ARCOM

Search or browse again.

Click on the titles below to expand the information about each abstract.
Viewing 2590 results ...

Afolabi, A, O, Tunji-Olayeni, P, F, Oyeyipo, O, O and Ojelabi, R, A (2017) The Socio-Economics of Women Inclusion in Green Construction . Construction Economics and Building, 17(01), 70-89.

Hosseini, M, R, Chileshe, N, Jepson, J and M,Arashpour (2016) Critical success factors for implementing risk management systems in developing countries . Construction Economics and Building, 16(01), 18-32.

Livesey P, V (2017) Goleman-Boyatzis Model of Emotional Intelligence for Dealing with Problems in Project Management . Construction Economics and Building, 17(01), 20-45.

Panahi, B, Preece, C, N, Wan, N, and Zakaria, W, N, W. (2016) Personal-organisational value conflicts and job satisfaction of internal construction stakeholders . Construction Economics and Building, 16(01), 1-17.

Çıdık, M S and Boyd, D (2020) “Shared sense of purposefulness”: a new concept to understand the practice of coordinating design in construction. Construction Management and Economics, 38(01), 18–31.

Ökmen, & and Öztaş, A (2008) Construction Project Network Evaluation with Correlated Schedule Risk Analysis Model. Journal of Construction Engineering and Management, 134(01), 49–63.

Aagaard, L K (2021) The meaning of convenience in smart home imaginaries: tech industry insights. Buildings and Cities, 2(01), 568–82.

Aagaard, L K and Madsen, L V (2022) Technological fascination and reluctance: gendered practices in the smart home. Buildings and Cities, 3(01), 677–91.

Aaron, M A, Mohan, M K and Gangadhar, M (2011) Building relationally integrated value networks (RIVANS). Engineering, Construction and Architectural Management, 18(01), 102–20.

Ababio, B K and Lu, W (2023) Barriers and enablers of circular economy in construction: a multi-system perspective towards the development of a practical framework. Construction Management and Economics, 41(01), 3–21.

Abdelhamid, T S and Everett, J G (2000) Identifying Root Causes of Construction Accidents. Journal of Construction Engineering and Management, 126(01), 52–60.

Abdelhamid, T S and Everett, J G (1999) Physiological Demands of Concrete Slab Placing and Finishing Work. Journal of Construction Engineering and Management, 125(01), 47–52.

Abdelshafy, A and Walther, G (2023) Using dynamic-locational material flow analysis to model the development of urban stock. Building Research & Information, 51(01), 5–20.

Abdirad, H (2017) Metric-based BIM implementation assessment: a review of research and practice. Architectural Engineering and Design Management, 13(01), 52–78.

Abdirad, H and Dossick, C S (2019) Restructuration of architectural practice in integrated project delivery (IPD): two case studies. Engineering, Construction and Architectural Management, 26(01), 104–17.

Abduh, M and Skibniewski, M J (2004) Electronic networking technologies in construction. Journal of Construction Research, 5(01), 17–42.

Abdul Nabi, M and El-adaway, I H (2022) Understanding Disputes in Modular Construction Projects: Key Common Causes and Their Associations. Journal of Construction Engineering and Management, 148(01).

Abdul-Aziz, A R (2009) Locational factors and foreign market-entry considerations for Malaysian contractors. Construction Economics and Building, 9(01), 27-36.

Abdul-Aziz, A-R (1998) Adapting procurement practices to suit a host country as a probable localization tactic. Journal of Construction Procurement, 4(01), 45–58.

Abdul-Aziz, A-R (2001) Clandestine foreign site operatives in Japan: a focus on Malaysians. Journal of Construction Procurement, 7(01), 51–72.

Abdul-Aziz, A-R (2003) Construction Entrepreneurship in Terengganu, Malaysia: An Exploration of the Influential Forces. Journal of Engineering, Design and Technology, 1(01), 15–41.

Abdul-Aziz, A-R (2012) Control mechanisms exercised in Malaysian housing public-private partnerships. Construction Management and Economics, 30(01), 37–55.

Abdul-Aziz, A-R and Awil, A-U (2010) Locational considerations and international Malaysian housing developers. Journal of Financial Management of Property and Construction, 15(01), 7–20.

Abdul-Aziz, A-R and Tan, A C N (1998) GATT, GATS and the global construction industry. Engineering, Construction and Architectural Management, 5(01), 31–7.

Abdul-Aziz, A-R and Wong, S S (2010) Exploring the internationalization of Malaysian contractors: the international entrepreneurship dimension. Construction Management and Economics, 28(01), 61.

Abdul-Aziz, A-R, Ngau, D P, Lim, Y M and Nuruddin, A R (2011) Internationalization of Malaysian quantity surveying firms: exploring the best fit models. Construction Management and Economics, 29(01), 49–58.

Abdul-Rahman, H (1995) The cost of non-conformance during a highway project: a case study. Construction Management and Economics, 13(01), 23-32.

Abdul-Rahman, H, Yahya, I A, Berawi, M A and Wah, L W (2008) Conceptual delay mitigation model using a project learning approach in practice. Construction Management and Economics, 26(01), 15–27.

Abdullahi, B, Ibrahim, Y M, Ibrahim, A and Bala, K (2019) Development of e-tendering evaluation system for Nigerian public sector. Journal of Engineering, Design and Technology , 18(01), 122–49.

Abidin, N Z, Yusof, N A and Othman, A A E (2013) Enablers and challenges of a sustainable housing industry in Malaysia. Construction Innovation, 13(01), 10-25.

Abotaleb, I S and El-adaway, I H (2017) Construction Bidding Markup Estimation Using a Multistage Decision Theory Approach. Journal of Construction Engineering and Management, 143(01).

AbouRizk, S M and Wales, R J (1997) Combined Discrete-Event/Continuous Simulation for Project Planning. Journal of Construction Engineering and Management, 123(01), 11–20.

Abowitz, D A and Toole, T M (2010) Mixed Method Research: Fundamental Issues of Design, Validity, and Reliability in Construction Research. Journal of Construction Engineering and Management, 136(01), 108–16.

Abrahams, G (2017) Constructing definitions of sustainable development. Smart and Sustainable Built Environment, 6(01), 34-47.

Abrishami, S, Goulding, J, Pour, R F and Ganah, A (2015) Virtual generative BIM workspace for maximising AEC conceptual design innovation: A paradigm of future opportunities. Construction Innovation, 15(01), 24-41.

Abu Samra, S, Ahmed, M, Hammad, A and Zayed, T (2018) Multiobjective Framework for Managing Municipal Integrated Infrastructure. Journal of Construction Engineering and Management, 144(01).

Abu‐Hijleh, S F and Ibbs, C W (1993) Systematic Automated Management Exception Reporting. Journal of Construction Engineering and Management, 119(01), 87–104.

Abudayyeh, O (2003) Undergraduate Research Mentoring Model in Construction Engineering and Management. Journal of Construction Engineering and Management, 129(01), 65–69.

Abunyewah, M, Gajendran, T, Maund, K and Okyere, S A (2019) Linking information provision to behavioural intentions. International Journal of Disaster Resilience in the Built Environment, 11(01), 100–18.

Abuzeinab, A, Arif, M, Qadri, M A and Kulonda, D (2018) Green business models in the construction sector: An analysis of outcomes and benefits. Construction Innovation, 18(01), 20-42.

Acharya, N K, Lee, Y-D and Im, H-M (2006) Design errors: tragic for the clients. Journal of Construction Research, 7(01), 177–90.

Acheamfour, V K, Kissi, E, Adjei-Kumi, T and Adinyira, E (2019) Review of empirical arguments on contractor pre-qualification criteria. Journal of Engineering, Design and Technology , 18(01), 70–83.

Adabre, M A, Chan, A P C, Darko, A and Hosseini, M R (2023) Facilitating a transition to a circular economy in construction projects: intermediate theoretical models based on the theory of planned behaviour. Building Research & Information, 51(01), 85–104.

Adams, D and Hastings, E M (2000) Making urban renewal pay: the Hong Kong experience. Journal of Financial Management of Property and Construction, 5(01), 79–84.

Adams, F K (2006) Expert elicitation and Bayesian analysis of construction contract risks: an investigation. Construction Management and Economics, 24(01), 81-96.

Adams, O (1997) Contractor development in Nigeria: perceptions of contractors and professionals. Construction Management and Economics, 15(01), 95-108.

Adamtey, S A (2021) A Case Study Performance Analysis of Design-Build and Integrated Project Delivery Methods. International Journal of Construction Education and Research, 17(01), 68–84.

Adamtey, S A (2022) An Empirical Study to Assist Owners in Selecting the Right Procurement Method for Design-Build Projects. International Journal of Construction Education and Research, 18(01), 67–84.

Ade, R and Rehm, M (2020) The unwritten history of green building rating tools: a personal view from some of the ‘founding fathers’. Building Research & Information, 48(01), 1–17.

Adel, J F v d, Al-Jibouri, S H, Karim, U F A and Mawdesley, M (2003) Integrated Foundation Design of Buildings: Case Demonstration of a Prototype Expert System. Journal of Engineering, Design and Technology, 1(01), 55–74.

Adeli, H and Wu, M (1998) Regularization Neural Network for Construction Cost Estimation. Journal of Construction Engineering and Management, 124(01), 18–24.

Aderinlewo, O and Alade, G A (2014) Reliability-based analysis and design of steel frames with different supports. Journal of Engineering, Design and Technology, 12(01), 39-52.

Adewumi, A S, Onyango, V, Moyo, D and AlWaer, H (2019) A review of selected neighbourhood sustainability assessment frameworks using the Bellagio STAMP. International Journal of Building Pathology and Adaptation, 37(01), 108–18.

Adjidjonu, D and Burgett, J (2021) Assessing the Accuracy of Unmanned Aerial Vehicles Photogrammetric Survey. International Journal of Construction Education and Research, 17(01), 85–96.

Adshead, J (2014) Revisiting the ideologies of planning law: Private property, public interest and public participation in the legal framework of England and Wales. International Journal of Law in the Built Environment, 6(01), 174-93.

Adu, E T and Opawole, A (2019) Assessment of performance of teamwork in construction projects delivery in South-Southern Nigeria. Journal of Engineering, Design and Technology , 18(01), 230–50.

Aduwo, E B, Ibem, E O, Afolabi, A O, Oluwnmi, A O, Tunji-Olayeni, P F, Ayo-Vaughan, E A, Uwakonye, U O and Oni, A A (2020) Exploring anti-corruption capabilities of e-procurement in construction project delivery in Nigeria. Construction Economics and Building, 20(01), 56-76.

Afolabi, A, O, Oluwatayo, A, Oyeyipo, O, Ojelabi, R and Fagbenle, O (2018) Assessment of Designers’ Perception of Post Conflict Housing Schemes for Internally Displaced Persons. Construction Economics and Building, 18(01), 27-47.

Afroz, R (2020) Developing a low-carbon architecture pedagogy in Bangladesh. Buildings and Cities, 1(01), 637–49.

Agee, P, Gao, X, Paige, F, McCoy, A and Kleiner, B (2021) A human-centred approach to smart housing. Building Research & Information, 49(01), 84–99.

Aggeli, A, Christensen, T H and Larsen, S P A K (2022) The gendering of energy household labour. Buildings and Cities, 3(01), 709–24.

Agren, R and Wing, R D (2014) Five moments in the history of industrialized building. Construction Management and Economics, 32(01), 7-15.

Agyekum, K, Blay, K and Opoku, A (2019) Mechanisms for preventing rising damp in new building infrastructure. International Journal of Building Pathology and Adaptation, 37(01), 87–107.

Ahadzie, D K, Proverbs, D G, Olomolaiye, P O and Ankrah, N (2009) Towards developing competency-based measures for project managers in mass house building projects in developing countries. Construction Management and Economics, 27(01), 89–102.

Ahankoob, A, Manley, K, Hon, C and Drogemuller, R (2023) The influence of building information modelling on the absorptive capacity of project-based organisations. Architectural Engineering and Design Management, 19(01), 1–21.

Ahmad Shazali, A S and Tahar, K N (2019) Virtual 3D model of Canseleri building via close-range photogrammetry implementation. International Journal of Building Pathology and Adaptation, 38(01), 217–27.

Ahmad, H S, Ayoush, M D and Al-Alwan, M S (2019) Causes of delay to public infrastructure projects according to engineers representing different contract parties. Built Environment Project and Asset Management, 10(01), 153–79.

Ahmad, R K and Gibb, A G F (2003) Measuring safety culture with SPMT: field-data. Journal of Construction Research, 4(01), 29–44.

Ahmad, T, Thaheem, M J and Anwar, A (2016) Developing a green-building design approach by selective use of systems and techniques. Architectural Engineering and Design Management, 12(01), 29–50.

Ahmadian, F F A, Akbarnezhad, A, Rashidi, T H and Waller, S T (2016) Accounting for Transport Times in Planning Off-Site Shipment of Construction Materials. Journal of Construction Engineering and Management, 142(01).

Ahmadu, H A, Ibrahim, Y M, Ibrahim, A D and Abdullahi, M (2015) Modelling building construction durations. Journal of Financial Management of Property and Construction, 20(01), 65-84.

Ahmed, H I (2023) Mechanical Behavior, Microstructure, and Chloride-Penetration Resistance of Glass Waste Nanopowder Magnetic Concrete. Journal of Construction Engineering and Management, 149(01).

Ahmed, I and McEvoy, D (2014) Post-tsunami resettlement in Sri Lanka and India: site planning, infrastructure and services. International Journal of Disaster Resilience in the Built Environment, 5(01), 53-65.

Ahmed, S H and Suliman, S M (2020) A structure equation model of indicators driving BIM adoption in the Bahraini construction industry. Construction Innovation , 20(01), 61–78.

Ahmed, V, Shaik, A and Aouad, G (2006) An ontology of construction education for e-learning via the semantic web. Architectural Engineering and Design Management, 2(01), 87–99.

Ahn, S and Lee, S (2015) Methodology for Creating Empirically Supported Agent-Based Simulation with Survey Data for Studying Group Behavior of Construction Workers. Journal of Construction Engineering and Management, 141(01).

Ahn, Y-H, Holley, P and Kang, J S (2009) Risk management of exchange rates in international construction. International Journal of Construction Education and Research, 5(01), 24-44.

Ahuja, V and Thiruvengadam, V (2004) Project scheduling and monitoring: current research status. Construction Innovation, 4(01), 19–31.

Aibinu, A A (2006) The relationship between distribution of control, fairness and potential for dispute in the claims handling process. Construction Management and Economics, 24(01), 45-54.

Aibinu, A A, Carter, S, Francis, V and Vaz-Serra, P (2019) Request for information frequency and their turnaround time in construction projects. Built Environment Project and Asset Management, 10(01), 1–15.

Aikivuori, A (1996) Periods and demand for private sector housing refurbishment. Construction Management and Economics, 14(01), 3-12.

Airaksinen, J, Joutsiniemi, A and Vaattovaara, M (2021) Empowered by planning law: unintended outcomes in the Helsinki region. Buildings and Cities, 2(01), 837–55.

Aje, O I, Olatunji, O A and Olalusi, O A (2017) Overrun causations under advance payment regimes. Built Environment Project and Asset Management, 7(01), 86-98.

Ajibike, W A, Adeleke, A Q, Muuka, G N, Bamgbade, J A, Darun, M R and Moshood, T D (2022) Impact of oil and gas internal risk factors on project success: Moderating role of government support. Construction Economics and Building, 22(01), 47-69.

Akama, Y, Cooper, V and Mees, B (2016) Beyond transmission: An analysis of communication frameworks in Australian bushfire preparedness. International Journal of Disaster Resilience in the Built Environment, 7(01), 49-62.

Akan, G T, Arditi, D and Imre, M (1984) Priority ranking of highway improvement projects. Construction Management and Economics, 2(01), 49-55.

Akintoye, A (2000) Analysis of factors influencing project cost estimating practice. Construction Management and Economics, 18(01), 77-89.

Akintoye, A and Fitzgerald, E (1995) Design and build: a survey of architects' views. Engineering, Construction and Architectural Management, 2(01), 27–44.

Akintoye, A and Skitmore, M R (1994) Models of UK private sector quarterly construction demand. Construction Management and Economics, 12(01), 3-14.

Akintoye, A and Sommerville, J (1995) Distributed lag relationships between UK construction orders and output. Construction Management and Economics, 13(01), 33-42.

Akintoye, A, Beck, M, Hardcastle, C, Chinyio, E A and Asenova, D (2003) Outsourcing the Risk Analysis Function in 'Private Finance Initiative' Projects. Journal of Construction Procurement, 9(01).

Akintoye, A, Taylor, C and Fitzgerald, E (1998) Risk analysis and management of Private Finance Initiative projects. Engineering, Construction and Architectural Management, 5(01), 9–21.

Al Hattab, M, Zankoul, E, Barakat, M and Hamzeh, F (2018) Crane overlap and operational flexibility: Balancing utilization, duration, and safety. Construction Innovation, 18(01), 43-63.

Al-Jibouri, S and Mawdesley, M J (2001) Development and application of a stochastic based cost prediction model for construction. Journal of Financial Management of Property and Construction, 6(01), 61–9.

Al-Kaisy, A and Nassar, K (2005) Nighttime construction issues revisited. Journal of Construction Research, 6(01), 139–56.

Al-Kharashi, A and Skitmore, M (2009) Causes of delays in Saudi Arabian public sector construction projects. Construction Management and Economics, 27(01), 3–23.

Al-Kheetan, M J, Rahman, M M and Chamberlain, D A (2018) Remediation and protection of masonry structures with crystallising moisture blocking treatment. International Journal of Building Pathology and Adaptation, 36(01), 77–92.

Al-Meshekeh, H S and Langford, D A (1999) Conflict management and construction project effectiveness: a review of the literature and development of a theoretical framework. Journal of Construction Procurement, 5(01), 58–75.

Al-Shawi, M and Hope, A E (1989) Expert systems and contractual disputes: extension of time under JCT 80. Construction Management and Economics, 7(01), 65-74.

Al-Sudairi, A A (2007) Evaluating the effect of construction process characteristics to the applicability of lean principles. Construction Innovation, 7(01), 99–121.

Al-Tabtabai, H and Diekmann, J E (1992) Judgemental forecasting in construction projects. Construction Management and Economics, 10(01), 19-30.

Alabi, A G F, Ajiboye, T K and Olusegun, H D (2010) Investigating the cutting forces in heat treated medium carbon steel when turning on a lathe machine. Journal of Engineering, Design and Technology, 8(01), 80–93.

Alameri, R and Esmaeili, B (2023) Progressive Design-build Delivery Method: Assessment of Project Performance. International Journal of Construction Education and Research, 19(01), 22–41.

Alao, O O and Jagboro, G O (2017) Assessment of causative factors for project abandonment in Nigerian public tertiary educational institutions. International Journal of Building Pathology and Adaptation, 35(01), 41–62.

Alarcón, L F and Bastias, A (2000) A computer environment to support the strategic decision-making process in construction firms. Engineering, Construction and Architectural Management, 7(01), 63–75.

Alavipour, S R and Arditi, D (2019) Maximizing expected contractor profit using an integrated model. Engineering, Construction and Architectural Management, 26(01), 118–38.

Alazzaz, F and Whyte, A (2015) Linking employee empowerment with productivity in off-site construction. Engineering, Construction and Architectural Management, 22(01), 21-37.

Aldossari, K M, Lines, B C, Smithwick, J B, Hurtado, K C and Sullivan, K T (2023) Employee Reactions to Adoption of Alternative Project Delivery Methods within the AEC Industry. International Journal of Construction Education and Research, 19(01), 4–21.

Ali Khan, M S, Suresh, A and Ramaiah, N S (2016) Numerical study of magnetic circuit response in magneto-rheological damper. Journal of Engineering, Design and Technology, 14(01), 196-210.

Ali, A S, Azmi, N F and Baaki, T K (2018) Cost performance of building refurbishment works: the case of Malaysia. International Journal of Building Pathology and Adaptation, 36(01), 41–62.

Ali, F M M and Jones, K (2013) Negotiating community resilience in the city in a time of political change and deficit reduction. International Journal of Disaster Resilience in the Built Environment, 4(01), 9-22.

Aljassmi, H, Han, S and Davis, S (2014) Project Pathogens Network: New Approach to Analyzing Construction-Defects-Generation Mechanisms. Journal of Construction Engineering and Management, 140(01).

Alkalbani, S, Rezgui, Y, Vorakulpipat, C and Wilson, I E (2013) ICT adoption and diffusion in the construction industry of a developing economy: The case of the sultanate of Oman. Architectural Engineering and Design Management, 9(01), 62-75.

Allan, S, Jones, K and Walker, S (2006) Retrofitting e-learning to an existing distance learning course. Architectural Engineering and Design Management, 2(01), 137–47.

Allen, C and Smallwood, J (2008) Improving construction planning through 4D planning. Journal of Engineering, Design and Technology, 6(01), 7–20.

Allouche, E N, Ariaratnam, S T and Lueke, J S (2000) Horizontal Directional Drilling: Profile of an Emerging Industry. Journal of Construction Engineering and Management, 126(01), 68–76.

Alqahtani, A and Whyte, A (2016) Estimation of life-cycle costs of buildings: Regression vs artificial neural network. Built Environment Project and Asset Management, 6(01), 30-43.

AlSehaimi, A O, Fazenda, P T and Koskela, L (2014) Improving construction management practice with the Last Planner System: a case study. Engineering, Construction and Architectural Management, 21(01), 51-64.

Alsharqawi, M, Zayed, T and Shami, A (2020) Ground penetrating radar-based deterioration assessment of RC bridge decks. Construction Innovation , 20(01), 1–17.

Alshawi, M and Faraj, I (2002) Integrated construction environments: technology and implementation. Construction Innovation, 2(01), 33–51.

Alvanchi, A and JavadiAghdam, S (2019) Job site weather index: an indicator for open environment construction projects. Construction Innovation , 19(01), 110–24.

Alvanchi, A, Lee, S and AbouRizk, S (2012) Dynamics of Working Hours in Construction. Journal of Construction Engineering and Management, 138(01), 66–77.

Alves Tenório de Morais, G and Casado Lordsleem Júnior, A (2019) Building maintenance management activities in a public institution. Engineering, Construction and Architectural Management, 26(01), 85–103.

Amadi, A and Higham, A P (2019) A cost trajectory to environmentally adaptive building construction in wet humid settings. International Journal of Building Pathology and Adaptation, 38(01), 68–88.

Amadi, A I and Higham, A (2018) The trickle-down effect of psycho-social constructs and knowledge deficiencies as organizational barriers to cost performance on highway projects. Journal of Financial Management of Property and Construction, 23(01), 57–72.

Amaratunga, C A (2014) Building community disaster resilience through a virtual community of practice (VCOP). International Journal of Disaster Resilience in the Built Environment, 5(01), 66-78.

Amies, P, Jin, X and Senaratne, S (2023) Systematic Literature Review on Success Criteria for Dam Engineering Projects. Journal of Construction Engineering and Management, 149(01).

Ammar, M A (2013) LOB and CPM Integrated Method for Scheduling Repetitive Projects. Journal of Construction Engineering and Management, 139(01), 44–50.

Ammar, M A (2011) Optimization of Project Time-Cost Trade-Off Problem with Discounted Cash Flows. Journal of Construction Engineering and Management, 137(01), 65–71.

Ancapi, F B (0) Ex ante analysis of circular built environment policy coherence. Buildings and Cities, 4(01), 575–93.

Andersen, C E, Kanafani, K, Zimmermann, R K, Rasmussen, F N and Birgisdóttir, H (2020) Comparison of GHG emissions from circular and conventional building components. Buildings and Cities, 1(01), 379–92.

Andersen, L P, Nørdam, L, Joensson, T, Kines, P and Nielsen, K J (2018) Social identity, safety climate and self-reported accidents among construction workers. Construction Management and Economics, 36(01), 22-31.

Andersen, T and Gaarslev, T (1996) Perspectives on artificial intelligence in the construction industry. Engineering, Construction and Architectural Management, 3(01), 3-14.

Anderson, B (0) A residential emissions-based carbon levy: city and neighbourhood consequences. Buildings and Cities, 4(01), 545–64.

Anderson, B and James, P (2021) Covid-19 lockdown: impacts on GB electricity demand and CO₂ emissions. Buildings and Cities, 2(01), 134–49.

Anderson, J and Moncaster, A (2020) Embodied carbon of concrete in buildings, Part 1: analysis of published EPD. Buildings and Cities, 1(01), 198–217.

Andi (2006) The importance and allocation of risks in Indonesian construction projects. Construction Management and Economics, 24(01), 69-80.

Andreasen, M H, Agergaard, J, Kofie, R Y, Møller-Jensen, L and Oteng-Ababio, M (2022) Urban encroachment in ecologically sensitive areas: drivers, impediments and consequences. Buildings and Cities, 3(01), 920–38.

Angel, S (0) Urban expansion: theory, evidence and practice. Buildings and Cities, 4(01), 124–38.

Angel, S, Lamson-Hall, P and Blanco, Z G (2021) Anatomy of density: measurable factors that constitute urban density. Buildings and Cities, 2(01), 264–82.

Aniekwu, A N and Okpala, D C (1988) Contractual arrangement and the performance of the Nigerian construction industry (the structural component). Construction Management and Economics, 6(01), 3-11.

Ankrah, N A, Proverbs, D and Debrah, Y (2009) Factors influencing the culture of a construction project organisation: an empirical investigation. Engineering, Construction and Architectural Management, 16(01), 26–47.

Ann Vallis, S, Karvonen, A and Eriksson, E (0) Pandemics and the built environment: A human–building interaction typology. Buildings and Cities, 4(01), 158–73.

Ansah, R H and Sorooshian, S (2018) 4P delays in project management. Engineering, Construction and Architectural Management, 25(01), 62-76.

Antoni, A, Yonathan, A, Suryo, H E, Felio, C, Ghozali, K E and Hardjito, D (2021) Exploring the Potential of Low Cement Concrete through a Student Concrete Competition. International Journal of Construction Education and Research, 17(01), 37–51.

Anumba, C J, Pan, J, Issa, R R A and Mutis, I (2008) Collaborative project information management in a semantic web environment. Engineering, Construction and Architectural Management, 15(01), 78–94.

Anvuur, A M and Kumaraswamy, M M (2016) Effects of Teamwork Climate on Cooperation in Crossfunctional Temporary Multi-Organization Workgroups. Journal of Construction Engineering and Management, 142(01).

Aouad, G, Lee, A and Wu, S (2005) nD modelling for collaborative working in construction. Architectural Engineering and Design Management, 1(01), 33-44.

Apollo, M and Burkacki, D (2024) Key success factors for small design offices in the bidding process. Architectural Engineering and Design Management, 20(01), 32–46.

Appleton, B J A, Niaz, M A, Abourizk, S M, Al-Hussein, M and Mohamed, Y (2006) Priority rating logic simulation model for tower crane operations management. Journal of Construction Research, 7(01), 133–47.

Aranda, G and Finch, E (2003) Using repertory grids to measure changes in risk-taking behaviour. Journal of Construction Research, 4(01), 101–14.

Arashpour, M, Wakefield, R, Blismas, N and Abbasi, B (2016) Quantitative Analysis of Rate-Driven and Due Date–Driven Construction: Production Efficiency, Supervision, and Controllability in Residential Projects. Journal of Construction Engineering and Management, 142(01).

Arditi, D (1985) Construction Productivity Improvement. Journal of Construction Engineering and Management, 111(01), 1–14.

Arditi, D (1983) Diffusion of Network Planning in Construction. Journal of Construction Engineering and Management, 109(01), 1–12.

Arditi, D and Gutierrez, A E (1991) Factors Affecting U.S. Contractors' Performance Overseas. Journal of Construction Engineering and Management, 117(01), 27–46.

Arditi, D and Koseoglu, H (1983) Factors affecting success in network applications in a developing country. Construction Management and Economics, 1(01), 3-16.

Arditi, D and Mochtar, K (1996) Productivity improvement in the Indonesian construction industry. Construction Management and Economics, 14(01), 13-24.

Arditi, D and Mochtar, K (2000) Trends in productivity improvement in the US construction industry. Construction Management and Economics, 18(01), 15-27.

Arditi, D and Patel, B K (1989) Impact Analysis of Owner‐Directed Acceleration. Journal of Construction Engineering and Management, 115(01), 144–57.

Arif, M, Al Zubi, M, Gupta, A D, Egbu, C, Walton, R O and Islam, R (2017) Knowledge sharing maturity model for Jordanian construction sector. Engineering, Construction and Architectural Management, 24(01), 170-88.

Arif, M, Egbu, C, Alom, O and Khalfan, M M A (2009) Measuring knowledge retention: a case study of a construction consultancy in the UAE. Engineering, Construction and Architectural Management, 16(01), 92–108.

Ariffin, M H and Jaafar, N (2007) Entry participation motivations in co-curricular activities: the case of construction management students at a Malaysian university. International Journal of Construction Education and Research, 3(01), 17–34.

Ariyachandra, M, Jayasena, H and Perera, B (2022) Competencies Expected from an Information Manager Working in BIM Based Projects. International Journal of Construction Education and Research, 18(01), 49–66.

Arroyo, P, Tommelein, I D and Ballard, G (2015) Comparing AHP and CBA as Decision Methods to Resolve the Choosing Problem in Detailed Design. Journal of Construction Engineering and Management, 141(01).

Arslan, M, Cruz, C, Roxin, A and Ginhac, D (2018) Spatio-temporal analysis of trajectories for safer construction sites. Smart and Sustainable Built Environment, 7(01), 80–100.

Arumsari, P and Rarasati, A D (2017) Maintenance strategy for public-rented residential building: A case study in Jakarta, Indonesia. Built Environment Project and Asset Management, 7(01), 99-110.

Aryal, A and Wilkinson, S (2019) The role of social capital in the recovery of cultural built heritage. International Journal of Disaster Resilience in the Built Environment, 11(01), 44–57.

Asad, M M, Hassan, R B, Sherwani, F, Abbas, Z, Shahbaz, M S and Soomro, Q M (2019) Identification of effective safety risk mitigating factors for well control drilling operation. Journal of Engineering, Design and Technology, 17(01), 218–29.

Asadi, M and Karami, J (2019) Modeling of the city evacuation plan in case of earthquake with particle swarm optimization (PSO) and imperialist competition algorithm (ICA). International Journal of Disaster Resilience in the Built Environment, 11(01), 134–51.

Asgari, S and Noorzai, E (2023) Improving the effectiveness and interaction between building information modeling and life cycle assessment. Architectural Engineering and Design Management, 19(01), 22–38.

Asghari, V and Hsu, S (2022) Upscaling Complex Project-Level Infrastructure Intervention Planning to Network Assets. Journal of Construction Engineering and Management, 148(01).

Ashdown, M M, Crawley, J, Biddulph, P, Wingfield, J, Lowe, R and Elwell, C A (2019) Characterising the airtightness of dwellings. International Journal of Building Pathology and Adaptation, 38(01), 89–106.

Ashuri, B, Lu, J and Kashani, H (2011) A real options framework to evaluate investments in toll road projects delivered under the two-phase development strategy. Built Environment Project and Asset Management, 1(01), 14-31.

Asiedu, R O, Frempong, N K and Alfen, H W (2017) Predicting likelihood of cost overrun in educational projects. Engineering, Construction and Architectural Management, 24(01), 21-39.

Asif, M, Hassanain, M A, Nahiduzzaman, K M and Sawalha, H (2019) Techno-economic assessment of application of solar PV in building sector. Smart and Sustainable Built Environment, 8(01), 34–52.

Asjad, M, Kulkarni, M S and Gandhi, O P (2016) Supportability issues of mechanical systems for their useful life. Journal of Engineering, Design and Technology, 14(01), 33-53.

Assad, M, Hosny, O, Elhakeem, A and El Haggar, S (2015) Green building design in Egypt from cost and energy perspectives. Architectural Engineering and Design Management, 11(01), 21-40.

Assaf, S A and Barhamain, S Y (1996) Factors affecting construction practices in Makkah Al-Mukkaramah, Saudi Arabia. Building Research & Information, 24(01), 27–30.

Assaf, S A, Al-Musallami, A I and Shash, A A (1996) Professional architectural/engineering consultancy practices in Saudi Arabia. Building Research & Information, 24(01), 59–62.

Athapaththu, K I and Karunasena, G (2018) Framework for sustainable construction practices in Sri Lanka. Built Environment Project and Asset Management, 8(01), 51–63.

Atkinson, A R (2002) The pathology of building defects; a human error. Engineering, Construction and Architectural Management, 9(01), 53–61.

Augenbroe, G, Castro, D and Ramkrishnan, K (2009) Decision model for energy performance improvements in existing buildings. Journal of Engineering, Design and Technology, 7(01), 21–36.

Austin, S A, Thorpe, A, Root, D, Thomson, D and Hammond, J (2007) Integrated collaborative design. Journal of Engineering, Design and Technology, 5(01), 7–22.

Awil, A and Aziz, A R A (2002) International markets: Malaysian construction contractors and the stage theory. Construction Economics and Building, 2(01), 94-106.

Awuzie, B O and McDermott, P (2015) A conceptual model for evaluating infrastructure-based temporary multi-organisations. Built Environment Project and Asset Management, 5(01), 103-20.

Axon, S and Morrissey, J (2020) Just energy transitions? Social inequities, vulnerabilities and unintended consequences. Buildings and Cities, 1(01), 393–411.

Ayinla, K, Cheung, F and Skitmore, M (2022) Process Waste Analysis for Offsite Production Methods for House Construction: A Case Study of Factory Wall Panel Production. Journal of Construction Engineering and Management, 148(01).

Ayodele, O L, Sanusi, K O and Kahn, M T (2019) Nuclear battery: a source of environmentally friendly energy. Journal of Engineering, Design and Technology, 17(01), 172–82.

Azadeh, A, Kalantari, M, Ahmadi, G and Eslami, H (2019) A flexible genetic algorithm-fuzzy regression approach for forecasting. Construction Innovation , 19(01), 71–88.

Azhar, S and Choudhry, R M (2016) Capacity building in construction health and safety research, education, and practice in Pakistan. Built Environment Project and Asset Management, 6(01), 92-105.

Azhar, S, Ahmad, I and Sein, M K (2010) Action Research as a Proactive Research Method for Construction Engineering and Management. Journal of Construction Engineering and Management, 136(01), 87–98.

Aziz, A R A, Yi, H S and Jaafar, M (2006) Competitive resources of private housing developers: the Malaysian perspective. Journal of Engineering, Design and Technology, 4(01), 71–80.

Aziz, Z, Anumba, C J and Peña-Mora, F (2010) Using context-aware wireless technologies to support teaching and learning in built environment. International Journal of Construction Education and Research, 6(01), 29.

Babatunde, S O and Perera, S (2017) Barriers to bond financing for public-private partnership infrastructure projects in emerging markets: A case of Nigeria. Journal of Financial Management of Property and Construction, 22(01), 2-19.

Babatunde, S O, Perera, S and Zhou, L (2016) Methodology for developing capability maturity levels for PPP stakeholder organisations using critical success factors. Construction Innovation, 16(01), 81-110.

Babatunde, S O, Perera, S, Ekundayo, D and Adeleye, T E (2019) An investigation into BIM-based detailed cost estimating and drivers to the adoption of BIM in quantity surveying practices. Journal of Financial Management of Property and Construction , 25(01), 61–81.

Babatunde, S O, Perera, S, Zhou, L and Udeaja, C (2016) Stakeholder perceptions on critical success factors for public-private partnership projects in Nigeria. Built Environment Project and Asset Management, 6(01), 74-91.

Baborska-Narożny, M, Stevenson, F and Grudzińska, M (2017) Overheating in retrofitted flats: Occupant practices, learning and interventions. Building Research & Information, 45(01), 40-59.

Baborska-Narozny, M, Szulgowska-Zgrzywa, M, Mokrzecka, M, Chmielewska, A, Fidorow-Kaprawy, N, Stefanowicz, E, Piechurski, K and Laska, M (2020) Climate justice: air quality and transitions from solid fuel heating. Buildings and Cities, 1(01), 120–40.

Bachman, L R (2008) Architecture and the four encounters with complexity. Architectural Engineering and Design Management, 4(01), 15–30.

Back, W E, Boles, W W and Fry, G T (2000) Defining Triangular Probability Distributions from Historical Cost Data. Journal of Construction Engineering and Management, 126(01), 29–37.

Bacon, M (2014) Occupancy analytics: a new basis for low-energy?low-carbon hospital design and operation in the UK. Architectural Engineering and Design Management, 10(01), 146-63.

Baden-Hellard, R (1996) The partnering philosophy: a procurement strategy for satisfaction through a teamwork solution to project quality. Journal of Construction Procurement, 2(01), 41–55.

Badenfelt, U (2008) The selection of sharing ratios in target cost contracts. Engineering, Construction and Architectural Management, 15(01), 54–65.

Badger, W W and Mulligan, D E (1995) An implementation model of an alliance. Journal of Construction Procurement, 1(01), 21–37.

Badger, W W and Mulligan, D E (1995) Rationale and Benefits Associated with International Alliances. Journal of Construction Engineering and Management, 121(01), 100–11.

Badger, W, Wiezel, A, Bopp, P H and Dunn, S (2010) Leadership transition and growth. International Journal of Construction Education and Research, 6(01), 69.

Badi, S, Ochieng, E, Nasaj, M and Papadaki, M (2021) Technological, organisational and environmental determinants of smart contracts adoption: UK construction sector viewpoint. Construction Management and Economics, 39(01), 36–54.

Bageis, A S and Fortune, C (2009) Factors affecting the bid/no bid decision in the Saudi Arabian construction contractors. Construction Management and Economics, 27(01), 53–71.

Bai, S, Li, M, Song, L and Kong, R (2021) Developing a Common Library of Prefabricated Structure Components through Graphic Media Mapping to Improve Design Efficiency. Journal of Construction Engineering and Management, 147(01).

Bakatjan, S, Arikan, M and Tiong, R L K (2003) Optimal Capital Structure Model for BOT Power Projects in Turkey. Journal of Construction Engineering and Management, 129(01), 89–97.

Bakens, W, Foliente, G and Jasuja, M (2005) Engaging stakeholders in performance-based building: lessons from the Performance-Based Building (PeBBu) Network. Building Research & Information, 33(01), 149–58.

Baker, D and Mahmood, M N (2012) Developing tools to support complex infrastructure decision-making. Smart and Sustainable Built Environment, 1(01), 59-72.

Baker, D and Mahmood, M N (2012) Developing tools to support complex infrastructure decision-making. Smart and Sustainable Built Environment, 1(01), 59-72.

Baker, H, Moncaster, A, Wilkinson, S J and Remøy, H (0) Demolition or retention of buildings: drivers at the masterplan scale. Buildings and Cities, 4(01), 488–506.

Bakhoum, E S and Brown, D C (2012) Developed Sustainable Scoring System for Structural Materials Evaluation. Journal of Construction Engineering and Management, 138(01), 110–9.

Baldwin, A N and McCaffer, R (2000) Identifying research requirements for collaborative design. Journal of Construction Procurement, 6(01), 56–66.

Ballard, G and Howell, G (1998) Shielding Production: Essential Step in Production Control. Journal of Construction Engineering and Management, 124(01), 11–17.

Ballard, G, Harper, N and Zabelle, T (2003) Learning to see work flow: an application of lean concepts to precast concrete fabrication. Engineering, Construction and Architectural Management, 10(01), 6–14.

Ballesteros-Pérez, P, Sanz-Ablanedo, E, Soetanto, R, González-Cruz, M C, Larsen, G D and Cerezo-Narváez, A (2020) Duration and Cost Variability of Construction Activities: An Empirical Study. Journal of Construction Engineering and Management, 146(01).

Balouktsi, M (2020) Carbon metrics for cities: production and consumption implications for policies. Buildings and Cities, 1(01), 233–59.

Bambrick, B (1994) Construction of an Island. Journal of Construction Engineering and Management, 120(01), 223–7.

Bangwal, D and Tiwari, P (2019) Environmental design and awareness impact on organization image. Engineering, Construction and Architectural Management, 26(01), 29–45.

Barkokebas, B, Al-Hussein, M and Hamzeh, F (2023) Assessment of Digital Twins to Reassign Multiskilled Workers in Offsite Construction Based on Lean Thinking. Journal of Construction Engineering and Management, 149(01).

Barlow, P L (2011) Development and delivery of an integrated project-based jobsite management undergraduate course. International Journal of Construction Education and Research, 7(01), 3–21.

Baron, T (1984) Housing in the inner cities. Construction Management and Economics, 2(01), 13-24.

Baron, T (1983) The challenge for the UK housing industry in the 1980s and the planning system. Construction Management and Economics, 1(01), 17-29.

Barraza, G A, Back, W E and Mata, F (2004) Probabilistic Forecasting of Project Performance Using Stochastic S Curves. Journal of Construction Engineering and Management, 130(01), 25–32.

Barrie, H, McDougall, K, Miller, K and Faulkner, D (0) The social value of public spaces in mixed-use high-rise buildings. Buildings and Cities, 4(01), 669–89.

Barrows, M, Clevenger, C M, Abdallah, M and Wu, W (2020) Value of Certifications when Seeking Construction Employment. International Journal of Construction Education and Research, 16(01), 61–79.

Bartiaux, F (2022) Gender roles and domestic power in energy-saving home improvements. Buildings and Cities, 3(01), 824–41.

Basha, I M, Gab-Allah, A A and Amer, M I (1995) Construction of Ameria Caisson in Egypt. Journal of Construction Engineering and Management, 121(01), 13–19.

Bashford, H H, Walsh, K D and Sawhney, A (2005) Production System Loading–Cycle Time Relationship in Residential Construction. Journal of Construction Engineering and Management, 131(01), 15–22.

Bassioni, H A, Hassan, T M and Price, A D F (2008) Evaluation and analysis of criteria and sub-criteria of a construction excellence model. Engineering, Construction and Architectural Management, 15(01), 21–41.

Batra, S (2020) Framework of socialisation, authentic leadership and affective commitment for construction professionals. Construction Economics and Building, 20(01), 77-95.

Bayat, M, Khanzadi, M, Nasirzadeh, F and Chavoshian, A (2020) Financial conflict resolution model in BOT contracts using bargaining game theory. Construction Innovation , 20(01), 18–42.

Bebelaar, N, Braggaar, R C, Kleijwegt, C M, Meulmeester, R W E, Michailidou, G, Salheb, N, van der Spek, S, Vaissier, N and Verbree, E (2018) Monitoring urban environmental phenomena through a wireless distributed sensor network. Smart and Sustainable Built Environment, 7(01), 68–79.

Beeston, D (1986) Combining risks in estimating. Construction Management and Economics, 4(01), 75-9.

Beim, A and Jensen, K V (2007) Forming core elements for strategic design management: how to define and direct architectural value in aniIndustrialized context. Architectural Engineering and Design Management, 3(01), 29–38.

Belayutham, S and Ibrahim, C, K, I, C (2019) Barriers and strategies for better safety practices: the case of construction SMEs in Malaysia. Construction Economics and Building, 19(01), 20-39.

Belias, E and Licina, D (2022) Outdoor PM_2.5 air filtration: optimising indoor air quality and energy. Buildings and Cities, 3(01), 186–203.

Beliveau, Y J, Dixit, S S, Dal, T and Morad, A A (1993) Multitask Motion Planning for Material Handling in Construction. Journal of Construction Engineering and Management, 119(01), 180–91.

Beliveau, Y J, Snyder, D A and Vorster, M C (1991) DBE Programs—New Model. Journal of Construction Engineering and Management, 117(01), 176–92.

Bell, L C and Stukhart, G (1986) Attributes of Materials Management Systems. Journal of Construction Engineering and Management, 112(01), 14–21.

Belniak, S, Lesniak, A, Plebankiewicz, E and Zima, K (2013) The influence of the building shape on the costs of its construction. Journal of Financial Management of Property and Construction, 18(01), 90-102.

Belusko, M and O'Leary, T (2010) Cost analyses of measures to improve residential energy ratings to 6 stars - Playford North Development, South Australia. Construction Economics and Building, 10(01), 36-47.

Bemelmans, J, Voordijk, H, Vos, B and Buter, J (2012) Assessing Buyer-Supplier Relationship Management: Multiple Case-Study in the Dutch Construction Industry. Journal of Construction Engineering and Management, 138(01), 163–76.

Ben Mahmoud, B, Lehoux, N and Blanchet, P (2024) Integration mechanisms for material suppliers in the construction supply chain: a systematic literature review. Construction Management and Economics, 42(01), 70–107.

Bendi, D, Rana, M Q, Arif, M, Goulding, J S and Kaushik, A K (2021) Understanding off-site readiness in Indian construction organisations. Construction Innovation, 21(01), 105–22.

Bendi, D, Rana, M Q, Arif, M, Goulding, J S and Sawhney, A (2021) An off-site construction readiness maturity model for the Indian construction sector. Construction Innovation, 21(01), 123–42.

Bendixen, M and Koch, C (2007) Negotiating visualizations in briefing and design. Building Research & Information, 35(01), 42–53.

• Type: Journal Article
• Keywords: Briefing; communication; design practices; drawings; practice-based theory; visual practices; visualization
• ISBN/ISSN: 0961-3218
• URL: http://journalsonline.tandf.co.uk/link.asp?id=x3j4l11h251k95nj
• Abstract:
  Building on an in-depth ethnographic study and the approaches of ‘practice-based studies’ and ‘science and technology studies', the role of visual representations is explored in briefing and design processes. Three characteristic ways in which drawings contribute to ongoing negotiations are discussed. First, drawings are shown to be inscribed with particular interests, making them political instruments. Second, they have prescriptive effects as partially independent actors in the project. Third, they are shown to participate as conscriptions in a complementary process of inscription and prescription, changing their roles and configurations, and intersecting and affecting the project process in characteristic ways. Visual representations play a temporary role, and ‘time’ and ‘phase’ set boundaries for them. For practice, the analysis suggests the implication that communitarian management approaches should be chosen to promote innovative briefing and design.

Benes, J and Diepeveen, W J (1985) Flexible planning in construction firms. Construction Management and Economics, 3(01), 25-31.

Benhart, B L and Shaurette, M (2014) Establishing New Graduate Competencies: Purdue University's Construction Management Curriculum Restructuring. International Journal of Construction Education and Research, 10(01), 19-38.

Benjaoran, V, Dawood, N and Hobbs, B (2005) Flowshop scheduling model for bespoke precast concrete production planning. Construction Management and Economics, 23(01), 93-105.

Bennett, J (1993) Japan's building industry: the new model. Construction Management and Economics, 11(01), 3-17.

Bentlin, F (2023) The urban expansion of Berlin, 1862–1900: Hobrecht’s Plan. Buildings and Cities, 4(01), 36–54.

Berkeley, D, Humphreys, P C and Thomas, R D (1991) Project risk action management. Construction Management and Economics, 9(01), 3-17.

Bernie, J and Howes, R (1983) Project management control using real-time budgeting and forecasting models. Construction Papers, 2(01), 19–40.

Bernold, L E and Lee, T S (2010) Experimental Research in Construction. Journal of Construction Engineering and Management, 136(01), 26–35.

Berrill, P and Hertwich, E G (2021) Correction: Material flows and GHG emissions from housing stock evolution in US counties, 2020–60. Buildings and Cities, 2(01), 797–9.

Berrill, P and Hertwich, E G (2021) Material flows and GHG emissions from housing stock evolution in US counties, 2020–60. Buildings and Cities, 2(01), 599–617.

Berryman, C W, Fischer, B, Wentz, T and Nobe, M D (2004) Distance education with Internet 2 audio/video technology. International Journal of Construction Education and Research, 1(01), 45–60.

Betts, M (1987) British public expenditure on construction less than claimed?. Construction Management and Economics, 5(01), 13-20.

Betts, M and Ofori, G (1993) Competitive advantage in construction: reply. Construction Management and Economics, 11(01), 73-4.

Bhattacharjee, S, Ghosh, S, Young-Corbett, D E and Fiori, C M (2013) Comparison of Industry Expectations and Student Perceptions of Knowledge and Skills Required for Construction Career Success. International Journal of Construction Education and Research, 9(01), 19-38.

Bhattacharya-Mis, N, Joseph, R, Proverbs, D and Lamond, J (2015) Grass-root preparedness against potential flood risk among residential and commercial property holders. International Journal of Disaster Resilience in the Built Environment, 6(01), 44-56.

Bibby, L, Austin, S and Bouchlaghem, D (2006) The impact of a design management training initiative on project performance. Engineering, Construction and Architectural Management, 13(01), 7–26.

Bichard, E (2009) The application of sustainable behaviour change strategies in three built environment companies. Journal of Engineering, Design and Technology, 7(01), 7–20.

Bigelow, B F, Bilbo, D, Ritter, L, Mathew, M and Elliott, J W (2016) An evaluation of factors for retaining female students in construction management programs. International Journal of Construction Education and Research, 12(01), 18-36.

Bigelow, B F, Perrenoud, A J, Rahman, M and Saseendran, A (2021) An Exploration of Age on Attraction and Retention of Managerial Workforce in the Electrical Construction Industry in the United States. International Journal of Construction Education and Research, 17(01), 3–17.

Bignami, D F (2017) Testing solutions of a multi-disaster building’s certification functional to the built environment sustainability and resilience. International Journal of Disaster Resilience in the Built Environment, 8(01), 77-97.

Bigolin, M, Bussular, C Z and Silva Filho, L C P (2020) Evolutionary resilience in the housing sector: requirements proposal. International Journal of Disaster Resilience in the Built Environment, 12(01), 1–12.

Bilbo, D, Bigelow, B, Escamilla, E and Lockwood, C (2015) Comparison of construction manager at risk and integrated project delivery performance on healthcare projects: A comparative case study. International Journal of Construction Education and Research, 11(01), 40-53.

Bildsten, L (2014) Buyer-supplier relationships in industrialized building. Construction Management and Economics, 32(01), 146-59.

Bildsten, L, Björnfot, A and Sandberg, E (2011) Value-driven purchasing of kitchen cabinets in industrialized housing. Journal of Financial Management of Property and Construction, 16(01), 73–83.

Bin Bandi, S, Abdullah, F and Amiruddin, R (2014) Review on the fundamental usage of Bills of Quantities (BQ) by contracting organisations. Construction Economics and Building, 14(01), 118-131.

Birchmore, R, Davies, K, Etherington, P, Tait, R and Pivac, A (2017) Overheating in Auckland homes: Testing and interventions in full-scale and simulated houses. Building Research & Information, 45(01), 157-75.

Birkeland, J L (2016) Net positive biophilic urbanism. Smart and Sustainable Built Environment, 5(01), 9-14.

Birnie, J (1996) Bias and financial management judgements. Journal of Financial Management of Property and Construction, 1(01), 37–54.

Birnie, J (1999) Private Finance Initiative (PFI): UK construction industry response. Journal of Construction Procurement, 5(01), 5–14.

Biswas, A (2019) Exploring Indian post-disaster temporary housing strategy through a comparative review. International Journal of Disaster Resilience in the Built Environment, 10(01), 14–35.

Blanc, F and Scanlon, K (2022) Sharing a home under lockdown in London. Buildings and Cities, 3(01), 118–33.

Blay, K, Agyekum, K and Opoku, A (2019) Actions, attitudes and beliefs of occupants in managing dampness in buildings. International Journal of Building Pathology and Adaptation, 37(01), 42–53.

Blismas, N and Wakefield, R (2009) Drivers, constraints and the future of offsite manufacture in Australia. Construction Innovation, 9(01), 72–83.

Blismas, N, Gibb, A and Pasquire, C (2005) Assessing project suitability for off-site production. Construction Economics and Building, 5(01), 9-15.

Blismas, N, Wakefield, R and Hauser, B (2010) Concrete prefabricated housing via advances in systems technologies: Development of a technology roadmap. Engineering, Construction and Architectural Management, 17(01), 110.

Blyth, K and Kaka, A (2006) A novel multiple linear regression model for forecasting S-curves. Engineering, Construction and Architectural Management, 13(01), 82–95.

Bo, X and Chan, A P C (2012) Investigation of Barriers to Entry into the Design-Build Market in the People’s Republic of China. Journal of Construction Engineering and Management, 138(01), 120–7.

Boadu, E F, Wang, C C and Sunindijo, R Y (2021) Challenges for occupational health and safety enforcement in the construction industry in Ghana. Construction Economics and Building, 21(01), 01-21.

Bogusz, B (2013) Regulating public/private interests in town and village greens. International Journal of Law in the Built Environment, 5(01), 21-39.

Bojic, M, Yik, F and Lee, M (2003) Influence of air-conditioning exhaust on exterior recessed space. Building Research & Information, 31(01), 25–34.

Boles, W W, Maxwell, D A, Scott, W D, Heermann, P D, Yarborough, T and Underwood, J (1995) Construction Automation and Robotics—Pathway to Implementation. Journal of Construction Engineering and Management, 121(01), 143–52.

Bollen, R (2000) Applying quantitative techniques to evaluate residential development profitability. Journal of Financial Management of Property and Construction, 5(01), 51–64.

Bonev, M, Wörösch, M and Hvam, L (2015) Utilizing platforms in industrialized construction: A case study of a precast manufacturer. Construction Innovation, 15(01), 84-106.

Bonham, M B (2013) Leading by example: new professionalism and the government client. Building Research & Information, 41(01), 77-94.

Bonnal, P, Gourc, D and Lacoste, G (2004) Where Do We Stand with Fuzzy Project Scheduling?. Journal of Construction Engineering and Management, 130(01), 114–23.

Bonyad, R, Hamzenejad, M and Khanmohammadi, M (2018) Ranking the regenerative architecture indicators for assessment of research-educational building projects in Tehran, Iran. Smart and Sustainable Built Environment, 9(01), 27–37.

Bordalo, R, de Brito, J, Gaspar, P L and Silva, A (2011) Service life prediction modelling of adhesive ceramic tiling systems. Building Research & Information, 39(01), 66–78.

Bordass, B (2020) Metrics for energy performance in operation: the fallacy of single indicators. Buildings and Cities, 1(01), 260–76.

Borg, L and Song, H (2015) Quality Change and Implications for Productivity Development: Housing Construction in Sweden 1990–2010. Journal of Construction Engineering and Management, 141(01).

Bornstein, L, Lizarralde, G, Gould, K A and Davidson, C (2013) Framing responses to post-earthquake Haiti: How representations of disasters, reconstruction and human settlements shape resilience. International Journal of Disaster Resilience in the Built Environment, 4(01), 43-57.

Bos-de Vos, M, Wamelink, J W F H and Volker, L (2016) Trade-offs in the value capture of architectural firms: The significance of professional value. Construction Management and Economics, 34(01), 21-34.

Boser, R A and El-Gafy, M (2011) Accelerating waste minimization in residential construction: a source separation case study. International Journal of Construction Education and Research, 7(01), 58–70.

Bossink, B A G and Brouwers, H J H (1996) Construction Waste: Quantification and Source Evaluation. Journal of Construction Engineering and Management, 122(01), 55–60.

Bostancioglu, E and Onder, N P (2019) Applying analytic hierarchy process to the evaluation of double skin façades. Architectural Engineering and Design Management, 15(01), 66–82.

Boudeau, C (2013) Design team meetings and the coordination of expertise: the roof garden of a hospital. Construction Management and Economics, 31(01), 78-89.

Bougrain, F (2012) Energy performance and public private partnership. Built Environment Project and Asset Management, 2(01), 41-55.

Bourgeois, D, Reinhart, C F and Ward, G (2008) Standard daylight coefficient model for dynamic daylighting simulations. Building Research & Information, 36(01), 68–82.

Boustras, G, Bratskas, R, Tokakis, V and Efstathiades, A (2011) Safety awareness of practitioners in the Cypriot manufacturing sector. Journal of Engineering, Design and Technology, 9(01), 19–31.

Bowen, P A and Edwards, P J (1998) Building cost planning and cost information management in South Africa. Journal of Construction Procurement, 4(01), 16–26.

Bowen, P, Govender, R, Edwards, P and Cattell, K (2016) An explanatory model of attitudinal fear of HIV/AIDS testing in the construction industry. Engineering, Construction and Architectural Management, 23(01), 92-112.

Bowlby, R L and Schriver, W R (1986) Observations on productivity and composition of building output in the United States, 1972-82. Construction Management and Economics, 4(01), 1-18.

Bowles, G and Morgan, J (2016) An evaluation of the performance of a large-scale collaborative procurement initiative in the social housing sector. Engineering, Construction and Architectural Management, 23(01), 60-74.

Boyd, D (2006) Developing a knowledge centric approach to construction education. Architectural Engineering and Design Management, 2(01), 149–59.

Boyd, P and Schweber, L (2018) Unintended consequences: institutional artefacts, closure mechanisms and the performance gap. Building Research & Information, 46(01), 10–22.

Bröchner, J and Grandinson, B (1992) R&D Cooperation by Swedish Contractors. Journal of Construction Engineering and Management, 118(01), 3–16.

Bröchner, J and Lagerqvist, O (2016) From ideas to construction innovations: firms and universities collaborating. Construction Economics and Building, 16(01), 76-89.

Brambilla, A, Candido, C, Sangiorgio, M F, Gocer, O and Gocer, K (2021) Can commercial buildings cope with Australian bushfires? An IAQ analysis. Buildings and Cities, 2(01), 583–98.

Brandon, P (2012) Sustainable development: ignorance is fatal - what don. Smart and Sustainable Built Environment, 1(01), 14-28.

Brandon, P (2012) Sustainable development: ignorance is fatal - what don't we know?. Smart and Sustainable Built Environment, 1(01), 14-28.

Brandon, P S and Ribeiro, F L (1998) A knowledge-based system for assessing applications for house renovation grants. Construction Management and Economics, 16(01), 57-69.

Brandon, P S and Ribeiro, F L (1997) The assessment of applications for the house renovation grant system (HRGS): a multistrategy knowledge-based framework. Engineering, Construction and Architectural Management, 4(01), 41–57.

Brawn, D (2012) Extensions of time and liquidated damages in construction contracts in England and Wales. International Journal of Law in the Built Environment, 4(01), 75-90.

Brege, S, Stehn, L and Nord, T (2014) Business models in industrialized building of multi-storey houses. Construction Management and Economics, 32(01), 208-26.

Bresnen, M (2017) Being careful what we wish for? Challenges and opportunities afforded through engagement with business and management research. Construction Management and Economics, 35(01), 24-34.

Bresnen, M J, Ford, J R, Bryman, A E and Keil, E T (1986) Labour recruitment strategies and selection practices on construction sites. Construction Management and Economics, 4(01), 37-55.

Brewer, G, Gajendran, T, Jefferies, M, McGeorge, D, Rowlinson, S and Dainty, A (2013) Value through innovation in long-term service delivery: Facility management in an Australian PPP. Built Environment Project and Asset Management, 3(01), 74-88.

Bright, S and Dixie, H (2014) Evidence of green leases in England and Wales. International Journal of Law in the Built Environment, 6(01), 6-20.

Brncich, A, Shane, J S, Strong, K C and Passe, U (2011) Using integrated student teams to advance education in sustainable design and construction. International Journal of Construction Education and Research, 7(01), 22–40.

Brocklehurst, F, Morgan, E, Greer, K, Wade, J and Killip, G (2021) Domestic retrofit supply chain initiatives and business innovations: an international review. Buildings and Cities, 2(01), 533–49.

Brooker, P (2009) Criteria for the appropriate use of mediation in construction disputes: Judicial statements in the English Technology and Construction Court. International Journal of Law in the Built Environment, 1(01), 82-97.

Brooker, P (2011) Towards a code of professional conduct for construction mediators. International Journal of Law in the Built Environment, 3(01), 24–47.

Brooks, T, Scott, L, Spillane, J P and Hayward, K (2020) Irish construction cross border trade and Brexit: Practitioner perceptions on the periphery of Europe. Construction Management and Economics, 38(01), 71–90.

Brown, A D and Phua, F T T (2011) Subjectively construed identities and discourse: towards a research agenda for construction management. Construction Management and Economics, 29(01), 83–95.

Brown, N, Wright, A J, Shukla, A and Stuart, G (2010) Longitudinal analysis of energy metering data from non-domestic buildings. Building Research & Information, 38(01), 91.

Bruce, R D, Woolsey, R C and McCandless, D W (2009) A study of craft worker length of employment at select Missouri construction companies. International Journal of Construction Education and Research, 5(01), 3-11.

Brunet, M, Motamedi, A, Guénette, L and Forgues, D (2019) Analysis of BIM use for asset management in three public organizations in Québec, Canada. Built Environment Project and Asset Management, 9(01), 153–67.

Brynskov, M, Heijnen, A, Balestrini, M and Raetzsch, C (2018) Experimentation at scale: challenges for making urban informatics work. Smart and Sustainable Built Environment, 7(01), 150–63.

Bubshait, A A, Tahir, B M and Jannadi, M O (1996) Use of microsilica in concrete construction. Building Research & Information, 24(01), 41–9.

Buchholz, M and Lützkendorf, T (0) European building passports: developments, challenges and future roles. Buildings and Cities, 4(01), 902–19.

Budde, B (2013) Challenges of coordination between climate and technology policies: A case study of strategies in Denmark and the UK. Construction Innovation, 13(01), 98-116.

Bullen, P and Love, P (2011) A new future for the past: a model for adaptive reuse decision-making. Built Environment Project and Asset Management, 1(01), 32-44.

Bullen, P and Love, P (2011) Factors influencing the adaptive re-use of buildings. Journal of Engineering, Design and Technology, 9(01), 32–46.

Burati, J L, Farrington, J J and Ledbetter, W B (1992) Causes of Quality Deviations in Design and Construction. Journal of Construction Engineering and Management, 118(01), 34–49.

Burati, J L, Matthews, M F and Kalidindi, S N (1992) Quality Management Organizations and Techniques. Journal of Construction Engineering and Management, 118(01), 112–28.

Burchett, J F, Tummala, V M R and Leung, H M (1999) A world-wide survey of current practices in the management of risk within electrical supply projects. Construction Management and Economics, 17(01), 77-90.

Burford, N K and Smith, F W (1999) Developing a new military shelter system: a case study in innovation. Building Research & Information, 27(01), 35–55.

Burgett, J M and Chini, A R (2013) Effective Energy Efficiency Measures for Existing Residential Homes in the Florida Market. International Journal of Construction Education and Research, 9(01), 61-80.

Burgoon, J M, Roebuck, A and Elliott, J W (2024) Evidence of Opportunity Gaps in Construction Education: A Longitudinal Analysis of Student Success. International Journal of Construction Education and Research, 20(01), 83–97.

Burnside-Lawry, J and Carvalho, L (2016) A stakeholder approach to building community resilience: awareness to implementation. International Journal of Disaster Resilience in the Built Environment, 7(01), 4-25.

Burroughs, S (2006) Strength of compacted earth: linking soil properties to stabilizers. Building Research & Information, 34(01), 55–65.

Burton, C A, Ryan, C, Rismanchi, B and Candy, S (2019) Urban shared energy systems and behaviour change - simulating a common pooled resource problem. Smart and Sustainable Built Environment, 9(01), 17–26.

Butcher, D C A and Sheehan, M J (2010) Excellent contractor performance in the UK construction industry. Engineering, Construction and Architectural Management, 17(01), 35–45.

Butler, L J and Bright, G (2010) Control strategy for a mobile self-balancing materials handling platform. Journal of Engineering, Design and Technology, 8(01), 6–27.

Bynum, P, Issa, R R A and Olbina, S (2013) Building Information Modeling in Support of Sustainable Design and Construction. Journal of Construction Engineering and Management, 139(01), 24–34.

Byrd, H, Matthewman, S and Rasheed, E (2022) Air-conditioning in New Zealand: power and policy. Buildings and Cities, 3(01), 1–9.

C. B., T and R. P., F (1986) Organizational Alternatives for Large Projects. Journal of Construction Engineering and Management, 112(01), 49–61.

C. William, I (1986) “Brand Name or Equal” Product Specifications. Journal of Construction Engineering and Management, 112(01), 1–13.

Caetano, L F, de Souza, H A and Gomes, A P (2022) Effect of the exposed steel structure on the thermal performance of buildings. Architectural Engineering and Design Management, 18(01), 38–55.

Caldas, C H, Kim, J, Haas, C T, Goodrum, P M and Zhang, D (2015) Method to Assess the Level of Implementation of Productivity Practices on Industrial Projects. Journal of Construction Engineering and Management, 141(01).

Cardoso, A F S P and Torkkeli, M (2014) Innovation in footwear companies – does it pay off?. Journal of Engineering, Design and Technology, 12(01), 128-54.

Carino, N J, Lew, H S and Stone, W C (1984) Investigation of East Chicago Ramp Collapse. Journal of Construction Engineering and Management, 110(01), 1–18.

Carmichael, R, Edwards, D J and Holt, G D (2007) Plant managers' perceptions of plant security systems. Engineering, Construction and Architectural Management, 14(01), 65–78.

Carr, R I (1987) Competitive Bidding and Opportunity Costs. Journal of Construction Engineering and Management, 113(01), 151–65.

Carr, R I (1983) Impact of Number of Bidders on Competition. Journal of Construction Engineering and Management, 109(01), 61–73.

Carr, R I (1987) Optimum Markup by Direct Solution. Journal of Construction Engineering and Management, 113(01), 138–50.

Carreira, P, Castelo, T, Gomes, C C, Ferreira, A, Ribeiro, C and Costa, A A (2018) Virtual reality as integration environments for facilities management: Application and users' perceptions. Engineering, Construction and Architectural Management, 25(01), 90-112.

Carrillo, P M (1996) Technology transfer on joint venture projects in developing countries. Construction Management and Economics, 14(01), 45-54.

Carrillo, P M (1994) Technology transfer: a survey of international construction companies. Construction Management and Economics, 12(01), 45-51.

Carswell, A T and Smith, S (2009) The greening of the multifamily residential sector. Journal of Engineering, Design and Technology, 7(01), 65–80.

Casanovas, M d M, Armengou, J and Ramos, G (2014) Occupational Risk Index for Assessment of Risk in Construction Work by Activity. Journal of Construction Engineering and Management, 140(01).

Castán Broto, V, Westman, L and Huang, P (0) How hegemonic discourses of sustainability influence urban climate action. Buildings and Cities, 4(01), 973–89.

Castell, L (2008) Adapting building design to access by individuals with intellectual disability. Construction Economics and Building, 8(01), 11-22.

Castillo, G, Alarcón, L F and González, V A (2015) Implementing Lean Production in Copper Mining Development Projects: Case Study. Journal of Construction Engineering and Management, 141(01).

Cattell, D W (2012) An overview of component unit pricing theory. Construction Management and Economics, 30(01), 81–92.

Cerrada Morato, L (0) Suburban climate adaptation governance: assumptions and imaginaries affecting peripheral municipalities. Buildings and Cities, 5(01), 64–82.

Chahrour, R, Hafeez, M A, Ahmad, A M, Sulieman, H I, Dawood, H, Rodriguez-Trejo, S, Kassem, M, Naji, K K and Dawood, N (2021) Cost-benefit analysis of BIM-enabled design clash detection and resolution. Construction Management and Economics, 39(01), 55–72.

Chambers, D (2022) Attuning smart home scripts to household and energy care. Buildings and Cities, 3(01), 663–76.

Chan, A P C, Chiang, Y H, Mak, S W K, Choy, L H T and M.W.Wong, J (2006) Forecasting the demand for construction skills in Hong Kong. Construction Innovation, 6(01), 3–19.

Chan, A P C, Ho, D K C and Tam, C M (2001) Design and build: views from some major public clients in Hong Kong. Construction Economics and Building, 1(01), 22-31.

Chan, A P C, Lai, M K, Tam, C M and Akintoye, A (2001) Analysis of construction cost variation factors. Journal of Financial Management of Property and Construction, 6(01), 51–60.

Chan, A P C, Scott, D and Chan, A P L (2004) Factors Affecting the Success of a Construction Project. Journal of Construction Engineering and Management, 130(01), 153–5.

Chan, D W M, Hung, H T W, Chan, A P C and Lo, T K K (2014) Overview of the development and implementation of the mandatory building inspection scheme (MBIS) in Hong Kong. Built Environment Project and Asset Management, 4(01), 71-89.

Chan, K H (2010) Critical factors in adopting cooling media for central air-conditioning systems in Hong Kong. Architectural Engineering and Design Management, 6(01), 31–47.

Chan, K H (2012) Critical factors in minimizing lighting energy. Architectural Engineering and Design Management, 8(01), 21-29.

Chang-Richards, Y, Wilkinson, S, Seville, E and Brunsdon, D (2017) Effects of a major disaster on skills shortages in the construction industry: Lessons learned from New Zealand. Engineering, Construction and Architectural Management, 24(01), 2-20.

Chang, C (2014) Principal-Agent Model of Risk Allocation in Construction Contracts and Its Critique. Journal of Construction Engineering and Management, 140(01).

Chang, C and Ko, J (2017) New Approach to Estimating the Standard Deviations of Lognormal Cost Variables in the Monte Carlo Analysis of Construction Risks. Journal of Construction Engineering and Management, 143(01).

Chang, Y, Wilkinson, S, Potangaroa, R and Seville, E (2011) Identifying factors affecting resource availability for post-disaster reconstruction: a case study in China. Construction Management and Economics, 29(01), 37–48.

Chang, Y, Wilkinson, S, Seville, E and Potangaroa, R (2010) Resourcing for a resilient post-disaster reconstruction environment. International Journal of Disaster Resilience in the Built Environment, 1(01), 65–83.

Chao, L and Skibniewski, M J (1995) Neural Network Method of Estimating Construction Technology Acceptability. Journal of Construction Engineering and Management, 121(01), 130–42.

Chaphalkar, N and Iyer, K (2014) Factors influencing decisions on delay claims in construction contracts for Indian scenario. Construction Economics and Building, 14(01), 32-44.

Chapman, R and Howden-Chapman, P (2021) Does reframing urban policy around wellbeing support carbon mitigation?. Buildings and Cities, 2(01), 688–99.

Chapman, R J (1999) The likelihood and impact of changes of key project personnel on the design process. Construction Management and Economics, 17(01), 99-106.

Chappells, H and Shove, E (2005) Debating the future of comfort: environmental sustainability, energy consumption and the indoor environment. Building Research & Information, 33(01), 32–40.

Chau, K W (1997) Note - Monte Carlo simulation of construction costs using subjective data: response. Construction Management and Economics, 15(01), 109-15.

Chau, K W (1998) The implications of the difference in the growth rates of the prices of building resources and outputs in Hong Kong. Engineering, Construction and Architectural Management, 5(01), 38–50.

Chau, K W (1995) The validity of the triangular distribution assumption in Monte Carlo simulation of construction costs: empirical evidence from Hong Kong. Construction Management and Economics, 13(01), 15-21.

Chau, K W, Raftery, J and Walker, A (1998) Note - The baby and the bathwater: research methods in construction management. Construction Management and Economics, 16(01), 99-104.

Che Ibrahim, C K I, Mohamad Sabri, N A, Belayutham, S and Mahamadu, A (2019) Exploring behavioural factors for information sharing in BIM projects in the Malaysian construction industry. Built Environment Project and Asset Management, 9(01), 15–28.

Cheah, C Y J and Liu, J (2005) Real option evaluation of complex infrastructure projects: the case of Dabhol Power in India. Journal of Financial Management of Property and Construction, 10(01), 55–68.

Cheah, C Y J, Kang, J and Chew, D A S (2007) Strategic analysis of large local construction firms in China. Construction Management and Economics, 25(01), 25-38.

Cheetham, D W, Kaka, A P and Humphreys, G (1997) Development and implementation of a system of financial planning and control for a medium sized building contractor. Journal of Financial Management of Property and Construction, 2(01), 5–34.

Chen, H-Y, Chang, Y-M and Chang, H-C (2016) A numerical definition-based systematic design approach for coupling consumers' image perception with product form. Journal of Engineering, Design and Technology, 14(01), 134-59.

Chen, J J (1997) China's construction industry and foreign investment. Building Research & Information, 25(01), 5–10.

Chen, L and Mohamed, S (2008) Impact of the internal business environment on knowledge management within construction organisations. Construction Innovation, 8(01), 61–81.

Chen, P H and Chang, L M (2002) Feasibility analysis of Taiwan high speed rail project. Journal of Construction Procurement, 8(01), 64–78.

Chen, Q, Christy, A, Owens, M, Bortz, D, Greene, W and King, B (2012) Two-Plus-Two Construction Management Programs and Articulation Agreements. International Journal of Construction Education and Research, 8(01), 4–25.

Chen, Y and Kamara, J M (2008) Using mobile computing for construction site information management. Engineering, Construction and Architectural Management, 15(01), 7–20.

Chen, Y Q, Zhang, S J, Liu, L S and Hu, J (2015) Risk perception and propensity in bid/no-bid decision-making of construction projects. Engineering, Construction and Architectural Management, 22(01), 2-20.

Chen, Z, Li, H and Wong, C T C (2005) {[}EnvironalPlanning{]}: Analytic Network Process Model for Environmentally Conscious Construction Planning. Journal of Construction Engineering and Management, 131(01), 92–101.

Chen, Z, Li, H and Wong, C T C (2003) Webfill before landfill: an e-commerce model for waste exchange in Hong Kong. Construction Innovation, 3(01), 27–43.

Chen, Z, Li, H, Kong, S C W and Xu, Q (2005) A knowledge-driven management approach to environmental-conscious construction. Construction Innovation, 5(01), 27–39.

Chen, Z, Li, H, Shen, Q and Xu, W (2004) An empirical model for decision-making on ISO 14000 acceptance in the Shanghai construction industry. Construction Management and Economics, 22(01), 55-73.

Cheng, E W L, Li, H, Love, P and Irani, Z (2004) A learning culture for strategic partnering in construction. Construction Innovation, 4(01), 53–65.

Cheng, E W L, Li, H, Shen, L Y and Fong, P S W (2002) Ranking of construction information for various functions of the general contractors: a preliminary study. Journal of Construction Research, 3(01), 181–91.

Cheng, M and Tsai, M (2003) Reengineering of Construction Management Process. Journal of Construction Engineering and Management, 129(01), 105–14.

Cheng, M, Su, C and You, H (2003) Optimal Project Organizational Structure for Construction Management. Journal of Construction Engineering and Management, 129(01), 70–79.

Chester, M and Hendrickson, C (2005) Cost Impacts, Scheduling Impacts, and the Claims Process during Construction. Journal of Construction Engineering and Management, 131(01), 102–7.

Cheung, E, Chan, A P C and Kajewski, S (2009) Enhancing value for money in public private partnership projects: Findings from a survey conducted in Hong Kong and Australia compared to findings from previous research in the UK. Journal of Financial Management of Property and Construction, 14(01), 7–20.

Cheung, S O and Pang, K H Y (2013) Anatomy of Construction Disputes. Journal of Construction Engineering and Management, 139(01), 15–23.

Cheung, S-O (1997) Risk allocation: an essential tool for construction project management. Journal of Construction Procurement, 3(01), 16–27.

Chew, A T W and Ling, F Y Y (2002) Increasing Singapore's construction productivity through construction process re-engineering. Journal of Construction Research, 3(01), 123–45.

Chew, M Y L and Silva, N D (2003) Maintainability problems of wet areas in high-rise residential buildings. Building Research & Information, 31(01), 60–9.

Childs, S, Ginige, T A and Pateman, H (2017) Deliberate concealment. International Journal of Law in the Built Environment, 9(01), 32-62.

Chileshe, N (2007) Quality management concepts, principles, tools and philosophies: A valid methodology for deployment within UK construction-related SMEs. Journal of Engineering, Design and Technology, 5(01), 49–67.

Chileshe, N and Haupt, T C (2010) The effect of age on the job satisfaction of construction workers. Journal of Engineering, Design and Technology, 8(01), 107–18.

Chinowsky, P S and Meredith, J E (2000) Strategic Management in Construction. Journal of Construction Engineering and Management, 126(01), 1–9.

Chinyio, E A, Olomolaiye, P O, Kometa, S T and Harris, F C (1998) A needs-based methodology for classifying construction clients and selecting contractors. Construction Management and Economics, 16(01), 91-8.

Chinyio, E and Morton, N (2006) The effectiveness of e-learning. Architectural Engineering and Design Management, 2(01), 73–86.

Chinyio, E, Suresh, S and Salisu, J B (2018) The impacts of monetary rewards on public sector employees in construction: A case of Jigawa state in Nigeria. Journal of Engineering, Design and Technology, 16(01), 125-42.

Chiu, H N and Tsai, D M (2002) An efficient search procedure for the resource-constrained multi-project scheduling problem with discounted cash flows. Construction Management and Economics, 20(01), 55-66.

Chiu, W Y B and Ng, F F (2015) The mediation influence of job satisfaction on organisational commitment amongst quantity surveyors. Construction Economics and Building, 15(01), 56-74.

Cho, C-S, Mazze, C E, Dika, S L and Gehrig, G B (2015) Enhancing construction education: Implementing habitat for humanity projects as service-learning for construction materials. International Journal of Construction Education and Research, 11(01), 4-20.

Cho, K and Hastak, M (2013) Time and Cost–Optimized Decision Support Model for Fast-Track Projects. Journal of Construction Engineering and Management, 139(01), 90–101.

Cho, Y, Haas, C T, Sreenivasan, S V and Liapi, K (2004) Position Error Modeling for Automated Construction Manipulators. Journal of Construction Engineering and Management, 130(01), 50–58.

Choi, S D (2007) Opportunities for improving productivity in roofing construction. International Journal of Construction Education and Research, 3(01), 67–77.

Choi, S D, Griinke, D and Lederer, M (2006) Fall protection equipment effects on productivity and safety in residential roofing construction. Journal of Construction Research, 7(01), 149–57.

Choi, S, Kim, D Y, Han, S H and Kwak, Y H (2014) Conceptual Cost-Prediction Model for Public Road Planning via Rough Set Theory and Case-Based Reasoning. Journal of Construction Engineering and Management, 140(01).

Choudhary, R and Tian, W (2014) Influence of district features on energy consumption in non-domestic buildings. Building Research & Information, 42(01), 32-46.

Choudhary, R, Papalambros, P Y and Malkawi, A (2005) A hierarchical design optimization approach for meeting building performance targets. Architectural Engineering and Design Management, 1(01), 57-76.

Chow, L J, Then, D and Skitmore, M (2005) Characteristics of teamwork in Singapore construction projects. Journal of Construction Research, 6(01), 15–46.

Chow, L K and Ng, S T (2010) Delineating the performance standards of engineering consultants at design stage. Construction Management and Economics, 28(01), 11.

Christian, J and Hachey, D (1995) Effects of Delay Times on Production Rates in Construction. Journal of Construction Engineering and Management, 121(01), 20–26.

Christina, S, Dainty, A, Daniels, K and Waterson, P (2014) How organisational behaviour and attitudes can impact building energy use in the UK retail environment: a theoretical framework. Architectural Engineering and Design Management, 10(01), 164-79.

Christos, V, John, E T and James, S (2011) The logistics of construction supply chains: the builders' merchant perspective. Engineering, Construction and Architectural Management, 18(01), 66–81.

Christudason, A (2009) Property rights: achieving a fine balance in collective sales of strata developments in Singapore. International Journal of Law in the Built Environment, 1(01), 26-41.

Chritamara, S and Ogunlana, S O (2001) Problems Experienced on Design and Build projects in Thailand. Journal of Construction Procurement, 7(01), 73–93.

Chua, D K and Godinot, M (2006) Use of a WBS Matrix to Improve Interface Management in Projects. Journal of Construction Engineering and Management, 132(01), 67–79.

Chua, D K H, Li, D Z and Chan, W T (2001) Case-Based Reasoning Approach in Bid Decision Making. Journal of Construction Engineering and Management, 127(01), 35–45.

Chun, C K, Heng, L and Skitmore, M (2012) The use of virtual prototyping for hazard identification in the early design stage. Construction Innovation, 12(01), 29–42.

Chunekar, A and Sreenivas, A (2019) Towards an understanding of residential electricity consumption in India. Building Research & Information, 47(01), 75–90.

Clarke, L, Sahin-Dikmen, M and Winch, C (2020) Transforming vocational education and training for nearly zero-energy building. Buildings and Cities, 1(01), 650–61.

Clements-Croome, D (2005) Designing the indoor environment for people. Architectural Engineering and Design Management, 1(01), 45-55.

Clevenger, C M and Ozbek, M E (2013) Teaching Sustainability through Service-Learning in Construction Education. International Journal of Construction Education and Research, 9(01), 3-18.

Coaffee, J, Clarke, J and Davis, P T (2016) A HARMONISE’d approach to building security-driven urban resilience: a call to arms. Journal of Financial Management of Property and Construction, 21(01), 73-80.

Coble, R J and Haupt, T C (2000) Effecting safety in affordable housing projects using automation. Journal of Construction Research, 1(01), 1–8.

Codinhoto, R and Kiviniemi, A (2017) Evidencing changes in design practice. Architectural Engineering and Design Management, 13(01), 1–2.

Coenen, T B J, Visscher, K and Volker, L (2023) A systemic perspective on transition barriers to a circular infrastructure sector. Construction Management and Economics, 41(01), 22–43.

Cohenca, D, Laufer, A and Ledbetter, W B (1989) Factors Affecting Construction Planning Efforts. Journal of Construction Engineering and Management, 115(01), 70–89.

Cole, R J (1998) Emerging trends in building environmental assessment methods. Building Research & Information, 26(01), 3–16.

Cole, R J (0) Transition to a regenerative future: a question of time. Buildings and Cities, 4(01), 457–74.

Cole, R J (2012) Transitioning from green to regenerative design. Building Research & Information, 40(01), 39–53.

Cole, R J and Fedoruk, L (2015) Shifting from net-zero to net-positive energy buildings. Building Research & Information, 43(01), 111-20.

Cole, R J, Busby, P, Guenther, R, Briney, L, Blaviesciunaite, A and Alencar, T (2012) A regenerative design framework: setting new aspirations and initiating new discussions. Building Research & Information, 40(01), 95–111.

Coleman, E, Nooni, I K, Fianko, S K, Dadzie, L, Neequaye, E N, Owusu-Agyemang, J and Ansa-Asare, E O (2020) Assessing contract management as a strategic tool for achieving quality of work in Ghanaian construction industry. Journal of Financial Management of Property and Construction, 25(01), 41–60.

Colin, J and Vanhoucke, M (2016) Empirical Perspective on Activity Durations for Project-Management Simulation Studies. Journal of Construction Engineering and Management, 142(01).

Colwell, D A F and Ariaratnam, S T (2003) Evaluation of High-Density Polyethylene Pipe Installed Using Horizontal Directional Drilling. Journal of Construction Engineering and Management, 129(01), 47–55.

Comelli, T, Pelling, M, Hope, M, Ensor, J, Filippi, M E, Menteşe, E Y and McCloskey, J (0) Normative future visioning: a critical pedagogy for transformative adaptation. Buildings and Cities, 5(01), 83–100.

Consoli, G G S (2004) Conducting an ethno-methodological study for the comparison of private and public prison delivery processes in Australia. Journal of Construction Procurement, 10(01).

Consoli, G G S (2006) Correctional management attitudes to private prison design and construction briefs in Australia. Journal of Construction Research, 7(01), 99–109.

Contarini, A and Meijer, A (2015) LCA comparison of roofing materials for flat roofs. Smart and Sustainable Built Environment, 4(01), 97-109.

Cook, M J, Shukla, Y, Rawal, R, Angelopoulos, C, Caruggi-De-Faria, L, Loveday, D, Spentzou, E and Patel, J (2022) Integrating low energy cooling and ventilation strategies in Indian residences. Buildings and Cities, 3(01), 279–96.

Cooke, T (2013) Can knowledge sharing mitigate the effect of construction project complexity?. Construction Innovation, 13(01), 5-9.

Costa, L, Barbosa, M B A, Baldam, R d L and Coelho, T d P (2019) Challenges of Process Modeling in Architecture and Engineering to Execute Projects and Public Works. Journal of Construction Engineering and Management, 145(01).

Cottrell, W D (1999) Simplified Program Evaluation and Review Technique (PERT). Journal of Construction Engineering and Management, 125(01), 16–22.

Cox, A and Thompson, I (1998) Has contracting lost its customer focus?. Journal of Construction Procurement, 4(01), 5–15.

Craig, R (1999) How innovative is the common law of tendering?. Journal of Construction Procurement, 5(01), 15–26.

Craig, R (2000) Re-engineering the tender code for construction works. Construction Management and Economics, 18(01), 91-100.

Crawford, R H (2005) Validation of the use of input-output data for embodied energy analysis of the Australian construction industry. Journal of Construction Research, 6(01), 71–90.

Crawford, R H, Treloar, G J, Iiozor, B D and Love, P E D (2003) Competitive greenhouse emissions analysis of domestic solar hot water systems. Building Research & Information, 31(01), 34–47.

Crawley, J, Biddulph, P, Wingfield, J, Ashdown, M, Lowe, R and Elwell, C (2019) Inferring the as-built air permeability of new UK dwellings. International Journal of Building Pathology and Adaptation, 38(01), 3–19.

Crawley, J, McKenna, E, Gori, V and Oreszczyn, T (2020) Creating Domestic Building Thermal Performance Ratings Using Smart Meter Data. Buildings and Cities, 1(01), 1–13.

Crawley, J, Wade, F and de Wilde, M (0) Gender and the heat pump transition. Buildings and Cities, 4(01), 948–64.

Criado-Perez, C, Collins, C G, Jackson, C J, Oldfield, P, Pollard, B and Sanders, K (2020) Beyond an ‘informed opinion’: evidence-based practice in the built environment. Architectural Engineering and Design Management, 16(01), 23–40.

Criado-Perez, C, Shinkle, G A, Höllerer, M A, Sharma, A, Collins, C, Gardner, N, Hank Haeusler, M and Pan, S (2022) Digital Transformation in the Australian AEC Industry: Prevailing Issues and Prospective Leadership Thinking. Journal of Construction Engineering and Management, 148(01).

Croffi, J, Kroll, D, Soebarto, V, Barrie, H and McDougall, K (0) Wellbeing fostered by design: a framework for evaluating indoor environment performance. Buildings and Cities, 4(01), 507–23.

Crosbie, T and Baker, K (2010) Energy-efficiency interventions in housing: learning from the inhabitants. Building Research & Information, 38(01), 9.

Crowley, L G (1997) Robust Statistical Estimators for Use within Competitive Bid Data. Journal of Construction Engineering and Management, 123(01), 53–63.

Cruz-Bello, G M, Galeana-Pizaña, J M and González-Arellano, S (2023) Urban growth in peri-urban, rural and urban areas: Mexico City. Buildings and Cities, 4(01), 1–16.

Cuervo, J C and Pheng, L S (2003) Ownership advantages/disadvantages of Singapore transnational construction corporations. Construction Management and Economics, 21(01), 81-94.

Cui, Q, Johnson, P, Quick, A and Hastak, M (2008) Valuing the Warranty Ceiling Clause on New Mexico Highway 44 Using a Binomial Lattice Model. Journal of Construction Engineering and Management, 134(01), 10–17.

Cumiskey, L, Werner, M, Meijer, K, Fakhruddin, S H M and Hassan, A (2015) Improving the social performance of flash flood early warnings using mobile services. International Journal of Disaster Resilience in the Built Environment, 6(01), 57-72.

Curwell, S and Cooper, I (1998) The implication of urban sustainability. Building Research & Information, 26(01), 17–28.

Curwell, S, Deakin, M, Cooper, I, Paskaleva-Shapira, K, Ravetz, J and Babicki, D (2005) Citizens' expectations of information cities: implications for urban planning and design. Building Research & Information, 33(01), 55–66.

Cushman, N S, Nam, C H and Tatum, C B (1992) Technology Transfer in Building Construction—Case of Seismic Design. Journal of Construction Engineering and Management, 118(01), 129–41.

Czekajlo, A, Alva, J, Szeto, J, Girling, C and Kellett, R (0) Impact of 2050 tree shading strategies on building cooling demands. Buildings and Cities, 4(01), 817–37.

D. A., V (1986) Owner and Contractor Review to Reduce Claims. Journal of Construction Engineering and Management, 112(01), 104–11.

Dada, J O and Jagboro, G O (2007) An evaluation of the impact of risk on project cost overrun in the Nigerian construction industry. Journal of Financial Management of Property and Construction, 12(01), 37–44.

Dada, M O (2014) The influence of project team relationships on cost growth. Journal of Financial Management of Property and Construction, 19(01), 76-94.

Dadzie, J, Runeson, G and Ding, G (2019) Assessing determinants of sustainable upgrade of existing buildings. Journal of Engineering, Design and Technology , 18(01), 270–92.

Daget, Y T and Zhang, H (2019) Decision-making model for the evaluation of industrialized housing systems in Ethiopia. Engineering, Construction and Architectural Management, 27(01), 296–320.

Dai, F, Rashidi, A, Brilakis, I and Vela, P (2013) Comparison of Image-Based and Time-of-Flight-Based Technologies for Three-Dimensional Reconstruction of Infrastructure. Journal of Construction Engineering and Management, 139(01), 69–79.

Dainty, A R J, Bagilhole, B M, Ansari, K H and Jackson, J (2004) Creating equality in the construction industry: an agenda for change for women and ethnic minorities. Journal of Construction Research, 5(01), 75–86.

Dainty, A R J, Raiden, A B and Neale, R H (2004) Psychological contract expectations of construction project managers. Engineering, Construction and Architectural Management, 11(01), 33–44.

Dalgliesh, C D, Bowen, P A and Hill, R C (1997) Environmental sustainability in the delivery of affordable housing in South Africa. Engineering, Construction and Architectural Management, 4(01), 23–39.

Damodaran, L, Hansen, J R, Hassan, T M and Olphert, C W (1999) Impact of Large Scale Engineering products and processes on society-the eLSEwise view. Engineering, Construction and Architectural Management, 6(01), 63–70.

Dang, C N and Le-Hoai, L (2016) Critical success factors for implementation process of design-build projects in Vietnam. Journal of Engineering, Design and Technology, 14(01), 17-32.

Dang, C N, Le-Hoai, L, Kim, S-Y, Nguyen, C V, Lee, Y-D and Lee, S-H (2017) Identification of risk patterns in Vietnamese road and bridge construction: Contractor’s perspective. Built Environment Project and Asset Management, 7(01), 59-72.

Dann, N, Hills, S and Worthing, D (2006) Assessing how organizations approach the maintenance management of listed buildings. Construction Management and Economics, 24(01), 97-104.

Daoud, O E K (1997) The Architect/Engineer's Role in Rehabilitation Work. Journal of Construction Engineering and Management, 123(01), 1–5.

Darby, S J (2018) Smart technology in the home: time for more clarity. Building Research & Information, 46(01), 140–7.

Darrington, J W and Howell, G A (2011) Motivation and incentives in relational contracts. Journal of Financial Management of Property and Construction, 16(01), 42–51.

Das, D K and Emuze, F (2021) Design delays in building projects in India: Effects and remedies. Construction Economics and Building, 21(01), 22-44.

Dave, B (2017) Business process management: A construction case study. Construction Innovation, 17(01), 50-67.

Davenport, D M and Smith, R (1995) International procurement systems: assessment of required levels of client participation in construction projects. Journal of Construction Procurement, 1(01), 38–49.

Davey, C L, Lowe, D J and Duff, A R (2001) Generating opportunities for SMEs to develop partnerships and improve performance. Building Research & Information, 29(01), 1–11.

Davey, C L, Powell, J A, Powell, J E and Cooper, I (2002) Action learning in a medium-sized construction company. Building Research & Information, 30(01), 5–15.

Davidson, C H (2009) The challenge of organizational design for manufactured construction. Construction Innovation, 9(01), 42–57.

Davies, K, McMeel, D J and Wilkinson, S (2017) Making friends with Frankenstein: Hybrid practice in BIM. Engineering, Construction and Architectural Management, 24(01), 78-93.

Davies, M, Jackaway, A, Hardy, R, Dewey, E and Littler, J (2000) A translucent louvre system: design concepts, modelling work and monitored data. Building Research & Information, 28(01), 42–50.

Davila Delgado, J M, Oyedele, L, Bilal, M, Ajayi, A, Akanbi, L and Akinade, O (2020) Big Data Analytics System for Costing Power Transmission Projects. Journal of Construction Engineering and Management, 146(01).

Davis, C and Cochrane, S R (1987) Optimization of future manpower requirements in a multi-discipline consultancy. Construction Management and Economics, 5(01), 45-56.

Dawood, N and Sriprasert, E (2006) Construction scheduling using multi-constraint and genetic algorithms approach. Construction Management and Economics, 24(01), 19-30.

Dawood, N N (1995) An integrated knowledge-based/simulation approach to production planning: an application to the pre-cast industry. Construction Management and Economics, 13(01), 53-64.

Dawood, N N (2001) Development of a Forecasting Methodology for Cost Indices: An Application to the Greek Construction Industry. Journal of Construction Procurement, 7(01), 42–50.

Dawood, N N (1998) Estimating project and activity duration: a risk management approach using network analysis. Construction Management and Economics, 16(01), 41-8.

Day, A K (1996) The Maquette, the model and the computer: organizational futures for design and construction. Engineering, Construction and Architectural Management, 3(01), 15-28.

de Blois, M, Herazo-Cueto, B, Latunova, I and Lizarralde, G (2011) Relationships between construction clients and participants of the building industry: structures and mechanisms of coordination and communication. Architectural Engineering and Design Management, 7(01), 3–22.

de Feijter, F J (2023) Trust in circular design: active stakeholder participation in Chinese and Dutch housing retrofit projects. Building Research & Information, 51(01), 105–18.

De Marco, A, Mangano, G and Narbaev, T (2017) The influence of risk on the equity share of build-operate-transfer projects. Built Environment Project and Asset Management, 7(01), 45-58.

De Silva, G, Perera, B and Rodrigo, M (2019) Adaptive reuse of buildings: the case of Sri Lanka. Journal of Financial Management of Property and Construction, 24(01), 79–96.

de Souza, M P, Fialho, B C, Ferreira, R C, Fabricio, M M and Codinhoto, R (2023) Modelling and coordination of building design: an experience of BIM learning/upskilling. Architectural Engineering and Design Management, 19(01), 74–91.

de Toldi, T and Pestre, T (0) The relevance of cut-stone to strategies for low-carbon buildings. Buildings and Cities, 4(01), 229–57.

de Toldi, T, Craig, S and Sushama, L (2022) Internal thermal mass for passive cooling and ventilation: adaptive comfort limits, ideal quantities, embodied carbon. Buildings and Cities, 3(01), 42–67.

de Valence, G (2001) Defining an industry: what is the size and scope of the Australian building and construction industry. Construction Economics and Building, 1(01), 53-65.

de Valence, G (2007) The significance of barriers to entry in the construction industry. Construction Economics and Building, 7(01), 29-36.

De Waegemaeker, J, Kerselaers, E, Van Acker, M and Rogge, E (2017) Design workshops in the age of climate change: Analysis of a design workshop on drought in Flanders. Smart and Sustainable Built Environment, 6(01), 48-63.

Deakin, M (1998) Local Authority property management: a management exercise. Journal of Financial Management of Property and Construction, 3(01), 43–72.

Deakin, M (1997) The development of computer-based information systems for local authority property management: the underlying issues. Journal of Financial Management of Property and Construction, 2(01), 59–82.

Deakin, M (2000) The development of property asset management: towards a pro-investment form. Journal of Financial Management of Property and Construction, 5(01), 15–31.

Deb, A (1998) Sustainable cities in developing countries. Building Research & Information, 26(01), 29–38.

Deepak, B B V L, Bahubalendruni, R M V A, Rao, C A and Nalini, J (2017) Computer aided weld seam tracking approach. Journal of Engineering, Design and Technology, 15(01), 31-43.

Delaney, F T and Wamuziri, S C (2004) The impact of mergers and acquisitions on shareholder wealth in the UK construction industry. Engineering, Construction and Architectural Management, 11(01), 65–73.

Deloly, C, Roue-le Gall, A, Moore, G, Bretelle, L, Milner, J, Mohajeri, N, Osrin, D, Salvia, G, Symonds, P, Tsoulou, I, Zimmermann, N, Wilkinson, P and Davies, M (2021) Relationship-building around a policy decision-support tool for urban health. Buildings and Cities, 2(01), 717–33.

Deng, H, Hong, H, Luo, D, Deng, Y and Su, C (2020) Automatic Indoor Construction Process Monitoring for Tiles Based on BIM and Computer Vision. Journal of Construction Engineering and Management, 146(01).

Deng, X, Ding, S and Tian, Q (2004) Reasons underlying a mandatory high penalty construction contract bonding system. Journal of Construction Engineering and Management, 130(01), 67–74.

Deng, Y and Poon, S W (2013) Meeting sustainability challenges of mega-event flagships. Engineering, Construction and Architectural Management, 20(01), 46-62.

Deng, Y and Poon, S W (2011) Mega-challenges for mega-event flagships. Architectural Engineering and Design Management, 7(01), 23–37.

Denny-Smith, G, Williams, M, Loosemore, M, Sunindijo, R Y and Piggott, L (2024) What social value do Indigenous contractors create?. Construction Management and Economics, 42(01), 16–34.

Desta, S, Root, D and Diederichs, C J (2006) The practice of project management office (PMO) concept within the German architect, engineer, contractor (AEC) sector. Journal of Engineering, Design and Technology, 4(01), 46–59.

Dester, W S and Blockley, D L (1995) Safety: behaviour and culture in construction. Engineering, Construction and Architectural Management, 2(01), 17–26.

Dethridge, L and Quinn, B (2016) Realtime emergency communication in virtual worlds. International Journal of Disaster Resilience in the Built Environment, 7(01), 26-39.

Devkar, G A and Kalidindi, S N (2013) External agencies for supplementing competencies in Indian urban PPP projects. Built Environment Project and Asset Management, 3(01), 58-73.

Devkar, G A and Kalidindi, S N (2013) Modeling and assessment of competencies in urban local bodies for implementing PPP projects. Built Environment Project and Asset Management, 3(01), 42-57.

Dhandapani, K and Sathi, R R (2011) Embedded controlled low-frequency AC to high-frequency AC converter fed induction heater. Journal of Engineering, Design and Technology, 9(01), 7–18.

Dias, A and Ioannou, P G (1996) Company and Project Evaluation Model for Privately Promoted Infrastructure Projects. Journal of Construction Engineering and Management, 122(01), 71–82.

Diaz, C F and Hadipriono, F C (1993) Nondeterministic Networking Methods. Journal of Construction Engineering and Management, 119(01), 40–57.

Diekmann, J E and Nelson, M C (1985) Construction Claims: Frequency and Severity. Journal of Construction Engineering and Management, 111(01), 74–81.

Diekmann, J E and Peppler, S E (1984) Union and Open Shop Labor Cost Differences. Journal of Construction Engineering and Management, 110(01), 87–99.

Diekmann, J, Ashley, D, Bauman, R, Carroll, J and Finlayson, F (2000) Viability of Privatised Transportation Projects: An Evaluation Tool For Design/Build Teams. Journal of Construction Procurement, 6(01), 33–43.

Dikmen, I and Birgonul, M T (2004) Neural Network Model to Support International Market Entry Decisions. Journal of Construction Engineering and Management, 130(01), 59–66.

Ding, G and Forsythe, P (2016) A comparative study of floor construction on sloping sites: an analysis of cumulative energy demand and greenhouse gas emissions. Construction Economics and Building, 16(01), 33-49.

Ding, G K C (2005) Developing a multicriteria approach for the measurement of sustainable performance. Building Research & Information, 33(01), 3–16.

Dioguardi, G (1983) Macrofirms: Construction Firms for the Computer Age. Journal of Construction Engineering and Management, 109(01), 13–24.

Dissart, J and Ricaurte, L (0) Assessing social value in housing design: contributions of the capability approach. Buildings and Cities, 4(01), 867–82.

Djebbar, K E, Salem, S and Mokhtari, A (2019) Assessment of energy performance using bottom-up method. International Journal of Building Pathology and Adaptation, 38(01), 192–216.

Dobbelsteen, A v d, Arets, M and Nunes, R (2007) Sustainable design of supporting structures: Optimal structural spans and component combinations for effective improvement of environmental performance. Construction Innovation, 7(01), 54–71.

Dobgegah, R Owusu-Manu, D-G and Omoteso, K (2011) A principal component analysis of project management construction industry competencies for the Ghanaian. Construction Economics and Building, 11(01), 26-40.

Dolla, T and Laishram, B (2019) Prequalification in municipal solid waste management public-private partnerships of India . Construction Economics and Building, 19(01), 40-56.

Doloi, H (2010) Benchmarking a new design management system using process simulation approach. Construction Innovation, 10(01), 59.

Domínguez-Amarillo, S, Fernández-Agüera, J, Peacock, A and Acosta, I (2020) Energy related practices in Mediterranean low-income housing. Building Research & Information, 48(01), 34–52.

Dominic, A-D D and Smith, S D (2014) Rethinking construction cost overruns: cognition, learning and estimation. Journal of Financial Management of Property and Construction, 19(01), 38-54.

Donato, V (2017) Towards design process validation integrating graph theory into BIM. Architectural Engineering and Design Management, 13(01), 22–38.

Dosumu, O, S (2018) Perceived Effects of Prevalent Errors in Contract Documents on Construction Projects . Construction Economics and Building, 18(01), 1-26.

Dowd, V G (1996) The effect of economic cycles on the development and use of alternative procurement systems in the UK construction industry during the period 1965-1995. Journal of Construction Procurement, 2(01), 11–29.

Dowdle, D L (2006) Engaging learners. Architectural Engineering and Design Management, 2(01), 31–48.

Dowsett, R M, Green, M S and Harty, C F (2022) Speculation beyond technology: building scenarios through storytelling. Buildings and Cities, 3(01), 534–53.

Dozzi, P, Hartman, F, Tidsbury, N and Ashrafi, R (1996) More-Stable Owner-Contractor Relationships. Journal of Construction Engineering and Management, 122(01), 30–35.

Drew, D S, Tang, S L Y and Lo, H P (2002) Developing a tendering strategy in two-envelope fee tendering based on technical score-fee variability. Construction Management and Economics, 20(01), 67-81.

Dritsa, D and Biloria, N (2018) Towards a multi-scalar framework for smart healthcare. Smart and Sustainable Built Environment, 7(01), 33–52.

Drury, P, Watson, S and Lomas, K J (2021) Summertime overheating in UK homes: is there a safe haven?. Buildings and Cities, 2(01), 970–90.

du Plessis, C (2012) Towards a regenerative paradigm for the built environment. Building Research & Information, 40(01), 7–22.

Du, J J, Zhou, J, Liu, C and Picken, D (2006) Exploring turnover intention of construction managers in China. Journal of Construction Research, 7(01), 191–205.

Du, J, Jing, H, Castro-Lacouture, D and Sugumaran, V (2019) Multi-agent simulation for managing design changes in prefabricated construction projects. Engineering, Construction and Architectural Management, 27(01), 270–95.

Du, J, Zhao, D and Zhang, O (2019) Impacts of human communication network topology on group optimism bias in Capital Project Planning: a human-subject experiment. Construction Management and Economics, 37(01), 44–60.

Duerr, D (1990) Lift of Shippingport Reactor Pressure Vessel. Journal of Construction Engineering and Management, 116(01), 188–97.

Duff, A R, Robertson, I T, Phillips, R A and Cooper, M D (1994) Improving safety by the modification of behaviour. Construction Management and Economics, 12(01), 67-78.

Duffield, C (1998) Commercial viability of privately financed heating systems in Europe: a case study. Engineering, Construction and Architectural Management, 5(01), 3–8.

Duggan, G P, Bauleo, P, Authier, M, Aloise-young, P A, Care, J and Zimmerle, D (0) Electricity consumption in commercial buildings during Covid-19. Buildings and Cities, 4(01), 851–66.

Duksh, Y S, Kaushik, B K, Sarkar, S and Singh, R (2013) Analysis of propagation delay and power with variation in driver size and number of shells in multi walled carbon nanotube interconnects. Journal of Engineering, Design and Technology, 11(01), 19-33.

Dulaimi, M F (2005) The challenge of customer orientation in the construction industry. Construction Innovation, 5(01), 3–12.

Dulaimi, M F (2005) The influence of academic education and formal training on the project manager's behavior. Journal of Construction Research, 6(01), 179–93.

Dumbuya, B and Nirupama, N (2017) Disasters and long-term economic sustainability: a perspective on Sierra Leone. International Journal of Disaster Resilience in the Built Environment, 8(01), 58-76.

Dunlop, P and Smith, S D (2004) Planning, estimation and productivity in the lean concrete pour. Engineering, Construction and Architectural Management, 11(01), 55–64.

Dunn, B (2004) The regionalization of international contracting and its implications for models of construction spending. Construction Management and Economics, 22(01), 93-100.

Dunston, P S and Reed, A G (2000) Benefits of Small Projects Team Initiative. Journal of Construction Engineering and Management, 126(01), 22–28.

Durdyev, S, Hosseini, M R, Martek, I, Ismail, S and Arashpour, M (2019) Barriers to the use of integrated project delivery (IPD): a quantified model for Malaysia. Engineering, Construction and Architectural Management, 27(01), 186–204.

Duren, J V, Dorée, A and Voordijk, H (2015) Perceptions of success in performance-based procurement: Differences between clients and contractors. Construction Innovation, 15(01), 107-28.

Dursun, O and Stoy, C (2011) Time-cost relationship of building projects: statistical adequacy of categorization with respect to project location. Construction Management and Economics, 29(01), 97–106.

Duryan, M and Smyth, H (2019) Service design and knowledge management in the construction supply chain for an infrastructure programme. Built Environment Project and Asset Management, 9(01), 118–37.

Dykes, C and Baird, G (2014) Performance benchmarks for non-domestic buildings: towards user perception benchmarks. Building Research & Information, 42(01), 62-71.

Dyson, K, Matthews, J and Love, P E D (2016) Critical success factors of adapting heritage buildings: An exploratory study. Built Environment Project and Asset Management, 6(01), 44-57.

Dzeng, R J, Tserng, H P and Wang, W C (2005) Automating Schedule Review for Expressway Construction. Journal of Construction Engineering and Management, 131(01), 127–36.

Dzeng, R J, Wang, W C and Tserng, H P (2004) Module-Based Construction Schedule Administration for Public Infrastructure Agencies. Journal of Construction Engineering and Management, 130(01), 5–14.

Dzeng, R-J and Wang, S-S (2008) An analysis of infrastructure development based on national competitiveness perspectives. Construction Management and Economics, 26(01), 47–61.

Eadie, R, Browne, M, Odeyinka, H, McKeown, C and McNiff, S (2015) A survey of current status of and perceived changes required for BIM adoption in the UK. Built Environment Project and Asset Management, 5(01), 4-21.

Eadie, R, Browne, M, Odeyinka, H, McKeown, C and McNiff, S (2015) A survey of current status of and perceived changes required for BIM adoption in the UK. Built Environment Project and Asset Management, 5(01), 4-21.

Eadie, R, Millar, P and Grant, R (2013) PFI/PPP, private sector perspectives of UK transport and healthcare. Built Environment Project and Asset Management, 3(01), 89-104.

Easa, S M (1987) Earthwork Allocations with Nonconstant Unit Costs. Journal of Construction Engineering and Management, 113(01), 34–50.

Eaton, D, Akbiyikli, R, Lemos, T d, Gunnigan, L, Kutanis, R O, Casensky, M, Ladra, J and Sawalhi, N E (2007) An examination of the suitability of a UK PFI model within the Czech Republic, the Republic of Ireland, Palestine (Gaza-West Bank), Portugal and Turkey. Construction Innovation, 7(01), 122–42.

Eccles, T and Pointing, J (2013) Smart regulation, shifting architectures and changes in governance. International Journal of Law in the Built Environment, 5(01), 71-88.

Echeverry, D, Ibbs, C W and Burati, J (1988) Graduated Unit Price Payment Schedules. Journal of Construction Engineering and Management, 114(01), 1–18.

Echeverry, D, Ibbs, C W and Kim, S (1991) Sequencing Knowledge for Construction Scheduling. Journal of Construction Engineering and Management, 117(01), 118–30.

Edison, J C and Singla, H K (2020) Development of a scale for factors causing delays in infrastructure projects in India. Construction Economics and Building, 20(01), 36-55.

Edkins, A J and Smyth, H J (2006) The imperative of trust in PPPs: evaluations from the provision of ‘full service’ contracts. Journal of Construction Procurement, 12(01).

Edum-Fotwe, F T, Kululanga, G K and McCaffer, R (2000) Application of organic learning styles to construction management. Journal of Construction Research, 1(01), 53–8.

Edwards, D J and Holt, G D (2008) Construction workers' health and safety knowledge: Initial observations on some test-result data. Journal of Engineering, Design and Technology, 6(01), 65–80.

Edwards, D J and Holt, G D (2000) ESTIVATE: a model for calculating excavator productivity and output costs. Engineering, Construction and Architectural Management, 7(01), 52–62.

Edwards, D J and Holt, G D (2006) Hand-arm vibration controls: a perspective based on performance and cost dimensions. Journal of Financial Management of Property and Construction, 11(01), 21–32.

Edwards, D J and Holt, G D (2000) Quantifying the cost of plant operators' productivity. Journal of Financial Management of Property and Construction, 5(01), 85–92.

Edwards, D J and Holt, G D (2010) The case for '3D triangulation' when applied to construction management research. Construction Innovation, 10(01), 25–41.

Edwards, D J, Holt, G D and Harris, F C (2000) A model for predicting plant maintenance costs. Construction Management and Economics, 18(01), 65-75.

Edwards, D J, Holt, G D and Harris, F C (1999) Predicting maintenance expenditure on construction plant: model development and performance analysis. Journal of Financial Management of Property and Construction, 4(01), 31–46.

Edwards, D J, Owusu-Manu, D-G, Baiden, B, Badu, E and Love, P E (2017) Financial distress and highway infrastructure delays. Journal of Engineering, Design and Technology, 15(01), 118-32.

Edwards, D J, Thorpe, T and Love, P (2004) Financial implications of poorly utilised construction plant and equipment. Journal of Financial Management of Property and Construction, 9(01), 3–12.

Edwards, P J and Bowen, P A (1998) Practices, barriers and benefits of risk management process in building services cost estimation: comment. Construction Management and Economics, 16(01), 105-8.

Edwards, P J and Bowen, P A (1999) Risk and risk management in construction projects: concepts, terms and risk categories re-defined. Journal of Construction Procurement, 5(01), 47–57.

Egbu, C O (1999) Skills, knowledge and competencies for managing construction refurbishment works. Construction Management and Economics, 17(01), 29-43.

Ehrhardt, D, Behnisch, M, Jehling, M and Michaeli, M (0) Mapping soft densification: a geospatial approach for identifying residential infill potentials. Buildings and Cities, 4(01), 193–211.

Ehrlich, M, Woodward, D and Tiong, R (2012) A state-of-practice survey on managing FX exposure in project companies, construction companies and SMEs. Journal of Financial Management of Property and Construction, 17(01), 29-48.

Ehwi, R J, Oti-Sarpong, K, Shojaei, R and Burgess, G (2022) Offsite Manufacturing Research: A Systematic Review of Methodologies Used. Construction Management and Economics, 40(01), 1–24.

Ekambaram, P, Love, P E D, Kumaraswamy, M M and Ng, T S T (2014) Causal ascription of rework in building and civil engineering projects: A multivariate exploration. Engineering, Construction and Architectural Management, 21(01), 111-26.

Ekeskär, A, Havenvid, & I, Karrbom Gustavsson, T and Eriksson, P E (2022) Construction logistics in a multi-project context: coopetition among main contractors and the role of third-party logistics providers. Construction Management and Economics, 40(01), 25–40.

El Asmar, M, Hanna, A S and Loh, W (2016) Evaluating Integrated Project Delivery Using the Project Quarterback Rating. Journal of Construction Engineering and Management, 142(01).

El-adaway, I H, Ali, G G, Abotaleb, I S and Barber, H M (2020) Studying the Relationship between Stock Prices of Publicly Traded US Construction Companies and Gross Domestic Product: Preliminary Step toward Construction–Economy Nexus. Journal of Construction Engineering and Management, 146(01).

El-Diraby, T E (2012) Epistemology of Construction Informatics. Journal of Construction Engineering and Management, 138(01), 53–65.

El-Higzi, F (2002) Foreign market selection factors in the Australian construction services sector. Construction Economics and Building, 2(01), 107-120.

El-Mashaleh, M S, Hyari, K H, Bdour, A N and Rababeh, S M (2016) A multi-attribute decision-making model for construction enterprise resource planning system selection. International Journal of Construction Education and Research, 12(01), 66-79.

El-Rayes, K and Moselhi, O (2001) Optimizing Resource Utilization for Repetitive Construction Projects. Journal of Construction Engineering and Management, 127(01), 18–27.

El-Sayegh, S M and Al-Haj, R (2017) A new framework for time-cost trade-off considering float loss impact. Journal of Financial Management of Property and Construction, 22(01), 20-36.

Elazouni, A M (1997) Constructability Improvement of Steel Silos during Field Operations. Journal of Construction Engineering and Management, 123(01), 21–25.

Elazouni, A M and Gab-Allah, A A (2004) Finance-Based Scheduling of Construction Projects Using Integer Programming. Journal of Construction Engineering and Management, 130(01), 15–24.

Elazouni, A M and Metwally, F G (2007) Expanding Finance-Based Scheduling to Devise Overall-Optimized Project Schedules. Journal of Construction Engineering and Management, 133(01), 86–90.

Elazouni, A M, Ali, A E and Abdel-Razek, R H (2005) Estimating the Acceptability of New Formwork Systems Using Neural Networks. Journal of Construction Engineering and Management, 131(01), 33–41.

Elazouni, A, Alghazi, A and Selim, S Z (2015) Finance-based scheduling using meta-heuristics: discrete versus continuous optimization problems. Journal of Financial Management of Property and Construction, 20(01), 85-104.

Eldin, N N (1991) Management of Engineering/Design Phase. Journal of Construction Engineering and Management, 117(01), 163–75.

Eldin, N N and Egger, S (1990) Productivity Improvement Tool: Camcorders. Journal of Construction Engineering and Management, 116(01), 100–11.

Elhag, T M S and Boussabaine, A H (2002) Tender price estimation using artificial neural networks II: modelling. Journal of Financial Management of Property and Construction, 7(01), 49–64.

Elhag, T, Eapen, S and Ballal, T (2020) Moderating claims and disputes through collaborative procurement. Construction Innovation , 20(01), 79–95.

Elliman, T and Orange, G (2003) Developing distributed design capabilities in the construction supply chain. Construction Innovation, 3(01), 15–26.

Elliott, J W, Thevenin, M K and Lopez del Puerto, C (2016) Role of gender and industry experience in construction management student self-efficacy, motivation, and planned behavior. International Journal of Construction Education and Research, 12(01), 3-17.

Elmousalami, H H (2020) Artificial Intelligence and Parametric Construction Cost Estimate Modeling: State-of-the-Art Review. Journal of Construction Engineering and Management, 146(01).

Elmualim, A, Czwakiel, A, Valle, R, Ludlow, G and Shah, S (2009) The practice of sustainable facilities management: design sentiments and the knowledge chasm. Architectural Engineering and Design Management, 5(01), 91–102.

Emetere, M E (2019) A modified approach to estimating thermodynamic impact on buildings. Journal of Engineering, Design and Technology, 17(01), 115–35.

Emmanuel, R (2021) Urban microclimate in temperate climates: a summary for practitioners. Buildings and Cities, 2(01), 402–10.

Emmitt, S (2016) Editorial. Architectural Engineering and Design Management, 12(01), 1–2.

Emmitt, S (2006) Investigating the synergy between teaching and research in a teaching-led university. Architectural Engineering and Design Management, 2(01), 61–72.

Emmitt, S (2001) Technological gatekeepers: the management of trade literature by design offices. Engineering, Construction and Architectural Management, 8(01), 2–8.

Emsley, M (2005) A benefits analysis of partnering: a case study of a Community Primary School. Journal of Financial Management of Property and Construction, 10(01), 69–80.

English, J and Hay, P (2015) Black South African women in construction: cues for success. Journal of Engineering, Design and Technology, 13(01), 144-64.

English, J, Haupt, T C and Smallwood, J J (2006) Women, construction and health and safety (H&S): South African and Tanzanian perspectives. Journal of Engineering, Design and Technology, 4(01), 18–28.

Enshassi, A (1996) Materials control and waste on building sites. Building Research & Information, 24(01), 31–4.

Enshassi, A and Burgess, R (1991) Managerial effectiveness and the style of management in the Middle East: an empirical analysis. Construction Management and Economics, 9(01), 79-92.

Enshassi, A, Al-Swaity, E, Abdul Aziz, A R and Choudhry, R (2018) Coping behaviors to deal with stress and stressor consequences among construction professionals. Journal of Financial Management of Property and Construction, 23(01), 40–56.

Enshassi, A, Arain, F and Tayeh, B (2012) Major causes of problems between contractors and subcontractors in the Gaza Strip. Journal of Financial Management of Property and Construction, 17(01), 92-112.

Enshassi, A, Ayash, A and Mohamed, S (2018) Key barriers to the implementation of energy-management strategies in building construction projects. International Journal of Building Pathology and Adaptation, 36(01), 15–40.

Enshassi, A, Aziz, A R A and Karriri, A a E (2008) Investigating the overhead costs in construction projects in Palestine. Journal of Financial Management of Property and Construction, 13(01), 35–47.

Enshassi, A, Mohamed, S and El-Ghandour, S (2009) Problems associated with the process of claim management in Palestine: Contractors' perspective. Engineering, Construction and Architectural Management, 16(01), 61–72.

Eom, C S and Paek, J H (2009) Risk Index Model for Minimizing Environmental Disputes in Construction. Journal of Construction Engineering and Management, 135(01), 34–41.

Erişen, S (2021) Incremental transformation of spatial intelligence from smart systems to sensorial infrastructures. Building Research & Information, 49(01), 113–26.

Eriksson, P E, Olander, S, Szentes, H and Widen, K (2014) Managing short-term efficiency and long-term development through industrialized construction. Construction Management and Economics, 32(01), 97-108.

Erkoreka, A, Flores-Abascal, I, Escudero, C, Martin, K, Millan, J A and Sala, J M (2019) Flat roof hygrothermal performance testing and evaluation. International Journal of Building Pathology and Adaptation, 38(01), 148–75.

Ernstsen, S N, Whyte, J, Thuesen, C and Maier, A (2021) How Innovation Champions Frame the Future: Three Visions for Digital Transformation of Construction. Journal of Construction Engineering and Management, 147(01).

Ernzen, J J and Schexnayder, C (2000) One Company's Experience with Design/Build: Labor Cost Risk and Profit Potential. Journal of Construction Engineering and Management, 126(01), 10–14.

Ershadi, M J, Edrisabadi, R and Shakouri, A (2019) Strategic alignment of project management with health, safety and environmental management. Built Environment Project and Asset Management, 10(01), 78–93.

Ershadi, M, Jefferies, M, Davis, P and Mojtahedi, M (2021) Achieving sustainable procurement in construction projects: The pivotal role of a project management office. Construction Economics and Building, 21(01), 45-64.

Evans, R C and Kaka, A P (1998) Analysis of the accuracy of standard/average value curves using food retail building projects as case studies. Engineering, Construction and Architectural Management, 5(01), 58–67.

Evans, S, Godoy-Shimizu, D, Steadman, P, Amrith, S, Humphrey, D and Ruyssevelt, P (0) Getting to net zero: Islington’s social housing stock. Buildings and Cities, 4(01), 524–44.

Everett, J G and Farghal, S H (1997) Data Representation for Predicting Performance with Learning Curves. Journal of Construction Engineering and Management, 123(01), 46–52.

Everett, J G and Slocum, A H (1993) CRANIUM: Device for Improving Crane Productivity and Safety. Journal of Construction Engineering and Management, 119(01), 23–39.

Everett, J G and Thompson, W S (1995) Experience Modification Rating for Workers' Compensation Insurance. Journal of Construction Engineering and Management, 121(01), 66–79.

Ewart, K, Shields, T J and Silcock, G W (1987) An analysis of the cost of compliance with the Fire Service Order, Northern Ireland, 1985. Construction Management and Economics, 5(01), 3-12.

Ewenstein, B and Whyte, J K (2007) Visual representations as ‘artefacts of knowing’. Building Research & Information, 35(01), 81–9.

Eyiah-Botwe, E, Aigbavboa, C O and Thwala, W D (2019) Curbing PPP construction projects’ failure using enhanced stakeholder management success in developing countries. Built Environment Project and Asset Management, 10(01), 50–63.

Eyre, N, Fawcett, T, Topouzi, M, Killip, G, Oreszczyn, T, Jenkinson, K and Rosenow, J (0) Fabric first: is it still the right approach?. Buildings and Cities, 4(01), 965–72.

Ezeldin, A S and Soliman, A (2009) Hybrid Time-Cost Optimization of Nonserial Repetitive Construction Projects. Journal of Construction Engineering and Management, 135(01), 42–55.

Fadeyi, M O (2012) Compromise between ventilation, filtration strategies and recirculation rates for the design and operation of air-conditioned facilities in the tropics. Architectural Engineering and Design Management, 8(01), 6-20.

Fageha, M K and Aibinu, A A (2016) Identifying stakeholders’ involvement that enhances project scope definition completeness in Saudi Arabian public building projects. Built Environment Project and Asset Management, 6(01), 6-29.

Fan, L, Ho, C and Ng, V C-W (2001) A study of quantity surveyors' ethical behaviour. Construction Management and Economics, 19(01), 19-36.

Fan, S and Tserng, H P (2006) Object-Oriented Scheduling for Repetitive Projects with Soft Logics. Journal of Construction Engineering and Management, 132(01), 35–48.

Fan, Y and Kokko, E (1997) Three-dimensional gaseous transfer within cellular plastic insulation and its consequences. Building Research & Information, 25(01), 25–35.

Faraj, I (2003) Geometric verification of design. Engineering, Construction and Architectural Management, 10(01), 56–70.

Faraj, I (2001) Verification and spatial clearance of features in a product modelling environment. Construction Innovation, 1(01), 55–74.

Farghal, S H and Everett, J G (1997) Learning Curves: Accuracy in Predicting Future Performance. Journal of Construction Engineering and Management, 123(01), 41–45.

Farid, F, Boyer, L T and Kangari, R (1989) Required Return on Investments in Construction. Journal of Construction Engineering and Management, 115(01), 109–25.

Farran, M and Zayed, T (2012) New life-cycle costing approach for infrastructure rehabilitation. Engineering, Construction and Architectural Management, 19(01), 40–60.

Farrell, M L (1996) Real property valuation in a context of Knight-Keynes uncertainty. Journal of Financial Management of Property and Construction, 1(01), 5–20.

Farrell, P and Gale, A (2000) The site manager: role, education and training in the UK. Journal of Construction Research, 1(01), 43–52.

Fawcett, T and Topouzi, M (2020) Residential retrofit in the climate emergency: the role of metrics. Buildings and Cities, 1(01), 475–90.

Fay, R, Treloar, G and Iyer-Raniga, U (2000) Life-cycle energy analysis of buildings: a case study. Building Research & Information, 28(01), 31–41.

Fayazi, M (2011) Reconstruction projects by using core housing method in Iran: Case study: Gilan Province experience. International Journal of Disaster Resilience in the Built Environment, 2(01), 74–85.

Fayek, A (1998) Competitive Bidding Strategy Model and Software System for Bid Preparation. Journal of Construction Engineering and Management, 124(01), 1–10.

Federle, M O, Rowings, J E and DeVany, T S (1993) Model of Career Choice for Craftworkers. Journal of Construction Engineering and Management, 119(01), 105–14.

Fellows, R (2010) New research paradigms in the built environment. Construction Innovation, 10(01), 5–13.

Fellows, R F (1993) Competitive advantage in construction: comment. Construction Management and Economics, 11(01), 71-2.

Ferguson, L, Taylor, J, Zhou, K, Shrubsole, C, Symonds, P, Davies, M and Dimitroulopoulou, S (2021) Systemic inequalities in indoor air pollution exposure in London, UK. Buildings and Cities, 2(01), 425–48.

Feriadi, H, Hien, N, Chandra, S and Cheong, K W (2003) Adaptive behaviour and thermal comfort in Singapore's naturally ventilated housing. Building Research & Information, 31(01), 13–23.

Fernández González, J and Gongal, A (2021) Unidirectional pedestrian circulation: physical distancing in informal settlements. Buildings and Cities, 2(01), 655–65.

Fernandez-Lopez X and Coto-Millan, P (2015) From the boom to the collapse: a technical efficiency analysis of the Spanish construction industry during the financial crisis. Construction Economics and Building, 15(01), 104-117.

Fernandez-Solis, J L (2013) Building construction: A deterministic non-periodic flow: A case study of chaos theories in tracking production flow. Architectural Engineering and Design Management, 9(01), 21-48.

Fernández-Solís, J L (2008) The systemic nature of the construction industry. Architectural Engineering and Design Management, 4(01), 31–46.

Fernando, N G, Amaratunga, D and Haigh, R (2014) The career advancement of the professional women in the UK construction industry: The career success factors. Journal of Engineering, Design and Technology, 12(01), 53-70.

Fettermann, D C, Borriello, A, Pellegrini, A, Cavalcante, C G, Rose, J M and Burke, P F (2021) Getting smarter about household energy: the who and what of demand for smart meters. Building Research & Information, 49(01), 100–12.

Few, J, Shipworth, M and Elwell, C (0) Ventilation regulations and occupant practices: undetectable pollution and invisible extraction. Buildings and Cities, 5(01), 16–34.

Fielden, S L, Davidson, M J, Gale, A W and Davey, C L (2000) Women in construction: the untapped resource. Construction Management and Economics, 18(01), 113-21.

Finch, E F (1992) Environmental assessment of construction projects. Construction Management and Economics, 10(01), 5-18.

Finnie, D (2013) Comparison of time adjustment clauses between DZ3910, AS4000 and STCC. Construction Economics and Building, 13(01), 66-84.

Finnie, D (2012) Contract delay: what is it and how are we performing?. Construction Economics and Building, 12(01), 83-91.

Firmenich, J (2017) Customisable framework for project risk management. Construction Innovation, 17(01), 68-89.

Firth, S K, Lomas, K J and Wright, A J (2010) Targeting household energy-efficiency measures using sensitivity analysis. Building Research & Information, 38(01), 25–41.

Fisher, D J and Rajan, N (1996) Automated Constructibility Analysis of Work-Zone Traffic-Control Planning. Journal of Construction Engineering and Management, 122(01), 36–43.

Fisher, D J, O'Neill, M W and Contreras, J C (1995) DS^2: Drilled Shaft Decision Support System. Journal of Construction Engineering and Management, 121(01), 86–94.

Flood, C and Scott, L (2019) Thermal analysis and post construction verification. International Journal of Building Pathology and Adaptation, 38(01), 51–67.

Flood, I and Issa, R R A (2010) Empirical Modeling Methodologies for Construction. Journal of Construction Engineering and Management, 136(01), 36–48.

Flyen, C, Hauge , Å L, Almås, A-J and Godbolt , Å L (2018) Municipal collaborative planning boosting climate resilience in the built environment. International Journal of Disaster Resilience in the Built Environment, 9(01), 58-69.

Flynn, M A and Sampson, J M (2012) Trench Safety–Using a Qualitative Approach to Understand Barriers and Develop Strategies to Improve Trenching Practices. International Journal of Construction Education and Research, 8(01), 63–79.

Fo, S, Marsh, x and Cockerham, G (2003) Assessing the capability of construction processes to realize building designs. Construction Management and Economics, 21(01), 7-10.

Fogleman, V (2014) The contaminated land regime: time for a regime that is fit for purpose (Part 1). International Journal of Law in the Built Environment, 6(01), 43-68.

Fogleman, V (2014) The contaminated land regime: time for a regime that is fit for purpose (Part 2). International Journal of Law in the Built Environment, 6(01), 129-51.

Ford, B, Mumovic, D and Rawal, R (2022) Alternatives to air-conditioning: policies, design, technologies, behaviours. Buildings and Cities, 3(01), 433–47.

Ford, D N (2002) Achieving Multiple Project Objectives through Contingency Management. Journal of Construction Engineering and Management, 128(01), 30–39.

Ford, D N, Anderson, S D, Damron, A J, de Las Casas, R, Gokmen, N and Kuennen, S T (2004) Managing Constructibility Reviews to Reduce Highway Project Durations. Journal of Construction Engineering and Management, 130(01), 33–42.

Fore, S and Mbohwa, C (2015) Greening manufacturing practices in a continuous process industry: Case study of a cement manufacturing company. Journal of Engineering, Design and Technology, 13(01), 94-122.

Formoso, C T, Santos, A D and Powell, J A (2002) An exploratory study on the applicability of process transparency in construction sites. Journal of Construction Research, 3(01), 35–54.

Forsythe, P (2011) Drivers of housing demolition decision making and the impact on timber waste management. Construction Economics and Building, 11(01), 1-14.

Forsythe, P (2015) Monitoring customer perceived service quality and satisfaction during the construction process. Construction Economics and Building, 15(01), 19-42.

Fortune, C and Birnie, J (2000) Money illusions and the judgements of professional quanitity surveyors. Journal of Financial Management of Property and Construction, 5(01), 41–50.

Fortune, C and Hinks, J (1998) Strategic building project price forecasting models in use - paradigm shift postponed. Journal of Financial Management of Property and Construction, 3(01), 5–26.

Fortune, C and Skitmore, M R (1994) Quantification skills in the construction industry. Construction Management and Economics, 12(01), 79-88.

Foth, M (2018) Participatory urban informatics: towards citizen-ability. Smart and Sustainable Built Environment, 7(01), 4–19.

Fox, S J (2010) Information and communication design for multi-disciplinary multi-national education and research. International Journal of Construction Education and Research, 6(01), 45.

Francart, N, Höjer, M, Mjörnell, K, Orahim, A S, von Platten, J and Malmqvist, T (2020) Sharing indoor space: stakeholders’ perspectives and energy metrics. Buildings and Cities, 1(01), 70–85.

Frances, Z and Stevenson, F (2018) Domestic photovoltaic systems: the governance of occupant use. Building Research & Information, 46(01), 23–41.

Francis, A (2017) Simulating Uncertainties in Construction Projects with Chronographical Scheduling Logic. Journal of Construction Engineering and Management, 143(01).

Francis, A and Skitmore, M (2005) Risk Management within the electrical distribution supply industry in South East Queensland. Journal of Financial Management of Property and Construction, 10(01), 45–54.

Francis, V (2004) Supportive organisational cultures and their effect on male civil engineers. Construction Economics and Building, 4(01), 1-10.

Francis, V and Lingard, H (2002) The case for family-friendly work practices in the Australian construction industry. Construction Economics and Building, 2(01), 28-36.

Francis, V and Prosser, A (2014) Exploring Vocational Guidance and Gender in Construction. International Journal of Construction Education and Research, 10(01), 39-57.

Franz, B, Leicht, R, Molenaar, K and Messner, J (2017) Impact of Team Integration and Group Cohesion on Project Delivery Performance. Journal of Construction Engineering and Management, 143(01).

Fraser, C (2000) The influence of personal characteristics on effectiveness of construction site managers. Construction Management and Economics, 18(01), 29-36.

Friedman, A and Cammalleri, V (1996) The impact of R-2000 building technology on Canadian housing. Building Research & Information, 24(01), 5–13.

Friedrich, D (2022) Consumer and expert behaviour towards biobased wood-polymer building products: a comparative multi-factorial study according to theory of planned behaviour. Architectural Engineering and Design Management, 18(01), 73–92.

Friend, R M, Thinphanga, P, MacClune, K, Henceroth, J, Tran, P V G and Nghiem, T P (2015) Urban transformations and changing patterns of local risk: lessons from the Mekong Region. International Journal of Disaster Resilience in the Built Environment, 6(01), 30-43.

Frischknecht, R, Alig, M, Nathani, C, Hellmüller, P and Stolz, P (2020) Carbon footprints and reduction requirements: the Swiss real estate sector. Buildings and Cities, 1(01), 325–36.

Frödell, M, Josephson, P-E and Lindahl, G (2008) Swedish construction clients' views on project success and measuring performance. Journal of Engineering, Design and Technology, 6(01), 21–32.

Fu, C, Kaya, S and Aouad, M K G (2007) The development of an IFC-based lifecycle costing prototype tool for building construction and maintenance: Integrating lifecycle costing to nD modelling. Construction Innovation, 7(01), 85–98.

Fu, Y and Zhu, J (2021) Trusted data infrastructure for smart cities: a blockchain perspective. Building Research & Information, 49(01), 21–37.

Fuentes, M E (2019) Co-creation and co-destruction of experiential value: a service perspective in projects. Built Environment Project and Asset Management, 9(01), 100–17.

Fugar, F Agyakwah-Baah, A (2010) Delays in building construction projects in Ghana. Construction Economics and Building, 10(01), 103-116.

Fuller, R J and Luther, M B (2003) Simulation of condensation problems in a roller skating centre. Building Research & Information, 31(01), 48–59.

Göswein, V, Arehart, J, Phan-huy, C, Pomponi, F and Habert, G (2022) Barriers and opportunities of fast-growing biobased material use in buildings. Buildings and Cities, 3(01), 745–55.

Gamal, A, Nashaat, B, Shahda, M M and Nosier, S R (2024) Ten questions concerning the integration of digital fabrication techniques into the architectural design process. Architectural Engineering and Design Management, 20(01), 120–49.

Gambatese, J A (2003) Controlled Concrete Demolition Using Expansive Cracking Agents. Journal of Construction Engineering and Management, 129(01), 98–104.

Gambatese, J A and James, D E (2001) Dust Suppression Using Truck-Mounted Water Spray System. Journal of Construction Engineering and Management, 127(01), 53–59.

Gambatese, J A, Pestana, C and Lee, H W (2017) Alignment between Lean Principles and Practices and Worker Safety Behavior. Journal of Construction Engineering and Management, 143(01).

Gambo, N, Musonda, I and Zadawa, A N (2023) Effects of Social Media Learning Environments on AEC Learning Process among University Students in Nigeria. International Journal of Construction Education and Research, 19(01), 99–127.

Gambo, N, Said, I and Ismail, R (2017) Mediation model for improving cost factors that affect performance of small-scale building construction contract business in Nigeria: A PLS-SEM approach. International Journal of Construction Education and Research, 13(01), 24-46.

Gann, D M and Barlow, J (1996) Flexibility in building use: the technical feasibility of converting redundant offices into flats. Construction Management and Economics, 14(01), 55-66.

Gao, H, Zhong, B, Luo, H and Chen, W (2022) Computational Geometric Approach for BIM Semantic Enrichment to Support Automated Underground Garage Compliance Checking. Journal of Construction Engineering and Management, 148(01).

Garas, F and Hunter, I (1999) The eLSEwise initiative. Engineering, Construction and Architectural Management, 6(01), 6–3.

Garnett, N and Pickrell, S (2000) Benchmarking for construction: theory and practice. Construction Management and Economics, 18(01), 55-63.

Garsden, B R (1995) Postconstruction Evaluation. Journal of Construction Engineering and Management, 121(01), 37–42.

Gary, D H and David, J E (2012) Innovation or business survival? A preliminary, qualitative study of UK construction plant supply chains. Construction Innovation, 12(01), 7–.

Gaspar, P L and Brito, J D (2008) Service life estimation of cement-rendered facades. Building Research & Information, 36(01), 44–55.

Gatti, M P (2018) Maintenance, reconstruction and prevention for the regeneration of historic towns and centers. International Journal of Disaster Resilience in the Built Environment, 9(01), 96-111.

Georges, L, Haase, M, Houlihan Wiberg, A, Kristjansdottir, T and Risholt, B (2015) Life cycle emissions analysis of two nZEB concepts. Building Research & Information, 43(01), 82-93.

Georgiou, A, Haritos, G, Fowler, M and Imani, Y (2016) Advanced phase powertrain design attribute and technology value mapping. Journal of Engineering, Design and Technology, 14(01), 115-33.

Georgy, M and Basily, S Y (2008) Using genetic algorithms in optimizing construction material delivery schedules. Construction Innovation, 8(01), 23–45.

Gerbov, A, Singh, V and Herva, M (2018) Challenges in applying design research studies to assess benefits of BIM in infrastructure projects: Reflections from Finnish case studies. Engineering, Construction and Architectural Management, 25(01), 2-20.

Gerges, M, Mayouf, M, Rumley, P and Moore, D (2017) Human behaviour under fire situations in high-rise residential building. International Journal of Building Pathology and Adaptation, 35(01), 90–106.

Gerhardsson, K M and Laike, T (2021) Windows: a study of residents’ perceptions and uses in Sweden. Buildings and Cities, 2(01), 467–86.

Gharehbaghi, K and McManus, K (2019) TIS condition monitoring using ANN integration: an overview. Journal of Engineering, Design and Technology, 17(01), 204–17.

Ghiasi, V, Omar, H, Huat, B B K, Muniandi, R and Yusof, Z B M (2011) Risk management overview of tunnels using numerical modelling. Journal of Engineering, Design and Technology, 9(01), 110–24.

Ghoddousi, P, Bahrami, N, Chileshe, N and Hosseini, M R (2014) Mapping site-based construction workers’ motivation: expectancy theory approach. Construction Economics and Building, 14(01), 60-77.

Gholami, M, Mofidi Shemirani, M and Fayaz, R (2018) A modelling methodology for a solar energy-efficient neighbourhood. Smart and Sustainable Built Environment, 7(01), 117–32.

Gibb, A G F and Isack, F (2001) Client drivers for construction projects: implications for standardization. Engineering, Construction and Architectural Management, 8(01), 46–58.

Gibb, A, Hide, S, Haslam, R, Gyi, D, Pavitt, T, Atkinson, S and Duff, R (2005) Construction tools and equipment – their influence on accident causality. Journal of Engineering, Design and Technology, 3(01), 12–23.

Gibb, A, Hide, S, Haslam, R, Gyi, D, Pavitt, T, Atkinson, S and Duff, R (2005) Construction tools and equipment ? their influence on accident causality. Journal of Engineering, Design and Technology, 3(01), 12–23.

Gibberd, J (2015) Measuring capability for sustainability: the Built Environment Sustainability Tool (BEST). Building Research & Information, 43(01), 49-61.

Gibbons, T (2013) Management agreements in multi-unit housing developments: Existing models and the New Zealand Unit Titles Acts. International Journal of Law in the Built Environment, 5(01), 40-52.

Gibson, G E and Bell, L C (1992) Integrated Data‐Base Systems. Journal of Construction Engineering and Management, 118(01), 50–59.

Gibson, G E and Whittington, D A (2010) Charrettes as a Method for Engaging Industry in Best Practices Research. Journal of Construction Engineering and Management, 136(01), 66–75.

Gichunge, H K, Masu, S M and Akumu, O A K (2010) Factor cost indices practices in the building industry for Nairobi, Kenya. Journal of Financial Management of Property and Construction, 15(01), 61–70.

Gidado, K (2004) Enhancing the prime contractor's pre-construction planning. Journal of Construction Research, 5(01), 87–106.

Giddings, B and Rogerson, R (2021) Compacting the city centre: densification in two Newcastles. Buildings and Cities, 2(01), 185–202.

Gilani, G, Pons, O and de la Fuente, A (2022) Sustainability-Oriented Approach to Assist Decision Makers in Building Facade Management. Journal of Construction Engineering and Management, 148(01).

Gilbert, G L and Walker, D H T (2001) Motivation of Australian white-collar construction employees: a gender issue?. Engineering, Construction and Architectural Management, 8(01), 59–66.

Gill, G N (2014) Environmental protection and developmental interests: A case study of the River Yamuna and the Commonwealth Games, Delhi, 2010. International Journal of Law in the Built Environment, 6(01), 69-90.

Glass, J (2012) The state of sustainability reporting in the construction sector. Smart and Sustainable Built Environment, 1(01), 87-104.

Glass, J (2012) The state of sustainability reporting in the construction sector. Smart and Sustainable Built Environment, 1(01), 87-104.

Glass, J and Baiche, B (2001) Perceptions of hybrid concrete construction in the UK construction industry. Engineering, Construction and Architectural Management, 8(01), 67–77.

Glavan, J R and Tucker, R L (1991) Forecasting Design‐Related Problems—Case Study. Journal of Construction Engineering and Management, 117(01), 47–65.

Glick, S, Folkestad, J and Banning, J (2016) Construction management dissertation abstracts: A bounded qualitative meta-study. International Journal of Construction Education and Research, 12(01), 54-65.

Glick, S, Guggemos, A A and Price, J (2011) Increasing resource efficiency through residential greywater use. International Journal of Construction Education and Research, 7(01), 41–57.

Glick, S, Porter, D and Smith, C (2012) Student Visualization: Using 3-D Models in Undergraduate Construction Management Education. International Journal of Construction Education and Research, 8(01), 26–46.

Godbolt, Å L, Flyen, C, Hauge, Å L, Flyen, A-C and Moen, L L (2018) Future resilience of cultural heritage buildings: how do residents make sense of public authorities’ sustainability measures?. International Journal of Disaster Resilience in the Built Environment, 9(01), 18-30.

Godoy-Shimizu, D, Hong, S M, Korolija, I, Schwartz, Y, Mavrogianni, A and Mumovic, D (2022) Pathways to improving the school stock of England towards net zero. Buildings and Cities, 3(01), 939–63.

Godoy-Shimizu, D, Steadman, P and Evans, S (2021) Density and morphology: from the building scale to the city scale. Buildings and Cities, 2(01), 92–113.

Goedert, J D, Foster, E T, Jewell, J and Bartek, J (2009) Automated tool tracking on the construction site. International Journal of Construction Education and Research, 5(01), 12-23.

Goel, A (2019) Sustainability in construction and built environment: a “wicked problem”?. Smart and Sustainable Built Environment, 8(01), 2–15.

Goh, B-H (1996) Residential construction demand forecasting using economic indicators: a comparative study of artificial neural networks and multiple regression. Construction Management and Economics, 14(01), 25-34.

Goh, Y M (2015) Empirical Investigation of the Average Deployment Force of Personal Fall-Arrest Energy Absorbers. Journal of Construction Engineering and Management, 141(01).

Gohil, U, Carrillo, P, Ruikar, K and Anumba, C (2011) Value-enhanced collaborative working: case study of a small management advisory firm. Construction Innovation, 11(01), 43–60.

Gokarakonda, S, Shrestha, S, Caleb, P R, Rathi, V, Jain, R, Thomas, S, Topp, K and Niazi, Z (2019) Decoupling in India’s building construction sector: trends, technologies and policies. Building Research & Information, 47(01), 91–107.

Goldenberg, M and Shapira, A (2007) Systematic Evaluation of Construction Equipment Alternatives: Case Study. Journal of Construction Engineering and Management, 133(01), 72–85.

Goldsmith, W and Flanagan, T (2017) Value methodology – case studies within climate resilience and sustainability policy application. Architectural Engineering and Design Management, 13(01), 3–21.

Goncalves, V L, Costanzo, V, Fabbri, K and Rakha, T (2022) Overheating assessment in Passivhaus dwellings: the influence of prediction tools. Buildings and Cities, 3(01), 153–67.

Goncikowski, M (2024) Research by design – determining the form of the initial architectural concept of a skyscraper building in Warsaw. Architectural Engineering and Design Management, 20(01), 1–31.

Gondia, A, Siam, A, El-Dakhakhni, W and Nassar, A H (2020) Machine Learning Algorithms for Construction Projects Delay Risk Prediction. Journal of Construction Engineering and Management, 146(01).

González, P, González, V, Molenaar, K and Orozco, F (2014) Analysis of Causes of Delay and Time Performance in Construction Projects. Journal of Construction Engineering and Management, 140(01).

Goodchild, B and Beatty, C (2000) Assessing the procurement practices of housing associations: a case study of new build in Scotland. Journal of Construction Procurement, 6(01), 20–32.

Goodess, C, Berk, S, Ratna, S B, Brousse, O, Davies, M, Heaviside, C, Moore, G and Pineo, H (2021) Climate change projections for sustainable and healthy cities. Buildings and Cities, 2(01), 812–36.

Goodrum, P M and Haas, C T (2004) Long-Term Impact of Equipment Technology on Labor Productivity in the U.S. Construction Industry at the Activity Level. Journal of Construction Engineering and Management, 130(01), 124–33.

Gordon, C M (1994) Choosing Appropriate Construction Contracting Method. Journal of Construction Engineering and Management, 120(01), 196–210.

Gori, V, Marincioni, V and Altamirano-Medina, H (2021) Retrofitting traditional buildings: a risk-management framework integrating energy and moisture. Buildings and Cities, 2(01), 411–24.

Gosling, J, Naim, M and Towill, D (2013) Identifying and Categorizing the Sources of Uncertainty in Construction Supply Chains. Journal of Construction Engineering and Management, 139(01), 102–10.

Gottsche, J, Kelly, M and Taggart, M (2016) Assessing the impact of energy management initiatives on the energy usage during the construction phase of an educational building project in Ireland. Construction Management and Economics, 34(01), 46-60.

Goubran, S, Masson, T and Walker, T (2020) Diagnosing the local suitability of high-rise timber construction. Building Research & Information, 48(01), 101–23.

Goulding, J S, Ezcan, V and Sutrisna, M (2018) Securing the embeddedness of psychosocial diffusion indicators into the Turkish construction industry. Journal of Financial Management of Property and Construction, 23(01), 90–111.

Gounden, S (1996) Reconstruction and development in South Africa: the construction industry and related procurement reform. Journal of Construction Procurement, 2(01), 3–10.

Gowri, K and Depanni, S (1998) The Health and Safety Expert System (HASES): an expert system framework for building inspections. Engineering, Construction and Architectural Management, 5(01), 92–102.

Goyal, P K, Datta, T K and Vijay, V K (2012) Vulnerability of rural houses to cyclonic wind. International Journal of Disaster Resilience in the Built Environment, 3(01), 20-41.

Graham, L t, parkinson, T and schiavon, S (2021) Lessons learned from 20 years of CBE’s occupant surveys. Buildings and Cities, 2(01), 166–84.

Graham, P and Rawal, R (2019) Achieving the 2°C goal: the potential of India’s building sector. Building Research & Information, 47(01), 108–22.

Graham, P M and Walker, D H T (2000) First Steps Towards Acheiving Environmental Sustainability for Developed Projects - An Holistic Life-Cycle Procurement Objective. Journal of Construction Procurement, 6(01), 67–84.

Gram-Hanssen, K (2014) New needs for better understanding of household's energy consumption ? behaviour, lifestyle or practices?. Architectural Engineering and Design Management, 10(01), 91-107.

Gram-Hanssen, K and Georg, S (2018) Energy performance gaps: promises, people, practices. Building Research & Information, 46(01), 1–9.

Gransberg, D D (2010) Quantifying the impact of peer evaluations on student team project grading. International Journal of Construction Education and Research, 6(01), 17.

Grant, A and Hinze, J (2013) Underlying causal factors associated with construction worker fatalities involving stepladders. Construction Economics and Building, 13(01), 13-22.

Grant, E J (2020) Mainstreaming environmental education for architects: the need for basic literacies. Buildings and Cities, 1(01), 538–49.

Grassie, D, Schwartz, Y, Symonds, P, Korolija, I, Mavrogianni, A and Mumovic, D (2022) Energy retrofit and passive cooling: overheating and air quality in primary schools. Buildings and Cities, 3(01), 204–25.

Gray, C and Al-Bizri, S (2007) Modelling trade contractor information production. Architectural Engineering and Design Management, 3(01), 39–48.

Green, E, Lannon, S, Patterson, J, Variale, F and Iorwerth, H (2020) Decarbonising the Welsh housing stock: from practice to policy. Buildings and Cities, 1(01), 277–92.

Green, S D (2022) Modern methods of construction: reflections on the current research agenda. Buildings and Cities, 3(01), 653–62.

Green, S D (1989) Tendering: optimization and rationality. Construction Management and Economics, 7(01), 52-63.

Green, S D (2002) The human resource management implications of lean construction: critical perspectives and conceptual chasms. Journal of Construction Research, 3(01), 147–65.

Green, S D and Sergeeva, N (2020) The contested privileging of zero carbon: plausibility, persuasiveness and professionalism. Buildings and Cities, 1(01), 491–503.

Green, S D and Simister, S J (1999) Modelling client business processes as an aid to strategic briefing. Construction Management and Economics, 17(01), 63-76.

Green, S D, Kao, C and Larsen, G D (2010) Contextualist Research: Iterating between Methods While Following an Empirically Grounded Approach. Journal of Construction Engineering and Management, 136(01), 117–26.

Green, S D, Larsen, G D and Kao, C-C (2008) Competitive strategy revisited: contested concepts and dynamic capabilities. Construction Management and Economics, 26(01), 63–78.

Greenwood, D J (2001) Subcontractor procurement: are relationships changing?. Construction Management and Economics, 19(01), 5-7.

Greenwood, D J and Yates, D J (2006) The determinants of successful partnering: a transaction cost perspective. Journal of Construction Procurement, 12(01).

Greenwood, J (2007) An examination of the performance based building code on the design of a commercial building. Construction Economics and Building, 7(01), 37-44.

Gremyr, I, Bäckstrand, J, Fredriksson, A, Gatenholm, G and Halldórsson, & (2023) Blueprinting construction logistics services for quality improvement. Construction Management and Economics, 41(01), 60–78.

Grenzfurtner, W and Gronalt, M (2021) Continuous improvement of the industrialised housebuilding order fulfilment process. Construction Innovation, 21(01), 22–39.

Gribble, S J, Scott, D, Mawdesley, M and Al-Jibouri, S (2006) Learning to be real engineers. Architectural Engineering and Design Management, 2(01), 101–14.

Griffis, F H (1992) Bidding Strategy: Winning over Key Competitors. Journal of Construction Engineering and Management, 118(01), 151–65.

Griffis, F H & and Butler, F M (1988) Case for Cost‐Plus Contracting. Journal of Construction Engineering and Management, 114(01), 83–94.

Griffith, A (1995) The current status of environmental management systems in construction. Engineering, Construction and Architectural Management, 2(01), 5–16.

Griffith, A, King, A and Knight, A (2003) Examining the dynamics of novation from the principal contractor's and architect's perspectives. Construction Economics and Building, 3(01), 13-18.

Grilo, L, Melhado, S, Silva, S A R, Edwards, P and Hardcastle, C (2007) International building design management and project performance: case study in São Paulo, Brazil. Architectural Engineering and Design Management, 3(01).

Grimm, C T (1988) Brick Masonry Workmanship Statistics. Journal of Construction Engineering and Management, 114(01), 147–9.

Grimm, C T (1994) Void Mortar Joints: Bane of Brick Masonry. Journal of Construction Engineering and Management, 120(01), 152–61.

Grosskopf, K R (2004) Teaching methods improvement using industry focus groups: a case study in construction financing. International Journal of Construction Education and Research, 1(01), 13–25.

Grosskopf, K R, Celik, B, Song, C and Oppenheim, P (2007) QA/QC software to mitigate mould and other indoor air quality (IAQ) hazards in construction. International Journal of Construction Education and Research, 3(01), 35–50.

Grove, E, Dainty, A, Thomson, D and Thorpe, T (2018) Becoming collaborative: a study of intra-organisational relational dynamics. Journal of Financial Management of Property and Construction, 23(01), 6–23.

Guan, L (2009) Implication of global warming on air-conditioned office buildings in Australia. Building Research & Information, 37(01), 43–54.

Gudem, M, Steinert, M, Welo, T and Leifer, L (2013) Redefining customer value in lean product development design projects. Journal of Engineering, Design and Technology, 11(01), 71-89.

Gull, I (2011) Testing of Strength of Recycled Waste Concrete and Its Applicability. Journal of Construction Engineering and Management, 137(01), 1–5.

Gullette, G, Thebpanya, P and Singto, S (2022) Socioeconomic and livelihood impacts within Bangkok’s expanding metropolitan region. Buildings and Cities, 3(01), 808–23.

Gunawardena, K and Steemers, K (2023) Assessing the influence of neighbourhood-scale vertical greening application. Buildings and Cities, 4(01), 103–23.

Gunderson, D E and Moore, J D (2008) Group learning pedagogy and group selection. International Journal of Construction Education and Research, 4(01), 34-45.

Gundes, S (2011) Exploring the dynamics of the Turkish construction industry using input-output analysis. Construction Management and Economics, 29(01), 59–68.

Gunning, J G (1999) A review of the application of risk assessment procedures in construction management and research. Journal of Financial Management of Property and Construction, 4(01), 59–74.

Gunning, J G (1997) The costs and benefits of achieving business excellence in construction organisations. Journal of Financial Management of Property and Construction, 2(01), 45–58.

Guo, F, Jahren, C T and Turkan, Y (2021) Electronic Document Management Systems for the Transportation Construction Industry. International Journal of Construction Education and Research, 17(01), 52–67.

Guo, Q, Amin, S, Wang, H and Yan, H (2024) Coupling Simulation of Human-Environmental Safety Risk Factors in Metro Construction – a Case Study of Rongjiazhai Station at Xi’an Metro Line 5 in China. International Journal of Construction Education and Research, 20(01), 26–42.

Gupta, R, Barnfield, L and Gregg, M (2017) Overheating in care settings: Magnitude, causes, preparedness and remedies. Building Research & Information, 45(01), 83-101.

Gupta, R, Gregg, M and Cherian, R (2019) Developing a new framework to bring consistency and flexibility in evaluating actual building performance. International Journal of Building Pathology and Adaptation, 38(01), 228–55.

Gupta, R, Gregg, M, Manu, S, Vaidya, P and Dixit, M (2019) Customized performance evaluation approach for Indian green buildings. Building Research & Information, 47(01), 56–74.

Gurmu, A, Galluzzo, A and Kite, J (2021) Modelling customers’ perception of the quality of services provided by builders: A case of Victoria, Australia. Construction Economics and Building, 21(01), 100-24.

Gurung, N and Mahendran, M (2002) Comparative life cycle costs for new steel portal frame building systems. Building Research & Information, 30(01), 35–46.

Guven, G and Ergen, E (2013) Factors affecting the selection of data storage approach in radio frequency identification applications. Construction Innovation, 13(01), 117-38.

Guven, H and Tanik, A (2018) Water-energy nexus. Smart and Sustainable Built Environment, 9(01), 54–70.

Guy, G B and Kibert, C J (1998) Developing indicators of sustainability: US experience. Building Research & Information, 26(01), 39–45.

Guyer, R C and Laman, J A (2012) Short-line railroad management system for bridge prioritization. Built Environment Project and Asset Management, 2(01), 25-40.

Håkansson, H and Ingemansson, M (2013) Industrial renewal within the construction network. Construction Management and Economics, 31(01), 40-61.

Ha, S K, Jang, J G, Park, S H and Lee, H K (2015) Advanced Spray Multiple Layup Process for Quality Control of Sprayed FRP Composites Used to Retrofit Concrete Structures. Journal of Construction Engineering and Management, 141(01).

Haas, C and Einstein, H H (2002) Updating the Decision Aids for Tunneling. Journal of Construction Engineering and Management, 128(01), 40–48.

Habert, G, Röck, M, Steininger, K, Lupísek, A, Birgisdottir, H, Desing, H, Chandrakumar, C, Pittau, F, Passer, A, Rovers, R, Slavkovic, K, Hollberg, A, Hoxha, E, Jusselme, T, Nault, E, Allacker, K and Lützkendorf, T (2020) Carbon budgets for buildings: harmonising temporal, spatial and sectoral dimensions. Buildings and Cities, 1(01), 429–52.

Habibi, S (2020) A review of ICT-based applications to monitor environmental parameters. Construction Innovation , 20(01), 112–27.

Habisreutinger, P and Gunderson, D E (2006) Real estate reuse opportunities within the regenesis project area: a case study. International Journal of Construction Education and Research, 2(01), 53-63.

Hackett, J A and Hicks, C M (2007) Estimating as a profession in UK construction. Engineering, Construction and Architectural Management, 14(01), 26–51.

Hadipriono, F C and Wang, H (1986) Analysis of Causes of Falsework Failures in Concrete Structures. Journal of Construction Engineering and Management, 112(01), 112–21.

Hadiwattege, C, Senaratne, S, Sandanayake, Y and Fernando, N (2022) Merging Academic Research and Industry Requirements for Innovative Construction Management Practices in Sri Lanka: A Study on Critical Success Factors. International Journal of Construction Education and Research, 18(01), 32–48.

Haeusler, M H, Hespanhol, L and Hoggenmueller, M (2018) ParticipationPlus. Smart and Sustainable Built Environment, 7(01), 133–49.

Haidar, A, Naoum, S, Howes, R and Tah, J (1999) Genetic Algorithms Application and Testing for Equipment Selection. Journal of Construction Engineering and Management, 125(01), 32–38.

Haigh, R and Amaratunga, D (2010) An integrative review of the built environment discipline's role in the development of society's resilience to disasters. International Journal of Disaster Resilience in the Built Environment, 1(01), 11–24.

Hajji, A M and Lewis, P (2013) Development of productivity-based estimating tool for energy and air emissions from earthwork construction activities. Smart and Sustainable Built Environment, 2(01), 84-100.

Halabya, A and El-Rayes, K (2020) Optimizing the Planning of Pedestrian Facilities Upgrade Projects to Maximize Accessibility for People with Disabilities. Journal of Construction Engineering and Management, 146(01).

Haldenwang, R, Slatter, P and Pearce, C (2006) Integration of project management skills to manage a fourth year research project. Journal of Engineering, Design and Technology, 4(01), 60–70.

Halligan, D W, Demsetz, L A, Brown, J D and Pace, C B (1994) Action‐Response Model and Loss of Productivity in Construction. Journal of Construction Engineering and Management, 120(01), 47–64.

Hallowell, M (2010) Cost-effectiveness of construction safety programme elements. Construction Management and Economics, 28(01), 34.

Hallowell, M R and Gambatese, J A (2010) Qualitative Research: Application of the Delphi Method to CEM Research. Journal of Construction Engineering and Management, 136(01), 99–107.

Hallowell, M R, Alexander, D and Gambatese, J A (2017) Energy-based safety risk assessment: Does magnitude and intensity of energy predict injury severity?. Construction Management and Economics, 35(01), 64-77.

Hamid, Z A and Kamar, K A M (2012) Aspects of off-site manufacturing application towards sustainable construction in Malaysia. Construction Innovation, 12(01), 4–10.

Hamidane, H, Ababneh, A, Messabhia, A and Xi, Y (2019) Modeling of chloride penetration in concrete structures under freeze-thaw cycles. International Journal of Building Pathology and Adaptation, 38(01), 127–47.

Hampson, K and Kwok, T (1997) Strategic alliances in building construction: a tender evaluation tool for the public sector. Journal of Construction Procurement, 3(01), 28–41.

Hampton, G, Baldwin, A N and Holt, G (2012) Project delays and cost: stakeholder perceptions of traditional v. PPP procurement. Journal of Financial Management of Property and Construction, 17(01), 73-91.

Hamstead, Z, Coseo, P, AlKhaled, S, Boamah, E F, Hondula, D M, Middel, A and Rajkovich, N (2020) Thermally resilient communities: creating a socio-technical collaborative response to extreme temperatures. Buildings and Cities, 1(01), 218–32.

Han, J, Rapoport, A and Fong, P S (2019) Incentive structures in multi-partner project teams. Engineering, Construction and Architectural Management, 27(01), 49–65.

Han, S, Lee, S and Peña-Mora, F (2012) Identification and Quantification of Non-Value-Adding Effort from Errors and Changes in Design and Construction Projects. Journal of Construction Engineering and Management, 138(01), 98–109.

Han, Y, Feng, Z, Zhang, J, Jin, R and Aboagye-Nimo, E (2019) Employees’ Safety Perceptions of Site Hazard and Accident Scenes. Journal of Construction Engineering and Management, 145(01).

Handa, V K (1996) Construction Engineers Driving into the 21st Century . Journal of Construction Engineering and Management, 122(01), 1–6.

Handa, V K and Abdalla, O (1989) Forecasting productivity by work sampling. Construction Management and Economics, 7(01), 19-28.

Hanna, A S, Camlic, R, Peterson, P A and Nordheim, E V (2002) Quantitative Definition of Projects Impacted by Change Orders. Journal of Construction Engineering and Management, 128(01), 57–64.

Hanna, A S, Chang, C, Lackney, J A and Sullivan, K T (2007) Impact of Overmanning on Mechanical and Sheet Metal Labor Productivity. Journal of Construction Engineering and Management, 133(01), 22–28.

Hanna, A S, Willenbrock, J H and Sanvido, V E (1992) Knowledge Acquisition and Development for Formwork Selection System. Journal of Construction Engineering and Management, 118(01), 179–98.

Hannus, M, Luiten, G T, Watson, A S, Deguine, M, Sauce, G and Rijn, T P J V (1999) ICT tools for improving the competitiveness of the LSE industry. Engineering, Construction and Architectural Management, 6(01), 30–7.

Hansen, A R, Gram-Hanssen, K and Knudsen, H N (2018) How building design and technologies influence heat-related habits. Building Research & Information, 46(01), 83–98.

Hao, J L, Hills, M J and Huang, T (2007) A simulation model using system dynamic method for construction and demolition waste management in Hong Kong. Construction Innovation, 7(01), 7–21.

Hardie, M, Miller, G, Manley, K and McFallan, S (2006) Innovation performance and its impact on profitability among different sectors in the Australian construction Industry. Construction Economics and Building, 6(01), 1-11.

Hardie. M and Saha, S (2009) Builders' perceptions of lowest cost procurement and its impact on quality. Construction Economics and Building, 9(01), 1-8.

Hargreaves, T, Wilson, C and Hauxwell-Baldwin, R (2018) Learning to live in a smart home. Building Research & Information, 46(01), 127–39.

Hariga, M and El-Sayegh, S M (2011) Cost Optimization Model for the Multiresource Leveling Problem with Allowed Activity Splitting. Journal of Construction Engineering and Management, 137(01), 56–64.

Harinarain, N and Haupt, T C (2016) Mission: studio based learning in construction. The University of KwaZulu-Natal case study. Journal of Engineering, Design and Technology, 14(01), 160-81.

Harran, M (2011) Dominant feedback practices: shaping engineer literacy perceptions. Journal of Engineering, Design and Technology, 9(01), 85–109.

Harran, M and Theunissen, H W (2019) Navigating the engineering literacy divide: design report collaboration practice realities. Journal of Engineering, Design and Technology, 17(01), 77–101.

Harris, R A, Bowlby, W and Cohn, L F (1987) Method for Analyzing Construction Haul Noise Impacts. Journal of Construction Engineering and Management, 113(01), 6–16.

Harriss, C (1998) Why research without theory is not research: a reply to Seymour et al.. Construction Management and Economics, 16(01), 113-6.

Hartenberger, U, Lorenz, D and Lützkendorf, T (2013) A shared built environment professional identity through education and training. Building Research & Information, 41(01), 60-76.

Hartmann, T and Fischer, M (2007) Supporting the constructability review with 3D/4D models. Building Research & Information, 35(01), 70–80.

Hashem M. Mehany, M S, Killingsworth, J and Shah, S (2021) An Evaluation of Training Delivery Methods’ Effects on Construction Safety Training and Knowledge Retention - A Foundational Study. International Journal of Construction Education and Research, 17(01), 18–36.

Hashim, H M, Ng, Y G, Talib, O and Md Tamrin, S B (2019) Content validation of flood disaster preparedness action (FDPA) items among small and medium enterprises (SME) business. International Journal of Disaster Resilience in the Built Environment, 10(01), 2–13.

Hashim, N I and Chileshe, N (2012) Major challenges in managing multiple project environments (MPE) in Australia's construction industry. Journal of Engineering, Design and Technology, 10(01), 72-92.

Hassan, M M and Gruber, S (2008) Application of discrete-event simulation to study the paving operation of asphalt concrete. Construction Innovation, 8(01), 7–22.

Hassan, M M and Gruber, S (2008) Simulation of Concrete Paving Operations on Interstate-74. Journal of Construction Engineering and Management, 134(01), 2–9.

Hassan, M M, Odeh, I and El-Rayes, K (2011) New Approach to Compare Glare and Light Characteristics of Conventional and Balloon Lighting Systems. Journal of Construction Engineering and Management, 137(01), 39–44.

Hassan, N M, Al Maazmi, T, Al Hadhrami, A and Al Hosani, M (2016) Discrete event simulation: A vital tool for a concurrent life cycle design. Construction Innovation, 16(01), 67-80.

Hassan, T M and McCaffer, R (2003) Virtual Enterprises in Construction: ICT, Social and Legal Dimensions. Journal of Construction Procurement, 9(01).

Hassan, T M, McCaffer, R and Thorpe, A (1999) Emerging clients' needs for Large Scale Engineering projects. Engineering, Construction and Architectural Management, 6(01), 21–9.

Hassanain, M A, Adewale, B, Al-Hammad, A and Sanni-Anibire, M O (2018) Factors affecting building services’ coordination during the design development and review stages. Built Environment Project and Asset Management, 8(01), 64–77.

Hassanain, M A, Aljuhani, M, Sanni-Anibire, M O and Abdallah, A (2019) Interdisciplinary design checklists for mechanical, electrical and plumbing coordination in building projects. Built Environment Project and Asset Management, 9(01), 29–43.

Hassanain, M A, Mathar, H and Aker, A (2016) Post-occupancy evaluation of a university student cafeteria. Architectural Engineering and Design Management, 12(01), 67–77.

Hassanein, A A G and Afify, H M F (2006) Contractors' risk identification behaviour: a case study. Journal of Construction Procurement, 12(01).

Hassanein, A A G and Nemr, W E (2007) Management of Change Order Claims in the Egyptian Industrial Construction Sector. Journal of Financial Management of Property and Construction, 12(01), 45–60.

Hatamleh, M T, Hiyassat, M, Sweis, G J and Sweis, R J (2018) Factors affecting the accuracy of cost estimate: Case of Jordan. Engineering, Construction and Architectural Management, 25(01), 113-31.

Hatayama, H and Tahara, K (2016) Using decomposition analysis to forecast metal usage in the building stock. Building Research & Information, 44(01), 63-72.

Hatcher, C (2015) Illegal geographies of the state: the legalisation of a “squatter” settlement in Bishkek, Kyrgyzstan. International Journal of Law in the Built Environment, 7(01), 39-54.

Hatipkarasulu, Y (2020) A conceptual approach to graphically compare construction schedules. Construction Innovation , 20(01), 43–60.

Hatmoko, J U D and Scott, S (2010) Simulating the impact of supply chain management practice on the performance of medium-sized building projects. Construction Management and Economics, 28(01), 49.

Hatush, Z and Skitmore, M R (1997) Criteria for contractor selection. Construction Management and Economics, 15(01), 19-38.

Hauck, A J, Walker, D H T, Hampson, K D and Peters, R J (2004) Project Alliancing at National Museum of Australia—Collaborative Process. Journal of Construction Engineering and Management, 130(01), 143–52.

Haupt, T (2003) Student attitudes towards cooperative construction education experiences. Construction Economics and Building, 3(01), 31-42.

Haupt, T and Fester, F (2012) Women-owned construction enterprises: a South African assessment. Journal of Engineering, Design and Technology, 10(01), 52-71.

Haupt, T C (2003) A study of management attitudes to a performance approach to construction worker safety. Journal of Construction Research, 4(01), 87–100.

Haupt, T C and Smallwood, J (2003) Hiv/Aids in Construction: Are Older Workers Aware?. Journal of Engineering, Design and Technology, 1(01), 43–54.

Haupt, T C, Munshi, M and Smallwood, J (2005) HIV and AIDS in South African construction: is age nothing but a number?. Construction Management and Economics, 23(01), 107-19.

Hayles, C S (2010) An examination of decision making in post disaster housing reconstruction. International Journal of Disaster Resilience in the Built Environment, 1(01), 103–22.

He, C, McCabe, B, Jia, G and Sun, J (2020) Effects of Safety Climate and Safety Behavior on Safety Outcomes between Supervisors and Construction Workers. Journal of Construction Engineering and Management, 146(01).

Heard, I, Love, P E D, Sing, M C P and Goerke, V (2017) Learning to build relationships for a better Australia: Indigenous reconciliation in action in the construction and resource sectors. Construction Innovation, 17(01), 4-24.

Hedgren, E and Stehn, L (2014) The impact of clients' decision-making on their adoption of industrialized building. Construction Management and Economics, 32(01), 126-45.

Hegazy, T (2006) Computerized System for Efficient Delivery of Infrastructure Maintenance/Repair Programs. Journal of Construction Engineering and Management, 132(01), 26–34.

Hegazy, T and Moselhi, O (1994) Estimator: a prototype of an integrated bid preparation system. Engineering, Construction and Architectural Management, 1(01), 51–67.

Hegazy, T, Abdel-Monem, M and Saad, D A (2014) Framework for enhanced progress tracking and control of linear projects. Engineering, Construction and Architectural Management, 21(01), 94-110.

Heidemann, A and Gehbauer, F (2011) The way towards cooperative project delivery. Journal of Financial Management of Property and Construction, 16(01), 19–30.

Heijden, J v d (2009) International comparative analysis of building regulations: an analytical tool. International Journal of Law in the Built Environment, 1(01), 9-25.

Heijden, J v d and Bueren, E v (2013) Regulating sustainable construction in Europe: An inquiry into the European Commission's harmonization attempts. International Journal of Law in the Built Environment, 5(01), 5-20.

Hejducki, Z (2004) Sequencing problems in methods of organising construction processes. Engineering, Construction and Architectural Management, 11(01), 20–32.

Helen, L, Ron, W and Patrick, C (2011) The development and testing of a hierarchical measure of project OHS performance. Engineering, Construction and Architectural Management, 18(01), 30–49.

Hellas, M S, Chaib, R and Verzea, I (2019) Artificial intelligence treating the problem of uncertainty in quantitative risk analysis (QRA). Journal of Engineering, Design and Technology , 18(01), 40–54.

Henceroth, J, Friend, R M, Thinphanga, P, Tran, P V G and Nghiem, T P (2015) Lessons from self-assessments within urban climate resilience programs. International Journal of Disaster Resilience in the Built Environment, 6(01), 86-101.

Henderson, K (2007) Achieving legitimacy: visual discourses in engineering design and green building code development. Building Research & Information, 35(01), 6–17.

Hendrickson, C and Horvath, A (2000) Resource Use and Environmental Emissions of U.S. Construction Sectors. Journal of Construction Engineering and Management, 126(01), 38–44.

Henjewele, C, Sun, M and Fewings, P (2012) Analysis of factors affecting value for money in UK PFI projects. Journal of Financial Management of Property and Construction, 17(01), 9-28.

Henneberry, J and Rowley, S (2002) Property market processes and development outcomes in cities and regions. Journal of Financial Management of Property and Construction, 7(01), 3–15.

Henriksen, H M (0) From science to sales: changing representations of zero emission housing. Buildings and Cities, 4(01), 594–611.

Herbert, Y, Dale, A and Stashok, C (2022) Canadian cities: climate change action and plans. Buildings and Cities, 3(01), 854–73.

Herbsman, Z and Ellis, R (1992) Multiparameter Bidding System—Innovation in Contract Administration. Journal of Construction Engineering and Management, 118(01), 142–50.

Herbsman, Z and Ellis, R (1990) Research of factors influencing construction productivity. Construction Management and Economics, 8(01), 49-61.

Herbsman, Z and Mitrani, J D (1984) INES—An Interactive Estimating System. Journal of Construction Engineering and Management, 110(01), 19–33.

Hettiarachchi, M, Athukorale, K, Wijekoon, S and Alwis, A d (2014) Urban wetlands and disaster resilience of Colombo, Sri Lanka. International Journal of Disaster Resilience in the Built Environment, 5(01), 79-89.

Heylighen, A, Martin, W M and Cavallin, H (2007) Building stories revisited: unlocking the knowledge capital of architectural practice. Architectural Engineering and Design Management, 3(01), 65–74.

Heylighen, A, Neuckermans, H, Casaer, M and Dewulf, G P M (2007) Building memories. Building Research & Information, 35(01), 90–100.

Hietajärvi, A-M and Aaltonen, K (2018) The formation of a collaborative project identity in an infrastructure alliance project. Construction Management and Economics, 36(01), 1-21.

Higgins, D M (2013) The black swan effect and the impact on Australian property forecasting. Journal of Financial Management of Property and Construction, 18(01), 76-89.

Hilf, J W (1987) Rolled Concrete Dams Using Gap‐Graded Aggregate. Journal of Construction Engineering and Management, 113(01), 27–33.

Hill, S, Lorenz, D, Dent, P and Lützkendorf, T (2013) Professionalism and ethics in a changing economy. Building Research & Information, 41(01), 8-27.

Hindle, R D and Muller, M H (1997) The role of education as an agent of change: a two-fold effect. Journal of Construction Procurement, 3(01), 56–69.

Hinze, J (1987) Qualities of Safe Superintendents. Journal of Construction Engineering and Management, 113(01), 169–71.

Hinze, J and Antal, T (1991) Construction Contract Provisions for Preservation of Artifacts. Journal of Construction Engineering and Management, 117(01), 106–17.

Hinze, J and Bren, K (1996) Identifying OSHA Paragraphs of Particular Interest. Journal of Construction Engineering and Management, 122(01), 98–100.

Hinze, J and Godfrey, R (2003) An Evaluation of Safety Performance Measures for Construction Projects. Journal of Construction Research, 4(01), 5–15.

Hinze, J, Hirakawa, J and Benjamin, N (1989) Comparison of Labor Agreements. Journal of Construction Engineering and Management, 115(01), 90–107.

Hinze, J, Pedersen, C and Fredley, J (1998) Identifying Root Causes of Construction Injuries. Journal of Construction Engineering and Management, 124(01), 67–71.

Hipwood, T (2022) Adapting owner-occupied dwellings in the UK: lessons for the future. Buildings and Cities, 3(01), 297–315.

Hirano, S, Kayumba, E, Grafweg, A and Kelman, I (2011) Developing Rwanda's schools infrastructure standards and guidelines. International Journal of Disaster Resilience in the Built Environment, 2(01), 30–46.

Hitchings, R (2022) Understanding air-conditioned lives: qualitative insights from Doha. Buildings and Cities, 3(01), 28–41.

Ho, C M-F and Ng, V C-W (2003) Quantity surveyors' background and training, and their ethical concepts, conceptions and interests considerations. Construction Management and Economics, 21(01), 43-67.

Ho, K H D, Hui, E C M and Su, H (2010) Examining fuzzy tactical asset allocation (FTAA) as an alternative to modern portfolio theory (MPT) asset allocation for international and direct real estate investment. Journal of Financial Management of Property and Construction, 15(01), 71–94.

Ho, S P and Liu, L Y (2004) Analytical Model for Analyzing Construction Claims and Opportunistic Bidding. Journal of Construction Engineering and Management, 130(01), 94–104.

Ho, S P and Liu, L Y (2003) How to Evaluate and Invest in Emerging A/E/C Technologies under Uncertainty. Journal of Construction Engineering and Management, 129(01), 16–24.

Hoare, D and Broome, J (2001) Bills of Quantities versus Activity Schedules for Civil Engineering Projects. Journal of Construction Procurement, 7(01), 11–26.

Hochachka, G, Logan, K G, Raymond, J and Mérida, W (2022) Climate action in urban mobility: personal and political transformations. Buildings and Cities, 3(01), 1019–41.

Hodkinson, S and Essen, C (2015) Grounding accumulation by dispossession in everyday life: The unjust geographies of urban regeneration under the Private Finance Initiative. International Journal of Law in the Built Environment, 7(01), 72-91.

Hoezen, M, Voordijk, H and Dewulf, G (2012) Contracting dynamics in the competitive dialogue procedure. Built Environment Project and Asset Management, 2(01), 6-24.

Hofman, E, Voordijk, H and Halman, J (2009) Matching supply networks to a modular product architecture in the house-building industry. Building Research & Information, 37(01), 31–42.

Hofman, P, Wade, F, Webb, J and Groenleer, M (2021) Retrofitting at scale: comparing transition experiments in Scotland and the Netherlands. Buildings and Cities, 2(01), 637–54.

Hogg, K (2003) The role of the quantity surveying profession in accommodating client risk. Journal of Financial Management of Property and Construction, 8(01), 49–56.

Holley, P W (2006) Effectiveness of IT-based course material: a case study in publishing and using a digital textbook for construction surveying. International Journal of Construction Education and Research, 2(01), 29-41.

Holmes, S H, Phillips, T and Wilson, A (2016) Overheating and passive habitability: Indoor health and heat indices. Building Research & Information, 44(01), 1-19.

Holt, E A, Chasek, C, Shaurette, M and Cox, R (2018) The learning styles of undergraduate students in CM bachelor's degree programs in the US. International Journal of Construction Education and Research, 14(01), 4-21.

Holt, G D (2013) Construction business failure: conceptual synthesis of causal agents. Construction Innovation, 13(01), 50-76.

Holt, G D (2016) Historical British antecedents of innovative construction project organisation and social structures. Construction Innovation, 16(01), 46-66.

Holt, G D and Edwards, D J (2005) Domestic builder selection in the uk housing repair and maintenance sector: a critique. Journal of Construction Research, 6(01), 123–37.

Holt, G D and Edwards, D J (2012) Innovation or business survival?: A preliminary, qualitative study of UK construction plant supply chains. Construction Innovation, 12(01), 99–122.

Holt, G D and Goulding, J S (2017) PROD2UCT: an outcome-oriented dissertation study model for construction engineering students. Journal of Engineering, Design and Technology, 15(01), 104-17.

Holt, G D, Goulding, J S and Akintoye, A (2016) Enablers, challenges and relationships between research impact and theory generation. Engineering, Construction and Architectural Management, 23(01), 20-39.

Holt, G D, Olomolaiye, P O and Harris, F C (1994) Evaluating performance potential in the selection of construction contractors. Engineering, Construction and Architectural Management, 1(01), 29–50.

Holt, G D, Olomolaiye, P O and Harris, F C (1996) Tendering procedures, contractual arrangements and Latham: the contractors' view. Engineering, Construction and Architectural Management, 3(01), 97–115.

Holt, G D, Proverbs, D G and Whitehouse, L (2001) A survey of public sector procurement in England. Journal of Construction Procurement, 7(01), 3–10.

Holt, L (1983) A case study of the construction of a terephthalic acid plant for Imperial Chemicals Limited at the Davies Works, Wilton, Cleveland, UK. Construction Management and Economics, 1(01), 57-74.

Hong, S-M, Paterson, G, Mumovic, D and Steadman, P (2014) Improved benchmarking comparability for energy consumption in schools. Building Research & Information, 42(01), 47-61.

Hopkin, T, Lu, S-L, Rogers, P and Sexton, M (2016) Detecting defects in the UK new-build housing sector: A learning perspective. Construction Management and Economics, 34(01), 35-45.

Horman, M J and Kenley, R (2005) Quantifying Levels of Wasted Time in Construction with Meta-Analysis. Journal of Construction Engineering and Management, 131(01), 52–61.

Hossain, L (2009) Communications and coordination in construction projects. Construction Management and Economics, 27(01), 25–39.

Hosseini, K A, Hosseini, M, Hosseinioon, S, Izadkhah, Y O, Shaw, T and Takahashi, R (2014) A survey on evacuation planning and its challenges for potential earthquake in Tehran. International Journal of Disaster Resilience in the Built Environment, 5(01), 38-52.

Hosseini, M R, Bosch-Sijtsema, P, Arashpour, M, Chileshe, N and Merschbrock, C (2018) A qualitative investigation of perceived impacts of virtuality on effectiveness of hybrid construction project teams. Construction Innovation, 18(01), 109-31.

Hosseini, M R, Roelvink, R, Papadonikolaki, E, Edwards, D J and Pärn, E (2018) Integrating BIM into facility management. International Journal of Building Pathology and Adaptation, 36(01), 2–14.

Hosseinian, S M and Tavakoli, M (2023) Markets, Hierarchies, or Hybrids as Alternative Governance Structures in Construction Contracts: Transaction Cost Economics Analysis. Journal of Construction Engineering and Management, 149(01).

Hosseinian, S M, Andalib, M and Carmichael, D G (2022) Appropriate Types of Payments in Construction Contracts Based on Agency Theory Parameters. Journal of Construction Engineering and Management, 148(01).

Householder, J L and Rutland, H E (1990) Who Owns Float?. Journal of Construction Engineering and Management, 116(01), 130–3.

Howieson, J (2011) ADR for a built environment interdiscipline: curriculum and practical applications. International Journal of Law in the Built Environment, 3(01), 11–23.

Hoxha, E, Passer, A, Saade, M R M, Trigaux, D, Shuttleworth, A, Pittau, F, Allacker, K and Habert, G (2020) Biogenic carbon in buildings: a critical overview of LCA methods. Buildings and Cities, 1(01), 504–24.

Hoxie, C, Berkebile, R and Todd, J A (2012) Stimulating regenerative development through community dialogue. Building Research & Information, 40(01), 65–80.

Hoxley, M and Rowsell, R (2006) Using video in the construction technology classroom. Architectural Engineering and Design Management, 2(01), 115–22.

Hsu, Y (2017) Design-oriented strategy typology and innovation framework. Journal of Engineering, Design and Technology, 15(01), 13-30.

Hu, F, Liao, R and Chen, J (2023) Calculation Methods to Optimize the Number of Pedestals and Evaluate Production Plans for Precast Yards Fabricating Prestressed Bridge Beams and Precast Segments for Poststressed Segmental Erection. Journal of Construction Engineering and Management, 149(01).

Hu, H and Zhu, Y (2015) Social Welfare–Based Concession Model for Build/Operate/Transfer Contracts. Journal of Construction Engineering and Management, 141(01).

Hu, Y, Liu, M, Le, Y and Skitmore, M (2022) External Consultant Involvement for Organizational Capability Building in Complex Construction Projects: A Perspective from Interorganizational Learning Process. Journal of Construction Engineering and Management, 148(01).

Hua, Y, Kang, F, Zhang, S and Li, J (2023) Impacts of task interdependence and equivocality on ICT adoption in the construction industry: a task-technology fit view. Architectural Engineering and Design Management, 19(01), 92–109.

Huang, C and Wong, C K (2017) Discretized Cell Modeling for Optimal Facility Layout Plans of Unequal and Irregular Facilities. Journal of Construction Engineering and Management, 143(01).

Huang, R-Y and Halpin, D W (2000) Graphically based LP modelling for linear scheduling analysis: the POLO system. Engineering, Construction and Architectural Management, 7(01), 41–51.

Huang, X, Bernd, D and Bernold, L E (1996) Innovative Technology Development for Safe Excavation. Journal of Construction Engineering and Management, 122(01), 91–96.

Huang, Y C (2006) Graphical-based multistage scheduling method for RC buildings. Construction Management and Economics, 24(01), 5-18.

Hubbard, P (2015) Law, sex and the city: regulating sexual entertainment venues in England and Wales. International Journal of Law in the Built Environment, 7(01), 5-20.

Huebner, G M, Fell, M J and Watson, N E (2021) Improving energy research practices: guidance for transparency, reproducibility and quality. Buildings and Cities, 2(01), 1–20.

Huebner, G M, Watson, N E, Direk, K, McKenna, E, Webborn, E, Hollick, F, Elam, S and Oreszczyn, T (2021) Survey study on energy use in UK homes during Covid-19. Buildings and Cities, 2(01), 952–69.

Hughes, C and Crosby, N (2012) The challenge of self-regulation in commercial property leasing: a study of lease codes in the UK. International Journal of Law in the Built Environment, 4(01), 23-44.

Hughes, W (1997) Construction management contracts: law and practice. Engineering, Construction and Architectural Management, 4(01), 59–79.

Hughes, W (1989) Identifying the environments of construction projects. Construction Management and Economics, 7(01), 29-40.

Hughes, W and Hughes, C (2013) Professionalism and professional institutions in times of change. Building Research & Information, 41(01), 28-38.

Hughes, W, Hillebrandt, P and Murdoch, J (2000) The impact of contract duration on the cost of cash retention. Construction Management and Economics, 18(01), 11-4.

Hugo, J M (2023) Heat stress: adaptation measures in South African informal settlements. Buildings and Cities, 4(01), 55–73.

Hui, E C M (2002) Land use regulations and property market. Journal of Financial Management of Property and Construction, 7(01), 65–71.

Hui, E C M and Lam, M C M (2004) Holistic perspective of population mobility: a review. Journal of Financial Management of Property and Construction, 9(01), 53–62.

Hui, E C M and Ng, I M H (2008) A risk-based option pricing strategy for property valuation: an empirical study in Hong Kong. Journal of Financial Management of Property and Construction, 13(01), 48–59.

Hulio, Z H and Jiang, W (2019) An assessment of effects of non-stationary operational conditions on wind turbine under different wind scenario. Journal of Engineering, Design and Technology , 18(01), 102–21.

Hunter, I, Mitrovic, D, Hassan, T M, Gayoso, A and Garas, F (1999) The eLSEwise vision, development routes and recommendations1. Engineering, Construction and Architectural Management, 6(01), 51–62.

Hunter, K and Kelly, J (2004) Value management workshops and partnering conundrums. Journal of Construction Procurement, 10(01).

Hussein, D, Sarkar, S and Armstrong, P (2018) Mapping preferences for the number of built elements. Smart and Sustainable Built Environment, 7(01), 53–67.

Hutchings, D M and Christofferson, J P (2004) Management practices of residential construction companies producing 25 or fewer units annually. International Journal of Construction Education and Research, 1(01), 34–44.

Huuhka, S (0) Understanding demolition. Buildings and Cities, 4(01), 927–37.

Huuhka, S and Lahdensivu, J (2016) Statistical and geographical study on demolished buildings. Building Research & Information, 44(01), 73-96.

Huuhka, S, Moisio, M, Salmio, E, Köliö, A and Lahdensivu, J (0) Renovate or replace? Consequential replacement LCA framework for buildings. Buildings and Cities, 4(01), 212–28.

Hvid Horup, L, Ohms, P K, Hauschild, M, Gummidi, S R B, Secher, A Q, Thuesen, C and Ryberg, M (0) Evaluating mitigation strategies for building stocks against absolute climate targets. Buildings and Cities, 5(01), 117–32.

Hwang, B, Zhao, X and Lim, J (2019) Job satisfaction of project managers in green construction projects. Engineering, Construction and Architectural Management, 27(01), 205–26.

Hwang, Y H, Feng, Y and Tan, P Y (2016) Managing deforestation in a tropical compact city (Part B): Urban ecological approaches to landscape design. Smart and Sustainable Built Environment, 5(01), 73-92.

Hyari, K, El-Mashaleh, M and Kandil, A (2010) Optimal assignment of multiskilled labor in building construction projects. International Journal of Construction Education and Research, 6(01), 80.

Hyde, R (1995) Buildability as a design concept for architects: a case study of laboratory buildings. Engineering, Construction and Architectural Management, 2(01), 45–56.

Ibbs, C W and Terveer, K R (1984) Integrated Construction Preventive Maintenance System. Journal of Construction Engineering and Management, 110(01), 43–59.

Ibn Majdoub Hassani, Z, El Barkany, A, Jabri, A, El Abbassi, I and Darcherif, A M (2019) Hybrid approach for solving the integrated planning and scheduling production problem. Journal of Engineering, Design and Technology , 18(01), 172–89.

Ibraheem, Y, Piroozfar, P A, Farr, E R and Ravenscroft, N (2019) Methodological evaluation of Integrated Façade Systems. International Journal of Building Pathology and Adaptation, 38(01), 107–26.

Ibrahim, A D, Price, A D F and Dainty, A R J (2006) An analysis of success factors for public private partnerships in infrastructure projects in Nigeria. Journal of Construction Procurement, 12(01).

Ibrahim, Y M (2010) On the measurement of work in progress using computer vision: a computerised reporting model. Journal of Engineering, Design and Technology, 8(01), 45–63.

Idoro, G (2012) Comparing levels of use of project plans and performance of traditional contract and design-build construction projects in Nigeria. Journal of Engineering, Design and Technology, 10(01), 7-33.

Idrus, A B and Newman, J B (2002) Construciton related factors influencing the choice of concrete floor systems. Construction Management and Economics, 20(01), 13-9.

Ihm, S, Lee, H, Lee, E and Park, Y (2021) A policy knowledge- and reasoning-based method for data-analytic city policymaking. Building Research & Information, 49(01), 38–54.

Ikuabe, M O and Oke, A E (2019) Contractors’ opportunism: construction professionals’ awareness of influencing factors. Journal of Engineering, Design and Technology, 17(01), 102–14.

Ikuabe, M, Oke, A E and Aigbavboa, C (2020) Impact of contractors’ opportunism on construction project transaction costs. Journal of Financial Management of Property and Construction , 25(01), 125–41.

Ilozor, B D (2008) Architectural and building features disparity and preservation of structural and fabrics integrity. Journal of Engineering, Design and Technology, 6(01), 33–47.

Ilozor, B D and Ilozor, D B (2005) Open-plan attributes and effective facilities management. Journal of Engineering, Design and Technology, 3(01), 1–11.

Ilter, D (2012) Identification of the relations between dispute factors and dispute categories in construction projects. International Journal of Law in the Built Environment, 4(01), 45-59.

Inayat, A, Melhem, H and Esmaeily, A (2015) Critical Success Factors in an Agency Construction Management Environment. Journal of Construction Engineering and Management, 141(01).

Ioannou, P G and Leu, S (1993) Average‐Bid Method—Competitive Bidding Strategy. Journal of Construction Engineering and Management, 119(01), 131–47.

Ireland, V (1985) The role of managerial actions in the cost, time and quality performance of high-rise commercial building projects. Construction Management and Economics, 3(01), 59-87.

Irizarry, J and Abraham, D M (2006) Assessment of risk perception of ironworkers. Journal of Construction Research, 7(01), 111–32.

Isaacs, N and Hills, A (2014) Understanding the New Zealand non-domestic building stock. Building Research & Information, 42(01), 95-108.

Ismail, Z-A (2017) Maintenance management system (MMS) to support facilities management at Malaysian polytechnic. Smart and Sustainable Built Environment, 6(01), 19-33.

Issa, R R, Olbina, S and Zuppa, D (2018) Model for developing trust on US construction projects. Built Environment Project and Asset Management, 8(01), 5–23.

Izumi, T, Sukhwani, V, Surjan, A and Shaw, R (2020) Managing and responding to pandemics in higher educational institutions: initial learning from COVID-19. International Journal of Disaster Resilience in the Built Environment, 12(01), 51–66.

Järvenpää, A, Eriksson, P E and Larsson, J (2022) Exploring a public client’s control systems in infrastructure projects from a relationship history perspective. Construction Management and Economics, 40(01), 56–71.

Jaafar, M and Radzi, N M (2013) Level of satisfaction and issues with procurement systems used in the Malaysian public sector. Construction Economics and Building, 13(01), 50-65.

Jaafari, A and Schub, A (1990) Surviving Failures: Lessons from Field Study. Journal of Construction Engineering and Management, 116(01), 68–86.

Jaafari, A, Manivong, K K and Chaaya, M (2001) VIRCON: Interactive System for Teaching Construction Management. Journal of Construction Engineering and Management, 127(01), 66–75.

Jackson, G (2003) Contingency for cost control in project management: a case study. Construction Economics and Building, 3(01), 1-12.

Jacobs, C and Jacobs, K (2003) An Integrated Approach to Curriculum at Foundation Level. Journal of Engineering, Design and Technology, 1(01), 89–101.

Jacobs, C and Miller, S (2003) An Integrated Approach to Project Work - an Exploration of Assessment Practices from Lecturer Perspectives. Journal of Engineering, Design and Technology, 1(01), 75–87.

Jacobsson, M and Linderoth, H C J (2010) The influence of contextual elements, actors’ frames of reference, and technology on the adoption and use of ICT in construction projects: a Swedish case study. Construction Management and Economics, 28(01), 23.

Jahangiri, K, Borgheipour, H, Gendeshmin, S B, Matin, A and Monazami Tehrani, G (2019) Site selection criteria for temporary sheltering in urban environment. International Journal of Disaster Resilience in the Built Environment, 11(01), 58–70.

Jahren, C T and Hancher, D E (1989) Evaluation of New Concepts for Cellular Structure Construction. Journal of Construction Engineering and Management, 115(01), 15–34.

Jain, M and Rawal, R (2022) Emissions from a net-zero building in India: life cycle assessment. Buildings and Cities, 3(01), 398–416.

Jain, N R, Rawal, R, Vardhan, V and Dey, S (2021) Performance metrics for room air-conditioners: energy, comfort and environmental impacts. Buildings and Cities, 2(01), 666–87.

Jalali, A, Hidzir, N I, Jaafar, M and Dahalan, N (2019) Factors that trigger bullying amongst subcontractors toward intention to quit in the construction projects. Built Environment Project and Asset Management, 10(01), 140–52.

James, M W W, Albert, P C C and Chiang, Y H (2011) Construction manpower demand forecasting: A comparative study of univariate time series, multiple regression and econometric modelling techniques. Engineering, Construction and Architectural Management, 18(01), 7–29.

Janda, K B and Parag, Y (2013) A middle-out approach for improving energy performance in buildings. Building Research & Information, 41(01), 39-50.

Jandali, D and Sweis, R (2019) Factors affecting maintenance management in hospital buildings. International Journal of Building Pathology and Adaptation, 37(01), 6–21.

Jang, H, Kim, K, Kim, J and Kim, J (2011) Labour productivity model for reinforced concrete construction projects. Construction Innovation, 11(01), 92–113.

Janné, M and Fredriksson, A (2019) Construction logistics governing guidelines in urban development projects. Construction Innovation, 19(01), 89–109.

Jansson, G, Johnsson, H and Engstrom, D (2014) Platform use in systems building. Construction Management and Economics, 32(01), 70-82.

Jaradat, S, Whyte, J and Luck, R (2013) Professionalism in digitally mediated project work. Building Research & Information, 41(01), 51-9.

Jaraiedi, M, Plummer, R W and Aber, M S (1995) Incentive/Disincentive Guidelines for Highway Construction Contracts. Journal of Construction Engineering and Management, 121(01), 112–20.

Jarkas, A (2012) Factors influencing power-trowelling productivity of concrete surface floors. Journal of Engineering, Design and Technology, 10(01), 34-51.

Jarkas, A M (2012) Buildability Factors Influencing Concreting Labor Productivity. Journal of Construction Engineering and Management, 138(01), 89–97.

Jarkas, A M (2013) Primary factors influencing bid mark-up size decisions of general contractors in Kuwait. Journal of Financial Management of Property and Construction, 18(01), 53-75.

Jarkas, A M (2010) The effects of buildability factors on rebar fixing labour productivity of beamless slabs. Construction Economics and Building, 10(01), 16-35.

Jarkas, A M and Haupt, T C (2015) Major construction risk factors considered by general contractors in Qatar. Journal of Engineering, Design and Technology, 13(01), 165-94.

Jaselskis, E J, Anderson, S D and Russell, J S (1996) Strategies for Achieving Excellence in Construction Safety Performance. Journal of Construction Engineering and Management, 122(01), 61–70.

Jaselskis, E J, Han, H C, Grigas, J, Tan, L and Fahrion, D (2001) Status of Roller Mountable Microwave Asphalt Pavement Density Sensor. Journal of Construction Engineering and Management, 127(01), 46–52.

Jaselskis, E J, Kurtenbach, J M and Forrest, J (2002) Enhancing Financial Success Among Electrical Contractors. Journal of Construction Engineering and Management, 128(01), 65–75.

Jay, C I and Bowen, P A (2015) Value management and innovation: A historical perspective and review of the evidence. Journal of Engineering, Design and Technology, 13(01), 123-43.

Jayaram, S and Gonzalez, E (2011) Design and construction of a low-cost economical thermal vacuum chamber for spacecraft environmental testing. Journal of Engineering, Design and Technology, 9(01), 47–62.

Jayawardane, A K W and Harris, F C (1990) Further Development of Integer Programming in Earthwork Optimization. Journal of Construction Engineering and Management, 116(01), 18–34.

Jeelani, I, Albert, A, Han, K and Azevedo, R (2019) Are Visual Search Patterns Predictive of Hazard Recognition Performance? Empirical Investigation Using Eye-Tracking Technology. Journal of Construction Engineering and Management, 145(01).

Jeeninga, H and Kets, A (2004) Evolution of energy policy in the Netherlands: past, present and future. Building Research & Information, 32(01), 38–41.

Jefferies, D and Schweber, L (2022) Professional judgement: an institutional logic approach to contractor tender pricing. Buildings and Cities, 3(01), 518–33.

Jefferies, M, Chen, S and Conway, J (2002) Assessment of professional competence in a construction management problem-based learning setting. Construction Economics and Building, 2(01), 47-56.

Jeffries, M and Chen, S E (2004) Identifying risk factors of BOOT procurement: a case study of Stadium Australia. Construction Economics and Building, 4(01), 11-20.

Jeljeli, M N, Russell, J S, Meyer, H W G and Vonderohe, A P (1993) Potential Applications of Geographic Information Systems to Construction Industry. Journal of Construction Engineering and Management, 119(01), 72–86.

Jelodar, M B, Yiu, T W and Wlikinson, S (2015) Systematic representation of relationship quality in conflict and dispute for construction projects. Construction Economics and Building, 15(01), 89-103.

Jenkins, A W (1984) Social policy and construction wage formation: the Alberta experience. Construction Management and Economics, 2(01), 25-36.

Jensen, D A (2010) A longitudinal study of a Type I differing conditions claim: investigating the contractor’s failure to meet the reasonable prudent standard. Construction Management and Economics, 28(01), 74.

Jensen, P A (2011) Inclusive briefing and user involvement: case study of a media centre in Denmark. Architectural Engineering and Design Management, 7(01), 38–49.

Jeong, J G, Hastak, M and Syal, M (2009) Framework of manufacturer-retailer relationship in the manufactured housing construction. Construction Innovation, 9(01), 22–41.

Jeong, K S, Kagioglou, M, Haigh, R, Amaratunga, D and Siriwardena, M L (2006) Embedding good practice sharing within process improvement. Engineering, Construction and Architectural Management, 13(01), 62–81.

Jeroen van der, H (2010) Privatisation of building code enforcement: a comparative study of regimes in Australia and Canada. International Journal of Law in the Built Environment, 2(01), 60–75.

Ji, S, Park, M and Lee, H (2012) Case Adaptation Method of Case-Based Reasoning for Construction Cost Estimation in Korea. Journal of Construction Engineering and Management, 138(01), 43–52.

Jiang, A and Zhu, Y (2011) Life cycle cost analysis of residential grid-connected solar photovoltaic systems in Florida. International Journal of Construction Education and Research, 7(01), 71–81.

Jiang, A, Zhu, Y, Elsafty, A and Tumeo, M (2018) Effects of global climate change on building energy consumption and its implications in Florida. International Journal of Construction Education and Research, 14(01), 22-45.

Jiang, D, Chen, J J and Isaac, D (1999) Real estate and foreign investment in China. Journal of Financial Management of Property and Construction, 4(01), 75–87.

Jin, X-H (2009) Allocating risks in public-private partnerships using a transaction cost economic approach: a case study. Construction Economics and Building, 9(01), 19-26.

João Branco, P, Frits, M and Henk, V (2010) Building control systems of European Union countries: a comparison of tasks and responsibilities. International Journal of Law in the Built Environment, 2(01), 45–59.

John, S T, Sarkar, P and Davis, R (2023) A Long-Range Wide-Area Network System for Monitoring Early-Age Concrete Compressive Strength. Journal of Construction Engineering and Management, 149(01).

Johnson, K D and Tatum, C B (1993) Technology in Marine Construction Firms. Journal of Construction Engineering and Management, 119(01), 148–62.

Johnstone, I M (2001) Periodic refurbishment and reductions in national costs to sustain dwelling services. Construction Management and Economics, 19(01), 97-108.

Jonker-Hoffrén, P (0) Policy tensions in demolition: Dutch social housing and circularity. Buildings and Cities, 4(01), 405–21.

Jonsson, H and Rudberg, M (2014) Classification of production systems for industrialized building: a production strategy perspective. Construction Management and Economics, 32(01), 53-69.

Jose, S-G and Christine, P (2011) Value theory in lean construction. Journal of Financial Management of Property and Construction, 16(01), 8–18.

Joubert, F, Steyn, E and Pretorius, L (2021) Using the HAZOP Method to Conduct a Risk Assessment on the Dismantling of Large Industrial Machines and Associated Structures: Case Study. Journal of Construction Engineering and Management, 147(01).

Joukar, A and Nahmens, I (2016) Volatility Forecast of Construction Cost Index Using General Autoregressive Conditional Heteroskedastic Method. Journal of Construction Engineering and Management, 142(01).

Joustra, C M and Yeh, D H (2015) Framework for net-zero and net-positive building water cycle management. Building Research & Information, 43(01), 121-32.

Jung, Y and Kang, S (2007) Knowledge-Based Standard Progress Measurement for Integrated Cost and Schedule Performance Control. Journal of Construction Engineering and Management, 133(01), 10–21.

Júnior, J D R L and Alencar, C T D (2006) The office buildings market in São Paulo: time cycles to absorb vacant space and to recover investment attractiveness. Journal of Financial Management of Property and Construction, 11(01), 59–71.

K.V., P, V., V, R., V and Bhat, N (2019) Analysis of causes of delay in Indian construction projects and mitigation measures. Journal of Financial Management of Property and Construction, 24(01), 58–78.

Kähkönen, K and Rannisto, J (2015) Understanding fundamental and practical ingredients of construction project data management. Construction Innovation, 15(01), 7-23.

Kärnä, S and Junnonen, J-M (2017) Designers’ performance evaluation in construction projects. Engineering, Construction and Architectural Management, 24(01), 154-69.

Kagioglou, M, Cooper, R and Aouad, G F (2001) Performance management in construction: a conceptual framework. Construction Management and Economics, 19(01), 85-95.

Kahandawa, R, Domingo, N, Chawynski, G and Uma, S (2020) Factors impacting post-earthquake damage repair cost estimations. International Journal of Disaster Resilience in the Built Environment, 12(01), 29–49.

Kahoul, H, Belhour, S, Bellaouar, A and Dron, J P (2019) Fatigue life prediction of upper arm suspension using strain life approach. Journal of Engineering, Design and Technology, 17(01), 25–40.

Kaiser, M J, Pulsipher, A G and Byrd, R C (2005) Cost of Abrasive Cutting in Decommissioning Operations in the Gulf of Mexico. Journal of Construction Engineering and Management, 131(01), 137–48.

Kaiser, M J, Pulsipher, A G and Martin, J (2005) Cost of Site Clearance and Verification Operations in the Gulf of Mexico. Journal of Construction Engineering and Management, 131(01), 117–26.

Kaka, A P (1996) Decision support system for plant-hirers' financial strategies. Journal of Financial Management of Property and Construction, 1(01), 21–36.

Kaka, A P (1996) Towards more flexible and accurate cash-flow forecasting. Construction Management and Economics, 14(01), 35-44.

Kaka, A P and Khosrowshahi, F (2009) A mathematical-based model for company-level budgeting incorporating future unknown contracts. Engineering, Construction and Architectural Management, 16(01), 48–60.

Kaka, A P and Khosrowshahi, F (1996) Effect of different procurement routes on contractors' cash flows. Engineering, Construction and Architectural Management, 3(01), 133-45.

Kaka, A P, Lewis, J and Petros, H (2003) The effects of the variability of project planning on cost commitment curves: a case study. Engineering, Construction and Architectural Management, 10(01), 15–26.

Kaka, A, Wong, C, Fortune, C and Langford, D (2008) Culture change through the use of appropriate pricing systems. Engineering, Construction and Architectural Management, 15(01), 66–77.

Kakar, A S and Hasan, A (2024) Exploring the Combined Effects of Socio-Political Conflicts and Patriarchic Society on a Construction Career Path: Evidence from Afghan Female Professionals. International Journal of Construction Education and Research, 20(01), 98–118.

Kaluarachchi, Y and Jones, K (2014) Promoting low-carbon home adaptations and behavioural change in the older community. Architectural Engineering and Design Management, 10(01), 131-45.

Kalutara, P, Zhang, G, Setunge, S and Wakefield, R (2017) Factors that influence Australian community buildings’ sustainable management. Engineering, Construction and Architectural Management, 24(01), 94-117.

Kamara, J M, Anumba, C J and Evbuomwan, N F O (2000) Establishing and processing client requirements-a key aspect of concurrent engineering in construction. Engineering, Construction and Architectural Management, 7(01), 15–28.

Kamara, J M, Augenbroe, G, Anumba, C J and Carrillo, P M (2002) Knowledge management in the architecture, engineering and construction industry. Construction Innovation, 2(01), 53–67.

Kamardeen, I (2013) Motivation-driven learning and teaching model for construction education. Construction Economics and Building, 13(01), 36-49.

Kamardeen, I (2009) Strategic safety management information system for building projects in Singapore. Engineering, Construction and Architectural Management, 16(01), 8–25.

Kaming, P F, Olomolaiye, P O, Holt, G D and Harris, F C (1997) Factors influencing construction time and cost overruns on high-rise projects in Indonesia. Construction Management and Economics, 15(01), 83-94.

Kandil, A, El-Rayes, K and El-Anwar, O (2010) Optimization Research: Enhancing the Robustness of Large-Scale Multiobjective Optimization in Construction. Journal of Construction Engineering and Management, 136(01), 17–25.

Kang, L, Liu, S, Zhang, H and Gong, D (2021) Person anomaly detection-based videos surveillance system in urban integrated pipe gallery. Building Research & Information, 49(01), 55–68.

Kangari, R and Halpin, D W (1990) Identification of factors influencing implementation of construction robotics. Construction Management and Economics, 8(01), 89-104.

Kangari, R and Halpin, D W (1989) Potential Robotics Utilization in Construction. Journal of Construction Engineering and Management, 115(01), 126–43.

Kangari, R and Miyatake, Y (1997) Developing and Managing Innovative Construction Technologies in Japan. Journal of Construction Engineering and Management, 123(01), 72–78.

Kannimuthu, M, Raphael, B, Palaneeswaran, E and Kuppuswamy, A (2019) Optimizing time, cost and quality in multi-mode resource-constrained project scheduling. Built Environment Project and Asset Management, 9(01), 44–63.

Kanoglu, A and Arditi, D (2001) A computer-based information system for architectural design offices. Construction Innovation, 1(01), 15–29.

Kapliński, O (1993) Diminishing non-uniformity of construction processes. Construction Management and Economics, 11(01), 53-61.

Kapliński, O and Meszek, W (1992) Catastrophic and strategic aspects of building processes balancing. Construction Management and Economics, 10(01), 81-8.

Kapogiannis, G and Sherratt, F (2018) Impact of integrated collaborative technologies to form a collaborative culture in construction projects. Built Environment Project and Asset Management, 8(01), 24–38.

Karamujic, H (2012) Modelling seasonality in Australian building approvals. Construction Economics and Building, 12(01), 26-36.

Karim, K, Marosszeky, M and Davis, S (2006) Managing subcontractor supply chain for quality in construction. Engineering, Construction and Architectural Management, 13(01), 27–42.

Karshenas, S (1984) Predesign Cost Estimating Method for Multistory Buildings. Journal of Construction Engineering and Management, 110(01), 79–86.

Kartam, N A (1996) Making Effective Use of Construction Lessons Learned in Project Life Cycle. Journal of Construction Engineering and Management, 122(01), 14–21.

Kartam, S, Ballard, G and Ibbs, C W (1997) Introducing a New Concept and Approach to Modeling Construction. Journal of Construction Engineering and Management, 123(01), 89–97.

Karunasena, G and Rajagalgoda, G K (2017) A decision-making formula for value engineering applications in the Sri Lankan construction industry. Journal of Financial Management of Property and Construction, 22(01), 77-91.

Karvonen, A and Hargreaves, T (0) Data politics in the built environment. Buildings and Cities, 4(01), 920–6.

Kashiwagi, D T, Halmrast, C T and Tisthammer, T (1996) Intelligent procurement of construction systems. Journal of Construction Procurement, 2(01), 56–65.

Kashiwagi, K, Rubin, R A and Harris, M R (1988) Construction Law and Practice in Japan. Journal of Construction Engineering and Management, 114(01), 104–13.

Kaur, G, Singh, M L and Patterh, M S (2010) Analysis of significant factors in DWDM optical communication systems. Journal of Engineering, Design and Technology, 8(01), 28–44.

Kayan, B A (2015) Conservation plan and “green maintenance” from sustainable repair perspectives. Smart and Sustainable Built Environment, 4(01), 25-44.

Kayan, B A (2017) Green maintenance for heritage buildings: paint repair appraisal. International Journal of Building Pathology and Adaptation, 35(01), 63–89.

Kayatekin, C S (2021) Architectural form: flexibility, subdivision and diversity in Manhattan loft buildings. Buildings and Cities, 2(01), 888–906.

Ke, Q and Isaac, D (2007) Ownership structure and corporate performance: empirical evidence of China’s listed property companies. Journal of Financial Management of Property and Construction, 12(01), 3–10.

Ke, Y, Hao, W, Ding, H and Wang, Y (2017) Factors Influencing the Private Involvement in Urban Rail Public-Private Partnership Projects in China . Construction Economics and Building, 17(01), 90-106.

Ke, Y, Ling, F Y Y and Ning, Y (2013) Public construction project delivery process in Singapore, Beijing, Hong Kong and Sydney. Journal of Financial Management of Property and Construction, 18(01), 6-25.

Kellert, S (2016) Biophilic urbanism: the potential to transform. Smart and Sustainable Built Environment, 5(01), 8-18.

Kelley, M N (1993) Second Roebling Lecture 1991. Journal of Construction Engineering and Management, 119(01), 1–5.

Kelly, A H (2014) Amenity enhancement and biodiversity conservation in Australian suburbia: Moving towards maintaining indigenous plants on private residential land. International Journal of Law in the Built Environment, 6(01), 91-105.

Kelly, D and Ilozor, B (2019) A Quantitative Study of the Relationship between Project Performance and BIM Use on Commercial Construction Projects in the USA. International Journal of Construction Education and Research, 15(01), 3–18.

Kenley, R and Wilson, O D (1989) A construction project net cash-flow model. Construction Management and Economics, 7(01), 3-18.

Kenley, R, London, K and Watson, J (2000) Strategic procurement in the construction industry: mechanisms for public sector clients to encourage improved performance in Australia. Journal of Construction Procurement, 6(01), 4–19.

Kermanshachi, S, Dao, B, Rouhanizadeh, B, Shane, J and Anderson, S (2020) Development of the Project Complexity Assessment and Management Framework for Heavy Industrial Projects. International Journal of Construction Education and Research, 16(01), 24–42.

Kerr, W C, Tamaro, G J and Hahn, D M (1992) Exchange Place Station Subsurface Reconstruction and Improvements. Journal of Construction Engineering and Management, 118(01), 166–78.

Keswani, K (1997) The contribution of building centres to low-cost housing in India. Building Research & Information, 25(01), 50–64.

Khalafallah, A and El-Rayes, K (2008) Minimizing Construction-Related Security Risks during Airport Expansion Projects. Journal of Construction Engineering and Management, 134(01), 40–48.

Khalef, R and El-adaway, I H (2023) Identifying Design-Build Decision-Making Factors and Providing Future Research Guidelines: Social Network and Association Rule Analysis. Journal of Construction Engineering and Management, 149(01).

Khalfan, M and Raja, N (2005) Improving construction process through integration and concurrent engineering. Construction Economics and Building, 5(01), 58-66.

Khalfan, M M A and McDermott, P (2006) Once unthought, now the best practice within the construction sector. Journal of Construction Procurement, 12(01).

Khalid, G (1994) Obsolescence in hedonic price estimation of the financial impact of commercial office buildings: the case of Kuala Lumpur. Construction Management and Economics, 12(01), 37-44.

Khandelwal, M and Khanapuri, V (2015) Infrastructure debt fund policy framework in India – issues and challenges. Journal of Financial Management of Property and Construction, 20(01), 4-23.

Khanzadi, M, Nasirzadeh, F, Mir, M and Nojedehi, P (2018) Prediction and improvement of labor productivity using hybrid system dynamics and agent-based modeling approach. Construction Innovation, 18(01), 2-19.

Khesal, T, Saghaei, A, Khalilzadeh, M, Rahiminezhad Galankashi, M and Soltani, R (2019) Integrated cost, quality, risk and schedule control through earned value management (EVM). Journal of Engineering, Design and Technology, 17(01), 183–203.

Khosrowshahi, F (1996) Value profile analysis of contruction projects. Journal of Financial Management of Property and Construction, 1(01), 55–76.

Kibert, C J and Coble, R J (1995) Integrating Safety and Environmental Regulation of Construction Industry. Journal of Construction Engineering and Management, 121(01), 95–99.

Killingsworth, J, Mehany, M H and Ladhari, H (2021) General contractors’ experience using off-site structural framing systems. Construction Innovation, 21(01), 40–63.

Killip, G (2020) A reform agenda for UK construction education and practice. Buildings and Cities, 1(01), 525–37.

Kim, B and Hong, T (2012) Revised Case-Based Reasoning Model Development Based on Multiple Regression Analysis for Railroad Bridge Construction. Journal of Construction Engineering and Management, 138(01), 154–62.

Kim, H and Ham, Y (2021) Increasing Reliability of Participatory Sensing for Utility Pole Condition Assessment Using Fuzzy Inference. Journal of Construction Engineering and Management, 147(01).

Kim, J-C, Kim, D-H, Kim, J-J, Ye, J-S and Lee, H-S (2000) Segmenting the Korean housing market using multiple discriminant analysis. Construction Management and Economics, 18(01), 45-54.

Kim, J-L (2013) Genetic algorithm stopping criteria for optimization of construction resource scheduling problems. Construction Management and Economics, 31(01), 3-19.

Kim, J, Lee, S-Y and McGeorge, D (2000) A study of real estate trust institutions in Korea. Journal of Construction Research, 1(01), 33–42.

Kim, Y-W and Ballard, G (2002) Earned value method and customer earned value. Journal of Construction Research, 3(01), 55–66.

King, F (2016) Visual approaches to property law pedagogy. International Journal of Law in the Built Environment, 8(01), 80-94.

King, R (1987) Designing Plans for Constructibility. Journal of Construction Engineering and Management, 113(01), 1–5.

Kinner, E B and Stimpson, W E (1983) Artesian Pressure Relief for Trident Drydock. Journal of Construction Engineering and Management, 109(01), 74–88.

Kipling, J, Newton, R and Ormerod, M (2011) Accessing emergency rest centres in the UK: lessons learnt. International Journal of Disaster Resilience in the Built Environment, 2(01), 47–58.

Kirby, J G, Furry, D A and Hicks, D K (1988) Improvements in Design Review Management. Journal of Construction Engineering and Management, 114(01), 69–82.

Kirkham, R J (2005) Re-engineering the whole life cycle costing process. Construction Management and Economics, 23(01), 9-14.

Kirkham, R J, Boussabaine, A H and Kirkham, M P (2002) Stochastic time series forecasting of electricity costs in an NHS acute care hospital building, for use in whole life cycle costing. Engineering, Construction and Architectural Management, 9(01), 38–52.

Kishk, M and Al-Hajj, A (2000) A fuzzy model and algorithm to handle subjectivity in life cycle costing based decision-making. Journal of Financial Management of Property and Construction, 5(01), 93–104.

Kishk, M, Al-Hajj, A and Pollock, R (2002) An innovative integrated approach to whole life costing. Journal of Financial Management of Property and Construction, 7(01), 31–40.

Kissi, E, Adjei-Kumi, T, Amoah, P and Gyimah, J (2018) Forecasting Construction Tender Price Index in Ghana using Autoregressive Integrated Moving Average with Exogenous Variables Model . Construction Economics and Building, 18(01), 70-82.

Kissi, J, Dainty, A and Liu, A (2012) Examining middle managers' influence on innovation in construction professional services firms: A tale of three innovations. Construction Innovation, 12(01), 11–28.

Kitamura, A and Takeuchi, Y (1983) Seikan Tunnel. Journal of Construction Engineering and Management, 109(01), 25–38.

Kiyang, S T and Zyl, R V (2014) Empirical investigation of wireless sensor network performance in noisy environments. Journal of Engineering, Design and Technology, 12(01), 29-38.

Kleemann, F, Lederer, J, Aschenbrenner, P, Rechberger, H and Fellner, J (2016) A method for determining buildings' material composition prior to demolition. Building Research & Information, 44(01), 51-62.

Kleerekoper, L, van den Dobbelsteen, A A J F, Hordijk, G J, van Dorst, M J and Martin, C L (2015) Climate adaptation strategies: achieving insight in microclimate effects of redevelopment options. Smart and Sustainable Built Environment, 4(01), 110-36.

Klimas, E (2011) A general duty to co-operate in construction contracts? An international review. International Journal of Law in the Built Environment, 3(01), 83–96.

Klinsky, S and Mavrogianni, A (2020) Climate justice and the built environment. Buildings and Cities, 1(01), 412–28.

Koch, C (2004) Can knowledge management become global? - consulting engineering companies in the knowledge economy. Journal of Construction Research, 5(01), 107–24.

Koch, C (2014) The more the better?: Investigating performance of the Danish and Swedish offshore wind farm cluster. Journal of Financial Management of Property and Construction, 19(01), 24-37.

Kokkarinen, N, Shaw, A, Cullen, J, Pedrola, M O, Mason, A and Al-Shamma’a, A (2014) Investigation of audible carbon monoxide alarm ownership: Case study. Smart and Sustainable Built Environment, 3(01), 72-86.

Koksal, A and Arditi, D (2004) An input/output model for business failures in the construction industry. Journal of Construction Research, 5(01), 1–16.

Kolokotroni, M, Robinson-Gayle, S, Tanno, S and Cripps, A (2004) Environmental impact analysis for typical office facades. Building Research & Information, 32(01), 2–16.

Kometa, S T, Olomolaiye, P O and Harris, F C (1995) An evaluation of clients' needs and responsibilities in the construction process. Engineering, Construction and Architectural Management, 2(01), 57–76.

Kong, A and Gray, J (2006) Traditional procurement is too slow. Construction Economics and Building, 6(01), 51-62.

Kong, C W, Li, H and Love, P E D (2001) An e-commerce system for construction material procurement. Construction Innovation, 1(01), 43–54.

Konno, Y (2015) An empirical analysis of the discontinuance of business for startup contractors and property companies in Japan. Journal of Financial Management of Property and Construction, 20(01), 50-64.

Korb, S and Sacks, R (2021) Agent-Based Simulation of General Contractor–Subcontractor Interactions in a Multiproject Environment. Journal of Construction Engineering and Management, 147(01).

Korpela, J, Miettinen, R, Salmikivi, T and Ihalainen, J (2015) The challenges and potentials of utilizing building information modelling in facility management: the case of the Center for Properties and Facilities of the University of Helsinki. Construction Management and Economics, 33(01), 3-17.

Korstanje, M E (2011) Swine flu in Buenos Aires: beyond the principle of resilience. International Journal of Disaster Resilience in the Built Environment, 2(01), 59–73.

Koskela, L (2003) Is structural change the primary solution to the problems of construction?. Building Research & Information, 31(01), 85–96.

Koskela, L (2017) Why is management research irrelevant?. Construction Management and Economics, 35(01), 4-23.

Koskela, L, Huovila, P and Leinonene, J (2002) Design management in building construction: From theory to practice. Journal of Construction Research, 3(01), 1–16.

Kostourou, F (2021) Housing growth: impacts on density, space consumption and urban morphology. Buildings and Cities, 2(01), 55–78.

Koukkari, H (2010) Transformation of a research centre toward an innovation partner in the construction sector. Engineering, Construction and Architectural Management, 17(01), 89–98.

Kpamma, Z E, Adjei-Kumi, T, Ayarkwa, J and Adinyira, E (2016) An exploration of the choosing by advantages decision system as a user engagement tool in participatory design. Architectural Engineering and Design Management, 12(01), 51–66.

Kramer, S W (2008) Does Prior Project Management Work Experience Have an Effect on the Academic Achievement of University Students in the Classroom?. International Journal of Construction Education and Research, 4(01), 18-33.

Kramer, S W and Sommer, J (2013) An Initial Look at Motivations & Personality Traits of American Construction Professionals Working for International Firms. International Journal of Construction Education and Research, 9(01), 39-60.

Kretzschmar, D and Schiller, G (0) Non-domestic building stock: linking dynamics and spatial distributions. Buildings and Cities, 4(01), 727–48.

Krizek, R J, Lo, W and Hadavi, A (1996) Lessons Learned from Multiphase Reconstruction Project. Journal of Construction Engineering and Management, 122(01), 44–54.

Krych, K, Heeren, N and Hertwich, E G (2021) Factors influencing the life-cycle GHG emissions of Brazilian office buildings. Buildings and Cities, 2(01), 856–73.

Kuittinen, M (0) Building within planetary boundaries: moving construction to stewardship. Buildings and Cities, 4(01), 565–74.

Kuittinen, M and Häkkinen, T (2020) Reduced carbon footprints of buildings: new Finnish standards and assessments. Buildings and Cities, 1(01), 182–97.

Kulatunga, U and Rameezdeen, R (2014) Use of Clickers to Improve Student Engagement in Learning: Observations from the Built Environment Discipline. International Journal of Construction Education and Research, 10(01), 3-18.

Kulkarni, S, Chapman, C, Shah, H, Parn, E A and Edwards, D J (2018) Designing an efficient tidal turbine blade through bio-mimicry: a systematic review. Journal of Engineering, Design and Technology, 16(01), 101-24.

Kulkarni, S, Edwards, D J, Chapman, C, Hosseini, M R and Owusu-Manu, D (2019) A preliminary mechanical design evaluation of the Wikispeed car: for light-weighting implications. Journal of Engineering, Design and Technology, 17(01), 230–49.

Kululanga, G (2012) Capacity building of construction industries in Sub-Saharan developing countries: A case for Malawi. Engineering, Construction and Architectural Management, 19(01), 86–100.

Kululanga, G K, Edum-Fotwe, F T and McCaffer, R (2001) Measuring construction contractors' organizational learning. Building Research & Information, 29(01), 21–9.

Kumar, S, Dhingra, A and Singh, B (2018) Lean-Kaizen implementation: A roadmap for identifying continuous improvement opportunities in Indian small and medium sized enterprise. Journal of Engineering, Design and Technology, 16(01), 143-60.

Kumar, S, Yadav, N, Singh, M and Kachhawa, S (2019) Estimating India’s commercial building stock to address the energy data challenge. Building Research & Information, 47(01), 24–37.

Kumar, V S S, Hanna, A S and Adams, T (2000) Assessment of working capital requirements by fuzzy set theory. Engineering, Construction and Architectural Management, 7(01), 93–103.

Kumaraswamy, M M and Chan, D W M (1998) Contributors to construction delays. Construction Management and Economics, 16(01), 17-29.

Kumaraswamy, M M, Miller, C J, Rahman, M M, Pickernell, D G, Ng, S T and Wong, I P Y (2006) Developing web-based tools for teaching, training, learning and development. Architectural Engineering and Design Management, 2(01), 123–35.

Kumaraswamy, M, Rowlinson, S and Phua, F (2002) Accelerating cultural changes through innovative procurement processes: a Hong Kong perspective. Journal of Construction Procurement, 8(01), 3–16.

Kundak, S (2017) Enhance household resilience in Istanbul. International Journal of Disaster Resilience in the Built Environment, 8(01), 40-57.

Kunszt, G (1998) Sustainable development and the Hungarian construction industry. Building Research & Information, 26(01), 46–55.

Kurkela, M, Maksimainen, M, Julin, A, Virtanen, J, Männistö, I, Vaaja, M T and Hyyppä, H (2022) Applying photogrammetry to reconstruct 3D luminance point clouds of indoor environments. Architectural Engineering and Design Management, 18(01), 56–72.

Kurniawan, F, Ogunlana, S and Motawa, I (2014) Stakeholders’ expectations in utilising financial models for public-private partnership projects. Built Environment Project and Asset Management, 4(01), 4-21.

Kurul, E, Tah, J H M and Cheung, F (2012) Does the UK built environment sector have the institutional capacity to deliver sustainable development?. Architectural Engineering and Design Management, 8(01), 42-54.

Kus, H and Nygren, K (2002) Microenvironmental characterization of rendered autoclaved aerated concrete. Building Research & Information, 30(01), 25–34.

Kwofie, T E, Afram, S and Botchway, E (2016) A critical success model for PPP public housing delivery in Ghana. Built Environment Project and Asset Management, 6(01), 58-73.

Lützkendorf, T (2020) The role of carbon metrics in supporting built-environment professionals. Buildings and Cities, 1(01), 676–86.

Lützkendorf, T and Balouktsi, M (2022) Embodied carbon emissions in buildings: explanations, interpretations, recommendations. Buildings and Cities, 3(01), 964–73.

Lützkendorf, T and Frischknecht, R (2020) (Net-) zero-emission buildings: a typology of terms and definitions. Buildings and Cities, 1(01), 662–75.

Lützkendorf, T, Foliente, G, Balouktsi, M and Wiberg, A H (2015) Net-zero buildings: incorporating embodied impacts. Building Research & Information, 43(01), 62-81.

Lahdenperä, P (2001) An Analysis of the Statistics on Project Procurement Methods in Finland, 1989-1998. Journal of Construction Procurement, 7(01), 27–41.

Lahdenperä, P (2012) Making sense of the multi-party contractual arrangements of project partnering, project alliancing and integrated project delivery. Construction Management and Economics, 30(01), 57–79.

Lahdenperä, P and Koppinen, T (2009) Financial analysis of road project delivery systems. Journal of Financial Management of Property and Construction, 14(01), 61–78.

Lai, L W C, Ng, F W N and Yung, P (2008) The Coase Theorem and a Coasian construction economics and management research agenda. Construction Management and Economics, 26(01), 29–46.

Lam, E W M, Chan, A P C and Chan, D M W (2006) Drivers for design-build applications in the public sector of Hong Kong. Journal of Construction Procurement, 12(01).

Lam, E, Chan, A and Chan, D (2003) Why is design-build commonly used in the public sector? an illustration from Hong Kong. Construction Economics and Building, 3(01), 53-62.

Lam, K C, Cheung, S O, Tang, C M and Ng, S T (2002) Capital budgeting evaluation practices of building contractors in Hong Kong. Construction Economics and Building, 2(01), 81-93.

Lam, K C, Hu, T, Ng, S T, Yuen, R K K, Lo, S M and Wong, C T C (2001) Using an adaptive genetic algorithm to improve construction finance decisions. Engineering, Construction and Architectural Management, 8(01), 31–45.

Lam, K C, So, A T P, Hu, T S, Ng, S T, Yuen, R K K, Lo, S M, Cheung, S O and Yang, H (2001) An integration of the fuzzy reasoning technique and the fuzzy optimization method in construction project management decision-making. Construction Management and Economics, 19(01), 63-76.

Lam, P T I and Wong, F W H (2009) Improving building project performance: how buildability benchmarking can help. Construction Management and Economics, 27(01), 41–52.

Lamson-Hall, P and Martin, R (2022) The Ethiopia Urban Expansion Initiative and knowledge exchange. Buildings and Cities, 3(01), 772–91.

Landin, A and Nilsson, C-H (2001) Do quality systems really make a difference?. Building Research & Information, 29(01), 12–20.

Langford, D A, Abukhder, J, Murray, M, Hardcastle, C and Vernea, E (2004) Rethinking construction: what about the SMEs?. Journal of Construction Procurement, 10(01).

Langford, D, Martinez, V and Bititci, U (2003) Best value in construction: towards an interpretation of value from client and constructor perspectives. Journal of Construction Procurement, 9(01).

Langston, C (2013) The role of coordinate-based decision-making in the evaluation of sustainable built environments. Construction Management and Economics, 31(01), 62-77.

Langston, Y and Langston, C (2007) Building energy and cost performance: an analysis of thirty Melbourne case studies. Construction Economics and Building, 7(01), 1-18.

Langston, Y and Langston, C (2009) The inherent building energy-cost relationship: an analysis of thirty Melbourne case studies. Construction Economics and Building, 9(01), 9-18.

Lansley, P (2007) Making sense of research quality assessment. Engineering, Construction and Architectural Management, 14(01), 7–25.

Lansley, P (2013) Research assessment and the activity hypothesis. Engineering, Construction and Architectural Management, 20(01), 7-28.

Lansley, P R (2001) Building research and the quality-of-life. Building Research & Information, 29(01), 62–74.

Lansley, P R (1986) Modelling construction organizations. Construction Management and Economics, 4(01), 19-36.

Lansley, P R (1985) Putting organization research into practice. Construction Management and Economics, 3(01), 1-14.

Larsen, G D and Ballal, T M A (2005) The diffusion of innovations within a UKCI context: an explanatory framework. Construction Management and Economics, 23(01), 81-91.

Larsson, J, Eriksson, P E, Olofsson, T and Simonsson, P (2014) Industrialized construction in the Swedish infrastructure sector: core elements and barriers. Construction Management and Economics, 32(01), 83-96.

Laryea, S and Lubbock, A (2014) Tender Pricing Environment of Subcontractors in the United Kingdom. Journal of Construction Engineering and Management, 140(01).

Lassandro, P and Cosola, T (2018) Climate change mitigation: resilience indicators for roof solutions. International Journal of Disaster Resilience in the Built Environment, 9(01), 4-17.

Lateef, O A , Khamidi, M F and Idrus, A (2010) Building maintenance management in a Malaysian university campus: a case study. Construction Economics and Building, 10(01), 76-89.

Lau, E and Rowlinson, S (2005) The value base of trust for the construction industry. Journal of Construction Procurement, 11(01).

Laufer, A (1992) A micro view of the project planning process. Construction Management and Economics, 10(01), 31-43.

Laufer, A (1987) Construction safety: economics, information and management involvement. Construction Management and Economics, 5(01), 73-90.

Laufer, A (1985) On Site Performance Improvement Programs. Journal of Construction Engineering and Management, 111(01), 82–97.

Laufer, A and Cohenca, D (1990) Factors Affecting Construction‐Planning Outcomes. Journal of Construction Engineering and Management, 116(01), 135–56.

Laufer, A and Moore, B E (1983) Attitudes toward Productivity Pay Programs. Journal of Construction Engineering and Management, 109(01), 89–101.

Laufer, A and Shohet, I M (1991) Span of Control of Construction Foreman: Situational Analysis. Journal of Construction Engineering and Management, 117(01), 90–105.

Laufer, A, Shapira, A and Goren, I (1998) Implementing an integrative approach to project schedule compression. Engineering, Construction and Architectural Management, 5(01), 82–91.

Laufer, A, Tucker, R L, Shapira, A and Shenhar, A J (1994) The multiplicity concept in construction project planning. Construction Management and Economics, 12(01), 53-65.

Laukkanen, T (1999) Construction work and education: occupational health and safety reviewed. Construction Management and Economics, 17(01), 53-62.

Lavy, S and Shohet, I M (2004) Integrated maintenance management of hospital buildings: a case study. Construction Management and Economics, 22(01), 25-34.

Lavy, S, Kiss, C W and Fernandez-Solis, J L (2015) Linking design and energy performance in U.S. military hospitals. Architectural Engineering and Design Management, 11(01), 41-64.

Lawther, P and Edwards, P (2001) Design cost modelling - the way forwad. Construction Economics and Building, 1(01), 32-42.

Leaman, A and Bordass, B (1999) Productivity in buildings: the 'killer' variables. Building Research & Information, 27(01), 4–19.

Leathem, T M (2020) Development and Evaluation of a Model for Clarifying ACCE Student Learning Outcomes. International Journal of Construction Education and Research, 16(01), 43–60.

Ledbetter, B S (1985) Pioneering Construction Engineering Education. Journal of Construction Engineering and Management, 111(01), 41–51.

Ledbetter, W B (1994) Quality Performance on Successful Project. Journal of Construction Engineering and Management, 120(01), 34–46.

Leder, S, Newsham, G R, Veitch, J A, Mancini, S and Charles, K E (2016) Effects of office environment on employee satisfaction: A new analysis. Building Research & Information, 44(01), 34-50.

Lee, C, Won, J and Lee, E (2019) Method for Predicting Raw Material Prices for Product Production over Long Periods. Journal of Construction Engineering and Management, 145(01).

Lee, D and Arditi, D (2006) Total Quality Performance of Design/Build Firms Using Quality Function Deployment. Journal of Construction Engineering and Management, 132(01), 49–57.

Lee, D and Shi, J J (2006) Construction Business Automation System. Journal of Construction Engineering and Management, 132(01), 88–96.

Lee, D, Wen, L, Choi, J O and Lee, S (2023) Sensor-Integrated Hybrid Blockchain System for Supply Chain Coordination in Volumetric Modular Construction. Journal of Construction Engineering and Management, 149(01).

Lee, E, Roesler, J, Harvey, J T and Ibbs, C W (2002) Case Study of Urban Concrete Pavement Reconstruction on Interstate 10. Journal of Construction Engineering and Management, 128(01), 49–56.

Lee, J and Hyun, H (2019) Multiple Modular Building Construction Project Scheduling Using Genetic Algorithms. Journal of Construction Engineering and Management, 145(01).

Lee, J, Lorenc, S J and Bernold, L E (2003) Comparative Performance Evaluation of Tele-Operated Pipe Laying. Journal of Construction Engineering and Management, 129(01), 32–40.

Lee, S M and Olson, D L (1983) Chance Constrained Aggregate Blending. Journal of Construction Engineering and Management, 109(01), 39–47.

Lee, W V and Steemers, K (2017) Exposure duration in overheating assessments: A retrofit modelling study. Building Research & Information, 45(01), 60-82.

Lee, Y L and Lee, Y (2021) Developing an autonomous psychological behaviour of virtual user to atypical architectural geometry. Building Research & Information, 49(01), 69–83.

Lees, E (2016) The polluter pays principle and the remediation of the land. International Journal of Law in the Built Environment, 8(01), 2-20.

Legard, D A (1983) Probabilistic analysis of an idealized model of construction projects. Construction Management and Economics, 1(01), 31-45.

Legeby, A and Pech, C (0) Social values and social infrastructures: a multi-perspective approach to place. Buildings and Cities, 4(01), 801–16.

Lehtovaara, J, Seppänen, O, Peltokorpi, A, Kujansuu, P and Grönvall, M (2021) How takt production contributes to construction production flow: a theoretical model. Construction Management and Economics, 39(01), 73–95.

Leicht, R M, Hunter, S T, Saluja, C and Messner, J I (2010) Implementing Observational Research Methods to Study Team Performance in Construction Management. Journal of Construction Engineering and Management, 136(01), 76–86.

Lester, D and Torero, J (2019) Using megaproject performance outcomes to enhance decision-making behaviors in civil engineering graduates . Construction Economics and Building, 19(01), 96-110.

Leung, M and Chan, I Y S (2012) Exploring Stressors of Hong Kong Expatriate Construction Professionals in Mainland China: Focus Group Study. Journal of Construction Engineering and Management, 138(01), 78–88.

Leung, M-Y and Liu, A M M (2003) Analysis of value and project goal specificity in value management. Construction Management and Economics, 21(01), 11-9.

Leung, M-Y and Yu, J (2014) Value methodology in public engagement for construction development projects. Built Environment Project and Asset Management, 4(01), 55-70.

Leung, M-y and Yu, R K T (2003) An Investigation of Conflict Resolution in the Construction Industry. Journal of Construction Procurement, 9(01).

Leung, M-Y, Liu, A M M and Wong, M M-k (2006) Impact of stress-coping behaviour on estimation performance. Construction Management and Economics, 24(01), 55-67.

Leung, M-Y, Ng, T S, Skitmore, M and Cheung, S-O (2005) Critical stressors influencing construction estimators in Hong Kong. Construction Management and Economics, 23(01), 33-44.

Lewis, T M (1984) A review of the causes of recent problems in the construction industry of Trinidad and Tobago. Construction Management and Economics, 2(01), 37-48.

Lewis, T M (2007) Impact of globalization on the construction sector in developing countries. Construction Management and Economics, 25(01), 7-23.

Lewis, T M (2005) Public procurement and corruption in Trinidad and Tobago. Journal of Construction Procurement, 11(01).

Lhee, S C, Issa, R R A and Flood, I (2012) Prediction of Financial Contingency for Asphalt Resurfacing Projects using Artificial Neural Networks. Journal of Construction Engineering and Management, 138(01), 22–30.

Li, B, Akintoye, A, Edwards, P J and Hardcastle, C (2004) Value for money factors in the development of PPP/PFI Construction projects. Journal of Financial Management of Property and Construction, 9(01), 43–52.

Li, D and Lu, M (2017) Automated Generation of Work Breakdown Structure and Project Network Model for Earthworks Project Planning: A Flow Network-Based Optimization Approach. Journal of Construction Engineering and Management, 143(01).

Li, H (1996) Neural network models for intelligent support of mark-up estimation. Engineering, Construction and Architectural Management, 3(01), 69-81.

Li, H (1996) Selecting KBES development techniques for applications in the construction industry. Construction Management and Economics, 14(01), 67-74.

Li, H, Arditi, D and Wang, Z (2013) Factors That Affect Transaction Costs in Construction Projects. Journal of Construction Engineering and Management, 139(01), 60–68.

Li, H, Cheng, E W L and Love, P E D (2000) Partnering research in construction. Engineering, Construction and Architectural Management, 7(01), 76–92.

Li, J and Zou, P (2008) Risk identification and assessment in PPP infrastructure projects using fuzzy analytical hierarchy process and life-cycle methodology. Construction Economics and Building, 8(01), 34-48.

Li, M, Allinson, D and Lomas, K (2019) Estimation of building heat transfer coefficients from in-use data. International Journal of Building Pathology and Adaptation, 38(01), 38–50.

Li, M, Baek, M and Ashuri, B (2021) Forecasting Ratio of Low Bid to Owner’s Estimate for Highway Construction. Journal of Construction Engineering and Management, 147(01).

Li, R Y M (2012) Econometric modelling of risk adverse behaviours of entrepreneurs in the provision of house fittings in China. Construction Economics and Building, 12(01), 72-82.

Li, S (1996) New Approach for Optimization of Overall Construction Schedule. Journal of Construction Engineering and Management, 122(01), 7–13.

Li, X and Sunikka-Blank, M (2021) Urban densification and social capital: neighbourhood restructuring in Jinan, China. Buildings and Cities, 2(01), 244–63.

Li, X, Han, S, Gül, M, Al-Hussein, M and El-Rich, M (2018) 3D Visualization-Based Ergonomic Risk Assessment and Work Modification Framework and Its Validation for a Lifting Task. Journal of Construction Engineering and Management, 144(01).

Li, X, Liu, Y, Wilkinson, S and Liu, T (2019) Driving forces influencing the uptake of sustainable housing in New Zealand. Engineering, Construction and Architectural Management, 26(01), 46–65.

Li, Y and Chen, J (2022) Computer Vision–Based Counting Model for Dense Steel Pipe on Construction Sites. Journal of Construction Engineering and Management, 148(01).

Li, Y, Cao, L, Han, Y and Wei, J (2020) Development of a Conceptual Benchmarking Framework for Healthcare Facilities Management: Case Study of Shanghai Municipal Hospitals. Journal of Construction Engineering and Management, 146(01).

Li, Y, Nie, X and Chen, S (2007) Fuzzy Approach to Prequalifying Construction Contractors. Journal of Construction Engineering and Management, 133(01), 40–49.

Li, Z and Tong, X (2017) Applications of the discrete element method and Fibonacci sequence on a banana screen. Journal of Engineering, Design and Technology, 15(01), 12-18.

Lian, J K M, Foo, Z Y and Ling, F Y Y (2018) Value of internships for professional careers in the built environment sector in Singapore. Engineering, Construction and Architectural Management, 25(01), 77-89.

Liang, R, Xue, Z and Chong, H (2023) Risk Evaluation of Logistics Park Projects’ Lifecycle during the COVID-19 Pandemic: Failure Mode and Effects Analysis. Journal of Construction Engineering and Management, 149(01).

Liao, X, Lee, C Y and Chong, H (2019) Contractual practices between the consultant and employer in Chinese BIM-enabled construction projects. Engineering, Construction and Architectural Management, 27(01), 227–44.

Licina, D, Wargocki, P, Pyke, C and Altomonte, S (2021) The future of IEQ in green building certifications. Buildings and Cities, 2(01), 907–27.

Liddiard, R (2014) Room-scale profiles of space use and electricity consumption in non-domestic buildings. Building Research & Information, 42(01), 72-94.

Liddiard, R, Godoy-Shimizu, D, Ruyssevelt, P, Steadman, P, Evans, S, Humphrey, D and Azhari, R (2021) Energy use intensities in London houses. Buildings and Cities, 2(01), 336–53.

Lim, B, Nepal, M P, Skitmore, M and Xiong, B (2016) Drivers of the accuracy of developers’ early stage cost estimates in residential construction. Journal of Financial Management of Property and Construction, 21(01), 4-20.

Lim, L J W and Ling, F Y Y (2012) Human resource practices of contractors that lead to job satisfaction of professional staff. Engineering, Construction and Architectural Management, 19(01), 101–18.

Lim, T, Porras-Alvarado, J D and Zhang, Z (2019) Pricing of highway infrastructure for transportation asset management. Built Environment Project and Asset Management, 9(01), 64–79.

Lin, C, Chih, Y and Tsay, Y (2022) Determinants of the Adoption of Green Building Simulation Technologies in Architectural Design Practices in Taiwan. Journal of Construction Engineering and Management, 148(01).

Lin, E T A and Wen, K P T (2005) Singapore's contractors' attitudes towards safety culture. Journal of Construction Research, 6(01), 157–78.

Lindén, S and Josephson, P-E (2013) In-housing or out-sourcing on-site materials handling in housing?. Journal of Engineering, Design and Technology, 11(01), 90-106.

Lindblad, H (2019) Black boxing BIM: the public client’s strategy in BIM implementation. Construction Management and Economics, 37(01), 1–12.

Lindblad, H and Karrbom Gustavsson, T (2021) Public clients ability to drive industry change: the case of implementing BIM. Construction Management and Economics, 39(01), 21–35.

Lindelöf, D and Morel, N (2008) Bayesian estimation of visual discomfort. Building Research & Information, 36(01), 83–96.

Linden, K A C v d, Kurvers, S S R, Raue, A A K and Boerstra, A A C (2007) Indoor climate guidelines in The Netherlands: Developments towards adaptive thermal comfort. Construction Innovation, 7(01), 72–84.

Lindgren, J (2016) Diffusing systemic innovations: influencing factors, approaches and further research. Architectural Engineering and Design Management, 12(01), 19–28.

Lindgren, J and Emmitt, S (2017) Diffusion of a systemic innovation: A longitudinal case study of a Swedish multi-storey timber housebuilding system. Construction Innovation, 17(01), 25-44.

Lines, B C, Kakarapalli, R and Nguyen, P H (2022) Does Best Value Procurement Cost More than Low-Bid? A Total Project Cost Perspective. International Journal of Construction Education and Research, 18(01), 85–100.

Lines, B C, Sullivan, K T, Hurtado, K C and Savicky, J (2015) Planning in construction: Longitudinal study of pre-contract planning model demonstrates reduction in project cost and schedule growth. International Journal of Construction Education and Research, 11(01), 21-39.

Ling, F (2006) Design-build: how to increase its usage and its impact on architects and contractors in Singapore. Construction Economics and Building, 6(01), 12-24.

Ling, F and Leong, E (2002) Performance of design-build projects in terms of cost, quality and time: views of clients, architects and contractors in Singapore. Construction Economics and Building, 2(01), 37-46.

Ling, F Y Y (2005) Global factors affecting margin-size of construction projects. Journal of Construction Research, 6(01), 91–106.

Ling, F Y Y (2005) Models for predicting quality of building projects. Engineering, Construction and Architectural Management, 12(01), 6–20.

Ling, F Y Y and Kumaraswamy, M M (2005) The role of trust in team integration: a survey of contractors, consultants and clients in Singapore. Journal of Construction Procurement, 11(01).

Ling, F Y Y and Nguyen, D S A (2013) Strategies for construction waste management in Ho Chi Minh City, Vietnam. Built Environment Project and Asset Management, 3(01), 141-56.

Ling, F Y Y and Tran, H B T (2012) Ingredients to engender trust in construction project teams in Vietnam. Construction Innovation, 12(01), 43–61.

Ling, F Y Y, Chan, S L, Chong, E and Ee, L P (2004) Predicting Performance of Design-Build and Design-Bid-Build Projects. Journal of Construction Engineering and Management, 130(01), 75–83.

Ling, F Y Y, Ke, Y, Kumaraswamy, M M and Wang, S (2014) Key Relational Contracting Practices Affecting Performance of Public Construction Projects in China. Journal of Construction Engineering and Management, 140(01).

Lingard, H (2005) Balancing study and paid work: the experiences of construction undergraduates in an Australian university. Construction Economics and Building, 5(01), 41-47.

Lingard, H (2003) The impact of individual and job characteristics on 'burnout' among civil engineers in Australia and the implications for employee turnover. Construction Management and Economics, 21(01), 69-80.

Lingard, H and Francis, V (2007) “Negative interference” between Australian construction professionals' work and family roles: Evidence of an asymmetrical relationship. Engineering, Construction and Architectural Management, 14(01), 79–93.

Lingard, H and Turner, M (2015) Improving the health of male, blue collar construction workers: a social ecological perspective. Construction Management and Economics, 33(01), 18-34.

Lingard, H and Yesilyurt, Z (2003) The Effect of Attitudes on the Occupational Safety Actions of Australian Construction Workers: The Results of a Field Study. Journal of Construction Research, 4(01), 59–69.

Lingard, H, Blismas, N, Harley, J, Stranieri, A, Zhang, R P and Pirzadeh, P (2018) Making the invisible visible: Stimulating work health and safety-relevant thinking through the use of infographics in construction design. Engineering, Construction and Architectural Management, 25(01), 39-61.

Lingard, H, Cooke, T, Blismas, N and Wakefield, R (2013) Prevention through design: Trade-offs in reducing occupational health and safety risk for the construction and operation of a facility. Built Environment Project and Asset Management, 3(01), 7-23.

Lingard, H, Peihua Zhang, R, Blismas, N, Wakefield, R and Kleiner, B (2015) Are we on the same page? Exploring construction professionals’ mental models of occupational health and safety. Construction Management and Economics, 33(01), 73-84.

Lingard, H, Raj, I, S, Lythgo, N, Troynikov, O and Fitzgerald, C (2019) The impact of tool selection on back and wrist injury risk in tying steel reinforcement bars: a single case experiment . Construction Economics and Building, 19(01), 1-19.

Lingard, H, Saunders, L, Pirzadeh, P, Blismas, N, Kleiner, B and Wakefield, R (2015) The relationship between pre-construction decision-making and the effectiveness of risk control: Testing the time-safety influence curve. Engineering, Construction and Architectural Management, 22(01), 108-24.

Linh, T N Q, Hanh, T T T and Shaw, R (2020) COVID-19 initial preparedness and response in Vietnam during the first six months of the pandemic and the lessons for Sendai framework implementation. International Journal of Disaster Resilience in the Built Environment, 12(01), 143–55.

Linner, T, Pan, W, Hu, R, Zhao, C, Iturralde, K, Taghavi, M, Trummer, J, Schlandt, M and Bock, T (2020) A technology management system for the development of single-task construction robots. Construction Innovation , 20(01), 96–111.

Liou, F and Borcherding, J D (1986) Work Sampling Can Predict Unit Rate Productivity. Journal of Construction Engineering and Management, 112(01), 90–103.

Liou, F and Huang, C (2008) Automated Approach to Negotiations of BOT Contracts with the Consideration of Project Risk. Journal of Construction Engineering and Management, 134(01), 18–24.

Liso, K R, Kvande, T and Thue, J V (2005) High-performance weather-protective flashings. Building Research & Information, 33(01), 41–54.

Lisø, K R (2006) Integrated approach to risk management of future climate change impacts. Building Research & Information, 34(01), 1–10.

Littke, H (2016) Becoming biophilic: Challenges and opportunities for biophilic urbanism in urban planning policy. Smart and Sustainable Built Environment, 5(01), 15-24.

Littke, H (2016) Becoming biophilic: Challenges and opportunities for biophilic urbanism in urban planning policy. Smart and Sustainable Built Environment, 5(01), 15-24.

Liu, A M-M and Fellows, R (2001) An Eastern perspective on partnering. Engineering, Construction and Architectural Management, 8(01), 9–19.

Liu, J, Love, P E D, Smith, J, Regan, M and Palaneeswaran, E (2015) Review of performance measurement: Implications for public-private partnerships. Built Environment Project and Asset Management, 5(01), 35-51.

Liu, L and Napier, Z (2010) The accuracy of risk-based cost estimation for water infrastructure projects: preliminary evidence from Australian projects. Construction Management and Economics, 28(01), 100.

Liu, L and Zhu, K (2007) Improving Cost Estimates of Construction Projects Using Phased Cost Factors. Journal of Construction Engineering and Management, 133(01), 91–95.

Liu, S, Jin, H, Liu, C, Xie, B and Mills, A (2019) Government compensation and costs of non-competition guarantee for PPP rental retirement villages. Engineering, Construction and Architectural Management, 27(01), 128–49.

Liu, S, Jin, H, Liu, C, Xie, B and Mills, A (2019) Investment apportionments among participants of PPP rental retirement villages. Built Environment Project and Asset Management, 10(01), 64–77.

Liu, T, Mao, Y and Lu, S (2023) Fostering Participants’ Collaborative Innovation Performance in Megaprojects: The Effects of Perceived Partners’ Non-Mediated Power. Journal of Construction Engineering and Management, 149(01).

Livesey, P and Bold, J (2013) Overcoming inadvertent barriers to entry in large infrastructure projects. Construction Economics and Building, 13(01), 85-91.

Livingstone, N, Fiorentino, S and Short, M (2021) Planning for residential ‘value’? London’s densification policies and impacts. Buildings and Cities, 2(01), 203–19.

Lizana, J, Miranda, N D, Gross, L, Mazzone, A, Cohen, F, Palafox-Alcantar, G, Fahr, P, Jani, A, Renaldi, R, McCulloch, M and Khosla, R (2022) Overcoming the incumbency and barriers to sustainable cooling. Buildings and Cities, 3(01), 1075–97.

Lobo, Y B and Wilkinson, S (2008) New approaches to solving the skills shortages in the New Zealand construction industry. Engineering, Construction and Architectural Management, 15(01), 42–53.

Loganathan, M K and Gandhi, O P (2015) Reliability evaluation and analysis of CNC cam shaft grinding machine. Journal of Engineering, Design and Technology, 13(01), 37-73.

Loh, W H and Ofori, G (2000) Effect of registration on performance of construction subcontractors in Singapore. Engineering, Construction and Architectural Management, 7(01), 29–40.

Lohne, J, Klakegg, O J and Lædre, O (2023) Understanding the Potential for Criminal Activity in the Norwegian AEC Industry: A Building Process Perspective. Journal of Construction Engineering and Management, 149(01).

Lomas, K J (2021) Summertime overheating in dwellings in temperate climates. Buildings and Cities, 2(01), 487–94.

Lombardi, P and Ferretti, V (2015) New spatial decision support systems for sustainable urban and regional development. Smart and Sustainable Built Environment, 4(01), 45-66.

London, K A and Cadman, K (2009) Impact of a fragmented regulatory environment on sustainable urban development design management. Architectural Engineering and Design Management, 5(01), 5–23.

Loosemore, M (1999) A grounded theory of construction crisis management. Construction Management and Economics, 17(01), 9-19.

Loosemore, M (1995) Reactive management: communication and behavioural issues in dealing with the occurrence of client risks. Construction Management and Economics, 13(01), 65-80.

Loosemore, M and Chandra, V (2012) Learning through briefing: for strategic facilities management in the health sector. Built Environment Project and Asset Management, 2(01), 103-17.

Loosemore, M and Chau, D W (2002) Racial discrimination towards Asian operatives in the Australian construction industry. Construction Management and Economics, 20(01), 91-102.

Loosemore, M and Richard, J (2015) Valuing innovation in construction and infrastructure: Getting clients past a lowest price mentality. Engineering, Construction and Architectural Management, 22(01), 38-53.

Loosemore, M, Chow, V and McGeorge, D (2014) Managing the health risks of extreme weather events by managing hospital infrastructure. Engineering, Construction and Architectural Management, 21(01), 4-32.

Loosemore, M, Phua, F, Teo, M and Dunn, K (2012) Management strategies to harness cultural diversity in Australian construction sites - a social identity perspective. Construction Economics and Building, 12(01), 1-11.

Loper, J H, Marquis, E L and Rhomberg, E J (1988) Precast Prestressed Long‐Span Bridges. Journal of Construction Engineering and Management, 114(01), 95–103.

Loraine, R K (1994) Project specific partnering. Engineering, Construction and Architectural Management, 1(01), 5–16.

Lotfabadi, P and Iranmanesh, A (2024) Evaluation of learning methods in architecture design studio via analytic hierarchy process: a case study. Architectural Engineering and Design Management, 20(01), 47–64.

Lou, E C, Lee, A and Goulding, J (2020) E-readiness in construction (ERiC): self-assessment framework for UK small and medium enterprise building services providers. Architectural Engineering and Design Management, 16(01), 3–22.

Louise, B, Anders, B and Erik, S (2011) Value-driven purchasing of kitchen cabinets in industrialised housing. Journal of Financial Management of Property and Construction, 16(01), 73–83.

Louzolo-Kimbembé, P and Pettang, C (2006) A new approach for construction planning in the developing countries: the sub-structure chaining diagram (SSCD). Journal of Construction Research, 7(01), 159–76.

Love, P E and Edwards, D J (2005) Taking the pulse of UK construction project managers' health: Influence of job demands, job control and social support on psychological wellbeing. Engineering, Construction and Architectural Management, 12(01), 88–101.

Love, P E D (2002) Influence of Project Type and Procurement Method on Rework Costs in Building Construction Projects. Journal of Construction Engineering and Management, 128(01), 18–29.

Love, P E D, Irani, Z, Cheng, E and Li, H (2002) A model for supporting inter-organizational relations in the supply chain. Engineering, Construction and Architectural Management, 9(01), 2–15.

Love, P E D, Irani, Z, Li, H, Cheng, E W L and Tse, R Y C (2001) An empirical analysis of the barriers to implementing e-commerce in small-medium sized construction contractors in the state of Victoria, Australia. Construction Innovation, 1(01), 31–41.

Love, P E D, Matthews, J and Fang, W (2021) Envisioning Rework in Practice: Emergent Insights from a Longitudinal Study. Journal of Construction Engineering and Management, 147(01).

Low S P (1991) World markets in construction I: a regional analysis. Construction Management and Economics, 9(01), 63-71.

Low S P (1991) World markets in construction II: a country-by-country analysis. Construction Management and Economics, 9(01), 73-8.

Lowe, D J (2006) Supervised work experience. Architectural Engineering and Design Management, 2(01), 49–60.

Lowe, D J and Leiringer, R (2005) Commercial management in project-based organisations. Journal of Financial Management of Property and Construction, 10(01), 3–18.

Lowe, D J, Emsley, M W and Harding, A (2007) Relationships between total construction cost and design related variables. Journal of Financial Management of Property and Construction, 12(01), 11–24.

Lowe, D J, Parvar, J and Emsley, M W (2004) Development of a decision support system (DSS) for the contractor's decision to bid: regression analysis and neural networks solutions. Journal of Financial Management of Property and Construction, 9(01), 27–42.

Lowe, J G (1997) Insolvency in the UK construction industry. Journal of Financial Management of Property and Construction, 2(01), 83–112.

Lowe, J G (1987) Monopoly and the materials supply industries of the UK. Construction Management and Economics, 5(01), 57-71.

Lowe, J G (1990) The fixed capital stock in use by the UK construction industry. Construction Management and Economics, 8(01), 63-75.

Lu, M and Lam, H (2008) Critical Path Scheduling under Resource Calendar Constraints. Journal of Construction Engineering and Management, 134(01), 25–31.

Lu, M, Shen, X and Chen, W (2009) Automated Collection of Mixer Truck Operations Data in Highly Dense Urban Areas. Journal of Construction Engineering and Management, 135(01), 17–23.

Lu, W, Hua, Y and Zhang, S (2017) Logistic regression analysis for factors influencing cost performance of design-bid-build and design-build projects. Engineering, Construction and Architectural Management, 24(01), 118-32.

Lu, W, Li, Z and Wang, S (2017) The role of justice for cooperation and contract’s moderating effect in construction dispute negotiation. Engineering, Construction and Architectural Management, 24(01), 133-53.

Lu, W, Olofsson, T and Stehn, L (2011) A lean-agile model of homebuilders' production systems. Construction Management and Economics, 29(01), 25–35.

Lu, W, Ye, M, Flanagan, R and Ye, K (2016) Corporate Social Responsibility Disclosures in International Construction Business: Trends and Prospects. Journal of Construction Engineering and Management, 142(01).

Lu, Y, Girling, C, Martino, N, Kim, J, Kellett, R and Salter, J (2023) Climate action at the neighbourhood scale: Comparing municipal future scenarios. Buildings and Cities, 4(01), 83–102.

Lu, Y, Scott, A, Kim, J, Curi, C B, McCarty, J, Pardy, A, Rysanek, A, Kellett, R and Girling, C (2021) Integration of an energy–economy model with an urban energy model. Buildings and Cities, 2(01), 114–33.

Lucas-Healey, K, Ransan-Cooper, H, Temby, H and Russell, A W (2022) Who cares? How care practices uphold the decentralised energy order. Buildings and Cities, 3(01), 448–63.

Lucini, B (2013) Social capital and sociological resilience in megacities context. International Journal of Disaster Resilience in the Built Environment, 4(01), 58-71.

Luck, R (2007) Using artefacts to mediate understanding in design conversations. Building Research & Information, 35(01), 28–41.

Lucke, T and Arthur, S (2011) Plastic pipe pressures in siphonic roof drainage systems. Building Research & Information, 39(01), 79–92.

Lucko, G (2011) Integrating Efficient Resource Optimization and Linear Schedule Analysis with Singularity Functions. Journal of Construction Engineering and Management, 137(01), 45–55.

Lucko, G and Mitchell, Z W (2010) Quantitative Research: Preparation of Incongruous Economic Data Sets for Archival Data Analysis. Journal of Construction Engineering and Management, 136(01), 49–57.

Lucko, G and Rojas, E M (2010) Research Validation: Challenges and Opportunities in the Construction Domain. Journal of Construction Engineering and Management, 136(01), 127–35.

Lucko, G, Vorster, M C and Anderson-Cook, C M (2007) Unknown Element of Owning Costs—Impact of Residual Value. Journal of Construction Engineering and Management, 133(01), 3–9.

Luke, B and Carolyn, G (2010) Perceptions of occupiers' liability risk by estate managers: a case study of memorial safety in English cemeteries. International Journal of Law in the Built Environment, 2(01), 76–93.

Lum, S K (2003) Market efficiency and technical analysis in the Singapore property market. Journal of Financial Management of Property and Construction, 8(01), 29–39.

Lundgren, R (0) Social life cycle assessment of adaptive reuse. Buildings and Cities, 4(01), 334–51.

Luo, J (2001) Assessing management and performance of Sino-foreign construction joint ventures. Construction Management and Economics, 19(01), 109-17.

Luo, J and Gale, A (2000) The evolution of the Chinese construction industry. Building Research & Information, 28(01), 51–8.

Luo, M, Zhang, H, Wang, Z, Arens, E, Chen, W, Bauman, F S and Raftery, P (2021) Ceiling-fan-integrated air-conditioning: thermal comfort evaluations. Buildings and Cities, 2(01), 928–51.

Luo, Z, Chen, Y, Cen, K, Pan, H, Zhong, M and He, J (2019) Research on comprehensive environmental impact assessment of shale gas development. Journal of Engineering, Design and Technology , 18(01), 1–20.

Luu, C, Von Meding, J and Kanjanabootra, S (2017) Balancing costs and benefits in Vietnam’s hydropower industry: a strategic proposal. International Journal of Disaster Resilience in the Built Environment, 8(01), 27-39.

Ma, L, Guo, H and Fang, Y (2021) Analysis of Construction Workers’ Safety Behavior Based on Myers-Briggs Type Indicator Personality Test in a Bridge Construction Project. Journal of Construction Engineering and Management, 147(01).

Ma, L, Reed, R and Jin, X (2018) Identify the equilibrium of residential construction output: A vector error correction model approach. Engineering, Construction and Architectural Management, 25(01), 21-38.

Ma, Q, Li, S and Cheung, S O (2022) Unveiling Embedded Risks in Integrated Project Delivery. Journal of Construction Engineering and Management, 148(01).

Mabon, L, Sato, M and Mabon, N (0) Urban shrinkage as a catalyst for transformative adaptation. Buildings and Cities, 5(01), 50–63.

Machline, E, Pearlmutter, D, Cohen, C and Schwartz, M (2023) COVID-19: a catalyst for revitalizing mixed-use urban centers? The case of Paris. Building Research & Information, 51(01), 39–55.

Macieira, M, Mendonça, P, Miranda Guedes, J and Tereso, A (2022) Evaluating the efficiency of membrane’s refurbishment solutions to perform vertical extensions in old buildings using a multicriteria decision-support model. Architectural Engineering and Design Management, 18(01), 1–25.

Macintosh, A and Steemers, K (2005) Ventilation strategies for urban housing: lessons from a PoE case study. Building Research & Information, 33(01), 17–31.

MacLaren, V, Ikiz, E and Alfred, E (2022) Meeting urban GHG reduction goals with waste diversion: multi-residential buildings. Buildings and Cities, 3(01), 1042–58.

MacLeod, I A (2010) The education of innovative engineers. Engineering, Construction and Architectural Management, 17(01), 21–34.

Madikizela, K and Haupt, T (2010) Influences on women’s choices of careers in construction: a South African study. Construction Economics and Building, 10(01), 1-15.

Madsen, L V (2018) Materialities shape practices and notions of comfort in everyday life. Building Research & Information, 46(01), 71–82.

Magent, C S, Korkmaz, S, Klotz, L E and Riley, D R (2009) A design process evaluation method for sustainable buildings. Architectural Engineering and Design Management, 5(01), 62–74.

Mahamadu, A-M, Manu, P, Booth, C, Olomolaiye, P, Coker, A, Ibrahim, A and Lamond, J (2018) Infrastructure procurement skills gap amongst procurement personnel in Nigeria’s public sector. Journal of Engineering, Design and Technology, 16(01), 2-24.

Mahamadu, A, Manu, P, Mahdjoubi, L, Booth, C, Aigbavboa, C and Abanda, F (2019) The importance of BIM capability assessment. Engineering, Construction and Architectural Management, 27(01), 24–48.

Mahamid, I (2017) Effect of change orders on rework in highway projects in Palestine. Journal of Financial Management of Property and Construction, 22(01), 62-76.

Mahamid, I and Bruland, A (2012) Cost deviation in road construction projects: the case of Palestine. Construction Economics and Building, 12(01), 58-71.

Mahapatra, K, Gustavsson, L and Hemström, K (2012) Multi-storey wood-frame buildings in Germany, Sweden and the UK. Construction Innovation, 12(01), 62–85.

Mahdi, I M, Riley, M J, Fereig, S M and Alex, A P (2002) A multi-criteria approach to contractor selection. Engineering, Construction and Architectural Management, 9(01), 29–37.

Mahmoudi Motahar, M, Hosseini Nourzad, S H and Rahimi, F (2024) Integrating complete disassembly planning with deconstructability assessment to facilitate designing deconstructable buildings. Architectural Engineering and Design Management, 20(01), 150–67.

Majava, J, Haapasalo, H and Aaltonen, K (2019) Elaborating factors affecting visual control in a big room. Construction Innovation , 19(01), 34–47.

Majdalani, Z, Ajam, M and Mezher, T (2006) Sustainability in the construction industry: a Lebanese case study. Construction Innovation, 6(01), 33–46.

Malalgoda, C and Amaratunga, D (2015) A disaster resilient built environment in urban cities: The need to empower local governments. International Journal of Disaster Resilience in the Built Environment, 6(01), 102-16.

Malalgoda, C, Amaratunga, D and Haigh, R (2013) Creating a disaster resilient built environment in urban cities: The role of local governments in Sri Lanka. International Journal of Disaster Resilience in the Built Environment, 4(01), 72-94.

Malcolm, R (2011) Integrated product policy: products and their impact on energy. International Journal of Law in the Built Environment, 3(01), 48–64.

Male, S and Mitrovic, D (1999) Trends in world markets and the LSE industry. Engineering, Construction and Architectural Management, 6(01), 7–20.

Maleetipwan-Mattsson, P, Laike, T and Johansson, M (2017) The effects of user interface designs on lighting use. Journal of Engineering, Design and Technology, 15(01), 58-78.

Malekzadeh, H, Edwards, D J and Harris, F C (2005) Simulating the ground freezing process: a decision support model. Journal of Construction Research, 6(01), 107–21.

Malesev, S and Cherry, M (2021) Digital and social media marketing: Growing market share for construction SMEs. Construction Economics and Building, 21(01), 65-82.

Mallaburn, P, Azhari, R, Fawcett, T and Topouzi, M (2021) Australian non-domestic buildings policy as an international exemplar. Buildings and Cities, 2(01), 318–35.

Malmqvist, T and Brismark, J (0) Embodied carbon savings of co-living and implications for metrics. Buildings and Cities, 4(01), 386–404.

Maloney, W F and McFillen, J M (1995) Job Characteristics: Union-Nonunion Differences. Journal of Construction Engineering and Management, 121(01), 43–54.

Maloney, W F and McFillen, J M (1986) Motivation in Unionized Construction. Journal of Construction Engineering and Management, 112(01), 122–36.

Maloney, W F and McFillen, J M (1986) Motivational Implications of Construction Work. Journal of Construction Engineering and Management, 112(01), 137–51.

Maloney, W F and McFillen, J M (1985) Valence of and Satisfaction with Job Outcomes. Journal of Construction Engineering and Management, 111(01), 53–73.

Mamphweli, N S and Meyer, E L (2013) Performance monitoring system for a biomass gasifier. Journal of Engineering, Design and Technology, 11(01), 7-18.

Manavazhi, M R (2004) Assessment of the propensity for revisions in design projects through the dichotomous characterization of designer effort. Construction Management and Economics, 22(01), 47-54.

Maneschi, K and Melhado, S (2010) Scope of design for production of partition walls and facade coverings. Architectural Engineering and Design Management, 6(01), 3–17.

Mang, P and Reed, B (2012) Designing from place: a regenerative framework and methodology. Building Research & Information, 40(01), 23–38.

Manley, K and Marceau, J (2002) Integrated manufacturing-services businesses in the Australian building and construction sector. Construction Economics and Building, 2(01), 1-12.

Mansfield, J R (1997) Authorised property unit trusts: opportunities and threats. Journal of Financial Management of Property and Construction, 2(01), 35–44.

Mantzouratos, N, Gardiklis, D, Dedoussis, V and Kerhoulas, P (2004) Concise exterior lighting simulation methodology. Building Research & Information, 32(01), 42–7.

Manu, P, Ankrah, N, Proverbs, D and Suresh, S (2014) The health and safety impact of construction project features. Engineering, Construction and Architectural Management, 21(01), 65-93.

Maqsood, T, Walker, D H T and Finegan, A D (2007) Facilitating knowledge pull to deliver innovation through knowledge management: A case study. Engineering, Construction and Architectural Management, 14(01), 94–109.

Maqsoom, A, Wazir, S J, Choudhry, R M, Thaheem, M J and Zahoor, H (2020) Influence of Perceived Fairness on Contractors’ Potential to Dispute: Moderating Effect of Engineering Ethics. Journal of Construction Engineering and Management, 146(01).

Marco, A D, Mangano, G and Zou, X-Y (2012) Factors influencing the equity share of build-operate-transfer projects. Built Environment Project and Asset Management, 2(01), 70-85.

Marco, E, Tahsiri, M, Sinnett, D and Oliveira, S (2022) Architects’ ‘enforced togetherness’: new design affordances of the home. Buildings and Cities, 3(01), 168–85.

Marique, Y (2013) Cooperation and competition in complex construction projects: Implementation of EU procurement rules in England and Belgium. International Journal of Law in the Built Environment, 5(01), 53-70.

Maritz, M J and Hattingh, V (2015) Electronic communication in the construction industry. Journal of Engineering, Design and Technology, 13(01), 74-93.

Maroof, A O, Said, I and Ismail, R (2016) Factors affecting building security cost sustainability using PCA. Journal of Financial Management of Property and Construction, 21(01), 21-38.

Marques, M, Monteiro, R and Delgado, R (2018) An improved model for seismic risk assessment in Portugal. International Journal of Disaster Resilience in the Built Environment, 9(01), 70-83.

Marsh, R, Larsen, V G and Kragh, M (2010) Housing and energy in Denmark: past, present, and future challenges. Building Research & Information, 38(01), 92–106.

Marshall, H (2012) Adjudication enforcement: partial final determinations and insolvency. International Journal of Law in the Built Environment, 4(01), 60-74.

Martin, G L (1988) Training Programs for Engineering Consulting Firms. Journal of Construction Engineering and Management, 114(01), 121–32.

Martin, J C, Akande, K and Falconer, R A (2010) Innovations from the Halcrow-Cardiff University strategic collaboration. Engineering, Construction and Architectural Management, 17(01), 64.

Martin, L and Root, D (2010) Emerging contractors in South Africa: interactions and learning. Journal of Engineering, Design and Technology, 8(01), 64–79.

Martin, R (2022) Energy housekeeping: intersections of gender, domestic labour and technologies. Buildings and Cities, 3(01), 554–69.

Martinez, J C (2010) Methodology for Conducting Discrete-Event Simulation Studies in Construction Engineering and Management. Journal of Construction Engineering and Management, 136(01), 3–16.

Martino, N, Girling, C and Lu, Y (2021) Urban form and livability: socioeconomic and built environment indicators. Buildings and Cities, 2(01), 220–43.

Marzouk, M (2006) Utility theory model for equipment selection. Construction Innovation, 6(01), 21–32.

Marzouk, M and Mohamed, E (2018) Modeling bid/no bid decisions using fuzzy fault tree. Construction Innovation, 18(01), 90-108.

Marzouk, M and Moselhi, O (2004) Multiobjective Optimization of Earthmoving Operations. Journal of Construction Engineering and Management, 130(01), 105–13.

Mastrucci, A and Rao, N D (2019) Bridging India’s housing gap: lowering costs and CO₂ emissions. Building Research & Information, 47(01), 8–23.

Mathur, A (2019) Public costs and private benefits: the governance of energy efficiency in India. Building Research & Information, 47(01), 123–6.

Matipa, W M, Kelliher, D and Keane, M (2009) A strategic view of ICT supported cost management for green buildings in the quantity surveying practice. Journal of Financial Management of Property and Construction, 14(01), 79–89.

Matsumoto, I T, Stapleton, J, Glass, J and Thorpe, T (2005) Developing a framework to measure organizational and employee skills development in a professional engineering design consultancy. Construction Innovation, 5(01), 53–66.

Matsuoka, Y, Takeuchi, Y and Shaw, R (2013) Implementation of Hyogo Framework for Action in Makati City, Philippines. International Journal of Disaster Resilience in the Built Environment, 4(01), 23-42.

Matsuzaki, M, Uchikawa, C and Mitamura, T (1990) Advanced Fabrication and Erection Techniques for Long Suspension Bridge Cables. Journal of Construction Engineering and Management, 116(01), 112–29.

Mattaraia, L, Fabricio, M M and Codinhoto, R (2023) Structure for the classification of disassembly applied to BIM models.. Architectural Engineering and Design Management, 19(01), 56–73.

Matthews, J C and Stowe, R (2015) Critical Data Needs Associated with Asbestos Cement Pipe Renewal Methods. Journal of Construction Engineering and Management, 141(01).

Matthews, J, Tyler, A and Thorpe, A (1996) Pre-construction project partnering: developing the process. Engineering, Construction and Architectural Management, 3(01), 117-131.

Mattila, K G and Park, A (2003) Comparison of Linear Scheduling Model and Repetitive Scheduling Method. Journal of Construction Engineering and Management, 129(01), 56–64.

Mavrogianni, A, Pathan, A, Oikonomou, E, Biddulph, P, Symonds, P and Davies, M (2017) Inhabitant actions and summer overheating risk in London dwellings. Building Research & Information, 45(01), 119-42.

Mawdesley, M J, Al-Jibouri, S H and Clark-Hughes, J (2002) A proactive control approach to agreeing entitlement to claims in construction. Journal of Financial Management of Property and Construction, 7(01), 41–8.

Mayer, M (2020) Material recovery certification for construction workers. Buildings and Cities, 1(01), 550–64.

Mayo, R E and Liu, G (1995) Reform Agenda of Chinese Construction Industry. Journal of Construction Engineering and Management, 121(01), 80–85.

Mazza, M, Pino, M C, Peretti, S, Scolta, K and Mazzarelli, E (2014) Satisfaction level on quality of life post-earthquake rebuilding. International Journal of Disaster Resilience in the Built Environment, 5(01), 6-22.

Mbachu, J and Nkado, R (2006) Conceptual framework for assessment of client needs and satisfaction in the building development process. Construction Management and Economics, 24(01), 31-44.

Mbachu, J and Nkado, R (2007) Factors constraining successful building project implementation in South Africa. Construction Management and Economics, 25(01), 39-54.

Mbiti, T K, Blismas, N, Wakefield, R and Lombardo, R (2011) System archetypes underlying the problematic behaviour of construction activity in Kenya. Construction Management and Economics, 29(01), 3–13.

McCabe, B, AbouRizk, S and Gavin, J (2002) Time of Sampling Strategies for Asphalt Pavement Quality Assurance. Journal of Construction Engineering and Management, 128(01), 85–89.

McCall, V (2022) Inclusive Living: ageing, adaptations and future-proofing homes. Buildings and Cities, 3(01), 250–64.

McCarty, J, Scott, A and Rysanek, A (2021) Determining the retrofit viability of Vancouver’s single-detached homes: an expert elicitation. Buildings and Cities, 2(01), 354–77.

McConnell, C W, Gloeckner, G and Gilley, J (2006) Predictors of work injuries: a quantitative exploration of level of english proficiency as a predictor of work injuries in the construction industry. International Journal of Construction Education and Research, 2(01), 3-28.

McCord, K H, Ayer, S K, Lamanna, A J, Eicher, M, London, J S and Wu, W (2023) Construction Education Needs Derived from Industry Evaluations of Students and Academic Research Publications. International Journal of Construction Education and Research, 19(01), 77–98.

McCord, M, Davis, P T, Haran, M, McGreal, S and McIlhatton, D (2012) Spatial variation as a determinant of house price: Incorporating a geographically weighted regression approach within the Belfast housing market. Journal of Financial Management of Property and Construction, 17(01), 49-72.

McCoy, A, Thabet, W and Badinelli, R (2011) Defining a commercialization model for residential construction innovation: industry case studies. Construction Innovation, 11(01), 114–33.

McDermott, P, Khalfan, M and Swan, W (2005) Trust in construction projects. Journal of Financial Management of Property and Construction, 10(01), 19–32.

McDonald, B and Smithers, M (1998) Implementing a waste management plan during the construction phase of a project: a case study. Construction Management and Economics, 16(01), 71-8.

McDonald, P (1984) Construction claims costing for owners and contractors. Construction Management and Economics, 2(01), 1-12.

McEntire, D, Crocker, C G and Peters, E (2010) Addressing vulnerability through an integrated approach. International Journal of Disaster Resilience in the Built Environment, 1(01), 50–64.

McFillen, J M and Maloney, W F (1986) Human Resource Data in the Construction Industry. Journal of Construction Engineering and Management, 112(01), 22–32.

McFillen, J M and Maloney, W F (1988) New answers and new questions in construction worker motivation. Construction Management and Economics, 6(01), 35-48.

McGill, G, Sharpe, T, Robertson, L, Gupta, R and Mawditt, I (2017) Meta-analysis of indoor temperatures in new-build housing. Building Research & Information, 45(01), 19-39.

McLain, K, Gransberg, D and Loulakis, M (2014) Managing geotechnical risk on US design-build transport projects. Construction Economics and Building, 14(01), 1-19.

McWhirter, N and Shealy, T (2020) Case-based flipped classroom approach to teach sustainable infrastructure and decision-making. International Journal of Construction Education and Research, 16(01), 3–23.

Md Ali, Z, Zawawi, R, Myeda, N E and Mohamad, N (2019) Adaptive reuse of historical buildings. International Journal of Building Pathology and Adaptation, 37(01), 54–68.

Meacham, B J (2022) Fire performance and regulatory considerations with modern methods of construction. Buildings and Cities, 3(01), 464–87.

Mechlenborg, M and Gram-Hanssen, K (2022) Masculine roles and practices in homes with photovoltaic systems. Buildings and Cities, 3(01), 638–52.