarks, and (3) outlines how an inefficient ST can improve its performance through learning from the practices of other good performers (social learning).

Ahadzie, D K, Proverbs, D G and Olomolaiye, P O (2008) Model for Predicting the Performance of Project Managers at the Construction Phase of Mass House Building Projects. Journal of Construction Engineering and Management, 134(08), 618–29.

Ahn, S, Lee, S and Steel, R P (2013) Effects of Workers’ Social Learning: Focusing on Absence Behavior. Journal of Construction Engineering and Management, 139(08), 1015–25.

AlChaer, E and Issa, C A (2020) Engineering Productivity Measurement: A Novel Approach. Journal of Construction Engineering and Management, 146(08).

Allison, L and Kaminsky, J (2017) Safety Communication Networks: Females in Small Work Crews. Journal of Construction Engineering and Management, 143(08).

Anastasopoulos, P C, Labi, S, Bhargava, A, Bordat, C and Mannering, F L (2010) Frequency of Change Orders in Highway Construction Using Alternate Count-Data Modeling Methods. Journal of Construction Engineering and Management, 136(08), 886–93.

Arabi, S, Eshtehardian, E and Shafiei, I (2022) Using Bayesian Networks for Selecting Risk-Response Strategies in Construction Projects. Journal of Construction Engineering and Management, 148(08).

Arambula, E and Gharaibeh, N (2014) Methods for Accumulating Construction and Material Quality Test Results and Their Effect on Acceptance Decisions. Journal of Construction Engineering and Management, 140(08).

Arditi, D and Chotibhongs, R (2005) Issues in Subcontracting Practice. Journal of Construction Engineering and Management, 131(08), 866–76.

Assad, A, Moselhi, O and Zayed, T (2021) Resilience-Driven Sustainability-Based Rehabilitation Planning for Water Distribution Networks. Journal of Construction Engineering and Management, 147(08).

Bademosi, F and Issa, R R A (2021) Factors Influencing Adoption and Integration of Construction Robotics and Automation Technology in the US. Journal of Construction Engineering and Management, 147(08).

Ballesteros-Pérez, P, Skitmore, M, Cerezo-Narváez, A, González-Cruz, M C, Pastor-Fernández, A and Otero-Mateo, M (2021) Standard Deviation of Bids for Construction Contract Auctions. Journal of Construction Engineering and Management, 147(08).

Bayraktar, M E, Arif, F, Ponder, D, Prozzi, J and Mahmoud, N V (2016) Opportunities for Value Extraction Projects in Highway Rights-of-Way and Development of Feasibility Assessment Tool. Journal of Construction Engineering and Management, 142(08).

Behm, M (2012) Safe Design Suggestions for Vegetated Roofs. Journal of Construction Engineering and Management, 138(08), 999–1003.

Bonham, D R, Goodrum, P M, Littlejohn, R and Albattah, M A (2017) Application of Data Mining Techniques to Quantify the Relative Influence of Design and Installation Characteristics on Labor Productivity. Journal of Construction Engineering and Management, 143(08).

BuHamdan, S, Alwisy, A, Bouferguene, A and Al-Hussein, M (2019) Novel Approach to Overcoming Discontinuity in Knowledge: Application in Value-Adding Frameworks in Construction Industry. Journal of Construction Engineering and Management, 145(08).

Cai, H, Kuczek, T, Dunston, P S and Li, S (2017) Correlating Intelligent Compaction Data to In Situ Soil Compaction Quality Measurements. Journal of Construction Engineering and Management, 143(08).

Cai, S, Ma, Z, Skibniewski, M J, Bao, S and Wang, H (2020) Construction Automation and Robotics for High-Rise Buildings: Development Priorities and Key Challenges. Journal of Construction Engineering and Management, 146(08).

Cattell, D W, Bowen, P A and Kaka, A P (2007) Review of Unbalanced Bidding Models in Construction. Journal of Construction Engineering and Management, 133(08), 562–73.

Chan, A P C and Owusu, E K (2017) Corruption Forms in the Construction Industry: Literature Review. Journal of Construction Engineering and Management, 143(08).

Chang, C, Pan, W and Howard, R (2017) Impact of Building Information Modeling Implementation on the Acceptance of Integrated Delivery Systems: Structural Equation Modeling Analysis. Journal of Construction Engineering and Management, 143(08).

Chang, T, Chi, S and Im, S (2022) Understanding User Experience and Satisfaction with Urban Infrastructure through Text Mining of Civil Complaint Data. Journal of Construction Engineering and Management, 148(08).

Chen, J, Taylor, J E and Comu, S (2017) Assessing Task Mental Workload in Construction Projects: A Novel Electroencephalography Approach. Journal of Construction Engineering and Management, 143(08).

Chen, L, Manley, K, Lewis, J, Helfer, F and Widen, K (2018) Procurement and Governance Choices for Collaborative Infrastructure Projects. Journal of Construction Engineering and Management, 144(08).

Chen, X B and Kim, T W (2017) Automated Mapping of User Activities onto Flexible Space in Space-Use Analysis. Journal of Construction Engineering and Management, 143(08).

Chen, Y, Chen, S, Hu, C, Jin, L and Zheng, X (2020) Novel Probabilistic Cost Estimation Model Integrating Risk Allocation and Claim in Hydropower Project. Journal of Construction Engineering and Management, 146(08).

Chen, Y, McCabe, B and Hyatt, D (2017) Relationship between Individual Resilience, Interpersonal Conflicts at Work, and Safety Outcomes of Construction Workers. Journal of Construction Engineering and Management, 143(08).

Cheng, E W L and Li, H (2006) Job Performance Evaluation for Construction Companies: An Analytic Network Process Approach. Journal of Construction Engineering and Management, 132(08), 827–35.

Cheng, E W, Li, H and Fox, P (2007) Job Performance Dimensions for Improving Final Project Outcomes. Journal of Construction Engineering and Management, 133(08), 592–9.

Cheung, S O, Yiu, T W and Lam, M C (2013) Interweaving Trust and Communication with Project Performance. Journal of Construction Engineering and Management, 139(08), 941–50.

Cheung, S O, Yiu, T W and Yeung, S F (2006) A Study of Styles and Outcomes in Construction Dispute Negotiation. Journal of Construction Engineering and Management, 132(08), 805–14.

Chih, Y, Kiazad, K, Cheng, D, Lajom, J A L and Restubog, S L D (2017) Feeling Positive and Productive: Role of Supervisor–Worker Relationship in Predicting Construction Workers’ Performance in the Philippines. Journal of Construction Engineering and Management, 143(08).

Cho, C, Kim, K, Park, J and Cho, Y K (2018) Data-Driven Monitoring System for Preventing the Collapse of Scaffolding Structures. Journal of Construction Engineering and Management, 144(08).

Choi, Y, Kim, D, Kim, S, Nam, M S and Kim, T (2013) Implementation of Noise-Free and Vibration-Free PHC Screw Piles on the Basis of Full-Scale Tests. Journal of Construction Engineering and Management, 139(08), 960–7.

Chung, T H, Mohamed, Y and AbouRizk, S (2006) Bayesian Updating Application into Simulation in the North Edmonton Sanitary Trunk Tunnel Project. Journal of Construction Engineering and Management, 132(08), 882–94.

Clement, D, Aliabadi, A A, Mackey, J, Thé, J and Gharabaghi, B (2021) Dust Emissions Management Model for Construction Sites. Journal of Construction Engineering and Management, 147(08).

da Rocha, C G, Kemmer, S L and Meneses, L (2016) Managing Customization Strategies to Reduce Workflow Variations in House Building Projects. Journal of Construction Engineering and Management, 142(08).

Davis, P R, Jefferies, M and Ke, Y (2017) Psychological Contracts: Framework for Relationships in Construction Procurement. Journal of Construction Engineering and Management, 143(08).

de la Cruz, M P, del Caño, A and de la Cruz, E (2006) Downside Risks in Construction Projects Developed by the Civil Service: The Case of Spain. Journal of Construction Engineering and Management, 132(08), 844–52.

de Lima, R X, Júnior, E F N, Prata, B d A and Weissmann, J (2013) Distribution of Materials in Road Earthmoving and Paving: Mathematical Programming Approach. Journal of Construction Engineering and Management, 139(08), 1046–54.

De Marco, A and Mangano, G (2013) Risk and Value in Privately Financed Health Care Projects. Journal of Construction Engineering and Management, 139(08), 918–26.

Dewlaney, K S, Hallowell, M R and Fortunato, B R (2012) Safety Risk Quantification for High Performance Sustainable Building Construction. Journal of Construction Engineering and Management, 138(08), 964–71.

Diab, M F, Varma, A and Panthi, K (2017) Modeling the Construction Risk Ratings to Estimate the Contingency in Highway Projects. Journal of Construction Engineering and Management, 143(08).

Dias Barkokebas, R, Al-Hussein, M and Li, X (2022) VR–MOCAP-Enabled Ergonomic Risk Assessment of Workstation Prototypes in Offsite Construction. Journal of Construction Engineering and Management, 148(08).

Duffy, G A, Oberlender, G D and Seok Jeong, D H (2011) Linear Scheduling Model with Varying Production Rates. Journal of Construction Engineering and Management, 137(08), 574–82.

Duncheva, T and Bradley, F F (2019) Multifaceted Productivity Comparison of Off-Site Timber Manufacturing Strategies in Mainland Europe and the United Kingdom. Journal of Construction Engineering and Management, 145(08).

Duodu, B and Rowlinson, S (2021) Opening Up the Innovation Process in Construction Firms: External Knowledge Sources and Dual Innovation. Journal of Construction Engineering and Management, 147(08).

Dutta, A, Breloff, S P, Dai, F, Sinsel, E W, Warren, C M, Carey, R E and Wu, J Z (2021) Application of Data Fusion via Canonical Polyadic Decomposition in Risk Assessment of Musculoskeletal Disorders in Construction: Procedure and Stability Evaluation. Journal of Construction Engineering and Management, 147(08).

Easa, S M and Hossain, K M A (2008) New Mathematical Optimization Model for Construction Site Layout. Journal of Construction Engineering and Management, 134(08), 653–62.

Eiris, R, Jain, E, Gheisari, M and Wehle, A (2021) Online Hazard Recognition Training: Comparative Case Study of Static Images, Cinemagraphs, and Videos. Journal of Construction Engineering and Management, 147(08).

El Asmar, M, Lotfallah, W, Whited, G and Hanna, A S (2010) Quantitative Methods for Design-Build Team Selection. Journal of Construction Engineering and Management, 136(08), 904–12.

El-Gohary, K M, Aziz, R F and Abdel-Khalek, H A (2017) Engineering Approach Using ANN to Improve and Predict Construction Labor Productivity under Different Influences. Journal of Construction Engineering and Management, 143(08).

Elbarkouky, M M G and Robinson Fayek, A (2011) Fuzzy Preference Relations Consensus Approach to Reduce Conflicts on Shared Responsibilities in the Owner Managing Contractor Delivery System. Journal of Construction Engineering and Management, 137(08), 609–18.

Elghamrawy, T, El-Rayes, K, Liu, L and Odeh, I (2012) Performance of Temporary Rumble Strips at the Edge of Highway Construction Zones. Journal of Construction Engineering and Management, 138(08), 923–30.

Elyamany, A, Basha, I and Zayed, T (2007) Performance Evaluating Model for Construction Companies: Egyptian Case Study. Journal of Construction Engineering and Management, 133(08), 574–81.

Esmaeili, B and Hallowell, M R (2012) Diffusion of Safety Innovations in the Construction Industry. Journal of Construction Engineering and Management, 138(08), 955–63.

Esmaeili, B, Hallowell, M R and Rajagopalan, B (2015) Attribute-Based Safety Risk Assessment. I: Analysis at the Fundamental Level. Journal of Construction Engineering and Management, 141(08).

Esmaeili, B, Hallowell, M R and Rajagopalan, B (2015) Attribute-Based Safety Risk Assessment. II: Predicting Safety Outcomes Using Generalized Linear Models. Journal of Construction Engineering and Management, 141(08).

Ezzeddine, A, Shehab, L, Lucko, G and Hamzeh, F (2022) Forecasting Construction Project Performance with Momentum Using Singularity Functions in LPS. Journal of Construction Engineering and Management, 148(08).

Faghih, S A M and Kashani, H (2018) Forecasting Construction Material Prices Using Vector Error Correction Model. Journal of Construction Engineering and Management, 144(08).

Faust, K M and Kaminsky, J A (2017) Building Water and Wastewater System Resilience to Disaster Migration: Utility Perspectives. Journal of Construction Engineering and Management, 143(08).

Fayek, A R and Oduba, A (2005) Predicting Industrial Construction Labor Productivity Using Fuzzy Expert Systems. Journal of Construction Engineering and Management, 131(08), 938–41.

Feng, K, Wang, S, Lu, W, Liu, C and Wang, Y (2022) Planning Construction Projects in Deep Uncertainty: A Data-Driven Uncertainty Analysis Approach. Journal of Construction Engineering and Management, 148(08).

Fisher, D J, Schluter, L and Toleti, P K (2005) Project Management Education and Training Process for Career Development. Journal of Construction Engineering and Management, 131(08), 903–10.

Forcada, N, Gangolells, M, Casals, M and Macarulla, M (2017) Factors Affecting Rework Costs in Construction. Journal of Construction Engineering and Management, 143(08).

Garrett, J W and Teizer, J (2009) Human Factors Analysis Classification System Relating to Human Error Awareness Taxonomy in Construction Safety. Journal of Construction Engineering and Management, 135(08), 754–63.

Genc, O (2021) SymbioConstruction: A Bibliography-Driven Dynamic Construction Industry Symbiosis Database. Journal of Construction Engineering and Management, 147(08).

Ghanbaripour, A N, Langston, C and Yousefi, A (2017) Implementation of 3D Integration Model for Project Delivery Success: Case Study. Journal of Construction Engineering and Management, 143(08).

Gharaibeh, H M (2013) Managing the Cost of Power Transmission Projects: Lessons Learned. Journal of Construction Engineering and Management, 139(08), 1063–7.

Giritli, H and Civan, I (2008) Personality Study of Construction Professionals in the Turkish Construction Industry. Journal of Construction Engineering and Management, 134(08), 630–4.

Girmscheid, G (2009) NPV Model for Evaluating the Economic Efficiency of Municipal Street Maintenance by Private Providers. Journal of Construction Engineering and Management, 135(08), 701–9.

Golabchi, A, Han, S, Seo, J, Han, S, Lee, S and Al-Hussein, M (2015) An Automated Biomechanical Simulation Approach to Ergonomic Job Analysis for Workplace Design. Journal of Construction Engineering and Management, 141(08).

Gomes Araújo, L and Lucko, G (2022) Best Practices for Case Studies in Construction Engineering and Management Research. Journal of Construction Engineering and Management, 148(08).

González-Jorge, H, Martínez Sánchez, J, Díaz-Vilariño, L, Puente, I and Arias, P (2016) Automatic Registration of Mobile LiDAR Data Using High-Reflectivity Traffic Signs. Journal of Construction Engineering and Management, 142(08).

Gunhan, S and Arditi, D (2005) International Expansion Decision for Construction Companies. Journal of Construction Engineering and Management, 131(08), 928–37.

Hajifathalian, K, Howell, G, Wambeke, B W, Hsiang, S M and Liu, M (2016) “Oops” Simulation: Cost–Benefits Trade-Off Analysis of Reliable Planning for Construction Activities. Journal of Construction Engineering and Management, 142(08).

Hallowell, M R (2011) Risk-Based Framework for Safety Investment in Construction Organizations. Journal of Construction Engineering and Management, 137(08), 592–9.

Han, Y, Li, Y, Rao, P and Taylor, J E (2021) Global Collaborative Network of Skyscraper Projects from 1990 to 2010: Temporal Evolution and Spatial Characteristics. Journal of Construction Engineering and Management, 147(08).

Han, Y, Yin, Z, Zhang, J, Jin, R and Yang, T (2020) Eye-Tracking Experimental Study Investigating the Influence Factors of Construction Safety Hazard Recognition. Journal of Construction Engineering and Management, 146(08).

Hanna, A S, Ibrahim, M W, Lotfallah, W, Iskandar, K A and Russell, J S (2016) Modeling Project Manager Competency: An Integrated Mathematical Approach. Journal of Construction Engineering and Management, 142(08).

Hanna, A S, Lotfallah, W, Aoun, D G and Asmar, M E (2014) Mathematical Formulation of the Project Quarterback Rating: New Framework to Assess Construction Project Performance. Journal of Construction Engineering and Management, 140(08).

Hashemi, H, Mousavi, S M and Mojtahedi, S M H (2011) Bootstrap Technique for Risk Analysis with Interval Numbers in Bridge Construction Projects. Journal of Construction Engineering and Management, 137(08), 600–8.

Heaton, R, Martin, H, Chadee, A, Milling, A, Dunne, S and Borthwick, F (2022) The Construction Materials Conundrum: Practical Solutions to Address Integrated Supply Chain Complexities. Journal of Construction Engineering and Management, 148(08).

Hegazy, T and Menesi, W (2008) Delay Analysis under Multiple Baseline Updates. Journal of Construction Engineering and Management, 134(08), 575–82.

Hildreth, J, Vorster, M and Martinez, J (2005) Reduction of Short-Interval GPS Data for Construction Operations Analysis. Journal of Construction Engineering and Management, 131(08), 920–7.

Horta, I M, Camanho, A S and Lima, A F (2013) Design of Performance Assessment System for Selection of Contractors in Construction Industry E-Marketplaces. Journal of Construction Engineering and Management, 139(08), 910–7.

Hosseini, M R, Maghrebi, M, Akbarnezhad, A, Martek, I and Arashpour, M (2018) Analysis of Citation Networks in Building Information Modeling Research. Journal of Construction Engineering and Management, 144(08).

Hosseinian, S M and Carmichael, D G (2013) Optimal Incentive Contract with Risk-Neutral Contractor. Journal of Construction Engineering and Management, 139(08), 899–909.

Hu, X, Chong, H, Wang, X and London, K (2019) Understanding Stakeholders in Off-Site Manufacturing: A Literature Review. Journal of Construction Engineering and Management, 145(08).

Hu, Y, Castro-Lacouture, D, Eastman, C M and Navathe, S B (2021) Component Change List Prediction for BIM-Based Clash Resolution from a Graph Perspective. Journal of Construction Engineering and Management, 147(08).

Huang, Y, Trinh, M T and Le, T (2021) Critical Factors Affecting Intention of Use of Augmented Hearing Protection Technology in Construction. Journal of Construction Engineering and Management, 147(08).

Hwang, S, Park, M, Lee, H and Lee, S (2016) Hybrid Simulation Framework for Immediate Facility Restoration Planning after a Catastrophic Disaster. Journal of Construction Engineering and Management, 142(08).

Ibrahim, M W, Hanna, A S, Russell, J S, Abotaleb, I S and El-adaway, I H (2020) Quantitative Analysis of the Impacts of Out-of-Sequence Work on Project Performance. Journal of Construction Engineering and Management, 146(08).

Ikpe, E, Hammon, F and Oloke, D (2012) Cost-Benefit Analysis for Accident Prevention in Construction Projects. Journal of Construction Engineering and Management, 138(08), 991–8.

Imbeah, W and Guikema, S (2009) Managing Construction Projects Using the Advanced Programmatic Risk Analysis and Management Model. Journal of Construction Engineering and Management, 135(08), 772–81.

Imriyas, K, Low, S P, Teo, A L and Chan, S L (2008) Premium-Rating Model for Workers’ Compensation Insurance in Construction. Journal of Construction Engineering and Management, 134(08), 601–17.

Islam, M M and Mohamed, S (2009) Bid-Winning Potential Optimization for Concession Schemes with Imprecise Investment Parameters. Journal of Construction Engineering and Management, 135(08), 690–700.

Islam, M S, Mohandes, S R, Mahdiyar, A, Fallahpour, A and Olanipekun, A O (2022) A Coupled Genetic Programming Monte Carlo Simulation–Based Model for Cost Overrun Prediction of Thermal Power Plant Projects. Journal of Construction Engineering and Management, 148(08).

Iyer, K C and Jha, K N (2006) Critical Factors Affecting Schedule Performance: Evidence from Indian Construction Projects. Journal of Construction Engineering and Management, 132(08), 871–81.

JaÅ›kowski, P and Sobotka, A (2006) Scheduling Construction Projects Using Evolutionary Algorithm. Journal of Construction Engineering and Management, 132(08), 861–70.

Jafari, A, Valentin, V and Berrens, R P (2017) Estimating the Economic Value of Energy Improvements in U.S. Residential Housing. Journal of Construction Engineering and Management, 143(08).

Ji, S, Park, M and Lee, H (2010) Data Preprocessing–Based Parametric Cost Model for Building Projects: Case Studies of Korean Construction Projects. Journal of Construction Engineering and Management, 136(08), 844–53.

Ji, W and AbouRizk, S M (2018) Data-Driven Simulation Model for Quality-Induced Rework Cost Estimation and Control Using Absorbing Markov Chains. Journal of Construction Engineering and Management, 144(08).

Ji, W, AbouRizk, S M, Zaïane, O R and Li, Y (2018) Complexity Analysis Approach for Prefabricated Construction Products Using Uncertain Data Clustering. Journal of Construction Engineering and Management, 144(08).

Jiang, Y and Bai, Y (2020) Estimation of Construction Site Elevations Using Drone-Based Orthoimagery and Deep Learning. Journal of Construction Engineering and Management, 146(08).

Jin, R, Zuo, J and Jong, J (2019) Scientometric Review of Articles Published in ASCE’s Journal of Construction Engineering and Management from 2000 to 2018. Journal of Construction Engineering and Management, 145(08), 06019001.

Kaiser, M J and Iledare, W O (2006) The Gulf of Mexico Decommissioning Market. Journal of Construction Engineering and Management, 132(08), 815–26.

Kammouh, O, Nogal, M, Binnekamp, R and Wolfert, A R M ( (2021) Mitigation Controller: Adaptive Simulation Approach for Planning Control Measures in Large Construction Projects. Journal of Construction Engineering and Management, 147(08).

Kang, Y, Siddiqui, S, Suk, S J, Chi, S and Kim, C (2017) Trends of Fall Accidents in the U.S. Construction Industry. Journal of Construction Engineering and Management, 143(08).

Kataoka, M (2008) Automated Generation of Construction Plans from Primitive Geometries. Journal of Construction Engineering and Management, 134(08), 592–600.

Kazar, G and Comu, S (2021) Effectiveness of Serious Games for Safety Training: A Mixed Method Study. Journal of Construction Engineering and Management, 147(08).

Kent, D C and Becerik-Gerber, B (2010) Understanding Construction Industry Experience and Attitudes toward Integrated Project Delivery. Journal of Construction Engineering and Management, 136(08), 815–25.

Kifokeris, D and Xenidis, Y (2017) Constructability: Outline of Past, Present, and Future Research. Journal of Construction Engineering and Management, 143(08).

Kim, B and Kim, S J (2015) Credibility Evaluation of Project Duration Forecast Using Forecast Sensitivity and Forecast-Risk Compatibility. Journal of Construction Engineering and Management, 141(08).

Kim, B and Reinschmidt, K F (2010) Probabilistic Forecasting of Project Duration Using Kalman Filter and the Earned Value Method. Journal of Construction Engineering and Management, 136(08), 834–43.

Kim, B, Lee, H, Park, H and Kim, H (2012) Greenhouse Gas Emissions from Onsite Equipment Usage in Road Construction. Journal of Construction Engineering and Management, 138(08), 982–90.

Kim, J J, Miller, J A and Kim, S (2020) Cost Impacts of Change Orders due to Unforeseen Existing Conditions in Building Renovation Projects. Journal of Construction Engineering and Management, 146(08).

Kim, K, Cho, Y and Kim, K (2018) BIM-Driven Automated Decision Support System for Safety Planning of Temporary Structures. Journal of Construction Engineering and Management, 144(08).

Kim, T W and Fischer, M (2014) Ontology for Representing Building Users’ Activities in Space-Use Analysis. Journal of Construction Engineering and Management, 140(08).

Koo, D and Ariaratnam, S T (2008) Application of a Sustainability Model for Assessing Water Main Replacement Options. Journal of Construction Engineering and Management, 134(08), 563–74.

Koo, H J and O’Connor, J T (2022) A Strategy for Building Design Quality Improvement through BIM Capability Analysis. Journal of Construction Engineering and Management, 148(08).

Korkmaz, S, Riley, D and Horman, M (2010) Piloting Evaluation Metrics for Sustainable High-Performance Building Project Delivery. Journal of Construction Engineering and Management, 136(08), 877–85.

Kululanga, G K and Price, A D (2005) Measuring Quality of Writing of Construction Specifications. Journal of Construction Engineering and Management, 131(08), 859–65.

Kwon, N, Cho, J, Lee, H, Yoon, I and Park, M (2019) Compensation Cost Estimation Model for Construction Noise Claims Using Case-Based Reasoning. Journal of Construction Engineering and Management, 145(08).

Lai, A W Y and Pang, P S M (2010) Measuring Performance for Building Maintenance Providers. Journal of Construction Engineering and Management, 136(08), 864–76.

Laryea, S (2013) Nature of Tender Review Meetings. Journal of Construction Engineering and Management, 139(08), 927–40.

Lau, S, Lu, M and Poon, C (2014) Formalized Approach to Discretize a Continuous Plant in Construction Simulations. Journal of Construction Engineering and Management, 140(08).

Le, C, Jeong, H D, Damnjanovic, I and Bukkapatnam, S (2022) Pareto Principle in Scoping-Phase Cost Estimating: A Multiobjective Optimization Approach for Selecting and Applying Optimal Major Work Items. Journal of Construction Engineering and Management, 148(08).

Le, C, Le, T, Jeong, H D and Lee, E (2019) Geographic Information System–Based Framework for Estimating and Visualizing Unit Prices of Highway Work Items. Journal of Construction Engineering and Management, 145(08).

Lee, B, Lee, H, Park, M and Kim, H (2015) Influence Factors of Learning-Curve Effect in High-Rise Building Constructions. Journal of Construction Engineering and Management, 141(08).

Lee, C, Chong, H, Tanko, B L and Klufallah, M (2022) Effect between Trust in Communication Technology and Interorganizational Trust in BIM-Enabled Projects. Journal of Construction Engineering and Management, 148(08).

Lee, G H, Kim, J I, Koo, C and Kim, T W (2022) Automated Generation of Precast Concrete Slab Stacks for Transportation in Offsite Construction Projects. Journal of Construction Engineering and Management, 148(08).

Lee, J (2018) Value Engineering for Defect Prevention on Building Façade. Journal of Construction Engineering and Management, 144(08).

Lee, N and Rojas, E M (2013) Visual Representations for Monitoring Project Performance: Developing Novel Prototypes for Improved Communication. Journal of Construction Engineering and Management, 139(08), 994–1005.

Lee, S, Peña-Mora, F and Park, M (2005) Quality and Change Management Model for Large Scale Concurrent Design and Construction Projects. Journal of Construction Engineering and Management, 131(08), 890–902.

Leung, M, Chan, Y and Olomolaiye, P (2008) Impact of Stress on the Performance of Construction Project Managers. Journal of Construction Engineering and Management, 134(08), 644–52.

Leung, M, Chan, Y, Chong, A and Sham, J F (2008) Developing Structural Integrated Stressor–Stress Models for Clients’ and Contractors’ Cost Engineers. Journal of Construction Engineering and Management, 134(08), 635–43.

Li, H, Lv, L, Zuo, J, Su, L, Wang, L and Yuan, C (2020) Dynamic Reputation Incentive Mechanism for Urban Water Environment Treatment PPP Projects. Journal of Construction Engineering and Management, 146(08).

Li, J, Wang, H, Xie, Y and Zeng, W (2020) Human Error Identification and Analysis for Shield Machine Operation Using an Adapted TRACEr Method. Journal of Construction Engineering and Management, 146(08).

Liu, Y, Habibnezhad, M, Shayesteh, S, Jebelli, H and Lee, S (2021) Paving the Way for Future EEG Studies in Construction: Dependent Component Analysis for Automatic Ocular Artifact Removal from Brainwave Signals. Journal of Construction Engineering and Management, 147(08).

Liu, Y, Yao, F, Ji, Y, Tong, W, Liu, G, Li, H X and Hu, X (2022) Quality Control for Offsite Construction: Review and Future Directions. Journal of Construction Engineering and Management, 148(08).

Loudoun, R and Markwell, K (2017) Energy Drink Consumption in the Australian Construction Industry: A Risky New Trend?. Journal of Construction Engineering and Management, 143(08).

Love, P E D and Teo, P (2017) Statistical Analysis of Injury and Nonconformance Frequencies in Construction: Negative Binomial Regression Model. Journal of Construction Engineering and Management, 143(08).

Love, P E D, Teo, P, Morrison, J and Grove, M (2016) Quality and Safety in Construction: Creating a No-Harm Environment. Journal of Construction Engineering and Management, 142(08).

Lu, Y, Cui, Q and Le, Y (2013) Turning Green to Gold in the Construction Industry: Fable or Fact?. Journal of Construction Engineering and Management, 139(08), 1026–36.

Luo, X, Li, H, Huang, T and Skitmore, M (2016) Quantifying Hazard Exposure Using Real-Time Location Data of Construction Workforce and Equipment. Journal of Construction Engineering and Management, 142(08).

Macarulla, M, Forcada, N, Casals, M, Gangolells, M, Fuertes, A and Roca, X (2013) Standardizing Housing Defects: Classification, Validation, and Benefits. Journal of Construction Engineering and Management, 139(08), 968–76.

Maemura, Y, Kim, E and Ozawa, K (2018) Root Causes of Recurring Contractual Conflicts in International Construction Projects: Five Case Studies from Vietnam. Journal of Construction Engineering and Management, 144(08).

Manley, K, McFallan, S and Kajewski, S (2009) Relationship between Construction Firm Strategies and Innovation Outcomes. Journal of Construction Engineering and Management, 135(08), 764–71.

Marín, L S and Roelofs, C (2017) Promoting Construction Supervisors’ Safety-Efficacy to Improve Safety Climate: Training Intervention Trial. Journal of Construction Engineering and Management, 143(08).

Marks, E D, Cheng, T and Teizer, J (2013) Laser Scanning for Safe Equipment Design That Increases Operator Visibility by Measuring Blind Spots. Journal of Construction Engineering and Management, 139(08), 1006–14.

Marzouk, M, Said, H and El-Said, M (2009) Framework for Multiobjective Optimization of Launching Girder Bridges. Journal of Construction Engineering and Management, 135(08), 791–800.

Mello Saraiva Caldeira, L M and Brito, A (2014) Use of Soil-Rock Mixtures in Dam Construction. Journal of Construction Engineering and Management, 140(08).

Minchin, R E, Thurn, S B, Ellis, R D and Lewis, D W (2013) Using Contractor Bid Amounts to Estimate the Impact of Night Construction on Cost for Transportation Construction. Journal of Construction Engineering and Management, 139(08), 1055–62.

Mmereki, D and Brouwer, D (2022) Application of Innovative Materials and Methods in Green Buildings and Associated Occupational Exposure and Health of Construction Workers: A Systematic Literature Review. Journal of Construction Engineering and Management, 148(08).

Mostafavi, A and Karamouz, M (2010) Selecting Appropriate Project Delivery System: Fuzzy Approach with Risk Analysis. Journal of Construction Engineering and Management, 136(08), 923–30.

Mostafavi, A, Abraham, D, Noureldin, S, Pankow, G, Novak, J, Walker, R, Hall, K and George, B (2013) Risk-Based Protocol for Inspection of Transportation Construction Projects Undertaken by State Departments of Transportation. Journal of Construction Engineering and Management, 139(08), 977–86.

Moussourakis, J and Haksever, C (2007) Models for Accurate Computation of Earliest and Latest Start Times and Optimal Compression in Project Networks. Journal of Construction Engineering and Management, 133(08), 600–8.

Naderpajouh, N, Mahdavi, A, Hastak, M and Aldrich, D P (2014) Modeling Social Opposition to Infrastructure Development. Journal of Construction Engineering and Management, 140(08).

Nasrazadani, H, Mahsuli, M, Talebiyan, H and Kashani, H (2017) Probabilistic Modeling Framework for Prediction of Seismic Retrofit Cost of Buildings. Journal of Construction Engineering and Management, 143(08).

Nassar, K and Hosny, O (2012) Solving the Least-Cost Route Cut and Fill Sequencing Problem Using Particle Swarm. Journal of Construction Engineering and Management, 138(08), 931–42.

Nassar, N and AbouRizk, S (2016) Introduction to Techniques for Resolving Project Performance Contradictions. Journal of Construction Engineering and Management, 142(08).

Naumets, S and Lu, M (2021) Investigation into Explainable Regression Trees for Construction Engineering Applications. Journal of Construction Engineering and Management, 147(08).

Nguyen, H D, Nguyen, L D, Chih, Y and Le-Hoai, L (2017) Influence of Participants’ Characteristics on Sustainable Building Practices in Emerging Economies: Empirical Case Study. Journal of Construction Engineering and Management, 143(08).

Nguyen, L D and Ibbs, W (2010)  Case Law and Variations in Cumulative Impact Productivity Claims. Journal of Construction Engineering and Management, 136(08), 826–33.

Nguyen, L D, Phan, D H and Tang, L C M (2013) Simulating Construction Duration for Multistory Buildings with Controlling Activities. Journal of Construction Engineering and Management, 139(08), 951–9.

Ozdemir, B and Kumral, M (2017) Stochastic Assessment of the Material Haulage Efficiency in the Earthmoving Industry. Journal of Construction Engineering and Management, 143(08).

Perttula, P, Korhonen, P, Lehtelä, J, Rasa, P, Kitinoja, J, Mäkimattila, S and Leskinen, T (2006) Improving the Safety and Efficiency of Materials Transfer at a Construction Site by Using an Elevator. Journal of Construction Engineering and Management, 132(08), 836–43.

Poleacovschi, C and Javernick-Will, A (2017) Who Are the Experts? Assessing Expertise in Construction and Engineering Organizations. Journal of Construction Engineering and Management, 143(08).

Pomares, J C, González, A and Saura, P (2018) Simple and Resistant Construction Built with Concrete Voussoirs for Developing Countries. Journal of Construction Engineering and Management, 144(08).

Pomares, J C, Irles, R, Segovia, E and Ferrer, B (2014) Acceleration and Deflection Analysis for Class C Edge Protection Systems in Construction Work. Journal of Construction Engineering and Management, 140(08).

Porwal, A and Hewage, K N (2012) Building Information Modeling–Based Analysis to Minimize Waste Rate of Structural Reinforcement. Journal of Construction Engineering and Management, 138(08), 943–54.

Puddicombe, M S (2009) Why Contracts: Evidence. Journal of Construction Engineering and Management, 135(08), 675–82.

Pulaski, M H and Horman, M J (2005) Organizing Constructability Knowledge for Design. Journal of Construction Engineering and Management, 131(08), 911–9.

Puri, V and Martinez, J C (2013) Modeling of Simultaneously Continuous and Stochastic Construction Activities for Simulation. Journal of Construction Engineering and Management, 139(08), 1037–45.

Qian, Q and Zhang, L (2018) Impact of Regulatory Focus on Choice of Project-Governance Modes: Role of Tolerance of Opportunistic Behavior. Journal of Construction Engineering and Management, 144(08).

Qiao, Y, Fricker, J D and Labi, S (2019) Influence of Project Bundling on Maintenance of Traffic Costs across Highway Project Types. Journal of Construction Engineering and Management, 145(08).

Ragab, M A and Marzouk, M (2021) BIM Adoption in Construction Contracts: Content Analysis Approach. Journal of Construction Engineering and Management, 147(08).

Riley, D R, Varadan, P, James, J S and Thomas, H R (2005) Benefit-Cost Metrics for Design Coordination of Mechanical, Electrical, and Plumbing Systems in Multistory Buildings. Journal of Construction Engineering and Management, 131(08), 877–89.

Rosner, J W, Thal, A E and West, C J (2009) Analysis of the Design-Build Delivery Method in Air Force Construction Projects. Journal of Construction Engineering and Management, 135(08), 710–7.

Ryu, J, Alwasel, A, Haas, C T and Abdel-Rahman, E (2020) Analysis of Relationships between Body Load and Training, Work Methods, and Work Rate: Overcoming the Novice Mason’s Risk Hump. Journal of Construction Engineering and Management, 146(08).

Sacks, R, Rozenfeld, O and Rosenfeld, Y (2009) Spatial and Temporal Exposure to Safety Hazards in Construction. Journal of Construction Engineering and Management, 135(08), 726–36.

Schöttle, A and Arroyo, P (2017) Comparison of Weighting-Rating-Calculating, Best Value, and Choosing by Advantages for Bidder Selection. Journal of Construction Engineering and Management, 143(08).

Selçuk Çıdık, M, Boyd, D and Thurairajah, N (2017) Innovative Capability of Building Information Modeling in Construction Design. Journal of Construction Engineering and Management, 143(08).

Senouci, A and El-Rayes, K (2009) Time-Profit Trade-Off Analysis for Construction Projects. Journal of Construction Engineering and Management, 135(08), 718–25.

Seyis, S (2019) Pros and Cons of Using Building Information Modeling in the AEC Industry. Journal of Construction Engineering and Management, 145(08).

Sherman, R, Gibson, G E, Merrow, E and Parrish, K (2021) Examining the Impact of Rate-of-Return Regulation on Capital Project Planning. Journal of Construction Engineering and Management, 147(08).

Shrestha, K J, Jeong, H D and Gransberg, D D (2017) Multidimensional Highway Construction Cost Indexes Using Dynamic Item Basket. Journal of Construction Engineering and Management, 143(08).

Siebelink, S, Voordijk, J T and Adriaanse, A (2018) Developing and Testing a Tool to Evaluate BIM Maturity: Sectoral Analysis in the Dutch Construction Industry. Journal of Construction Engineering and Management, 144(08).

Simmons, D R, Polmear, M, Bae, H and McCall, C (2022) Applying a New Lens: Using Photo Elicitation in Construction Engineering Management Research. Journal of Construction Engineering and Management, 148(08).

Singhaputtangkul, N and Zhao, X (2016) Applying a Fuzzy Consensus Scheme to Enhance the Group Decision Making of a Building Envelope Design Team. Journal of Construction Engineering and Management, 142(08).

Son, J and Rojas, E M (2011) Evolution of Collaboration in Temporary Project Teams: An Agent-Based Modeling and Simulation Approach. Journal of Construction Engineering and Management, 137(08), 619–28.

Son, J, O’Brien, W J and Thomas, S R (2022) Recommended Practices for Effective Management of Academia–Industry Collaborative Research Teams in Construction Management. Journal of Construction Engineering and Management, 148(08).

Sonmez, R, Aminbakhsh, S and Atan, T (2020) Activity Uncrashing Heuristic with Noncritical Activity Rescheduling Method for the Discrete Time-Cost Trade-Off Problem. Journal of Construction Engineering and Management, 146(08).

Sousa, V, Almeida, N M and Dias, L A (2014) Role of Statistics and Engineering Judgment in Developing Optimized Time-Cost Relationship Models. Journal of Construction Engineering and Management, 140(08).

Su, C T, Santoro, M C and Mendes, A B (2018) Constructive Heuristics for Project Scheduling Resource Availability Cost Problem with Tardiness. Journal of Construction Engineering and Management, 144(08).

Sundararajan, S K and Tseng, C (2017) Managing Project Performance Risks under Uncertainty: Using a Dynamic Capital Structure Approach in Infrastructure Project Financing. Journal of Construction Engineering and Management, 143(08).

Tabish, S Z S and Jha, K N (2018) Beyond the Iron Triangle in Public Construction Projects. Journal of Construction Engineering and Management, 144(08).

Tan, T, Lu, W, Tan, G, Xue, F, Chen, K, Xu, J, Wang, J and Gao, S (2020) Construction-Oriented Design for Manufacture and Assembly Guidelines. Journal of Construction Engineering and Management, 146(08).

Tatari, O and Kucukvar, M (2012) Sustainability Assessment of U.S. Construction Sectors: Ecosystems Perspective. Journal of Construction Engineering and Management, 138(08), 918–22.

Taylor, T R B, Ford, D N and Reinschmidt, K F (2012) Impact of Public Policy and Societal Risk Perception on U.S. Civilian Nuclear Power Plant Construction. Journal of Construction Engineering and Management, 138(08), 972–81.

Techera, U, Hallowell, M, Littlejohn, R and Rajendran, S (2018) Measuring and Predicting Fatigue in Construction: Empirical Field Study. Journal of Construction Engineering and Management, 144(08).

Teo, E A L, Chan, S L and Tan, P H (2007) Empirical Investigation into Factors Affecting Exporting Construction Services in SMEs in Singapore. Journal of Construction Engineering and Management, 133(08), 582–91.

Tetteh, M O, Chan, A P C, Darko, A, Torku, A and Nani, G (2021) Critical Barriers to International Construction Joint Ventures Success: Multiexpert Views and Contextual Disparities. Journal of Construction Engineering and Management, 147(08).

Thomas, H R and Ellis, R D (2007) Contractor Prebid Planning Principles. Journal of Construction Engineering and Management, 133(08), 542–52.

Touran, A and Lopez, R (2006) Modeling Cost Escalation in Large Infrastructure Projects. Journal of Construction Engineering and Management, 132(08), 853–60.

Tymvios, N and Gambatese, J A (2016) Direction for Generating Interest for Design for Construction Worker Safety—A Delphi Study. Journal of Construction Engineering and Management, 142(08).

Ugwu, O O, Arop, J B, Nwoji, C U and Osadebe, N N (2013) Nanotechnology as a Preventive Engineering Solution to Highway Infrastructure Failures. Journal of Construction Engineering and Management, 139(08), 987–93.

Vassallo, J M (2007) Implementation of Quality Criteria in Tendering and Regulating Infrastructure Management Contracts. Journal of Construction Engineering and Management, 133(08), 553–61.

Waara, F and Bröchner, J (2006) Price and Nonprice Criteria for Contractor Selection. Journal of Construction Engineering and Management, 132(08), 797–804.

Walters, R, Jaselskis, E, Zhang, J, Mueller, K and Kaewmoracharoen, M (2008) Using Scanning Lasers to Determine the Thickness of Concrete Pavement. Journal of Construction Engineering and Management, 134(08), 583–91.

Wang, X, Huang, X, Luo, Y, Pei, J and Xu, M (2018) Improving Workplace Hazard Identification Performance Using Data Mining. Journal of Construction Engineering and Management, 144(08).

Wang, Y, Shao, Z and Tiong, R L K (2021) Data-Driven Prediction of Contract Failure of Public-Private Partnership Projects. Journal of Construction Engineering and Management, 147(08).

Wang, Y, Thangasamy, V K, Tiong, R L K and Zhang, L (2022) Improved Workflow for Precast Element Design Based on BIM and Lean Construction. Journal of Construction Engineering and Management, 148(08).

Weidman, J, Dickerson, D E and Koebel, C T (2016) Effective Intervention Strategy to Improve Worker Readiness to Adopt Ventilated Tools. Journal of Construction Engineering and Management, 142(08).

Wu, C, Song, X, Wang, T and Fang, D (2015) Core Dimensions of the Construction Safety Climate for a Standardized Safety-Climate Measurement. Journal of Construction Engineering and Management, 141(08).

Wu, J, Kumaraswamy, M M and Soo, G (2011) Regulative Measures Addressing Payment Problems in the Construction Industry: A Calculative Understanding of Their Potential Outcomes Based on Gametric Models. Journal of Construction Engineering and Management, 137(08), 566–73.

Wu, W, Mayo, G, McCuen, T L, Issa, R R A and Smith, D K (2018) Building Information Modeling Body of Knowledge. I: Background, Framework, and Initial Development. Journal of Construction Engineering and Management, 144(08).

Wu, W, Mayo, G, McCuen, T L, Issa, R R A and Smith, D K (2018) Building Information Modeling Body of Knowledge. II: Consensus Building and Use Cases. Journal of Construction Engineering and Management, 144(08).

Xia, B, Skitmore, M, Wu, P and Chen, Q (2014) How Public Owners Communicate the Sustainability Requirements of Green Design-Build Projects. Journal of Construction Engineering and Management, 140(08).

Xia, N, Zhong, R, Wu, C, Wang, X and Wang, S (2017) Assessment of Stakeholder-Related Risks in Construction Projects: Integrated Analyses of Risk Attributes and Stakeholder Influences. Journal of Construction Engineering and Management, 143(08).

Xia, P, Xu, F, Zhou, T and Du, J (2022) Benchmarking Human versus Robot Performance in Emergency Structural Inspection. Journal of Construction Engineering and Management, 148(08).

Xie, W, Zhao, T, Tang, J and Zhang, Y (2017) Arch First and Beam Later: Arch-Rib Integral Installation Construction Technology for Large-Span Tied-Arch Bridge. Journal of Construction Engineering and Management, 143(08).

Xiong, W and Zhang, X (2016) The Real Option Value of Renegotiation in Public–Private Partnerships. Journal of Construction Engineering and Management, 142(08).

Xu, J and Zhao, S (2017) Noncooperative Game-Based Equilibrium Strategy to Address the Conflict between a Construction Company and Selected Suppliers. Journal of Construction Engineering and Management, 143(08).

Xu, Y, Chan, A P C and Yeung, J F Y (2010) Developing a Fuzzy Risk Allocation Model for PPP Projects in China. Journal of Construction Engineering and Management, 136(08), 894–903.

Yang, J and Tsai, M (2011) Computerizing ICBF Method for Schedule Delay Analysis. Journal of Construction Engineering and Management, 137(08), 583–91.

Yeoh, J K W and Chua, D K H (2017) Optimizing Crane Selection and Location for Multistage Construction Using a Four-Dimensional Set Cover Approach. Journal of Construction Engineering and Management, 143(08).

Yevu, S K, Yu, A T W, Darko, A and Addy, M N (2021) Evaluation Model for Influences of Driving Forces for Electronic Procurement Systems Application in Ghanaian Construction Projects. Journal of Construction Engineering and Management, 147(08).

Yin, X, Chen, Y, Bouferguene, A, Zaman, H, Al-Hussein, M and Russell, R (2020) Data-Driven Framework for Modeling Productivity of Closed-Circuit Television Recording Process for Sewer Pipes. Journal of Construction Engineering and Management, 146(08).

Yip, B and Rowlinson, S (2009) Job Redesign as an Intervention Strategy of Burnout: Organizational Perspective. Journal of Construction Engineering and Management, 135(08), 737–45.

Yiu, T W and Lai, W Y (2009) Efficacy of Trust-Building Tactics in Construction Mediation. Journal of Construction Engineering and Management, 135(08), 683–9.

Yu, H, Tweed, T, Al-Hussein, M and Nasseri, R (2009) Development of Lean Model for House Construction Using Value Stream Mapping. Journal of Construction Engineering and Management, 135(08), 782–90.

Zarghami, S A (2022) Prioritizing Construction Activities: Addressing the Flaws of Schedule-Based Indexes. Journal of Construction Engineering and Management, 148(08).

Zhai, D, Goodrum, P M, Haas, C T and Caldas, C H (2009) Relationship between Automation and Integration of Construction Information Systems and Labor Productivity. Journal of Construction Engineering and Management, 135(08), 746–53.

Zhan, W and Pan, W (2020) Formulating Systemic Construction Productivity Enhancement Strategies. Journal of Construction Engineering and Management, 146(08).

Zhang, J, Wang, T and Zhang, L (2021) Legal Risk Assessment Framework for International PPP Projects Based on Metanetwork. Journal of Construction Engineering and Management, 147(08).

Zhang, L and El-Gohary, N M (2017) Human-Centered Value Analysis: Building-Value Aggregation Based on Human Values and Building-System Integration. Journal of Construction Engineering and Management, 143(08).

Zhang, R P, Lingard, H and Oswald, D (2020) Impact of Supervisory Safety Communication on Safety Climate and Behavior in Construction Workgroups. Journal of Construction Engineering and Management, 146(08).

Zhang, Z, Li, M, Chen, J, Wang, J and Zeng, F (2017) Innovative Construction Method for Oversized Excavations with Bipartition Walls. Journal of Construction Engineering and Management, 143(08).

Zhao, D, Simmons, D and Chen, Z (2021) Interconnectivity in Collaboration Networks Impact on Member Belongingness. Journal of Construction Engineering and Management, 147(08).

Zhao, X, Chen, L, Pan, W and Lu, Q (2017) AHP-ANP–Fuzzy Integral Integrated Network for Evaluating Performance of Innovative Business Models for Sustainable Building. Journal of Construction Engineering and Management, 143(08).

Zhao, X, Hwang, B and Low, S P (2014) Investigating Enterprise Risk Management Maturity in Construction Firms. Journal of Construction Engineering and Management, 140(08).

Zheng, J, Wen, Q and Qiang, M (2020) Understanding Demand for Project Manager Competences in the Construction Industry: Data Mining Approach. Journal of Construction Engineering and Management, 146(08).

Zheng, S and Tiong, R L K (2010) First Public-Private-Partnership Application in Taiwan’s Wastewater Treatment Sector: Case Study of the Nanzih BOT Wastewater Treatment Project. Journal of Construction Engineering and Management, 136(08), 913–22.

Zhu, L, Cheung, S O, Gao, X, Li, Q and Liu, G (2020) Success DNA of a Record-Breaking Megaproject. Journal of Construction Engineering and Management, 146(08).

Zolfagharian, S and Irizarry, J (2017) Constructability Assessment Model for Commercial Building Designs in the United States. Journal of Construction Engineering and Management, 143(08).

Zou, P X W, Chen, Y and Chan, T (2010) Understanding and Improving Your Risk Management Capability: Assessment Model for Construction Organizations. Journal of Construction Engineering and Management, 136(08), 854–63.

Zuluaga, C M, Albert, A and Arroyo, P (2018) Protecting Bridge Maintenance Workers from Falls: Evaluation and Selection of Compatible Fall Protection Supplementary Devices. Journal of Construction Engineering and Management, 144(08).