ARCOM

Search or browse again.

Click on the titles below to expand the information about each abstract.
Viewing 71 results ...

Akanmu, A, Anumba, C and Messner, J (2014) Critical review of approaches to integrating virtual models and the physical construction. International Journal of Construction Management, 14(04), 267-82.

Al-Momani, A H (1996) Construction cost prediction for public school buildings in Jordan. Construction Management and Economics, 14(04), 311-7.

Alqahtani, A and Whyte, A (2016) Evaluation of non-cost factors affecting the life cycle cost: an exploratory study. Journal of Engineering, Design and Technology, 14(04), 818-34.

Arjun, R A S and Vinodh, S (2016) A case study on application of ORESTE for agile concept selection. Journal of Engineering, Design and Technology, 14(04), 781-801.

Azman, M A (2016) Bidding competitiveness: a comparative analysis of different bid auctions in Malaysia. Journal of Engineering, Design and Technology, 14(04), 678-98.

Bai, Y, Kim, S H and Burkett, W R (2007) Enhancing the capability of rapid bridge replacement after extreme events. Engineering, Construction and Architectural Management, 14(04), 375–86.

Bon, R and Yashiro, T (1996) Some new evidence of old trends: Japanese construction, 1960-1990. Construction Management and Economics, 14(04), 319-23.

Borg, L and Lind, H (2014) Framework for structuring procurement contracts. Construction Economics and Building, 14(04), 71-84.

Bridge, C and Carnemolla, P (2014) An enabling BIM block library: An online repository to facilitate social inclusion in Australia. Construction Innovation, 14(04), 477-92.

Burgett, J M, Perrenoud, A and Smith, J P (2018) Identification and Prioritization of Critical Subject Matter within Mechanical Systems Curriculum in Construction Management Education. International Journal of Construction Education and Research, 14(04), 295–312.

Bwanali, W and Manda, M (2023) The correlation between social resilience and flooding in low-income communities: a case of Mzuzu City, Malawi. International Journal of Disaster Resilience in the Built Environment, 14(04), 495-513.

Cameron, I, Gillan, G and Duff, A R (2007) Issues in the selection of fall prevention and arrest equipment. Engineering, Construction and Architectural Management, 14(04), 363–74.

Chang, J, Jaskula, K, Papadonikolaki, E, Rovas, D and Parlikad, A K (2024) Can blockchain prevent the deterioration of building handover information quality for higher education institutions?. Built Environment Project and Asset Management, 14(04), 509-28.

Chen, C and Zhang, H (2018) Using emotion to evaluate our community: exploring the relationship between the affective appraisal of community residents and the community environment. Architectural Engineering and Design Management, 14(04), 256–71.

Chileshe, N and John Kikwasi, G (2014) Risk assessment and management practices (ramp) within the Tanzania construction industry: Implementation barriers and advocated solutions. International Journal of Construction Management, 14(04), 239-54.

Chmutina, K, Lizarralde, G, von Meding, J and Bosher, L (2023) Standardised indicators for “resilient cities”: the folly of devising a technical solution to a political problem. International Journal of Disaster Resilience in the Built Environment, 14(04), 514-35.

Djebarni, R (1996) The impact of stress in site management effectiveness. Construction Management and Economics, 14(04), 281-93.

Elliott, J W, Perkins, M and Thevenin, M K (2018) Measuring Undergraduate Students’ Construction Education Domain Self-Efficacy, Motivation, and Planned Behavior: Validation of a Concise Survey Instrument. International Journal of Construction Education and Research, 14(04), 235–56.

Emmitt, S (2018) Editorial. Architectural Engineering and Design Management, 14(04), 255.

Eriksson, P E and Laan, A (2007) Procurement effects on trust and control in client-contractor relationships. Engineering, Construction and Architectural Management, 14(04), 387–99.

Espinoza Vigil, A J and Booker, J D (2023) Building national disaster resilience: assessment of ENSO-driven disasters in Peru. International Journal of Disaster Resilience in the Built Environment, 14(04), 423-33.

Fathianpour, A, Babaeian Jelodar, M, Wilkinson, S and Evans, B (2023) Resilient evacuation infrastructure; an assessment of resilience toward natural hazards. International Journal of Disaster Resilience in the Built Environment, 14(04), 536-52.

Fernie, S and Thorpe, A (2007) Exploring change in construction: supply chain management. Engineering, Construction and Architectural Management, 14(04), 319–33.

Forsythe, P and Ding, G (2014) Greenhouse gas emissions from excavation on residential construction sites. Construction Economics and Building, 14(04), 1-10.

Fuentes-Del-Burgo, J and Navarro-Astor, E (2016) What is engineering education for? Listening to the voices of some Spanish building engineers. Journal of Engineering, Design and Technology, 14(04), 897-919.

Goswami, M, Singh, J and Kumar, V (2016) An enterprise based decision support system for engineering aggregate selection: a case study. Journal of Engineering, Design and Technology, 14(04), 851-73.

Greenhalgh, S (2016) The effects of 3D printing in design thinking and design education. Journal of Engineering, Design and Technology, 14(04), 752-69.

Gunarathna, U, Bandara, C S, Dissanayake, R and Munasinghe, H (2023) Tsunami-resilient building guidelines for Sri Lankan coastal belt: a critical review and consolidation based on significant institutional perceptions. International Journal of Disaster Resilience in the Built Environment, 14(04), 453-70.

Handa, V K and Adas, A (1996) Predicting the level of organizational effectiveness: a methodology for the construction firm. Construction Management and Economics, 14(04), 341-452.

Hassan, O A B (2016) An integrated approach to assessing the sustainability of buildings. Journal of Engineering, Design and Technology, 14(04), 835-50.

Imoudu, E W, Godwin, A U and Nita, A K (2014) Preliminary building information modelling adoption model in Malaysia: A strategic information technology perspective. Construction Innovation, 14(04), 408-32.

Johnston, M Guaralda, M and Sawang, S (2014) Sustainable innovation for Queensland's housing design: a case study. Construction Economics and Building, 14(04), 11-31.

Jones, K and Kaluarachchi, Y (2007) Operational factors affecting strategic partnering in UK social housing. Engineering, Construction and Architectural Management, 14(04), 334–45.

Kaçel, S and Lau, B (2018) Louis I. Kahn and Richard Kelly: collaborative design in creation of the luminous environment. Architectural Engineering and Design Management, 14(04), 306–16.

Kaboli, A S and Carmichael, D G (2014) Optimum scraper load time and fleet size for minimum emissions. International Journal of Construction Management, 14(04), 209-26.

Krishnamurthy, A D and Mahesh, G (2024) Stimulation of construction industry output through enhanced efficiency of Indian residential real estate sector. Built Environment Project and Asset Management, 14(04), 562-89.

• Type: Journal Article
• Keywords: conceptual framework; construction industry output; India; residential real estate asset
• ISBN/ISSN:
• URL: https://doi.org/10.1108/BEPAM-04-2023-0079
• Abstract:
  Purpose: In the context of an absence of studies examining the interrelationship between Indian construction industry and residential real estate sector, the study aims to develop and test a conceptual framework to stimulate construction industry through optimisation of housing market in India. The developed conceptual framework lays down a blueprint to assess the interaction between construction industry and housing market in other countries. Design/methodology/approach: Means of stimulation of construction industry by residential real estate sector were identified. Housing market was examined to identify factors constituting consumer-centric delivery and consumer-empowered demand. Supply side of housing market was probed to identify underlying factors stifling housing delivery. The identified factors were put together to form the conceptual framework. A questionnaire was developed and administered to the delivery-side stakeholders of housing market. Findings: The study demonstrates significant correlations between real estate investment-led construction industry output stimulation and consumer-centric residential real estate delivery. The deterrents to consumer-centric housing delivery have been ascertained to be having an impact on time, cost and scope of housing projects. Significant correlations have been ascertained between the deterrents. On the demand-side, skills, awareness and engagement of consumers are strongly correlated with each other. Affordability of housing is rightfully correlated with all the three means of stimulation of construction industry output. Originality/value: Specific to the Indian context, the study presents and validates a novel conceptual framework aimed at stimulation of construction industry output through interventions in housing market. © 2024, Emerald Publishing Limited.

Kumar, G and Nayak, J K (2024) Moderating effect of subsidy policy on intention to purchase residential rooftop solar panel systems. Built Environment Project and Asset Management, 14(04), 626-43.

Kumar, S (2016) Assessment and selection of psychological attributes: design team perspectives. Journal of Engineering, Design and Technology, 14(04), 874-96.

Landgren, M and Jensen, L B (2018) How does sustainability certification affect the design process? Mapping final design projects at an architectural office. Architectural Engineering and Design Management, 14(04), 292–305.

Ling, F and Lim, H L (2007) Foreign firms' financial and economic risk in China. Engineering, Construction and Architectural Management, 14(04), 346–62.

Louw, M P (2016) The adaptive reuse of industrial structures: Revisiting the Thesen Islands power station project in South Africa. Journal of Engineering, Design and Technology, 14(04), 920-40.

Low, S P and Tan, W (1996) Public policies for managing construction quality: the grand strategy of Singapore. Construction Management and Economics, 14(04), 295-309.

Mawed, M (2024) Revolutionizing performance measures and criteria for the facilities management industry in the UAE. Built Environment Project and Asset Management, 14(04), 644-62.

Mortimer, A, Egbelakin, T and Sher, W (2023) Making the case for policy interventions in disaster governance and management in Australia to better support internally displaced people. International Journal of Disaster Resilience in the Built Environment, 14(04), 471-94.

Murphy, M E (2014) Implementing innovation: A stakeholder competency-based approach for BIM. Construction Innovation, 14(04), 433-52.

Nazeer, F S, Kamardeen, I and Hasan, A (2024) Research needs for enhancing pre-occupancy evaluation of buildings. Built Environment Project and Asset Management, 14(04), 529-46.

Nguyen, T S, Mohamed, S and Mostafa, S (2024) Optimising project outcomes in complex environments: empirical insights on agile practices and stakeholder dynamics. Built Environment Project and Asset Management, 14(04), 590-606.

Nigra, M and Dimitrijevic, B (2018) Is radical innovation in architecture crucial to sustainability? Lessons from three Scottish contemporary buildings. Architectural Engineering and Design Management, 14(04), 272–91.

Ogunmakinde, O E, Egbelakin, T and Henderson, R (2023) Evaluation of animal safe places for emergency evacuation in the Hunter Region of New South Wales, Australia. International Journal of Disaster Resilience in the Built Environment, 14(04), 553-76.

Olanipekun, A, Abiola-Falemu, J and Aje, I (2014) Dimensions of organisational culture in quantity surveying firms in Nigeria. Construction Economics and Building, 14(04), 54-70.

Olatunji, E O, Adebimpe, O A and Oladokun, V O (2023) A fuzzy logic approach for measuring flood resilience at community level in Nigeria. International Journal of Disaster Resilience in the Built Environment, 14(04), 434-52.

Olatunji, O and Sher, W (2014) Perspectives on modelling BIM-enabled estimating practices. Construction Economics and Building, 14(04), 32-53.

Oliveira, S, Marco, E and Gething, B (2018) Towards an energy ‘literate’ architecture graduate? UK educators’ and students’ evaluation. Architectural Engineering and Design Management, 14(04), 317–29.

Owusu-Manu, D-G, John, E D, Adesi, M, Badu, E and Love, P E D (2016) Attaining fairness in construction cost consultancy pricing services: A case study in Ghana. Journal of Engineering, Design and Technology, 14(04), 699-712.

Oyewobi, L O, Windapo, A and Rotimi, J O B (2016) Relationship between decision-making style, competitive strategies and organisational performance among construction organisations. Journal of Engineering, Design and Technology, 14(04), 713-38.

Robert, O K, Dansoh, A and Ofori-Kuragu, J K (2014) Reasons for adopting public-private partnership (PPP) for construction projects in Ghana. International Journal of Construction Management, 14(04), 227-38.

Salcedo, R T B and Straub, A (2016) The role of the architect using integrated contracts for social housing renovation projects. Journal of Engineering, Design and Technology, 14(04), 802-17.

Samaras, G D, Gkanas, N I and Vitsa, K C (2014) Assessing risk in dam projects using AHP and ELECTRE I. International Journal of Construction Management, 14(04), 255-66.

Shaker, R A, Elbeltagi, E, Motawa, I, Elmasoudi, I and Elnabwy, M T (2024) Social network analysis for identifying the significant drivers of off-site construction adoption in Egypt. Built Environment Project and Asset Management, 14(04), 607-25.

Shammas-Toma, M, Seymour, D E and Clark, L (1996) The effectiveness of formal quality management systems in achieving the required cover in reinforced concrete. Construction Management and Economics, 14(04), 353-64.

Sibanda, M and van Zyl, R R (2016) Practical electromagnetic compatibility studies of a CubeSat. Journal of Engineering, Design and Technology, 14(04), 770-80.

Tangwe, S L, Simon, M and Meyer, E L (2016) Design of a heat pump water heater performance monitoring system: To determine performance of a split type system. Journal of Engineering, Design and Technology, 14(04), 739-51.

Thevenin, M K and Elliott, J W (2018) The Role of Supportive Others in Academic Decisions; Differences in Construction Management Students by Gender. International Journal of Construction Education and Research, 14(04), 257–76.

Tsai, D M and Chiu, H N (1996) Two heuristics for scheduling multiple projects with resource constraints. Construction Management and Economics, 14(04), 325-40.

Vahanvati, M, McEvoy, D and Iyer-Raniga, U (2023) Inclusive and resilient shelter guide: accounting for the needs of informal settlements in Solomon Islands. International Journal of Disaster Resilience in the Built Environment, 14(04), 577-90.

Vegad, K, Madurwar, M and Ralegaonkar, R (2014) Application of AV-ERP system for on-site project monitoring. Construction Innovation, 14(04), 518-31.

Wang, J, Wang, X, Shou, W and Xu, B (2014) Integrating BIM and augmented reality for interactive architectural visualisation. Construction Innovation, 14(04), 453-76.

Williamson, K C (2018) The Effect of Course Time Compression on Academic Performance in Construction Surveying. International Journal of Construction Education and Research, 14(04), 277–94.

Zarei, F and Nik-Bakht, M (2024) Extending CityGML with public input – social ADE. Built Environment Project and Asset Management, 14(04), 547-61.

Zhang, D and Ho, C H (2024) Distribution fitting and ANOVA test to analyze pavement sensing patterns for condition assessments. Built Environment Project and Asset Management, 14(04), 663-76.

Zhou, W, Heesom, D, Georgakis, P and Tah, J H M (2014) User-centred design for collaborative 4D modelling. Construction Innovation, 14(04), 493-517.