Abstracts – Browse Results

Search or browse again.

Click on the titles below to expand the information about each abstract.
Viewing 16 results ...

Abu Hanipah, A F F and Tahar, K N (2018) Development of the 3D dome model based on a terrestrial laser scanner. International Journal of Building Pathology and Adaptation, 36(02), 122–36.

  • Type: Journal Article
  • Keywords: Modelling; Accuracy; 3D; Scanner; Terrestrial;
  • ISBN/ISSN: 2398-4708
  • URL: https://doi.org/10.1108/IJBPA-05-2017-0024
  • Abstract:
    Laser scanning technique is used to measure and model objects using point cloud data generated laser pulses. Conventional techniques to construct 3D models are time consuming, costly and need more manpower. The purpose of this paper is to assess the 3D model of the Sultan Salahuddin Abdul Aziz Shah Mosque’s main dome using a terrestrial laser scanner. Design/methodology/approach A laser scanner works through line of sight, which indicates that multiple scans need to be taken from a different view to ensure a complete data set. Targets must spread in all directions, and targets should be placed on fixed structures and flat surfaces for the normal scan and fine scan. After the scanning operation, point cloud data from the laser scanner were cleaned and registered before a 3D model could be developed. Findings As a result, the reconstruction of the 3D model was successfully developed. The samples are based on the triangle dimension, curve line, horizontal dimension and vertical dimension at the dome. The standard deviation and accuracy are calculated based on the comparison of the 21 samples taken between the high-resolution and low-resolution scanning data. Originality/value There are many ways to develop the 3D model and based on this study, the less complex ways also produce the best result. The authors implement the different types of dimensions for the 3D model assessment, which have not yet been considered in the past.

Adebisi, E O, Ojo, S O and Alao, O O (2018) Assessment of factors influencing the failure and abandonment of multi-storey building projects in Nigeria. International Journal of Building Pathology and Adaptation, 36(02), 210–31.

Artmann, N, Gyalistras, D, Manz, H and Heiselberg, P (2008) Impact of climate warming on passive night cooling potential. Building Research & Information, 36(02), 28.

Chua, S J L, Zubbir, N B, Ali, A S and Au-Yong, C P (2018) Maintenance of high-rise residential buildings. International Journal of Building Pathology and Adaptation, 36(02), 137–51.

de Bem, D H, Lima, D P B and Medeiros-Junior, R A (2018) Effect of chemical admixtures on concrete’s electrical resistivity. International Journal of Building Pathology and Adaptation, 36(02), 174–87.

Galasiu, A D and Reinhart, C F (2008) Current daylighting design practice: a survey. Building Research & Information, 36(02), 74.

Gorgolewski, M (2008) Designing with reused building components: some challenges. Building Research & Information, 36(02), 88.

Jensen, J O and Gram-Hanssen, K (2008) Ecological modernization of sustainable buildings: a Danish perspective. Building Research & Information, 36(02), 58.

Joseph, A and Hamilton, D K (2008) The Pebble Projects: coordinated evidence-based case studies. Building Research & Information, 36(02), 45.

Kokkonen, A and Vaagaasar, A L (2018) Managing collaborative space in multi-partner projects. Construction Management and Economics, 36(02), 83-95.

Kulkarni, S S, Chapman, C, Shah, H and Edwards, D J (2018) A computational design method for bio-mimicked horizontal axis tidal turbines. International Journal of Building Pathology and Adaptation, 36(02), 188–209.

Loosemore, M and Lim, B T H (2018) Mapping corporate social responsibility strategies in the construction and engineering industry. Construction Management and Economics, 36(02), 67-82.

Odoemena, A T and Horita, M (2018) A strategic analysis of contract termination in public-private partnerships: Implications from cases in Sub-Saharan Africa. Construction Management and Economics, 36(02), 96-108.

Olivieri, H, Seppänen, O and Denis Granja, A (2018) Improving workflow and resource usage in construction schedules through location-based management system. Construction Management and Economics, 36(02), 109-24.

Roberts, C J, Pärn, E A, Edwards, D J and Aigbavboa, C (2018) Digitalising asset management: concomitant benefits and persistent challenges. International Journal of Building Pathology and Adaptation, 36(02), 152–73.

Short, A C (2008) What is 'architectural design research'?. Building Research & Information, 36(02), 195–9.