ARCOM

Search or browse again.

Click on the titles below to expand the information about each abstract.
Viewing 15345 results ...

Afolabi, A, O, Tunji-Olayeni, P, F, Oyeyipo, O, O and Ojelabi, R, A (2017) The Socio-Economics of Women Inclusion in Green Construction . Construction Economics and Building, 17(01), 70-89.

Al Shamsi, S K (2019) Managing construction projects in the United Arab Emirates to gain competitive advantage, Unpublished PhD Thesis, Faculty of Science and Engineering, University of Wolverhampton.

Hosseini, M, R, Chileshe, N, Jepson, J and M,Arashpour (2016) Critical success factors for implementing risk management systems in developing countries . Construction Economics and Building, 16(01), 18-32.

Ibem, E, O, Onyemaechi, P, C.E and yo-Vaughan, K. N. (2018) Project Selection and Transparency Factors in Housing Public-Private Partnerships in Nigeria . Construction Economics and Building, 18(02), 15-40.

Ke, Y, Davis, P and Jefferies, M (2016) A conceptual model of psychological contracts in construction projects . Construction Economics and Building, 16(03), 20-37.

Livesey P, V (2017) Goleman-Boyatzis Model of Emotional Intelligence for Dealing with Problems in Project Management . Construction Economics and Building, 17(01), 20-45.

Panahi, B, Moezzi, E, Preece, C, Zakaria, W, and Rogers, J, (2015) Predictor Role of Profession in Explaining Personal Value Priorities and Conflicts between Construction Stakeholders . Construction Economics and Building, 15(04), 45-62.

Panahi, B, Preece, C, N, Wan, N, and Zakaria, W, N, W. (2016) Personal-organisational value conflicts and job satisfaction of internal construction stakeholders . Construction Economics and Building, 16(01), 1-17.

Paz, J, C, Rozenboim, D, Cuadros, Cano, A, S. Escobar P, J, Juan Camilo Paz, David Rozenboim, Álvaro Cuadros, Sandra Cano, John Escobar (2018) A Simulation-Based Scheduling Methodology for Construction Projects Considering the Potential Impacts of Delay Risks . Construction Economics and Building, 18(02), 41-69.

Peel, J, Ahmed, V and Saboor, S (2020) An investigation of barriers and enablers to energy efficiency retrofitting of social housing in London. Construction Economics and Building, 20(02), 127-149.

Şentop Dümen, A and Tamer Bayazıt, N (2020) Enforcement of acoustic performance assessment in residential buildings and occupant satisfaction. Building Research & Information, 48(08), 866–85.

Çıdık, M S and Boyd, D (2020) “Shared sense of purposefulness”: a new concept to understand the practice of coordinating design in construction. Construction Management and Economics, 38(01), 18–31.

Çınar, S (2020) Construction labour, subcontracting and masculinity: “construction is a man’s job”. Construction Management and Economics, 38(03), 275–90.

Álvares, J S, Costa, D B and Melo, R R S d (2018) Exploratory study of using unmanned aerial system imagery for construction site 3D mapping. Construction Innovation, 18(03), 301–20.

Çıdık, M S (2020) Project Managing the Social Value of Built Assets: A Call for a Focus on Value Manifestation. In: Scott, L and Neilson, C J (Eds.), Proceedings 36th Annual ARCOM Conference, 7-8 September 2020, UK, Association of Researchers in Construction Management, 35-44.

Çıdık, M S, Boyd, D and Thurairajah, N (2017) Ordering in disguise: Digital integration in built-environment practices. Building Research & Information, 45(06), 665-80.

Çoker, G B (1985) Information System for Building Products. Journal of Construction Engineering and Management, 111(04), 411–25.

(Bud) Griffis, F H (1992) Bidding Strategy: Winning over Key Competitors. Journal of Construction Engineering and Management, 118(01), 151–65.

Ó Murchadha, E and Murphy, R (2016) Rethinking Apprenticeship Training for the Construction Industry in Ireland. In: Chan, P W and Neilson, C J (Eds.), Proceedings 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester UK. Association of Researchers in Construction Management, 373–382.

Ökmen , Ö and ÖztaÅŸ, A (2015) Scenario-based evaluation of a cost risk model through sensitivity analysis. Engineering, Construction and Architectural Management, 22(04), 403-23.

Ökmen, & and Öztaş, A (2008) Construction Project Network Evaluation with Correlated Schedule Risk Analysis Model. Journal of Construction Engineering and Management, 134(01), 49–63.

Öz, Ö (2001) Sources of competitive advantage of Turkish construction companies in international markets. Construction Management and Economics, 19(02), 135-44.

Štaube, T, Leemeijer, B, Geipele, S, Kauškale, L, Geipele, I and Jansen, J (2016) Economic and financial rationale for age-friendly housing. Journal of Financial Management of Property and Construction, 21(02), 99-121.

Şentürk, H A and Yazici, G (2004) Case Study: Izmit Domestic and Industrial Water Supply Build–Operate–Transfer Project. Journal of Construction Engineering and Management, 130(03), 449–54.

Ünsal Altuncan, & and Tanyer, A M (2018) Context-Dependent Construction Conflict Management Performance Analysis Based on Competency Theory. Journal of Construction Engineering and Management, 144(12).

A Kassem, M, Khoiry, M A and Hamzah, N (2020) Assessment of the effect of external risk factors on the success of an oil and gas construction project. Engineering, Construction and Architectural Management, 27(09), 2767–93.

Aalto, L, Sirola, P, Kalliomäki-Levanto, T, Lahtinen, M, Ruohomäki, V, Salonen, H and Reijula, K (2019) User-centric work environments in modular healthcare facilities. Engineering, Construction and Architectural Management, 26(06), 1047–62.

Aaron, M A, Mohan, M K and Gangadhar, M (2011) Building relationally integrated value networks (RIVANS). Engineering, Construction and Architectural Management, 18(01), 102–20.

Ab Rani, N I, Ismail, S, Mohamed, Z, Hussain, A H and Ghafourian, K (2018) Local contractors' awareness on competitiveness towards liberalisation and globalisation in the Malaysian construction industry. Journal of Construction in Developing Countries, 23(1), 21-42.

Abadi, A (2014) A study of innovation perception within the construction industry, Unpublished PhD Thesis, Department of Mechanical, Aerospace & Civil Engineering, University of Manchester.

Abadi, M and Sammuneh, M A (2020) Integrating Circular Economy and Constructability Research: An Initial Development of a Lifecycle "Circularity" Assessment Framework and Indicators. In: Scott, L and Neilson, C J (Eds.), Proceedings 36th Annual ARCOM Conference, 7-8 September 2020, UK, Association of Researchers in Construction Management, 516-525.

Abadou, Y, Ghrieb, A, Bustamante, R and Faid, H (2020) Optimization by mixture design approach. Journal of Engineering, Design and Technology , 18(06), 1731–47.

Abadou, Y, Kettab, R and Ghreib, A (2018) Experimental investigation on the carbonation properties of dune sand ceramic waste mortar. Journal of Engineering, Design and Technology, 16(03), 501–16.

Abanda, F H and Tah, J H M (2008) Towards developing a sustainable building technology ontology.. In: Dainty, A (Ed.), Proceedings 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK. Association of Researchers in Construction Management, Vol. 2, 627–36.

Abarinda, J, Kibwami, N and Tutesigensi, A (2019) Towards Improving Schedule Performance of Construction Projects in Uganda with Lean Construction. In: Gorse, C and Neilson, C J (Eds.), Proceedings 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK Association of Researchers in Construction Management, 658-667.

Abbas, N M A (1998) The impact of construction contract models on construction claims in Saudi Arabia. In: Hughes, W (Ed.), Proceedings 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK. Association of Researchers in Construction Management, Vol. 2, 438–46.

Abbas, N M A and Reda, R M (1997) The engineering consultancy profession "analysis and development". In: Stephenson, P (Ed.), Proceedings 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK. Association of Researchers in Construction Management, Vol. 2, 598–606.

Abbasi, S, Taghizade, K and Noorzai, E (2020) BIM-Based Combination of Takt Time and Discrete Event Simulation for Implementing Just in Time in Construction Scheduling under Constraints. Journal of Construction Engineering and Management, 146(12).

Abbasian-Hosseini, S A, Hsiang, S M, Leming, M L and Liu, M (2014) From Social Network to Data Envelopment Analysis: Identifying Benchmarks at the Site Management Level. Journal of Construction Engineering and Management, 140(08).

Abbot, C, Jeong, K and Allen, S (2006) The economic motivation for innovation in small construction companies. Construction Innovation, 6(03), 187–96.

Abbott, C and Allen, S (2004) Exploring how regional construction activity can be supported by community benefit initiatives. In: Khosrowshahi, F (Ed.), Proceedings 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK. Association of Researchers in Construction Management, Vol. 1, 353–61.

Abbott, M and Carson, C (2013) A comparative approach to determining the growth of productivity of the New Zealand construction industry. Australasian Journal of Construction Economics and Building, 13(04), 65-77.

Abd El Halim, A E H O and Haas, R (2004) Process and Case Illustration of Construction Innovation. Journal of Construction Engineering and Management, 130(04), 570–5.

Abd El-Razek, M E, Bassioni, H A and Mobarak, A M (2008) Causes of Delay in Building Construction Projects in Egypt. Journal of Construction Engineering and Management, 134(11), 831–41.

Abd Jamil, A H and Fathi, M S (2018) Contractual challenges for BIM-based construction projects: a systematic review. Built Environment Project and Asset Management, 8(04), 372–85.

Abd Jamil, A H and Fathi, M S (2020) Enhancing BIM-Based Information Interoperability: Dispute Resolution from Legal and Contractual Perspectives. Journal of Construction Engineering and Management, 146(07).

Abdal Noor, B and Yi, S (2018) Review of BIM literature in construction industry and transportation: meta-analysis. Construction Innovation, 18(04), 433–52.

Abdallah, A, Assaf, S and Hassanain, M A (2019) Assessment of the consequences of deficiencies in design documents in Saudi Arabia. Architectural Engineering and Design Management, 15(04), 282–96.

Abdallah, M, El-Rayes, K and Liu, L (2016) Minimizing Upgrade Cost to Achieve LEED Certification for Existing Buildings. Journal of Construction Engineering and Management, 142(02).

Abdallah, M, El-Rayes, K and Liu, L (2013) Operational Performance of Sustainable Measures in Public Buildings. Journal of Construction Engineering and Management, 139(12).

Abdel Aziz, A M (2008) Minimum performance bounds for evaluating contractors performance during construction of highway pavement projects. Construction Management and Economics, 26(05), 507-29.

Abdel Aziz, A M (2007) Successful Delivery of Public-Private Partnerships for Infrastructure Development. Journal of Construction Engineering and Management, 133(12), 918–31.

Abdel-Monem, M and Hegazy, T (2013) Enhancing Construction As-Built Documentation Using Interactive Voice Response. Journal of Construction Engineering and Management, 139(07), 895–8.

Abdel-Razek, R and McCaffer, R (1987) A change in the UK construction industry structure: implications for estimating. Construction Management and Economics, 5(03), 227-42.

Abdel-Razek, R H (1997) How Construction Managers Would Like Their Performance to Be Evaluated. Journal of Construction Engineering and Management, 123(03), 208–13.

Abdel-Razek, R H (1998) Quality Improvement in Egypt: Methodology and Implementation. Journal of Construction Engineering and Management, 124(05), 354–60.

Abdel-Wahab, M and Vogl, B (2011) Trends of productivity growth in the construction industry across Europe, US and Japan. Construction Management and Economics, 29(06), 635–44.

Abdel-Wahab, M S (2008) An examination of the relationship between skills development and productivity in the construction industry, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Abdel-Wahab, M S, Dainty, A R J and Ison, S G (2006) How productive is the construction industry?. In: Boyd, D (Ed.), Proceedings 22nd Annual ARCOM Conference, 4-6 September 2006 Birmingham, UK. Association of Researchers in Construction Management, Vol. 1, 9–19.

Abdel-Wahab, M S, Dainty, A R J and Ison, S G (2008) Insights into the overlap between ConstructionSkills' footprint and other sector skills councils. In: Dainty, A (Ed.), Proceedings 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK. Association of Researchers in Construction Management, Vol. 1, 83–91.

Abdel-Wahab, M S, Dainty, A R J, Ison, S G, Bowen, P and Hazlehurst, G (2008) Trends of skills and productivity in the UK construction industry. Engineering, Construction and Architectural Management, 15(04), 372–82.

Abdel-Wahab, M S, Moore, D R, Gibbons-Woods, D, Kearny, G and Pirie, T (2009) An evaluation framework for training: a case study in the northeast of scotland. In: Dainty, A R J (Ed.), Proceedings 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK. Association of Researchers in Construction Management, Vol. 1, 627–34.

Abdelaty, A, Jeong, H D, Dannen, B and Todey, F (2016) Enhancing life cycle cost analysis with a novel cost classification framework for pavement rehabilitation projects. Construction Management and Economics, 34(10), 724-36.

Abdelgawad, M and Fayek, A R (2012) Comprehensive Hybrid Framework for Risk Analysis in the Construction Industry Using Combined Failure Mode and Effect Analysis, Fault Trees, Event Trees, and Fuzzy Logic. Journal of Construction Engineering and Management, 138(05), 642–51.

Abdelgawad, M and Fayek, A R (2011) Fuzzy Reliability Analyzer: Quantitative Assessment of Risk Events in the Construction Industry Using Fuzzy Fault-Tree Analysis. Journal of Construction Engineering and Management, 137(04), 294–302.

Abdelgawad, M and Fayek, A R (2010) Risk Management in the Construction Industry Using Combined Fuzzy FMEA and Fuzzy AHP. Journal of Construction Engineering and Management, 136(09), 1028–36.

Abdelhamid, T S and Everett, J G (2000) Identifying Root Causes of Construction Accidents. Journal of Construction Engineering and Management, 126(01), 52–60.

Abdelhamid, T S and Everett, J G (2002) Physiological Demands during Construction Work. Journal of Construction Engineering and Management, 128(05), 427–37.

Abdelhamid, T S and Everett, J G (1999) Physiological Demands of Concrete Slab Placing and Finishing Work. Journal of Construction Engineering and Management, 125(01), 47–52.

Abdelhamid, T S and Everett, J G (1999) Time Series Analysis for Construction Productivity Experiments. Journal of Construction Engineering and Management, 125(02), 87–95.

Abdelmohsen, A Z and El-Rayes, K (2016) Optimal Trade-Offs between Construction Cost and Traffic Delay for Highway Work Zones. Journal of Construction Engineering and Management, 142(07).

Abdelrahman, M, Zayed, T and Elyamany, A (2008) Best-Value Model Based on Project Specific Characteristics. Journal of Construction Engineering and Management, 134(03), 179–88.

AbdelRazig, Y A and Chang, L (2000) Intelligent Model for Constructed Facilities Surface Assessment. Journal of Construction Engineering and Management, 126(06), 422–32.

Abdessalem, J, Fakhreddine, D, Said, A and Mohamed, H (2014) Shape optimization for a hyperelastic axisymmetric structure. Journal of Engineering, Design and Technology, 12(02), 177-94.

Abdi, A, Lind, H and Birgisson, B (2013) Payment mechanisms for winter road maintenance services. Australasian Journal of Construction Economics and Building, 13(04), 18-31.

Abdirad, H (2017) Metric-based BIM implementation assessment: a review of research and practice. Architectural Engineering and Design Management, 13(01), 52–78.

Abdirad, H and Dossick, C S (2019) Normative and descriptive models for COBie implementation: discrepancies and limitations. Engineering, Construction and Architectural Management, 26(08), 1820–36.

Abdirad, H and Dossick, C S (2019) Restructuration of architectural practice in integrated project delivery (IPD): two case studies. Engineering, Construction and Architectural Management, 26(01), 104–17.

Abdirad, H and Nazari, A (2015) Barriers to effective implementation of quality management systems in public design projects in Iran. Architectural Engineering and Design Management, 11(06), 457-74.

Abdirad, H, Dossick, C S, Johnson, B R and Migliaccio, G (2021) Disruptive information exchange requirements in construction projects: perception and response patterns. Building Research & Information, 49(02), 161–78.

Abdollahipour, S, Jeong, D H S, Burman, R R and Gunsaulis, F (2012) Performance Assessment of On-Grade Horizontal Directional Drilling. Journal of Construction Engineering and Management, 138(03), 458–68.

Abdou, A, Lewis, J and Alzarooni, S (2004) Modelling risk for construction cost estimating and forecasting: a review. In: Khosrowshahi, F (Ed.), Proceedings 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK. Association of Researchers in Construction Management, Vol. 1, 141–52.

Abdou, A, Lewis, J and Radaideh, M (2003) An internet-based decision support system for healthcare project appraisal: a conceptual proposal. Construction Innovation, 3(03), 145–55.

Abduh, M (2000) Utility assessment of electronic networking technologies for design-build projects, Unpublished PhD Thesis, School of Civil Engineering, Purdue University.

Abduh, M and Skibniewski, M J (2004) Electronic networking technologies in construction. Journal of Construction Research, 5(01), 17–42.

Abdul Majid, M Z (1997) Non-excusable delays in construction, Unpublished PhD Thesis, Department of Civil Engineering, Loughborough University.

Abdul Mujeebu, M and Ashraf, N (2020) Impact of location and deadband on energy performance of nano aerogel glazing for office building in Saudi Arabia. Building Research & Information, 48(06), 645–58.

Abdul Nabi, M, El-adaway, I H, Fayek, S, Howell, C and Gambatese, J (2020) Contractual Guidelines for Construction Safety–Related Issues under Design–Build Standard Forms of Contract. Journal of Construction Engineering and Management, 146(07).

Abdul-Aziz, A (2001) Unraveling of BOT Scheme: Malaysia's Indah Water Konsortium. Journal of Construction Engineering and Management, 127(06), 457–60.

Abdul-Aziz, A R (2009) Locational factors and foreign market-entry considerations for Malaysian contractors. Australasian Journal of Construction Economics and Building, 9(01), 27-36.

Abdul-Aziz, A R, Jaafar, M, Enshassi, A and Mohamed-Salleh, M N (2008) Does vocational training meet the construction industry needs in Malaysia?: Feedback from ex-trainees of the basic electrical wiring course from one training institution. Journal of Engineering, Design and Technology, 6(03), 258–68.

Abdul-Aziz, A-R (1998) Adapting procurement practices to suit a host country as a probable localization tactic. Journal of Construction Procurement, 4(01), 45–58.

Abdul-Aziz, A-R (2001) Clandestine foreign site operatives in Japan: a focus on Malaysians. Journal of Construction Procurement, 7(01), 51–72.

Abdul-Aziz, A-R (2003) Construction Entrepreneurship in Terengganu, Malaysia: An Exploration of the Influential Forces. Journal of Engineering, Design and Technology, 1(01), 15–41.

Abdul-Aziz, A-R (2012) Control mechanisms exercised in Malaysian housing public-private partnerships. Construction Management and Economics, 30(01), 37–55.

Abdul-Aziz, A-R (1995) Examination of the eclectic paradigm as applied to international contracting: with emphasis on the internalization dimension. Engineering, Construction and Architectural Management, 2(02), 105–20.

Abdul-Aziz, A-R (2001) Foreign workers and labour segmentation in Malaysia's construction industry. Construction Management and Economics, 19(08), 789-98.

Abdul-Aziz, A-R (1991) Global strategies of construction firms, Unpublished PhD Thesis, Department of Construction Management and Engineering, University of Reading.

Abdul-Aziz, A-R (1994) Global strategies: a comparison between Japanese and American construction firms. Construction Management and Economics, 12(06), 473-84.

Abdul-Aziz, A-R and Awil, A-U (2010) Locational considerations and international Malaysian housing developers. Journal of Financial Management of Property and Construction, 15(01), 7–20.

Abdul-Aziz, A-R and Hussin, A-A (2003) Construction Safety in Malaysia: A Review of Industry Performance and Outlook for the Future. Journal of Construction Research, 4(02), 141–53.

Abdul-Aziz, A-R and Tan, A C N (1998) GATT, GATS and the global construction industry. Engineering, Construction and Architectural Management, 5(01), 31–7.

Abdul-Aziz, A-R and Wong, S S (2010) Competitive assets of Malaysian international contractors. Journal of Financial Management of Property and Construction, 15(02), 176–89.

Abdul-Aziz, A-R and Wong, S S (2010) Exploring the internationalization of Malaysian contractors: the international entrepreneurship dimension. Construction Management and Economics, 28(01), 61.

Abdul-Aziz, A-R and Wong, S-S (2011) Business networks and internationalisation of contractors from developing countries: an explorative study. Engineering, Construction and Architectural Management, 18(03), 282–96.

Abdul-Aziz, A-R, Jaafar, M and Hussin, A A (2007) Are government-linked construction companies in Malaysia still valid? The indigenous contractors' perspective. Construction Management and Economics, 25(10), 1009–19.

Abdul-Aziz, A-R, Ngau, D P, Lim, Y M and Nuruddin, A R (2011) Internationalization of Malaysian quantity surveying firms: exploring the best fit models. Construction Management and Economics, 29(01), 49–58.

Abdul-Aziz, A-R, Yi, H S and Jaafar, M (2007) Impact of firm characteristics on the value of resources for Malaysian private housing developers. Journal of Financial Management of Property and Construction, 12(02), 95–106.

Abdul-Aziz, A, Suresh, S and Renukappa, S (2020) The conundrum of professionalising building surveying in Malaysia. International Journal of Building Pathology and Adaptation, 38(05), 621–34.

Abdul-Hadi, N, Al-Sudairi, A and Alqahtani, S (2005) Prioritizing barriers to successful business process re-engineering (BPR) efforts in Saudi Arabian construction industry. Construction Management and Economics, 23(03), 305-15.

Abdul-Lateef, O A (2010) Quantitative analysis of criteria in university building maintenance in Malaysia. Australasian Journal of Construction Economics and Building, 10(03), 51-61.

Abdul-Rahman, H (1996) Some observations on the management of quality amongst construction professionals in the UK. Construction Management and Economics, 14(06), 485-96.

Abdul-Rahman, H (1995) The cost of non-conformance during a highway project: a case study. Construction Management and Economics, 13(01), 23-32.

Abdul-Rahman, H and Alidrisyi, M N (1994) A perspective of material management practices in a fast developing economy: the case of Malaysia. Construction Management and Economics, 12(05), 413-22.

Abdul-Rahman, H, Berawi, M A, Berawi, A R, Mohamed, O, Othman, M and Yahya, I A (2006) Delay Mitigation in the Malaysian Construction Industry. Journal of Construction Engineering and Management, 132(02), 125–33.

Abdul-Rahman, H, Yahya, I A, Berawi, M A and Wah, L W (2008) Conceptual delay mitigation model using a project learning approach in practice. Construction Management and Economics, 26(01), 15–27.

Abdul-Rashid, I, Bassioni, H and Bawazeer, F (2007) Factors affecting safety performance in large construction contractors in Egypt. In: Boyd, D (Ed.), Proceedings 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK. Association of Researchers in Construction Management, Vol. 2, 661–70.

AbdulAzeez, A D, Etubi, U and Umar, B (2019) An assessment of multi-skilling in addressing skills shortage in Nigerian construction firms. African Journal of Built Environment Research, 3(1), 1-13.

Abdulaziz, M J (2010) Buildability factors influencing formwork labour productivity of isolated foundations. Journal of Engineering, Design and Technology, 8(03), 274–95.

Abdullah, A H, Yaman, S K, Mohammad, H and Hassan, P F (2018) Construction manager’s technical competencies in Malaysian construction projects. Engineering, Construction and Architectural Management, 25(02), 153–77.

Abdullah, A M and Vickridge, I G (2000) The extent of multi-project management implementation in the UK construction industry. In: Akintoye, A (Ed.), Proceedings 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK. Association of Researchers in Construction Management, Vol. 1, 137–46.

Abdullah, M R and Egbu, C (2010) Selection criteria framework for choosing industrialized building systems for housing projects. In: Egbu, C (Ed.), Proceedings 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK. Association of Researchers in Construction Management, Vol. 2, 1131–9.

Abdullah, M R and Egbu, C (2011) The application of Analytical Hierarchy Process (AHP) as a decision tool in choosing the type of Industrialised Building System (IBS) for housing projects. In: Egbu, C and Lou, E C W (Eds.), Proceedings 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK. Association of Researchers in Construction Management, 555–62.

Abdullah, R Z (1988) Integrated systems for site management, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Abdullahi, B, Ibrahim, Y M, Ibrahim, A and Bala, K (2019) Development of e-tendering evaluation system for Nigerian public sector. Journal of Engineering, Design and Technology , 18(01), 122–49.

Abdullahi, U, Bustani, S A, Hassan, A and Rotimi, F E (2019) Assessing quality management practice in Nigerian construction industry. Journal of Construction Business and Management, 3(2), 17-25.

Abediniangerabi, B, Shahandashti, S M, Ahmadi, N and Ashuri, B (2017) Empirical Investigation of Temporal Association between Architecture Billings Index and Construction Spending Using Time-Series Methods. Journal of Construction Engineering and Management, 143(10).

Abeid, J and Arditi, D (2003) Photo-net: an integrated system for controlling construction progress. Engineering, Construction and Architectural Management, 10(03), 162–71.

Abeid, J and Arditi, D (2002) Time-Lapse Digital Photography Applied to Project Management. Journal of Construction Engineering and Management, 128(06), 530–5.

Abejide, O S (1997) Solid soilcrete blocks for low-cost buildings: a Nigerian case study. Building Research & Information, 25(02), 115–9.

Abela, A, Hoxley, M, McGrath, P and Goodhew, S (2013) A comparative analysis of implementation of the Energy Performance of Buildings Directive in the Mediterranean. International Journal of Law in the Built Environment, 5(03), 222-40.

Abeysekera, V (1997) A strategy for managing brickwork in Sri Lanka, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Abeysekera, V and McLean, C (2001) Project success and relationships from a stakeholder perspective: a pilot study. In: Akintoye, A (Ed.), Proceedings 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK. Association of Researchers in Construction Management, Vol. 1, 485–94.

Abeysekera, W V K M (1997) A strategy for managing brickwork in Sri Lanka, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Abeysekera, W V K M and Thorpe, A (1997) Standardisation or non-standardisation? The case of brickwork in Sri Lanka. In: Stephenson, P (Ed.), Proceedings 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK. Association of Researchers in Construction Management, Vol. 1, 173–82.

Abeysinghe, G and Urand, D (1999) Why Use Enactable Models of Construction Processes?. Journal of Construction Engineering and Management, 125(06), 437–47.

Abid, M S (1995) Reconstruction for low-income communities in earthquake zones: an investigation for the implementation of community-managed housing reconstruction programmes in low-income countries located in earthquakes zones, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Abidali, A F (1990) A methodology for predicting company failure in the construction industry, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Abidali, A F and Harris, F C (1995) A methodology for predicting company failure in the construction industry. Construction Management and Economics, 13(03), 189-96.

Abidel-Razek, R H (1998) Factors affecting construction quality in Egypt: identification and relative importance. Engineering, Construction and Architectural Management, 5(03), 220–7.

Abidin, N Z (2005) Using value management to improve the consideration of sustainability within construction, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Abidin, N Z and Pasquire, C L (2005) Delivering sustainability through value management: Concept and performance overview. Engineering, Construction and Architectural Management, 12(02), 168–80.

Abidin, N Z, Adros, N A and Hassan, H (2014) Competitive strategy and performance of quantity surveying firms in Malaysia. Journal of Construction in Developing Countries, 19(2), 15-32.

Abidin, N Z, Yusof, N A and Othman, A A E (2013) Enablers and challenges of a sustainable housing industry in Malaysia. Construction Innovation, 13(01), 10-25.

Abisuga, A, O, Famakin, I, O and Oshodi, O, S (2016) Educational building conditions and the health of users . Construction Economics and Building, 16(04), 19-34.

Abisuga, O A, Ogungbemi, A O, Akinpelu, A A and Oshodi, O S (2017) Assessment of building maintenance projects success factors in Lagos, Nigeria. Journal of Construction Business and Management, 1(1), 29-38.

Aboagye-Nimo E, Raiden A, King A and Tietze S (2013) A safety culture shaped by common sense. In: Smith, S D and Ahiaga-Dagbui, D D (Eds.), Proceedings 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK, Association of Researchers in Construction Management, 323–333.

Aboagye-Nimo, E and Raidén, A (2019) Challenging Standardisation by Embracing Ambiguities of Site Safety: The Case of Micro Construction Firms. In: Gorse, C and Neilson, C J (Eds.), Proceedings 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK Association of Researchers in Construction Management, 546-555.

Aboagye-Nimo, E and Raiden, A (2016) Introducing Site Sense: Comparing Situated Knowledge in Construction to Coalmining. In: Chan, P W and Neilson, C J (Eds.), Proceedings 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester UK. Association of Researchers in Construction Management, 467–476.

Aboagye-Nimo, E, Piroozfar, P, Wood. H and Madgwick, D (2017) The Impact Of Thermal Imaging On Users' Perception Of Energy Consumption: The Round Hill Project . In: Chan, P W and Neilson, C J (Eds.), Proceedings 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK. Association of Researchers in Construction Management, 279–288.

Aboagye-Nimo, E, Raiden, A and King, A (2014) Understanding the role of local safety groups in managing safety practices between micro construction firms and principal contractors. In: Raiden, A and Aboagye-Nimo, E (Eds.), Proceedings 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK, Association of Researchers in Construction Management, 381–90.

Aboagye-Nimo, E, Raiden, A and Tietze, S (2011) Investigating good health and safety practices in small construction firms in the United Kingdom. In: Egbu, C and Lou, E C W (Eds.), Proceedings 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK. Association of Researchers in Construction Management, 289–98.

Aboagye-Nimo, E, Raiden, A, Tietze, S and King, A (2012) The use of experience and situated knowledge in ensuring safety among workers of small construction firms. In: Smith, S.D (Ed.), Proceedings 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK. Association of Researchers in Construction Management, 413–22.

Aboagye-Nimo, E, Wood, H and Collison, J (2019) Complexity of women’s modern-day challenges in construction. Engineering, Construction and Architectural Management, 26(11), 2550–65.

AboMoslim, S and Russell, A (2014) Screening design and construction technologies of skyscrapers. Construction Innovation, 14(03), 307-45.

Aboshia, A M A, Rahmat, R A, Zain, M F M and Ismail, A (2017) Enhancing mortar strengths by ternary geopolymer binder of metakaolin, slag, and palm ash. International Journal of Building Pathology and Adaptation, 35(05), 438–55.

Abotaleb, I S and El-adaway, I H (2017) Construction Bidding Markup Estimation Using a Multistage Decision Theory Approach. Journal of Construction Engineering and Management, 143(01).

Abotaleb, I S and El-adaway, I H (2018) First Attempt Toward a Holistic Understanding of the Interdependent Rippled Impacts Associated with Out-of-Sequence Work in Construction Projects: System Dynamics Modeling Approach. Journal of Construction Engineering and Management, 144(09).

Abouhamad, M and Zayed, T (2019) Risk-Based Asset Management Framework for Subway Systems. Journal of Construction Engineering and Management, 145(11).

AbouRizk, S (2010) Role of Simulation in Construction Engineering and Management. Journal of Construction Engineering and Management, 136(10), 1140–53.

AbouRizk, S and Mather, K (2000) Simplifying Simulation Modeling through Integration with 3D CAD. Journal of Construction Engineering and Management, 126(06), 475–83.

AbouRizk, S and Shi, J (1994) Automated Construction‐Simulation Optimization. Journal of Construction Engineering and Management, 120(02), 374–85.

AbouRizk, S M and Dozzi, S P (1993) Application of Computer Simulation in Resolving Construction Disputes. Journal of Construction Engineering and Management, 119(02), 355–73.

AbouRizk, S M and Halpin, D W (1990) Probabilistic Simulation Studies for Repetitive Construction Processes. Journal of Construction Engineering and Management, 116(04), 575–94.

AbouRizk, S M and Halpin, D W (1992) Statistical Properties of Construction Duration Data. Journal of Construction Engineering and Management, 118(03), 525–44.

AbouRizk, S M and Wales, R J (1997) Combined Discrete-Event/Continuous Simulation for Project Planning. Journal of Construction Engineering and Management, 123(01), 11–20.

AbouRizk, S M, Fayek, A R and Al-Hussein, M (2017) The University of Alberta’s Hole School of Construction Engineering: 25 Years of Impact and Innovation. Journal of Construction Engineering and Management, 143(09).

AbouRizk, S M, Halpin, D W and Wilson, J R (1994) Fitting Beta Distributions Based on Sample Data. Journal of Construction Engineering and Management, 120(02), 288–305.

AbouRizk, S M, Halpin, D W and Wilson, J R (1991) Visual Interactive Fitting of Beta Distributions. Journal of Construction Engineering and Management, 117(04), 589–605.

AbouRizk, S, Halpin, D, Mohamed, Y and Hermann, U (2011) Research in Modeling and Simulation for Improving Construction Engineering Operations. Journal of Construction Engineering and Management, 137(10), 843–52.

AbouRizk, S, Knowles, P and Hermann, U R (2001) Estimating Labor Production Rates for Industrial Construction Activities. Journal of Construction Engineering and Management, 127(06), 502–11.

Abowitz, D A and Toole, T M (2010) Mixed Method Research: Fundamental Issues of Design, Validity, and Reliability in Construction Research. Journal of Construction Engineering and Management, 136(01), 108–16.

Abraham, D M and Dickinson, R J (1998) Disposal Costs for Environmentally Regulated Facilities: LCC Approach. Journal of Construction Engineering and Management, 124(02), 146–54.

Abraham, D M and Yeh, M H J (1999) Breakwater construction: an effective method for industrial waste utilization. Engineering, Construction and Architectural Management, 6(02), 145–54.

Abraham, D M, Wirahadikusumah, R, Short, T J and Shahbahrami, S (1998) Optimization Modeling for Sewer Network Management. Journal of Construction Engineering and Management, 124(05), 402–10.

Abrahams, G (2017) Constructing definitions of sustainable development. Smart and Sustainable Built Environment, 6(01), 34-47.

Abrahams, G (2017) Revealing and exploring the insider/outsider role of the building control officer in England. Architectural Engineering and Design Management, 13(04), 278–90.

Abreu, M M d and Lordsleem Jr, A C (2019) Aluminum formwork system: loss and productivity. Built Environment Project and Asset Management, 9(05), 616–27.

Abrishami, S, Goulding, J, Pour, R F and Ganah, A (2015) Virtual generative BIM workspace for maximising AEC conceptual design innovation: A paradigm of future opportunities. Construction Innovation, 15(01), 24-41.

Abu Alqumboz, M (2014) Challenges to interorganisational learning in learning networks: implications for practice, Unpublished PhD Thesis, Department of Mechanical, Aerospace & Civil Engineering, University of Manchester.

Abu Bakar, R (1998) The management practices and organisational culture of large Malaysian construction contractors, Unpublished PhD Thesis, Department of Construction Management and Engineering, University of Reading.

Abu Dabous, S and Alkass, S (2008) Decision support method for multi-criteria selection of bridge rehabilitation strategy. Construction Management and Economics, 26(08), 883–93.

Abu El-Maaty, A E, El-Kholy, A M and Akal, A Y (2017) Modeling schedule overrun and cost escalation percentages of highway projects using fuzzy approach. Engineering, Construction and Architectural Management, 24(05), 809-27.

Abu Hanipah, A F F and Tahar, K N (2018) Development of the 3D dome model based on a terrestrial laser scanner. International Journal of Building Pathology and Adaptation, 36(02), 122–36.

Abu Samra, S, Ahmed, M, Hammad, A and Zayed, T (2018) Multiobjective Framework for Managing Municipal Integrated Infrastructure. Journal of Construction Engineering and Management, 144(01).

Abu-Shabeen, N N (2008) Development of multi-criteria decision analysis models for bidding and contractor selection, Unpublished PhD Thesis, School of the Built Environment, Edinburgh Napier University.

Abu‐Hijleh, S F and Ibbs, C W (1989) Schedule‐Based Construction Incentives. Journal of Construction Engineering and Management, 115(03), 430–43.

Abu‐Hijleh, S F and Ibbs, C W (1993) Systematic Automated Management Exception Reporting. Journal of Construction Engineering and Management, 119(01), 87–104.

Abubakar, A (1992) A quantitative approach to cost monitoring and control of construction projects, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Abubakar, M, Abdullahi, M and Bala, K (2018) Analysis of the causality links between the growth of the construction industry and the growth of the Nigerian economy. Journal of Construction in Developing Countries, 23(1), 103-13.

Abubakar, M, Zailani, B M, Abdullahi, M and Dodo, M (2021) Skills and competencies for survival in the modern construction industry: students' perspective in Nigeria. African Journal of Built Environment Research, 5(1), 61-76.

Abubakar, S Y (1998) Investigation of factors affecting rural road maintenance: the case of Sokoto State, Nigeria, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Abubaker, A E, Greenwood, D and Osborne, A (2008) A study of project planning on Libyan construction projects. In: Dainty, A (Ed.), Proceedings 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK. Association of Researchers in Construction Management, Vol. 2, 789–98.

Abudayyeh, O (2003) Undergraduate Research Mentoring Model in Construction Engineering and Management. Journal of Construction Engineering and Management, 129(01), 65–69.

Abudayyeh, O Y and Rasdof, W J (1991) Design of Construction Industry Information Management Systems. Journal of Construction Engineering and Management, 117(04), 698–715.

Abudayyeh, O, Dibert-DeYoung, A and Jaselskis, E (2004) Analysis of Trends in Construction Research: 1985–2002. Journal of Construction Engineering and Management, 130(03), 433–9.

Abudayyeh, O, Federicks, T, Palmquist, M and Torres, H N (2003) Analysis of Occupational Injuries and Fatalities in Electrical Contracting Industry. Journal of Construction Engineering and Management, 129(02), 152–8.

Abudayyeh, O, Russell, J, Johnston, D and Rowings, J (2000) Construction Engineering and Management Undergraduate Education. Journal of Construction Engineering and Management, 126(03), 169–75.

Abuelmaatti, A and Ahmed, V (2010) The potential of collaborative environments implementation in small and medium enterprises for the construction industry. In: Egbu, C (Ed.), Proceedings 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK. Association of Researchers in Construction Management, Vol. 1, 663–72.

Abuharris, A and Ruddock, L (2005) Land-use planning and sustainable tourism development in Libya. In: Khosrowshahi, F (Ed.), Proceedings 21st Annual ARCOM Conference, 7-9 September 2005, London, UK. Association of Researchers in Construction Management, Vol. 2, 665–74.

Abuimara, T, O’Brien, W, Gunay, B and Carrizo, J S (2019) Towards occupant-centric simulation-aided building design: a case study. Building Research & Information, 47(08), 866–82.

Abukhder, J and Munns, A K (2003) Attributing management problems on construction projects to project information. In: Greenwood, D J (Ed.), Proceedings 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK. Association of Researchers in Construction Management, Vol. 2, 543–52.

Abulfatih, B M (2000) Project manager's effectiveness in productivity of Bahrain's construction industry, Unpublished PhD Thesis, Department of Construction Management and Engineering, University of Reading.

Abunyewah, M, Gajendran, T, Maund, K and Okyere, S A (2019) Linking information provision to behavioural intentions. International Journal of Disaster Resilience in the Built Environment, 11(01), 100–18.

Abuwarda, Z and Hegazy, T (2016) Flexible Activity Relations to Support Optimum Schedule Acceleration. Journal of Construction Engineering and Management, 142(11).

Abuzeinab, A, Arif, M, Kulonda, D J and Awuzie, B O (2016) Green business models transformation: Evidence from the UK construction sector. Built Environment Project and Asset Management, 6(05), 478-90.

Abuzeinab, A, Arif, M, Qadri, M A and Kulonda, D (2018) Green business models in the construction sector: An analysis of outcomes and benefits. Construction Innovation, 18(01), 20-42.

Acar, E and Göç, Y (2011) Prediction of risk perception by owners’ psychological traits in small building contractors. Construction Management and Economics, 29(08), 841–52.

Acar, E and Yalçın, N (2019) Task-related pro-environmental behaviours of architectural designers: LEED-based evidence from Turkey. Architectural Engineering and Design Management, 15(02), 121–40.

Acar, E, Koçak, I, Sey, Y and Arditi, D (2005) Use of information and communication technologies by small and medium-sized enterprises (SMEs) in building construction. Construction Management and Economics, 23(07), 713-22.

Acar, E, Wall, J, McNamee, F, Carney, M and Öney-Yazici, E (2008) Innovative safety management training through e-learning. Architectural Engineering and Design Management, 4(03), 239–50.

Acharya, N K, Lee, Y D and Im, H M (2006) Conflicting factors in construction projects: Korean perspective. Engineering, Construction and Architectural Management, 13(06), 543–66.

Acharya, N K, Lee, Y-D and Im, H-M (2006) Design errors: tragic for the clients. Journal of Construction Research, 7(01), 177–90.

Acheamfour, V K, Kissi, E and Adjei-Kumi, T (2019) Ascertaining the impact of contractors pre-qualification criteria on project success criteria. Engineering, Construction and Architectural Management, 26(04), 618–32.

Acheamfour, V K, Kissi, E, Adjei-Kumi, T and Adinyira, E (2019) Review of empirical arguments on contractor pre-qualification criteria. Journal of Engineering, Design and Technology , 18(01), 70–83.

Achour, N, Pantzartzis, E, Pascale, F and Price, A D F (2015) Integration of resilience and sustainability: from theory to application. International Journal of Disaster Resilience in the Built Environment, 6(03), 347-62.

Ackerly, K and Brager, G (2013) Window signalling systems: control strategies and occupant behaviour. Building Research & Information, 41(03), 342-60.

Acre, F and Wyckmans, A (2015) The impact of dwelling renovation on spatial quality: The case of the Arlequin neighbourhood in Grenoble, France. Smart and Sustainable Built Environment, 4(03), 268-309.

Adabre, M A and Chan, A P (2020) Towards a sustainability assessment model for affordable housing projects: the perspective of professionals in Ghana. Engineering, Construction and Architectural Management, 27(09), 2523–51.

Adafin, J, Rotimi, J O and Wilkinson, S (2016) Risk impact assessments in project budget development: architects’ perspectives. Architectural Engineering and Design Management, 12(03), 189–204.

Adafin, J, Rotimi, J O B and Wilkinson, S (2015) Why do the design stage elemental cost plan and final tender sum differ in New Zealand?. Journal of Financial Management of Property and Construction, 20(02), 116-31.

Adafin, J, Rotimi, J O B, Wilkinson, S and Mbachu, J (2019) An Assessment of Risk Factors Impacting Budget Variability in New Zealand Commercial Construction Projects. In: Gorse, C and Neilson, C J (Eds.), Proceedings 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK Association of Researchers in Construction Management, 44-53.

Adam, A and Lindahl, G (2017) Applying the dynamic capabilities framework in the case of a large public construction client. Construction Management and Economics, 35(07), 420-31.

Adam, A, Gluch, P and Julin, J (2014) Using actor-network theory to understand knowledge sharing in an architecture firm. In: Raiden, A and Aboagye-Nimo, E (Eds.), Proceedings 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK, Association of Researchers in Construction Management, 1235–44.

Adam, A, Josephson, P-E B and Lindahl, G (2017) Aggregation of factors causing cost overruns and time delays in large public construction projects: Trends and implications. Engineering, Construction and Architectural Management, 24(03), 393-406.

Adami, V S, Verschoore, J R and Antunes Junior, J A V (2019) Effect of Relational Characteristics on Management of Wind Farm Interorganizational Construction Projects. Journal of Construction Engineering and Management, 145(03).

Adams, D and Hastings, E M (2000) Making urban renewal pay: the Hong Kong experience. Journal of Financial Management of Property and Construction, 5(01), 79–84.

Adams, F K (2006) Expert elicitation and Bayesian analysis of construction contract risks: an investigation. Construction Management and Economics, 24(01), 81-96.

Adams, J D and Brown, A W (2002) Project management in public sector construction projects: assessing value for money. Journal of Construction Procurement, 8(02), 84–100.

Adams, O (1997) Contractor development in Nigeria: perceptions of contractors and professionals. Construction Management and Economics, 15(01), 95-108.

Adamtey, S A (2021) A Case Study Performance Analysis of Design-Build and Integrated Project Delivery Methods. International Journal of Construction Education and Research, 17(01), 68–84.

Adamtey, S and Onsarigo, L (2018) Analysis of pipe-bursting construction risks using probability-impact model. Journal of Engineering, Design and Technology, 16(03), 461–77.

Adamu, N, Zubairu, I K, Ibrahim, Y M and Ibrahim, A M (2011) Evaluating the impact of product diversification on financial performance of selected nigerian construction firms. Journal of Construction in Developing Countries, 16(2), 91-114.

Adan, H and Fuerst, F (2015) Modelling energy retrofit investments in the UK housing market: A microeconomic approach. Smart and Sustainable Built Environment, 4(03), 251-67.

Addae-Dapaah, K and Ching, W H (2003) Effects of property acquisition and disposal on property stock value. Journal of Financial Management of Property and Construction, 8(03), 139–54.

Addis, B and Al-Ghamdi, M (1998) The role of technical marketing in effective utilization of quality management in consulting engineering firms. In: Hughes, W (Ed.), Proceedings 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK. Association of Researchers in Construction Management, Vol. 2, 615–23.

Addis, M (2014) Tacit and explicit knowledge in construction management. In: Raiden, A and Aboagye-Nimo, E (Eds.), Proceedings 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK, Association of Researchers in Construction Management, 1245–52.

Addis, M (2016) Tacit and explicit knowledge in construction management. Construction Management and Economics, 34(07), 439-45.

Addy, M N, Akunyumu, S and Simons, B (2019) Key risk factors affecting renewable energy independent power producer (IPP) set-up projects in developing countries. Journal of Engineering, Design and Technology , 17(06), 1340–55.

Addy, M, Adinyira, E and Ayarkwa, J (2018) Antecedents of building information modelling adoption among quantity surveyors in Ghana. Journal of Engineering, Design and Technology, 16(02), 313–26.

Addyman, S (2019) The timing of patterning or the patterning of timing? Organisational routines in temporary organisations, Unpublished PhD Thesis, The Bartlett School of Construction and Project Management, University College London.

Ade, R and Rehm, M (2020) Reaching for the stars: green construction cost premiums for Homestar certification. Construction Management and Economics, 38(06), 570–80.

Ade, R and Rehm, M (2021) Summertime comparative evaluation of indoor temperature and comfort in Auckland New Zealand: a survey of green certified, code and older homes. Building Research & Information, 49(03), 336–51.

Ade, R and Rehm, M (2020) The unwritten history of green building rating tools: a personal view from some of the ‘founding fathers’. Building Research & Information, 48(01), 1–17.

Adebayo, A K, Price, A D F and Gibb, A G F (2006) Impact of modern methods of construction on healthcare infrastructure. In: Boyd, D (Ed.), Proceedings 22nd Annual ARCOM Conference, 4-6 September 2006 Birmingham, UK. Association of Researchers in Construction Management, Vol. 2, 969–77.

Adebisi, E O, Alao, O O and Ojo, S O (2020) Assessment of early warning signs predisposing building projects to failure in Nigeria. Journal of Engineering, Design and Technology , 18(06), 1403–23.

Adebisi, E O, Ojo, S O and Alao, O O (2018) Assessment of factors influencing the failure and abandonment of multi-storey building projects in Nigeria. International Journal of Building Pathology and Adaptation, 36(02), 210–31.

Adedayo, O, Michieletto, M, Bamidele, E and Ntigulirwa, M (2020) Application of hybrid green fences for security in public building designs in Nigeria: Lessons from kigali, Rwanda and abuja, Nigeria. Journal of Construction in Developing Countries, 25(1), 147-62.

Adedeji, J A, Fadamiro, J A and Odeyale, T O (2019) Design toolkits for campus open spaces from post-occupancy evaluations of federal universities in South-west Nigeria. Built Environment Project and Asset Management, 10(02), 296–311.

Adediran, A (2018) Modelling targeted procurement strategies and relationship quality criteria influencing the development of small contractors in South Africa, Unpublished PhD Thesis, Department of Construction Economics and Management, University of Cape Town.

Adefila, A, Abuzeinab, A, Whitehead, T and Oyinlola, M (2020) Bottle house: utilising appreciative inquiry to develop a user acceptance model. Built Environment Project and Asset Management, 10(04), 567–83.

Adekunle, T O (2019) Field measurements of comfort, seasonal performance and cold stress in cross-laminated timber (CLT) school buildings. Smart and Sustainable Built Environment, 9(04), 655–73.

Adekunle, T O (2020) Occupants’ comfort and stress indices in a structural timber school building in the Northeast US in different seasons. Building Research & Information, 48(03), 331–48.

Adekunle, T O (2019) Summer performance, comfort, and heat stress in structural timber buildings under moderate weather conditions. Smart and Sustainable Built Environment, 8(03), 220–42.

Adel, J F v d, Al-Jibouri, S H, Karim, U F A and Mawdesley, M (2003) Integrated Foundation Design of Buildings: Case Demonstration of a Prototype Expert System. Journal of Engineering, Design and Technology, 1(01), 55–74.

Adelekan S, Wamuziri S and Binsardi B (2013) Evaluation of islamic financing products for housing and infrastructure development. In: Smith, S D and Ahiaga-Dagbui, D D (Eds.), Proceedings 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK, Association of Researchers in Construction Management, 191–200.

Adeleye, T, Huang, M, Huang, Z and Sun, L (2013) Predicting Loss for Large Construction Companies. Journal of Construction Engineering and Management, 139(09), 1224–36.

Adeli, H and Karim, A (1997) Scheduling/Cost Optimization and Neural Dynamics Model for Construction. Journal of Construction Engineering and Management, 123(04), 450–8.

Adeli, H and Wu, M (1998) Regularization Neural Network for Construction Cost Estimation. Journal of Construction Engineering and Management, 124(01), 18–24.

Adenuga, O and Ibiyemi, A (2009) An assessment of the state of maintenance of public hospital buildings in southwest Nigeria. Australasian Journal of Construction Economics and Building, 9(02), 51-60.

Aderinlewo, O and Alade, G A (2014) Reliability-based analysis and design of steel frames with different supports. Journal of Engineering, Design and Technology, 12(01), 39-52.

Adesi, M, Murphy, R and Kehily, D (2018) The Role of Digitisation in the Strategic Planning Process of Irish Quantity Surveying (QS) Practices. In: Gorse, C and Neilson, C J (Eds.), Proceedings 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK. Association of Researchers in Construction Management, 250–259.

Adesi, M, Murphy, R and Kehily, D (2019) The Strategy Process of Irish Quantity Surveying Firms Operating Within a Turbulent Business Environment. In: Gorse, C and Neilson, C J (Eds.), Proceedings 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK Association of Researchers in Construction Management, 791-799.

Adesi, M, Owusu-Manu, D and Boateng, F (2019) Segmentation of quantity surveying professional services for focus strategy and diversification. Journal of Financial Management of Property and Construction , 24(03), 294–308.

Adesi, M, Owusu-Manu, D and Murphy, R (2018) Strategic competences for pricing quantity surveying consultancy services. Engineering, Construction and Architectural Management, 25(03), 458–74.

Adetola, A E (2014) A conceptual collaborative engagement framework for road infrastructure management in Nigeria , Unpublished PhD Thesis, Grenfell-Baines School of Architecture, Construction and Environment, University of Central Lancashire.

Adetunji, I O (2006) Sustainable construction: a web-based performance assessment tool, Unpublished PhD Thesis, Department of Building and Civil Engineering, Loughborough University.

Adetunji, I, Price, A, Fleming, P and Kemp, P (2003) The application of systems thinking to the concept of sustainability. In: Greenwood, D J (Ed.), Proceedings 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK. Association of Researchers in Construction Management, Vol. 1, 161–70.

Adewumi, A S, Onyango, V, Moyo, D and AlWaer, H (2019) A review of selected neighbourhood sustainability assessment frameworks using the Bellagio STAMP. International Journal of Building Pathology and Adaptation, 37(01), 108–18.

Adewunmi, O A, Ibem, E and Amole, D (2014) Satisfaction of first-time residential clients with architectural services. Journal of Engineering, Design and Technology, 12(03), 316-35.

Adewunmi, Y, Famuyiwa, F and Harrison, E (2009) Post occupancy evaluation of facilities in Nigerian private universities: A case study. In: Dainty, A R J (Ed.), Proceedings 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK. Association of Researchers in Construction Management, Vol. 1, 505–14.

Adewunmi, Y, Omirin, M and Koleoso, H (2016) Prioritising facilities management services for benchmarking in selected cities in Nigeria. Journal of Construction in Developing Countries, 21(1), 131-45.

Adey, B T, Lethanh, N, Hartmann, A and Viti, F (2014) Evaluation of intervention strategies for a road link in the Netherlands. Built Environment Project and Asset Management, 4(02), 180-98.

Adeyemi, B S and Aigbavboa, C O (2020) Conflict factors investigation among construction professionals in Nigeria. Journal of Engineering, Design and Technology , 18(05), 1121–37.

Adeyemi, H O, Adejuyigbe, S B, Ismaila, S O and Adekoya, A F (2015) Low back pain assessment application for construction workers. Journal of Engineering, Design and Technology, 13(03), 419-34.

Adeyeye, K and Emmitt, S (2017) Multi-scale, integrated strategies for urban flood resilience. International Journal of Disaster Resilience in the Built Environment, 8(05), 494-520.

Adeyeye, K, Pasquire, C, Bouchlaghem, D and Chandler, J (2006) Exploring the efficacy of digital tools for the design and construction of hybrid buildings. In: Boyd, D (Ed.), Proceedings 22nd Annual ARCOM Conference, 4-6 September 2006 Birmingham, UK. Association of Researchers in Construction Management, Vol. 2, 663–73.

Adeyeye, O (2009) Design decisions for hybrid projects using integrated building information, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Adham, T A (1992) Formation of project managers, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Adinyira, E, Agyekum, K, Baiden, B K, Ebohon, O J and Ampratwum, G (2020) Regeneration of Sub-Saharan Africa's open marketplaces: a case for guileless stakeholder participation. Construction Economics and Building, 20(02), 165-180.

Adinyira, E, Agyekum, K, Danku, J C, Addison, P and Kukah, A S (2020) Influence of subcontractor risk management on quality performance of building construction projects in Ghana. Journal of Construction in Developing Countries, 25(2), 175-97.

Adinyira, E, Manu, P, Agyekum, K, Mahamadu, A and Olomolaiye, P O (2020) Violent behaviour on construction sites: structural equation modelling of its impact on unsafe behaviour using partial least squares. Engineering, Construction and Architectural Management, 27(10), 3363–93.

Adjei, S D (2016) Review of waste management in the UK construction industry, Unpublished PhD Thesis, Faculty of Science and Engineering, University of Wolverhampton.

Adjei, S D, Ankrah, N A, Ndekugri, I and Searle, D (2018) Sustainable Construction and Demolition Waste Management: Comparison of Corporate and Project Level Drivers. In: Gorse, C and Neilson, C J (Eds.), Proceedings 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK. Association of Researchers in Construction Management, 99–108.

Adjei, S, Ankrah, N, Ndekugri, I and Searle, D (2015) Investigating the extent to which waste management legislation affects waste management practices within the UK construction industry . In: Raiden, A and Aboagye-Nimo, E (Eds.), Proceedings 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK. Association of Researchers in Construction Management, 237–246.

Adjidjonu, D and Burgett, J (2021) Assessing the Accuracy of Unmanned Aerial Vehicles Photogrammetric Survey. International Journal of Construction Education and Research, 17(01), 85–96.

Adnan, H and Morledge, R (2003) Joint venture projects in Malaysian construction industry: factors critical to success. In: Greenwood, D J (Ed.), Proceedings 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK. Association of Researchers in Construction Management, Vol. 2, 765–74.

Adogbo, K J, Ibrahim, A D and Ibrahim, Y M (2015) Development of a framework for attracting and retaining women in construction practice. Journal of Construction in Developing Countries, 20(1), 99-115.

Adogbo, K.J. (2013) Development of a Framework for Attracting and Retaining Women in Construction Practice, Unpublished PhD Thesis, Department of Quantity Surveying, Faculty of Environmental Design, Ahmadu Bello University, Zaria, Nigeria.

Adriaanse, A and Voordijk, H (2005) Interorganizational communication and ICT in construction projects: a review using metatriangulation. Construction Innovation, 5(03), 159–77.

Adriaanse, A M and Voordijk, H (2002) Information richness in construction projects: a critical social theory. In: Greenwood, D (Ed.), Proceedings 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK. Association of Researchers in Construction Management, Vol. 1, 197–206.

Adriaanse, A, Voordijk, H and Dewulf, G (2010) Adoption and Use of Interorganizational ICT in a Construction Project. Journal of Construction Engineering and Management, 136(09), 1003–14.

Adriaanse, A, Voordijk, H and Dewulf, G (2010) The use of interorganisational ICT in construction projects: a critical perspective. Construction Innovation, 10(02), 223–37.

Adshead, J (2009) An integrated approach to water protection and management: the European Union model. International Journal of Law in the Built Environment, 1(03), 234-43.

Adshead, J (2014) Revisiting the ideologies of planning law: Private property, public interest and public participation in the legal framework of England and Wales. International Journal of Law in the Built Environment, 6(01), 174-93.

Adu, E T and Opawole, A (2019) Assessment of performance of teamwork in construction projects delivery in South-Southern Nigeria. Journal of Engineering, Design and Technology , 18(01), 230–50.

Adu, E T, Lamptey-Puddicombe, A D and Opawole, A (2020) Consultants' perspectives of survival strategies for small and medium construction firms at infancy stage. Journal of Construction Business and Management, 4(1), 34-47.

Adukpo, S E and Leiringer, R (2016) Client Project Governance Capabilities: Unpacking the Concept and Governance Mechanisms in Practice. In: Chan, P W and Neilson, C J (Eds.), Proceedings 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester UK. Association of Researchers in Construction Management, 165–174.

Aduwo, E B, Ibem, E O, Afolabi, A O, Oluwnmi, A O, Tunji-Olayeni, P F, Ayo-Vaughan, E A, Uwakonye, U O and Oni, A A (2020) Exploring anti-corruption capabilities of e-procurement in construction project delivery in Nigeria. Construction Economics and Building, 20(01), 56-76.

Adzande, P, Gyuse, T T and Atser, J (2018) Correlates of crime in urban Makurdi, Nigeria. African Journal of Built Environment Research, 2(1), 21-40.

af Hällström, A and Bosch-Sijtsema, P (2020) Collaboration and Relationships in Nordic Infrastructure Project Networks. In: Scott, L and Neilson, C J (Eds.), Proceedings 36th Annual ARCOM Conference, 7-8 September 2020, UK, Association of Researchers in Construction Management, 245-254.

af Hällström, A and Bosch-Sijtsema, P (2019) Early Contractor Involvement In The Construction Industry: A Literature Review. In: Gorse, C and Neilson, C J (Eds.), Proceedings 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK Association of Researchers in Construction Management, 314-323.

Afeez, A, Sanjay and Kumar, A (2013) Application of CAD and reverse engineering methodology for development of complex assemblies. Journal of Engineering, Design and Technology, 11(03), 375-90.

Afetornu, C (2011) The influence of estimator attitude on project cost reliability, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Afetornu, C and Edum-Fotwe, F T (2005) Characterising project contingency budget in construction. In: Khosrowshahi, F (Ed.), Proceedings 21st Annual ARCOM Conference, 7-9 September 2005, London, UK. Association of Researchers in Construction Management, Vol. 1, 259–68.

Afetornu, C, Edum-Fotwe, F T and McCaffer, R (2006) Estimating budget variability for road projects. In: Boyd, D (Ed.), Proceedings 22nd Annual ARCOM Conference, 4-6 September 2006 Birmingham, UK. Association of Researchers in Construction Management, Vol. 2, 563–71.

Afolabi, A, O, Oluwatayo, A, Oyeyipo, O, Ojelabi, R and Fagbenle, O (2018) Assessment of Designers’ Perception of Post Conflict Housing Schemes for Internally Displaced Persons. Construction Economics and Building, 18(01), 27-47.

Afolabi, A, Oyeyipo, O, Ojelabi, R and Patience, T O (2019) Balancing the female identity in the construction industry. Journal of Construction in Developing Countries, 24(2), 83-104.

Afroz, R (2020) Developing a low-carbon architecture pedagogy in Bangladesh. Buildings and Cities, 1(01), 637–49.

Afshar, A, Ziaraty, A K, Kaveh, A and Sharifi, F (2009) Nondominated Archiving Multicolony Ant Algorithm in Time–Cost Trade-Off Optimization. Journal of Construction Engineering and Management, 135(07), 668–74.

Afshari, A R (2017) Methods for Selection of Construction Project Manager: Case Study. Journal of Construction Engineering and Management, 143(12).

Afzal, F, Yunfei, S, Sajid, M and Afzal, F (2019) Integrated priority decision index for risk assessment in chaos: cost overruns in transport projects. Engineering, Construction and Architectural Management, 27(04), 825–49.

Agapiou, A (1998) A review of recent developments in construction operative training. Construction Management and Economics, 16(05), 511-20.

Agapiou, A (1996) Forecasting the supply of construction labour, Unpublished PhD Thesis, Department of Civil Engineering, Loughborough University of Technology.

Agapiou, A (2002) Perceptions of gender roles and attitudes toward work among male and female operatives in the Scottish construction industry. Construction Management and Economics, 20(08), 697-705.

Agapiou, A (2015) The factors influencing mediation referral practices and barriers to its adoption: A survey of construction lawyers in England and Wales. International Journal of Law in the Built Environment, 7(03), 231-47.

Agapiou, A and Clark, B (2014) Construction mediation in Scotland: A comparison of the views and experiences of lawyers and end-users. In: Raiden, A and Aboagye-Nimo, E (Eds.), Proceedings 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK, Association of Researchers in Construction Management, 583–91.

Agapiou, A and Dainty, A R J (2003) Client-led approaches to increasing participation of women, ethnic minorities and disabled people in the construction workforce: a framework for change. Journal of Construction Procurement, 9(02), 4–16.

Agapiou, A, Clausen, L E, Flanagan, R, Norman, G and Notman, D (1998) The role of logistics in the materials flow control process: experiences from abroad. Construction Management and Economics, 16(02), 131-7.

Agapiou, A, Flanagan, R, Norman, G and Notman, D (1998) The changing role of builders' merchants in the construction supply-chain. Construction Management and Economics, 16(03), 351-61.

Agapiou, A, Price, A D F and McCaffer, R (1995) Forecasting the supply of construction skills in the UK. Construction Management and Economics, 13(04), 353-64.

Agapiou, A, Price, A D F and McCaffer, R (1995) Planning future construction skill requirements: understanding labour resource issues1. Construction Management and Economics, 13(02), 149-61.

Agbaxode, P D K, Saghatforoush, E and Dlamini, S (2020) Integrated Project Delivery (IPD): Projecting a Common Good to Key Participants and the Project . In: Scott, L and Neilson, C J (Eds.), Proceedings 36th Annual ARCOM Conference, 7-8 September 2020, UK, Association of Researchers in Construction Management, 136-145.

Agbesi, K, Fugar, F D and Adjei-Kumi, T (2018) Modelling the adoption of sustainable procurement in construction organisations. Built Environment Project and Asset Management, 8(05), 461–76.

Agbesi, K, Kissi, E and Adjei-Kumi, T (2020) Implementation of Sustainable Procurement Practices in Public Sector Construction Organisation in Ghana. In: Scott, L and Neilson, C J (Eds.), Proceedings 36th Annual ARCOM Conference, 7-8 September 2020, UK, Association of Researchers in Construction Management, 526-535.

Agbulos, A, Mohamed, Y, Al-Hussein, M, AbouRizk, S and Roesch, J (2006) Application of Lean Concepts and Simulation Analysis to Improve Efficiency of Drainage Operations Maintenance Crews. Journal of Construction Engineering and Management, 132(03), 291–9.

Agdas, D and Ellis, R D (2010) The potential of XML technology as an answer to the data interchange problems of the construction industry. Construction Management and Economics, 28(07), 46.

Agee, P, Gao, X, Paige, F, McCoy, A and Kleiner, B (2021) A human-centred approach to smart housing. Building Research & Information, 49(01), 84–99.

Aggarwal, A, Rani, A and Kumar, M (2019) A robust method to authenticate car license plates using segmentation and ROI based approach. Smart and Sustainable Built Environment, 9(04), 737–47.

Aggarwal, T and Solomon, P (2019) Quantitative analysis of the development of smart cities in India. Smart and Sustainable Built Environment, 9(04), 711–26.

Agha, R H and Kamara, J M (2017) Adaptations in traditional courtyard houses in Baghdad, Iraq. International Journal of Building Pathology and Adaptation, 35(04), 348–63.

Aghimien, D O, Aghimien, E I, Fadiyimu, A O and Adegbembo, T F (2018) Survival strategies of built environment organisations in a challenging economy. Engineering, Construction and Architectural Management, 25(07), 861–76.

Aghimien, D O, Aigbavboa, C O and Oke, A E (2020) Critical success factors for digital partnering of construction organisations – a Delphi study. Engineering, Construction and Architectural Management, 27(10), 3171–88.

Aghimien, D O, Aigbavboa, C O and Thwala, W D (2019) Microscoping the challenges of sustainable construction in developing countries. Journal of Engineering, Design and Technology , 17(06), 1110–28.

Aghimien, D O, Aigbavboa, C O, Oke, A E and Thwala, W D (2019) Mapping out research focus for robotics and automation research in construction-related studies. Journal of Engineering, Design and Technology , 18(05), 1063–79.

Aghimien, D O, Awodele, O A and Maipompo, C S (2019) Organisational commitment of construction skilled workers in selected construction firms in Nigeria. Journal of Construction Business and Management, 3(1), 8-17.

Aghimien, D O, Oke, A E and Aigbavboa, C O (2018) Barriers to the adoption of value management in developing countries. Engineering, Construction and Architectural Management, 25(07), 818–34.

Agren, R and Wing, R D (2014) Five moments in the history of industrialized building. Construction Management and Economics, 32(01), 7-15.

Aguado, A, Caño, A d, de la Cruz, M P, Gómez, D and Josa, A (2012) Sustainability Assessment of Concrete Structures within the Spanish Structural Concrete Code. Journal of Construction Engineering and Management, 138(02), 268–76.

Agumba, J N and Haupt, T C (2014) The implementation of health and safety practices: Do demographic attributes matter?. Journal of Engineering, Design and Technology, 12(04), 530-50.

Agyakwa-Baah, A and Chileshe, N (2010) Construction professionals perception of risk assesssment and management practices: does length of service in construction industry matter. In: Egbu, C (Ed.), Proceedings 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK. Association of Researchers in Construction Management, Vol. 2, 1219–28.

Agyefi-Mensah, S, Kpamma, Z E and Hagan, D E (2020) Residential adaptations as users' tacit means of communicating spatial needs in housing design. Journal of Engineering, Design and Technology , 18(06), 1593–613.

Agyefi-Mensah, S, Post, J, van Egmond, E E L C, Badu, E and Mohammadi, M (2015) A typological analysis of public apartment buildings in Ghana. Architectural Engineering and Design Management, 11(05), 376-89.

Agyefi-Mensah, S, Post, J, van Egmond, E, Badu, E and Mohammadi, M (2015) The need for post-occupancy evaluation of public apartment buildings in Ghana. Journal of Engineering, Design and Technology, 13(02), 315-33.

Agyekum-Mensah, G and Knight, A D (2017) The professionals’ perspective on the causes of project delay in the construction industry. Engineering, Construction and Architectural Management, 24(05), 828-41.

Agyekum-Mensah, G, Knight, A and Pasquire, C (2012) Adaption of structured analysis design techniques methodology for construction project planning. In: Smith, S.D (Ed.), Proceedings 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK. Association of Researchers in Construction Management, 1055–65.

Agyekum-Mensah, G, Reid, A and Temitope, T A (2020) Methodological Pluralism: Investigation into Construction Engineering and Management Research Methods. Journal of Construction Engineering and Management, 146(03).

Agyekum, B, Kissi, E, Yamoah Agyemang, D and Badu, E (2018) Examining barriers for the utilization of non-traditional cost estimating models in developing countries. Journal of Engineering, Design and Technology, 16(06), 814–27.

Agyekum, K, Adinyira, E and Ampratwum, G (2020) Factors driving the adoption of green certification of buildings in Ghana. Smart and Sustainable Built Environment, 9(04), 595–613.

Agyekum, K, Adinyira, E, Baiden, B, Ampratwum, G and Duah, D (2019) Barriers to the adoption of green certification of buildings. Journal of Engineering, Design and Technology , 17(05), 1035–55.

Agyekum, K, Blay, K and Opoku, A (2019) Mechanisms for preventing rising damp in new building infrastructure. International Journal of Building Pathology and Adaptation, 37(01), 87–107.

Agyekum, K, Kissi, E, Danku, J C, Ampratwum, G and Amegatsey, G S (2020) Factors driving the career progression of construction project managers. Journal of Engineering, Design and Technology , 18(06), 1773–91.

Ahadzi, M and Bowles, G (2004) Public-private partnerships and contract negotiations: an empirical study. Construction Management and Economics, 22(09), 967-78.

Ahadzi, M and Bowles, G (2001) Public-private partnerships in UK infrastructure development: the macroeconomic perspective. In: Akintoye, A (Ed.), Proceedings 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK. Association of Researchers in Construction Management, Vol. 1, 971–9.

Ahadzi, M and Bowles, G (2001) The private finance initiative: the procurement process in perspective. In: Akintoye, A (Ed.), Proceedings 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK. Association of Researchers in Construction Management, Vol. 1, 991–9.

Ahadzie, D K (2007) A model for predicting the performance of project managers in mass house building projects in Ghana, Unpublished PhD Thesis, Faculty of Science and Engineering, University of Wolverhampton.

Ahadzie, D K, Proverbs, D G and Olomolaiye, P (2006) Development of research instrument for project managers' performance measures in mass house building projects. In: Boyd, D (Ed.), Proceedings 22nd Annual ARCOM Conference, 4-6 September 2006 Birmingham, UK. Association of Researchers in Construction Management, Vol. 1, 165–75.

Ahadzie, D K, Proverbs, D G and Olomolaiye, P (2005) Project managers' performance measures: a fresh perspective. In: Khosrowshahi, F (Ed.), Proceedings 21st Annual ARCOM Conference, 7-9 September 2005, London, UK. Association of Researchers in Construction Management, Vol. 1, 3–12.

Ahadzie, D K, Proverbs, D G and Olomolaiye, P O (2008) Model for Predicting the Performance of Project Managers at the Construction Phase of Mass House Building Projects. Journal of Construction Engineering and Management, 134(08), 618–29.

Ahadzie, D K, Proverbs, D G, Olomolaiye, P O and Ankrah, N (2009) Towards developing competency-based measures for project managers in mass house building projects in developing countries. Construction Management and Economics, 27(01), 89–102.

Ahadzie, D K, Proverbs, D G, Olomolaiye, P O and Ankrah, N A (2009) Competencies required by project managers for housing construction in Ghana: Implications for CPD agenda. Engineering, Construction and Architectural Management, 16(04), 353–75.

Ahankoob, A, Manley, K, Hon, C and Drogemuller, R (2018) The impact of building information modelling (BIM) maturity and experience on contractor absorptive capacity. Architectural Engineering and Design Management, 14(05), 363–80.

Ahiaga-Dagbui D D and Smith S D (2013) My cost runneth over: data mining to reduce construction cost overruns. In: Smith, S D and Ahiaga-Dagbui, D D (Eds.), Proceedings 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK, Association of Researchers in Construction Management, 559–568.

Ahiaga-Dagbui D D, Tokede O, Smith S D and Wamuziri S (2013) A neuro-fuzzy hybrid model for predicting final cost of water infrastructure projects. In: Smith, S D and Ahiaga-Dagbui, D D (Eds.), Proceedings 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK, Association of Researchers in Construction Management, 181–190.

Ahiaga-Dagbui, D and Smith, S D (2012) Neural networks for modelling the final target cost of water projects. In: Smith, S.D (Ed.), Proceedings 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK. Association of Researchers in Construction Management, 307–16.

Ahiaga-Dagbui, D D (2014) Rethinking construction cost overruns: an artificial neural network approach to construction cost estimation, Unpublished PhD Thesis, School of Engineering, University of Edinburgh.

Ahiaga-Dagbui, D D and Smith, S D (2014) Dealing with construction cost overruns using data mining. Construction Management and Economics, 32(07), 682-94.

Ahiaga-Dagbui, D D and Smith, S D (2014) Exploring escalation of commitment in construction project management: Case study of the scottish parliament project. In: Raiden, A and Aboagye-Nimo, E (Eds.), Proceedings 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK, Association of Researchers in Construction Management, 753–62.

Ahiaga-Dagbui, D D, Love, P E D, Whyte, A and Boateng, P (2017) Costing and Technological Challenges of Offshore Oil and Gas Decommissioning in the U.K. North Sea. Journal of Construction Engineering and Management, 143(07).

Ahiaga-Dagbui, D D, Tokede, O, Morrison, J and Chirnside, A (2020) Building high-performing and integrated project teams. Engineering, Construction and Architectural Management, 27(10), 3341–61.

Ahiaga-Dagbui, D, Smith, S D, Love, P E D and Ackermann, F (2015) Spotlight on construction cost overrun research: Superficial, replicative and stagnated . In: Raiden, A and Aboagye-Nimo, E (Eds.), Proceedings 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK. Association of Researchers in Construction Management, 863–872.

Ahiakwo, O A (2015) Improving construction processes in Nigeria using the Last Planner® system, Unpublished PhD Thesis, Faculty of Science and Engineering, University of Wolverhampton.

Ahmad Shazali, A S and Tahar, K N (2019) Virtual 3D model of Canseleri building via close-range photogrammetry implementation. International Journal of Building Pathology and Adaptation, 38(01), 217–27.

Ahmad-Latiffi, A (2012) Performance measurement for construction businesses, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Ahmad, A G and Rahman, H F A (2010) Treatment of salt attack and rising damp in heritage buildings in penang, Malaysia. Journal of Construction in Developing Countries, 15(1), 93-113.

Ahmad, A M (2014) The use of refurbishment, flexibility, standardisation and BIM to support the design of a change-ready healthcare facility, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Ahmad, H S, An, M and Gaterell, M (2007) Development of KM model to simplify knowledge management implementation in construction projects. In: Boyd, D (Ed.), Proceedings 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK. Association of Researchers in Construction Management, Vol. 2, 515–24.

Ahmad, H S, Ayoush, M D and Al-Alwan, M S (2019) Causes of delay to public infrastructure projects according to engineers representing different contract parties. Built Environment Project and Asset Management, 10(01), 153–79.

Ahmad, H, An, M and Gaterell, M (2008) KM model to embed knowledge management activities into work activities in construction organisations. In: Dainty, A (Ed.), Proceedings 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK. Association of Researchers in Construction Management, Vol. 1, 309–18.

Ahmad, I (1990) Decision‐Support System for Modeling Bid/No‐Bid Decision Problem. Journal of Construction Engineering and Management, 116(04), 595–608.

Ahmad, I U and Sein, M K (1997) Construction project teams for TQM: a factor-element impact model. Construction Management and Economics, 15(05), 457-67.

Ahmad, I U, Russell, J S and Abou-Zeid, A (1995) Information technology (IT) and integration in the construction industry. Construction Management and Economics, 13(02), 163-71.

Ahmad, M A, Demian P and Price, A D F (2012) Building information modelling implementation plans: a comparative analysis. In: Smith, S.D (Ed.), Proceedings 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK. Association of Researchers in Construction Management, 33–42.

Ahmad, R K (2000) Developing a proactive safety performance measurement tool for construction sites, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Ahmad, R K and Gibb, A G F (2003) Measuring safety culture with SPMT: field-data. Journal of Construction Research, 4(01), 29–44.

Ahmad, R K, Gibb, A G F and McCaffer, R (1998) Methodology to develop an effective safety performance measurement technique (SPMT). In: Hughes, W (Ed.), Proceedings 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK. Association of Researchers in Construction Management, Vol. 1, 183–91.

Ahmad, S, Soetanto, R and Goodier, C (2019) Lean approach in precast concrete component production. Built Environment Project and Asset Management, 9(03), 457–70.

Ahmad, T and Aibinu, A A (2017) Project delivery attributes influencing green building project outcomes: A review and future research directions. Built Environment Project and Asset Management, 7(05), 471-89.

Ahmad, T, Aibinu, A A and Stephan, A (2017) Green Building Projects: Process Innovation Leading To Project Innovation. In: Chan, P W and Neilson, C J (Eds.), Proceedings 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK. Association of Researchers in Construction Management, 299–308.

Ahmad, T, Thaheem, M J and Anwar, A (2016) Developing a green-building design approach by selective use of systems and techniques. Architectural Engineering and Design Management, 12(01), 29–50.

Ahmadi Esfahani, N and Shahandashti, M (2020) Post-hazard labor wage fluctuations: a comparative empirical analysis among different sub-sectors of the U.S. construction sector. Journal of Financial Management of Property and Construction , 25(03), 313–30.

Ahmadian Fard Fini, A, Akbarnezhad, A, Rashidi, T H and Waller, S T (2018) Dynamic Programming Approach toward Optimization of Workforce Planning Decisions. Journal of Construction Engineering and Management, 144(02).

Ahmadian Fard Fini, A, Akbarnezhad, A, Rashidi, T H and Waller, S T (2017) Job Assignment Based on Brain Demands and Human Resource Strategies. Journal of Construction Engineering and Management, 143(05).

Ahmadian Fard Fini, A, Rashidi, T H, Akbarnezhad, A and Travis Waller, S (2016) Incorporating Multiskilling and Learning in the Optimization of Crew Composition. Journal of Construction Engineering and Management, 142(05).

Ahmadian, F F A, Akbarnezhad, A, Rashidi, T H and Waller, S T (2016) Accounting for Transport Times in Planning Off-Site Shipment of Construction Materials. Journal of Construction Engineering and Management, 142(01).

Ahmadian, F F A, Rashidi, T H, Akbarnezhad, A and Waller, S T (2017) BIM-enabled sustainability assessment of material supply decisions. Engineering, Construction and Architectural Management, 24(04), 668-95.

Ahmadu, H A, Ibrahim, A D, Ibrahim, Y M and Adogbo, K J (2020) Incorporating aleatory and epistemic uncertainties in the modelling of construction duration. Engineering, Construction and Architectural Management, 27(09), 2199–219.

Ahmadu, H A, Ibrahim, Y M, Ibrahim, A D and Abdullahi, M (2015) Modelling building construction durations. Journal of Financial Management of Property and Construction, 20(01), 65-84.

Ahmed, A and Gidado, K (2008) Evaluating the potential of renewable energy technologies for buildings in Nigeria.. In: Dainty, A (Ed.), Proceedings 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK. Association of Researchers in Construction Management, Vol. 2, 1175–82.

Ahmed, I (2011) An overview of post-disaster permanent housing reconstruction in developing countries. International Journal of Disaster Resilience in the Built Environment, 2(02), 148-64.

Ahmed, I (2016) Housing and resilience: case studies from the Cook Islands. International Journal of Disaster Resilience in the Built Environment, 7(05), 489-500.

Ahmed, I and Charlesworth, E R (2015) An evaluation framework for assessing resilience of post-disaster housing. International Journal of Disaster Resilience in the Built Environment, 6(03), 300-12.

Ahmed, I and McEvoy, D (2014) Post-tsunami resettlement in Sri Lanka and India: site planning, infrastructure and services. International Journal of Disaster Resilience in the Built Environment, 5(01), 53-65.

Ahmed, M O, El-adaway, I H, Coatney, K T and Eid, M S (2016) Construction Bidding and the Winner’s Curse: Game Theory Approach. Journal of Construction Engineering and Management, 142(02).

Ahmed, S and Sobuz, M H R (2019) Challenges of implementing lean construction in the construction industry in Bangladesh. Smart and Sustainable Built Environment, 9(02), 174–207.

Ahmed, S H and Suliman, S M (2020) A structure equation model of indicators driving BIM adoption in the Bahraini construction industry. Construction Innovation , 20(01), 61–78.

Ahmed, S M, Ahmad, R and Saram, D D D (1999) Risk management trends in the Hong Kong construction industry: a comparison of contractors and owners perceptions. Engineering, Construction and Architectural Management, 6(03), 225–34.

Ahmed, S M, Sang, L P and Torbica, & M (2003) Use of Quality Function Deployment in Civil Engineering Capital Project Planning. Journal of Construction Engineering and Management, 129(04), 358–68.

Ahmed, S M, Yaris, C, Farooqui, R U and Saqib, M (2014) Key attributes and skills for curriculum improvement for undergraduate construction management programs. International Journal of Construction Education and Research, 10(04), 240-54.

Ahmed, V S (2000) The effectiveness of computer assisted learning in construction, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Ahmed, V, Aziz, Z, Tezel, A and Riaz, Z (2018) Challenges and drivers for data mining in the AEC sector. Engineering, Construction and Architectural Management, 25(11), 1436–53.

Ahmed, V, Pathmeswaran, R, Baldry, D, Worrall, L and Abouen, S (2008) An investigation into the barriers facing black and minority ethnics within the UK construction industry. Journal of Construction in Developing Countries, 13(2), 83-99.

Ahmed, V, Shaik, A and Aouad, G (2006) An ontology of construction education for e-learning via the semantic web. Architectural Engineering and Design Management, 2(01), 87–99.

Ahmed, V, Worrall, L, Abouen, S, Baldry, D and Pathmeswaran, R (2007) Socio-economics and black and minority ethnics in the UK construction industry. In: Boyd, D (Ed.), Proceedings 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK. Association of Researchers in Construction Management, Vol. 1, 399–407.

Ahmed, W, Najmi, A, Arif, M and Younus, M (2019) Exploring firm performance by institutional pressures driven green supply chain management practices. Smart and Sustainable Built Environment, 8(05), 415–37.

Ahn, C R and Lee, S (2013) Importance of Operational Efficiency to Achieve Energy Efficiency and Exhaust Emission Reduction of Construction Operations. Journal of Construction Engineering and Management, 139(04), 404–13.

Ahn, C R, Lee, S, Sun, C, Jebelli, H, Yang, K and Choi, B (2019) Wearable Sensing Technology Applications in Construction Safety and Health. Journal of Construction Engineering and Management, 145(11).

Ahn, C R, Lewis, P, Golparvar-Fard, M and Lee, S (2013) Integrated Framework for Estimating, Benchmarking, and Monitoring Pollutant Emissions of Construction Operations. Journal of Construction Engineering and Management, 139(12).

Ahn, S and Lee, S (2015) Methodology for Creating Empirically Supported Agent-Based Simulation with Survey Data for Studying Group Behavior of Construction Workers. Journal of Construction Engineering and Management, 141(01).

Ahn, S, Crouch, L, Kim, T W and Rameezdeen, R (2020) Comparison of Worker Safety Risks between Onsite and Offsite Construction Methods: A Site Management Perspective. Journal of Construction Engineering and Management, 146(09).

Ahn, S, Lee, S and Steel, R P (2014) Construction Workers’ Perceptions and Attitudes toward Social Norms as Predictors of Their Absence Behavior. Journal of Construction Engineering and Management, 140(05).

Ahn, S, Lee, S and Steel, R P (2013) Effects of Workers’ Social Learning: Focusing on Absence Behavior. Journal of Construction Engineering and Management, 139(08), 1015–25.

Ahn, Y H, Pearce, A R and Holley, P W (2009) Project delivery system for foreign manufacturers in the United States. International Journal of Construction Education and Research, 5(03), 149–66.

Ahn, Y-H, Holley, P and Kang, J S (2009) Risk management of exchange rates in international construction. International Journal of Construction Education and Research, 5(01), 24-44.

Ahrentzen, S and Tural, E (2015) The role of building design and interiors in ageing actively at home. Building Research & Information, 43(05), 582-601.

Ahsan, S, El-Hamalawi, A, Bouchlaghem, D and Ahmad, S (2007) Mobile technologies for improved collaboration on construction sites. Architectural Engineering and Design Management, 3(04), 257–72.

Ahuja, H N and Aranachalam, V (1984) Risk Evaluation in Resource Allocation. Journal of Construction Engineering and Management, 110(03), 324–36.

Ahuja, H N and Nandakumar, V (1985) Simulation Model to Forecast Project Completion Time. Journal of Construction Engineering and Management, 111(04), 325–42.

Ahuja, R, Jain, M, Sawhney, A and Arif, M (2016) Adoption of BIM by architectural firms in India: technology–organization–environment perspective. Architectural Engineering and Design Management, 12(04), 311–30.

Ahuja, R, Sawhney, A and Arif, M (2018) Developing organizational capabilities to deliver lean and green project outcomes using BIM. Engineering, Construction and Architectural Management, 25(10), 1255–76.

Ahuja, S, Nikolova, N and Clegg, S (2020) Professional identity and anxiety in architect-client interactions. Construction Management and Economics, 38(07), 589–602.

Ahuja, V and Thiruvengadam, V (2004) Project scheduling and monitoring: current research status. Construction Innovation, 4(01), 19–31.

Ahuja, V, Yang, J and Shankar, R (2010) Benchmarking Framework to Measure Extent of ICT Adoption for Building Project Management. Journal of Construction Engineering and Management, 136(05), 538–45.

Ahuja, V, Yang, J and Shankar, R (2009) Benefits of collaborative ICT adoption for building project management. Construction Innovation, 9(03), 323–40.

Ahuja, V, Yang, J and Shankar, R (2010) IT-enhanced communication protocols for building project management. Engineering, Construction and Architectural Management, 17(02), 79.

Ahuja, V, Yang, J, Skitmore, M and Shankar, R (2010) An empirical test of causal relationships of factors affecting ICT adoption for building project management: An Indian SME case study. Construction Innovation, 10(02), 164–80.

Aibinu, A A (2006) The relationship between distribution of control, fairness and potential for dispute in the claims handling process. Construction Management and Economics, 24(01), 45-54.

Aibinu, A A and Odeyinka, H A (2006) Construction Delays and Their Causative Factors in Nigeria. Journal of Construction Engineering and Management, 132(07), 667–77.

Aibinu, A A and Papadonikolaki, E (2020) Conceptualizing and operationalizing team task interdependences: BIM implementation assessment using effort distribution analytics. Construction Management and Economics, 38(05), 420–46.

Aibinu, A A and Pasco, T (2008) The accuracy of pre-tender building cost estimates in Australia. Construction Management and Economics, 26(12), 69.

Aibinu, A A, Carter, S, Francis, V and Vaz-Serra, P (2019) Request for information frequency and their turnaround time in construction projects. Built Environment Project and Asset Management, 10(01), 1–15.

Aibinu, A A, Dassanayake, D, Chan, T-K and Thangaraj, R (2015) Cost estimation for electric light and power elements during building design: A neural network approach. Engineering, Construction and Architectural Management, 22(02), 190-213.

Aibinu, A A, Ling, F Y Y and Ofori, G (2011) Structural equation modelling of organizational justice and cooperative behaviour in the construction project claims process: contractors' perspectives. Construction Management and Economics, 29(05), 463–81.

Aibinu, A A, Ofori, G and Ling, F Y (2008) Explaining Cooperative Behavior in Building and Civil Engineering Projects’ Claims Process: Interactive Effects of Outcome Favorability and Procedural Fairness. Journal of Construction Engineering and Management, 134(09), 681–91.

Aibinu, A and Papadonikolaki, E (2016) BIM Implementation and Project Coordination in Design-Build Procurement . In: Chan, P W and Neilson, C J (Eds.), Proceedings 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester UK. Association of Researchers in Construction Management, 15–24.

Aigbavboa C and Thwala W (2013) The role of beneficiaries' participation in South Africa low-income housing occupants' satisfaction . In: Smith, S D and Ahiaga-Dagbui, D D (Eds.), Proceedings 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK, Association of Researchers in Construction Management, 1331–1340.

Aigbavboa, C and Thwala, W (2014) An assessment of critical success factors for the reduction of the cost of poor quality from construction projects in South Africa. In: Raiden, A and Aboagye-Nimo, E (Eds.), Proceedings 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK, Association of Researchers in Construction Management, 773–82.

Aigwi, I E, Egbelakin, T and Ingham, J (2018) Efficacy of adaptive reuse for the redevelopment of underutilised historical buildings. International Journal of Building Pathology and Adaptation, 36(04), 385–407.

Aijazi, O (2015) Social repair and structural inequity: implications for disaster recovery practice. International Journal of Disaster Resilience in the Built Environment, 6(04), 454-67.

Aikivuori, A (1996) Periods and demand for private sector housing refurbishment. Construction Management and Economics, 14(01), 3-12.

Ailabouni, N (2010) Factors affecting employee productivity in the UAE construction industry, Unpublished PhD Thesis, School of Environment and Technology, University of Brighton.

Ailabouni, N, Painting, N and Ashton, P (2009) Factors affecting employee productivity in the UAE construction industry. In: Dainty, A R J (Ed.), Proceedings 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK. Association of Researchers in Construction Management, Vol. 1, 555–64.

Aivaliotis, V, Giannakopoulou, T, Gratsiou, M and Panagiotakopoulos, D (1991) Economies of scale and strategic planning for municipal waste treatment plants in Greece. Construction Management and Economics, 9(06), 553-64.

Aiyetan, A O and Olotuah, A O (2006) Impact of motivation on workers' productivity in the Nigerian construction industry. In: Boyd, D (Ed.), Proceedings 22nd Annual ARCOM Conference, 4-6 September 2006 Birmingham, UK. Association of Researchers in Construction Management, Vol. 1, 239–48.

Aiyetan, O A (2019) Influence of the management styles and quality of management on project delivery. Journal of Construction Business and Management, 3(1), 38-44.

Aiyetan, O, A and Dillip, D (2018) System Dynamics Approach to Mitigating Skilled Labour Shortages in the Construction Industry: A South Africa Context . Construction Economics and Building, 18(04), 45-63.

Ajayi, O O, Koleoso, H, Ajayi, M and Faremi, O (2019) Maintenance performance of prison facilities in southwestern Nigeria. Journal of Construction Business and Management, 3(2), 26-34.

Ajayi, S O, Jones, W and Unuigbe, M (2019) Occupational stress management for UK construction professionals. Journal of Engineering, Design and Technology , 17(04), 819–32.

Ajayi, S O, Oyedele, L O, Kadiri, K O, Akinade, O O, Bilal, M, Owolabi, H A and Alaka, H A (2016) Competency-based measures for designing out construction waste: Task and contextual attributes. Engineering, Construction and Architectural Management, 23(04), 464-90.

Ajayi, S, Brinklow-Harris, J Alaka, H A and Dauda, J A (2019) Managing the Benefits and Impediments to Offsite Construction in the UK Construction Industry. In: Gorse, C and Neilson, C J (Eds.), Proceedings 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK Association of Researchers in Construction Management, 577-586.

Aje, I (2012) The impact of contractors' prequalification on construction project delivery in Nigeria. Engineering, Construction and Architectural Management, 19(02), 159-72.

Aje, I O, Oladinrin, T O and Nwaole, A N C (2016) Factors influencing success rate of contractors in competitive bidding for construction works in South-East, Nigeria. Journal of Construction in Developing Countries, 21(1), 19-34.

Aje, O I, Odusami, K T and Ogunsemi, D R (2009) The impact of contractors' management capability on cost and time performance of construction projects in Nigeria. Journal of Financial Management of Property and Construction, 14(02), 171–87.

Aje, O I, Olatunji, O A and Olalusi, O A (2017) Overrun causations under advance payment regimes. Built Environment Project and Asset Management, 7(01), 86-98.

Ajslev, J Z N, Wåhlin-Jacobsen, C D, Brandt, M, Møller, J L and Andersen, L L (2020) Losing face from engagement – an overlooked risk in the implementation of participatory organisational health and safety initiatives in the construction industry. Construction Management and Economics, 38(09), 824–39.

Aka, A, Bamgbade, A A, Saidu, I and Balogun, O M (2019) A conceptual framework for waste identification and reduction in Nigerian sandcrete blocks production process. Construction Innovation, 19(03), 405–23.

Aka, A, Isah, A D, Eze, C J and Timileyin, O (2019) Application of lean manufacturing tools and techniques for waste reduction in Nigerian bricks production process. Engineering, Construction and Architectural Management, 27(03), 658–79.

Akadiri, P O and Fadiya, O O (2013) Empirical analysis of the determinants of environmentally sustainable practices in the UK construction industry. Construction Innovation, 13(04), 352-73.

Akadiri, P O and Olomolaiye, P O (2012) Development of sustainable assessment criteria for building materials selection. Engineering, Construction and Architectural Management, 19(06), 666-87.

Akama, Y, Chaplin, S and Fairbrother, P (2014) Role of social networks in community preparedness for bushfire. International Journal of Disaster Resilience in the Built Environment, 5(03), 277-91.

Akama, Y, Cooper, V and Mees, B (2016) Beyond transmission: An analysis of communication frameworks in Australian bushfire preparedness. International Journal of Disaster Resilience in the Built Environment, 7(01), 49-62.

Akampurira, E and Windapo, A (2019) Key quality attributes of design documentation: South African perspective. Journal of Engineering, Design and Technology, 17(02), 362–82.

Akan, G T, Arditi, D and Imre, M (1984) Priority ranking of highway improvement projects. Construction Management and Economics, 2(01), 49-55.

Akanmu, A and Anumba, C J (2015) Cyber-physical systems integration of building information models and the physical construction. Engineering, Construction and Architectural Management, 22(05), 516-35.

Akanmu, A, Olayiwola, J and Olatunji, O A (2020) Musculoskeletal disorders within the carpentry trade: analysis of timber flooring subtasks. Engineering, Construction and Architectural Management, 27(09), 2577–90.

Akbari, S, Khanzadi, M and Gholamian, M R (2018) Building a rough sets-based prediction model for classifying large-scale construction projects based on sustainable success index. Engineering, Construction and Architectural Management, 25(04), 534–58.

Akbari, S, Pour Rahimian, F, Sheikhkhoshkar, M, Banihashemi, S and Khanzadi, M (2020) Dynamic sustainable success prediction model for infrastructure projects: a rough set based fuzzy inference system. Construction Innovation , 20(04), 545–67.

Akbiyikli, R and Eaton, D (2006) Operation and maintenance (O&M) management in PFI road projects in the UK. In: Boyd, D (Ed.), Proceedings 22nd Annual ARCOM Conference, 4-6 September 2006 Birmingham, UK. Association of Researchers in Construction Management, Vol. 1, 393–402.

Akbiyikli, R and Eaton, D (2004) Risk management in PFI procurement: a holistic approach. In: Khosrowshahi, F (Ed.), Proceedings 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK. Association of Researchers in Construction Management, Vol. 2, 1269–79.

Akerele, D and Gidado, K (2003) The risks and constraints in the implementation of PFI/PPP in Nigeria. In: Greenwood, D J (Ed.), Proceedings 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK. Association of Researchers in Construction Management, Vol. 1, 379–91.

Akhavian, R and Behzadan, A H (2013) Knowledge-Based Simulation Modeling of Construction Fleet Operations Using Multimodal-Process Data Mining. Journal of Construction Engineering and Management, 139(11).

Akinci, B, Fischer, M and Kunz, J (2002) Automated Generation of Work Spaces Required by Construction Activities. Journal of Construction Engineering and Management, 128(04), 306–15.

Akinci, B, Fischer, M, Kunz, J and Levitt, R (2002) Representing Work Spaces Generically in Construction Method Models. Journal of Construction Engineering and Management, 128(04), 296–305.

Akinci, B, Kiziltas, S, Ergen, E, Karaesmen, I Z and Keceli, F (2006) Modeling and Analyzing the Impact of Technology on Data Capture and Transfer Processes at Construction Sites: A Case Study. Journal of Construction Engineering and Management, 132(11), 1148–57.

Akiner, I and Tijhuis, W (2007) Work goal orientation of construction professionals in Turkey: comparison of architects and civil engineers. Construction Management and Economics, 25(11), 1165–75.

Akinradewo, O I, Aigbavboa, C O and Oke, A E (2020) Improving accuracy of road projects’ estimates in the Ghanaian construction industry. Journal of Financial Management of Property and Construction , 25(03), 407–21.

Akinradewo, O, Aigbavboa, C and Oke, A (2020) Accuracy of road construction preliminary estimate: examining the influencing factors. Built Environment Project and Asset Management, 10(05), 657–71.

Akinsola, A O (1997) An intelligent model of variations' contingency on constructions projects, Unpublished PhD Thesis, Faculty of Science and Engineering, University of Wolverhampton.

Akintola, A, Root, D and Venkatachalam, S (2017) Key Constraints To Optimal And Widespread Implementation Of BIM In The South African Construction Industry. In: Chan, P W and Neilson, C J (Eds.), Proceedings 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK. Association of Researchers in Construction Management, 25–34.

Akintola, A, Venkatachalam, S and Root, D (2017) New BIM Roles’ Legitimacy and Changing Power Dynamics on BIM-Enabled Projects. Journal of Construction Engineering and Management, 143(09).

Akintola, A, Venkatachalam, S and Root, D (2020) Understanding BIM’s impact on professional work practices using activity theory. Construction Management and Economics, 38(05), 447–67.

Akintola, B F, Jagboro, G O, Ojo, G K and Odediran, S J (2020) Effectiveness of mechanisms for enforcement of ethical standards in the construction industry. Journal of Construction Business and Management, 4(1), 1-12.

Akintoye, A (2000) Analysis of factors influencing project cost estimating practice. Construction Management and Economics, 18(01), 77-89.

Akintoye, A (1994) Design and build: a survey of construction contractors' views. Construction Management and Economics, 12(02), 155-63.

Akintoye, A (1995) Just-in-time application and implementation for building material management. Construction Management and Economics, 13(02), 105-13.

Akintoye, A and Chinyio, E (2005) Private Finance Initiative in the healthcare sector: trends and risk assessment. Engineering, Construction and Architectural Management, 12(06), 601–16.

Akintoye, A and Fitzgerald, E (2000) A survey of current cost estimating practices in the UK. Construction Management and Economics, 18(02), 161-72.

Akintoye, A and Fitzgerald, E (1995) Design and build: a survey of architects' views. Engineering, Construction and Architectural Management, 2(01), 27–44.

Akintoye, A and Main, J (2007) Collaborative relationships in construction: the UK contractors' perception. Engineering, Construction and Architectural Management, 14(06), 597–617.

Akintoye, A and Skitmore, M R (1994) A comparative analysis of three macro price forecasting models. Construction Management and Economics, 12(03), 257-70.

Akintoye, A and Skitmore, M R (1994) Models of UK private sector quarterly construction demand. Construction Management and Economics, 12(01), 3-14.

Akintoye, A and Skitmore, M R (1991) Profitability of UK construction contractors. Construction Management and Economics, 9(04), 311-25.

Akintoye, A and Sommerville, J (1995) Distributed lag relationships between UK construction orders and output. Construction Management and Economics, 13(01), 33-42.

Akintoye, A, Ajewolfe, O and Olomolaiye, P O (1992) Construction cost information management in Nigeria. Construction Management and Economics, 10(02), 107-16.

Akintoye, A, Beck, M, Hardcastle, C, Chinyio, E A and Asenova, D (2000) Management of risks within the PFI project environment. In: Akintoye, A (Ed.), Proceedings 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK. Association of Researchers in Construction Management, Vol. 1, 261–70.

Akintoye, A, Beck, M, Hardcastle, C, Chinyio, E A and Asenova, D (2003) Outsourcing the Risk Analysis Function in 'Private Finance Initiative' Projects. Journal of Construction Procurement, 9(01).

Akintoye, A, Beck, M, Hardcastle, C, Chinyio, E A and Asenova, D (2001) Risk identification practices under PFI environment. In: Akintoye, A (Ed.), Proceedings 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK. Association of Researchers in Construction Management, Vol. 1, 875–83.

Akintoye, A, Beck, M, Hardcastle, C, Chinyio, E A and Asenova, D (2001) The financial structure of private finance initiative projects. In: Akintoye, A (Ed.), Proceedings 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK. Association of Researchers in Construction Management, Vol. 1, 361–9.

Akintoye, A, Bowen, P A and Hardcastle, C (1998) Macro-economic leading indicators of construction contract prices. Construction Management and Economics, 16(02), 159-75.

Akintoye, A, Hardcastle, C, Beck, M, Chinyio, E A and Asenova, D (2003) Achieving best value in private finance initiative project procurement. Construction Management and Economics, 21(05), 461-70.

Akintoye, A, Renukappa, S and Lal, H (2012) The abolition of the "contracts in writing" rule in the 2009 Construction Act: Potential implications for UK adjudication. International Journal of Law in the Built Environment, 4(02), 140-56.

Akintoye, A, Taylor, C and Fitzgerald, E (1998) Risk analysis and management of Private Finance Initiative projects. Engineering, Construction and Architectural Management, 5(01), 9–21.

Akinwale, A A and Olusanya, O A (2020) Influence of subcontracting processes on wages and workloads in the building construction industry in Nigeria. Journal of Construction Business and Management, 4(2), 1-10.

Akinwunmi, A, Gameson, R, Hammond, F and Olomolaiye, P (2007) Mortgage insurance and housing finance in emerging economies. In: Boyd, D (Ed.), Proceedings 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK. Association of Researchers in Construction Management, Vol. 1, 243–52.

Akkoyun, I and Dikbas, A (2008) Performance in construction: a literature review of research in construction management journals.. In: Dainty, A (Ed.), Proceedings 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK. Association of Researchers in Construction Management, Vol. 2, 717–26.

Akmam Syed Zakaria, S and Amtered El-Abidi, K M (2021) Economic effects of migrant labor on industrialized building system adoption in the Malaysian construction industry. Architectural Engineering and Design Management, 17(01–02), 50–66.

Akmam Syed Zakaria, S, Gajendran, T, Rose, T and Brewer, G (2018) Contextual, structural and behavioural factors influencing the adoption of industrialised building systems: a review. Architectural Engineering and Design Management, 14(01–02), 3–26.

Akmam Syed Zakaria, S, Gajendran, T, Skitmore, M and Brewer, G (2018) Key factors influencing the decision to adopt industrialised building systems technology in the Malaysian construction industry: an inter-project perspective. Architectural Engineering and Design Management, 14(01–02), 27–45.

Akotia, J and Fortune, C (2012) Early stage evaluation of the socio-economic benefits of built environment housing regeneration projects. In: Smith, S.D (Ed.), Proceedings 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK. Association of Researchers in Construction Management, 1279–88.

Akotia, J, Manu, E, Opoku, A and Sackey, E (2020) The role of built environment practitioners in driving the socio-economic sustainability aspects of sustainable regeneration. Construction Economics and Building, 20(02), 89-108.

Akotia, J, Opoku, A, Egbu, C and Fortune, C (2016) Exploring the knowledge ‘base’ of practitioners in the delivery of sustainable regeneration projects . Construction Economics and Building, 16(02), 14-26.

Akpan, E O P and Igwe, O (2001) Methodology for Determining Price Variation in Project Execution. Journal of Construction Engineering and Management, 127(05), 367–73.

Akplotsyi, R and Mahdjoubi, L (2011) Effects of learning styles on engaging children in school projects. In: Egbu, C and Lou, E C W (Eds.), Proceedings 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK. Association of Researchers in Construction Management, 331–9.

Aksözen, M, Hassler, U and Kohler, N (2017) Reconstitution of the dynamics of an urban building stock. Building Research & Information, 45(03), 239-58.

Aksözen, M, Hassler, U, Rivallain, M and Kohler, N (2017) Mortality analysis of an urban building stock. Building Research & Information, 45(03), 259-77.

Aksenova, G, Kiviniemi, A, Kocaturk, T and Lejeune, A (2019) From Finnish AEC knowledge ecosystem to business ecosystem: lessons learned from the national deployment of BIM. Construction Management and Economics, 37(06), 317–35.

Aksorn, T and Hadikusumo, B H W (2007) Gap analysis approach for construction safety program improvement. Journal of Construction in Developing Countries, 12(1), 77-97.

Aksorn, T and Hadikusumo, B H W (2008) Measuring effectiveness of safety programmes in the Thai construction industry. Construction Management and Economics, 26(04), 21.

Aksorn, T and Hadikusumo, B H W (2007) The unsafe acts and the decision-to-err factors of Thai construction workers. Journal of Construction in Developing Countries, 12(1), 1-25.

Aksoy Tırmıkçı, C and Yavuz, C (2019) Environmental life cycle analysis of a fixed PV energy system and a two-axis sun tracking PV energy system in a low-energy house in Turkey. Smart and Sustainable Built Environment, 8(05), 391–9.

Akujuru, V A and Ruddock, L (2015) Dichotomising compulsory land acquisition and land contamination valuations. International Journal of Disaster Resilience in the Built Environment, 6(03), 268-88.

Al Ahbabi, M and Alshawi, M (2015) BIM for client organisations: A continuous improvement approach. Construction Innovation, 15(04), 402-8.

Al Ghazal, H (2017) Post-occupancy evaluation involving end users in Saudi Arabian office buildings through the use of a shortened quality function deployment method, Unpublished PhD Thesis, Department of Mechanical, Aerospace & Civil Engineering, University of Manchester.

Al Haj, R A and El-Sayegh, S M (2015) Time–Cost Optimization Model Considering Float-Consumption Impact. Journal of Construction Engineering and Management, 141(05).

Al Hattab, M, Zankoul, E, Barakat, M and Hamzeh, F (2018) Crane overlap and operational flexibility: Balancing utilization, duration, and safety. Construction Innovation, 18(01), 43-63.

AL Mousli, M H and El-Sayegh, S M (2016) Assessment of the design–construction interface problems in the UAE. Architectural Engineering and Design Management, 12(05), 353–66.

Al Nasseri, H A, Widen, K and Aulin, R (2016) A taxonomy of planning and scheduling methods to support their more efficient use in construction project management. Journal of Engineering, Design and Technology, 14(03), 580-601.

Al Nasseri, H and Aulin, R (2016) Enablers and barriers to project planning and scheduling based on construction projects in Oman. Journal of Construction in Developing Countries, 21(2), 1-20.

Al Nasseri, H and Aulin, R (2016) Understanding management roles and organisational behaviours in planning and scheduling based on construction projects in Oman. Journal of Construction in Developing Countries, 21(1), 1-18.

Al Neyadi, A (2019) Sustainable and digital strategies for enhancing United Arab Emirates construction industry competiveness, Unpublished PhD Thesis, Faculty of Science and Engineering, University of Wolverhampton.

Al Qady, M and Kandil, A (2010) Concept Relation Extraction from Construction Documents Using Natural Language Processing. Journal of Construction Engineering and Management, 136(03), 294–302.

Al Qady, M and Kandil, A (2013) Document Management in Construction: Practices and Opinions. Journal of Construction Engineering and Management, 139(10).

Al Sarraj, Z M (1990) Formal Development of Line‐of‐Balance Technique. Journal of Construction Engineering and Management, 116(04), 689–704.

Al Shamsi, H A A (2015) construction industry in Abu Dhabi, Unpublished PhD Thesis, , University of Wolverhampton.

Al Yahya, M, Skitmore, M, Bridge, A, Nepal, M and Cattell, D (2018) e-Tendering readiness in construction: the posterior model. Construction Innovation, 18(02), 0.

Al Zarooni, S, Abdou, A and Lewis, J (2011) Improving the Client Briefing for UAE Public Healthcare Projects: Space Programming Guidelines. Architectural Engineering and Design Management, 7(04), 251–65.

Al-Azemi, K (2012) Risk management for build, operate and transfer projects within Kuwait, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Al-Balushi, R A, Fortune, C and Kaka, A (2005) The implementation of corporate strategies through the use of an enterprise project management model (EPMM): the case of telecommunication operator. In: Khosrowshahi, F (Ed.), Proceedings 21st Annual ARCOM Conference, 7-9 September 2005, London, UK. Association of Researchers in Construction Management, Vol. 2, 635–44.

Al-Balushi, R A, Kaka, A and Fortune, C (2004) Project management processes and the achievement of organizational strategies: the case of telecomm. operator. In: Khosrowshahi, F (Ed.), Proceedings 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK. Association of Researchers in Construction Management, Vol. 2, 1155–64.

Al-Bataineh, M, AbouRizk, S and Parkis, H (2013) Using Simulation to Plan Tunnel Construction. Journal of Construction Engineering and Management, 139(05), 564–71.

Al-Bayati, A J (2019) Satisfying the Need for Diversity Training for Hispanic Construction Workers and Their Supervisors at US Construction Workplaces: A Case Study. Journal of Construction Engineering and Management, 145(06).

Al-Bayati, A J and Al-Zubaidi, H A (2018) Inventory of Nanomaterials in Construction Products for Safety and Health. Journal of Construction Engineering and Management, 144(09).

Al-Bayati, A J and Panzer, L (2019) Reducing Damage to Underground Utilities: Lessons Learned from Damage Data and Excavators in North Carolina. Journal of Construction Engineering and Management, 145(12).

Al-Bayati, A J and Panzer, L (2020) Reducing Damages to Underground Utilities: Importance of Stakeholders’ Behaviors. Journal of Construction Engineering and Management, 146(09).

Al-Bayati, A J, Abudayyeh, O, Fredericks, T and Butt, S E (2017) Managing Cultural Diversity at U.S. Construction Sites: Hispanic Workers’ Perspectives. Journal of Construction Engineering and Management, 143(09).

Al-Bayati, A J, Abudayyeh, O, Fredericks, T and Butt, S E (2017) Reducing Fatality Rates of the Hispanic Workforce in the U.S. Construction Industry: Challenges and Strategies. Journal of Construction Engineering and Management, 143(03).

Al-Bayati, A J, Al-Kasasbeh, M, Awolusi, I, Abudayyeh, O and Umar, T (2021) Trends of Occupational Fatal and Nonfatal Injuries in Electrical and Mechanical Specialty Contracting Sectors: Necessity for a Learning Investigation System. Journal of Construction Engineering and Management, 147(07).

Al-Bazi, A and Dawood, N (2018) Simulation-based optimisation using simulated annealing for crew allocation in the precast industry. Architectural Engineering and Design Management, 14(01–02), 109–26.

Al-Bizri, S (1997) Design management plan generator (DMPG): a knowledge-based system for planning the design processes in the construction industry, Unpublished PhD Thesis, Department of Construction Management and Engineering, University of Reading.

Al-Bizri, S and Gray, C (2014) A decision support framework for HCAI risk assessment and design briefing of healthcare facilities. In: Raiden, A and Aboagye-Nimo, E (Eds.), Proceedings 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK, Association of Researchers in Construction Management, 205–13.

Al-bizri, S and Gray, C (2010) Management framework for technology clusters implementation. Construction Management and Economics, 28(07), 82.

Al-Dahash, H, Thayaparan, M and Kulatunga, U (2016) Understanding the Terminologies: Disaster, Crisis and Emergency. In: Chan, P W and Neilson, C J (Eds.), Proceedings 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester UK. Association of Researchers in Construction Management, 1191–1200.

Al-Fahad, J Y (2012) Reform of building codes, regulations, administration and enforcement in Kuwait within the legal, administrative, technical and social framework , Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Al-Fahad, J Y (2001) Reform of building codes, regulations, administration and enforcement in Kuwait: within the legal, administrative, technical and social framework, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Al-Gahtani, K S (2009) Float Allocation Using the Total Risk Approach. Journal of Construction Engineering and Management, 135(02), 88–95.

Al-Gahtani, K, Alsulaihi, I, Ali, M and Marzouk, M (2017) Production of green concrete using recycled waste aggregate and byproducts. Built Environment Project and Asset Management, 7(04), 413-25.

Al-Ghassani, A M (2003) Improving the structural design process: a knowledge management approach, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Al-Ghassani, A M, Carrillo, P M, Anumba, C J and Robinson, H S (2001) Software requirements for knowledge management in construction organizations. In: Akintoye, A (Ed.), Proceedings 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK. Association of Researchers in Construction Management, Vol. 1, 199–206.

Al-Ghassani, A M, Kamara, J M, Anumba, C J and Carrillo, P M (2004) An innovative approach to identifying knowledge management problems. Engineering, Construction and Architectural Management, 11(05), 349–57.

Al-Ghassani, A M, Kamara, J M, Anumba, C J and Carrillo, P M (2006) Prototype System for Knowledge Problem Definition. Journal of Construction Engineering and Management, 132(05), 516–24.

Al-Hajj, A and Hamani, K (2011) Material Waste in the UAE Construction Industry: Main Causes and Minimization Practices. Architectural Engineering and Design Management, 7(04), 221–35.

Al-Hajj, A and Horner, M W (1998) Modelling the running costs of buildings. Construction Management and Economics, 16(04), 459-70.

Al-Hammad, A M, Al-Mubaiyadh, S and Mahmoud, T (1996) Public versus private sector's assessment of problems facing the building maintenance industry in Saudi Arabia. Building Research & Information, 24(04), 245–54.

Al-Hammad, A M, Assaf, S A and Al-Hazmi, T (1996) Assessment of the types of public building maintenance contracts in Saudi Arabia. Building Research & Information, 24(06), 358–62.

Al-Harthi, A S A (2016) Modelling the relationship between client activities and construction procurement performance in Oman, Unpublished PhD Thesis, School of Civil and Building Engineering, Loughborough University.

Al-Hazmi, T A (1999) Project procurement system selection model (with particular reference to Saudi Arabia), Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Al-Homoud, M S and Khan, M M (2004) Assessing safety measures in residential buildings in Saudi Arabia. Building Research & Information, 32(04), 300–5.

Al-Homoud, M S, Abdou, A A and Khan, M M (2004) Safety design practices in residential buildings in Saudi Arabia. Building Research & Information, 32(06), 538–43.

Al-Humaidi, H M (2016) Construction Projects Bid or Not Bid Approach Using the Fuzzy Technique for Order Preference by Similarity FTOPSIS Method. Journal of Construction Engineering and Management, 142(12).

Al-Hussein, M, Alkass, S and Moselhi, O (2001) An algorithm for mobile crane selection and location on construction sites. Construction Innovation, 1(02), 91–105.

Al-Hussein, M, Alkass, S and Moselhi, O (2005) Optimization Algorithm for Selection and on Site Location of Mobile Cranes. Journal of Construction Engineering and Management, 131(05), 579–90.

Al-Hussein, M, Kumar, J, Sharma, V and Mah, D (2006) A knowledge-based automated development permit approval process in the housing industry. Engineering, Construction and Architectural Management, 13(03), 290–306.

Al-Jibouri, S and Mawdesley, M J (2001) Development and application of a stochastic based cost prediction model for construction. Journal of Financial Management of Property and Construction, 6(01), 61–9.

Al-Jibouri, S and Ogink, G (2009) Proposed model for integrating RAMS method in the design process in construction. Architectural Engineering and Design Management, 5(04), 179–92.

Al-Jibouri, S H and Mawdesley, M J (2001) Design and experience with a computer game for teaching construction project planning and control. Engineering, Construction and Architectural Management, 8(05), 418–27.

Al-Joma, M and Mangin, J-C (2004) A scheduling model for repetitive activities. In: Khosrowshahi, F (Ed.), Proceedings 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK. Association of Researchers in Construction Management, Vol. 2, 1197–208.

Al-Kaisy, A and Nassar, K (2009) Developing a Decision Support Tool for Nighttime Construction in Highway Projects. Journal of Construction Engineering and Management, 135(02), 119–25.

Al-Kaisy, A and Nassar, K (2005) Nighttime construction issues revisited. Journal of Construction Research, 6(01), 139–56.

Al-Khalil, M I and Al-Ghafly, M A (1999) Important causes of delay in public utility projects in Saudi Arabia. Construction Management and Economics, 17(05), 647-55.

Al-Kharashi, A and Skitmore, M (2009) Causes of delays in Saudi Arabian public sector construction projects. Construction Management and Economics, 27(01), 3–23.

Al-Kheetan, M J, Rahman, M M and Chamberlain, D A (2018) Remediation and protection of masonry structures with crystallising moisture blocking treatment. International Journal of Building Pathology and Adaptation, 36(01), 77–92.

Al-Meshekeh, H S (2001) The effect of conflict management upon project effectiveness. Journal of Construction Procurement, 7(02), 15–30.

Al-Meshekeh, H S and Langford, D A (1999) Conflict management and construction project effectiveness: a review of the literature and development of a theoretical framework. Journal of Construction Procurement, 5(01), 58–75.

Al-Momani, A H (1996) Construction cost prediction for public school buildings in Jordan. Construction Management and Economics, 14(04), 311-7.

Al-Momani, A H (2000) Structuring information on residential building: a model of preference. Engineering, Construction and Architectural Management, 7(02), 179–90.

Al-Muqdadi, F (2020) Assessing the Potentials of Heritage Building Information Modelling (HBIM) in Damaged Heritage Reconstruction. In: Scott, L and Neilson, C J (Eds.), Proceedings 36th Annual ARCOM Conference, 7-8 September 2020, UK, Association of Researchers in Construction Management, 25-34.

Al-Musallami, A I and Assaf, S A (1996) Public owners' satisfaction with consultancy practices in Saudi Arabia. Building Research & Information, 24(03), 148–51.

Al-Muyeed, A and Afrin, R (2005) Effect of masonry infill for reducing the sway of rc frame using finite element modeling. Journal of Construction Research, 6(02), 293–306.

Al-Omari, J A (1992) Critique of aspects of development theory using construction industry in a capital-surplus developing economy as an exemplar, Unpublished PhD Thesis, Department of Construction Management and Engineering, University of Reading.

Al-Otaibi, M (2011) Evaluation of contractor performance for pre-selection in the Kingdom of Saudi Arabia, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Al-Otaibi, M and Price, A D F (2010) Analysis and evaluation of criteria for pre-selecting contractors in the Saudi Arabian construction sector. In: Egbu, C (Ed.), Proceedings 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK. Association of Researchers in Construction Management, Vol. 2, 1141–8.

Al-Otaibi, S (2010) A framework for improving the performance of standard design models in the Saudi Ministry of Interior projects, Unpublished PhD Thesis, School of Architecture, Building and Civil Engineering, Loughborough University.

Al-Qawasmi, J (2019) Examining indicators coverage in a sample of sustainable building assessment systems. Architectural Engineering and Design Management, 15(02), 101–20.

Al-Qawasmi, J (2016) Vernacular as a renewable resource: toward region-specific architecture in Saudi Arabia, a case from KFUPM. Architectural Engineering and Design Management, 12(02), 81–96.

Al-Reshaid, K, Kartam, N, Tewari, N and Al-Bader, H (2005) A project control process in pre-construction phases: Focus on effective methodology. Engineering, Construction and Architectural Management, 12(04), 351–72.

Al-Sabah, R, Menassa, C C and Hanna, A (2014) Evaluating impact of construction risks in the Arabian Gulf Region from perspective of multinational architecture, engineering and construction firms. Construction Management and Economics, 32(04), 382-402.

Al-saeed, Y W, Ahmed, A and Pärn, E A (2020) An 80-year projection of nZEB strategies in extreme climatic conditions of Iraq. International Journal of Building Pathology and Adaptation, 38(03), 472–92.

Al-Saeed, Y, Edwards, D J and Scaysbrook, S (2020) Automating construction manufacturing procedures using BIM digital objects (BDOs). Construction Innovation , 20(03), 345–77.

Al-Saeed, Y, Parn, E, Edwards, D J and Scaysbrook, S (2019) A conceptual framework for utilising BIM digital objects (BDO) in manufacturing design and production. Journal of Engineering, Design and Technology , 17(05), 960–84.

Al-Sehali, J (2001) A framework for total quality management in the construction industry in Bahrain, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Al-Shammari, M A (2014) An appraisal of the protocol that was published by the construction industry council (CIC) to facilitate the use of building information modelling (BIM) on projects. In: Raiden, A and Aboagye-Nimo, E (Eds.), Proceedings 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK, Association of Researchers in Construction Management, 623–32.

Al-Sharif, F and Kaka, A (2004) PFI/PPP topic coverage in construction journals. In: Khosrowshahi, F (Ed.), Proceedings 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK. Association of Researchers in Construction Management, Vol. 1, 711–9.

Al-Sharif, F and Kaka, A (2003) Potential of PFI/PPP as a financing source for public services projects in Saudi Arabia. In: Greenwood, D J (Ed.), Proceedings 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK. Association of Researchers in Construction Management, Vol. 1, 71–80.

Al-Sharif, F and Kaka, A (2005) Private finance intiative project's financial modelling. In: Khosrowshahi, F (Ed.), Proceedings 21st Annual ARCOM Conference, 7-9 September 2005, London, UK. Association of Researchers in Construction Management, Vol. 1, 287–94.

Al-Shawi, M and Hope, A E (1989) Expert systems and contractual disputes: extension of time under JCT 80. Construction Management and Economics, 7(01), 65-74.

Al-Shehri, Y (2015) Relationship between personality trait and multi-national construction workers safety performance in Saudi Arabia, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Al-Sibaie, E Z, Alashwal, A M, Abdul-Rahman, H and Zolkafli, U K (2014) Determining the relationship between conflict factors and performance of international construction projects. Engineering, Construction and Architectural Management, 21(04), 369-82.

Al-Sinaidi, A R (2005) Selecting the unit price bid: an analytical method. In: Khosrowshahi, F (Ed.), Proceedings 21st Annual ARCOM Conference, 7-9 September 2005, London, UK. Association of Researchers in Construction Management, Vol. 2, 751–61.

Al-Sobiei, O S, Arditi, D and Polat, G (2005) Managing Owner’s Risk of Contractor Default. Journal of Construction Engineering and Management, 131(09), 973–8.

Al-Sobiei, O S, Arditi, D and Polat, G (2005) Predicting the risk of contractor default in Saudi Arabia utilizing artificial neural network (ANN) and genetic algorithm (GA) techniques. Construction Management and Economics, 23(04), 423-30.

Al-Sudairi, A A (2007) Evaluating the effect of construction process characteristics to the applicability of lean principles. Construction Innovation, 7(01), 99–121.

Al-Sudairi, A A and Al-Motairi, M S (2010) Multi objective land use allocation model using priority-based goal programming technique. Construction Management and Economics, 28(02), 61.

Al-Tabtabai, H (2002) Construction procurement strategy selection using analytical hierarchy process. Journal of Construction Procurement, 8(02), 117–32.

Al-Tabtabai, H and Alex, A P (1999) Using genetic algorithms to solve optimization problems in construction. Engineering, Construction and Architectural Management, 6(02), 121–32.

Al-Tabtabai, H and Diekmann, J E (1992) Judgemental forecasting in construction projects. Construction Management and Economics, 10(01), 19-30.

Al-Tabtabai, H and Thomas, V P (2004) Negotiation and resolution of conflict using AHP: an application to project management. Engineering, Construction and Architectural Management, 11(02), 90–100.

Al-Tabtabai, H, Kartam, N, Flood, I and Alex, A P (1997) Expert judgment in forecasting construction project completion. Engineering, Construction and Architectural Management, 4(04), 271–93.

Al-Yami, A M and Price, A D F (2006) A framework for implementing sustainable construction in building briefing project. In: Boyd, D (Ed.), Proceedings 22nd Annual ARCOM Conference, 4-6 September 2006 Birmingham, UK. Association of Researchers in Construction Management, Vol. 1, 327–37.

Al-Yami, A M and Price, A D F (2005) Exploring conceptual linkages between value engineering and sustainable construction. In: Khosrowshahi, F (Ed.), Proceedings 21st Annual ARCOM Conference, 7-9 September 2005, London, UK. Association of Researchers in Construction Management, Vol. 1, 375–84.

Al-Yami, A M H (2008) An integrated approach to value management and sustainable construction during strategic briefing in Saudi construction projects, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Al-Zahrani, J (2013) The impact of contractors' attributes on construction project success, Unpublished PhD Thesis, Department of Mechanical, Aerospace & Civil Engineering, University of Manchester.

Al‐Bahar, J F and Crandall, K C (1990) Systematic Risk Management Approach for Construction Projects. Journal of Construction Engineering and Management, 116(03), 533–46.

Al‐Harbi, K M, Johnston, D W and Fayadh, H (1994) Building Construction Detailed Estimating Practices in Saudi Arabia. Journal of Construction Engineering and Management, 120(04), 774–84.

Al‐Jarallah, M I (1983) Construction Industry in Saudi Arabia. Journal of Construction Engineering and Management, 109(04), 355–68.

Alabi, A G F, Ajiboye, T K and Olusegun, H D (2010) Investigating the cutting forces in heat treated medium carbon steel when turning on a lathe machine. Journal of Engineering, Design and Technology, 8(01), 80–93.

Alabi, A S, Adegbile, M, Alabi, O, Abisuga, O, Oyewole, K and Oshodi, O (2017) Stakeholders’ role in disaster-risk-reduction of fire occurrences in Lagos Metropolis. International Journal of Disaster Resilience in the Built Environment, 8(04), 425-40.

Aladağ, H and Işık, Z (2019) Design and construction risks in BOT type mega transportation projects. Engineering, Construction and Architectural Management, 26(10), 2223–42.

Alade, K, Oyebade, A and Nzewi, N (2018) Assessment of the use of locally available materials for building construction in Ado-Ekiti, Nigeria. Journal of Construction Business and Management, 2(2), 36-41.

Alade, W A (2020) Environmental and socio-economic impacts of Ojodu-Berger road upgrade, Lagos, Nigeria. Journal of Construction Business and Management, 4(1), 24-33.

Alaghbari, M W, Kadir, R A and Salim, E A (2007) The significant factors causing delay of building construction projects in Malaysia. Engineering, Construction and Architectural Management, 14(02), 192–206.

Alaka, H A, Oyedele, L O, Owolabi, H A, Ajayi, S O, Bilal, M and Akinade, O O (2016) Methodological approach of construction business failure prediction studies: A review. Construction Management and Economics, 34(11), 808-42.

Alaka, H, Oyedele, L, Toriola-Coker, O, Owolabi, H, Akinade, O, Bilal, M and Ajayi, S (2015) Methodological approach of construction businesses failure prediction studies: A review. In: Raiden, A and Aboagye-Nimo, E (Eds.), Proceedings 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK. Association of Researchers in Construction Management, 1291–1300.

Alam, A, Bhat, M S, Farooq, H, Ahmad, B, Ahmad, S and Sheikh, A H (2018) Flood risk assessment of Srinagar city in Jammu and Kashmir, India. International Journal of Disaster Resilience in the Built Environment, 9(02), 114–29.

Alam, M K and Hasan, M D R (2010) Protection works against wave attacks in the haor areas of Bangladesh: Analysis of sustainability. Journal of Construction in Developing Countries, 15(2), 69-85.

Alam, M S and Haque, S M (2020) Seismic vulnerability evaluation of educational buildings of Mymensingh city, Bangladesh using rapid visual screening and index based approach. International Journal of Disaster Resilience in the Built Environment, 11(03), 379–402.

Alamri, R (2019) Development of a model for health and safety management in Saudi Arabian oil and gas construction projects, Unpublished PhD Thesis, Faculty of Science and Engineering, University of Wolverhampton.

Alananga, S, Lucian, C and Kusiluka, M M (2015) Significant cost-push factors in owner-built incremental housing construction in Tanzania. Construction Management and Economics, 33(08), 671-88.

Alani, A M, Petersen, A K, Chapman, K G and Khosrowshahi, F (2004) A proposed quantitative model for building repair and maintenance -theory, model development and application. Journal of Construction Research, 5(02), 193–210.

Alanjari, P, RazaviAlavi, S and AbouRizk, S (2015) Hybrid Genetic Algorithm-Simulation Optimization Method for Proactively Planning Layout of Material Yard Laydown. Journal of Construction Engineering and Management, 141(10).

Alao, O O and Jagboro, G O (2017) Assessment of causative factors for project abandonment in Nigerian public tertiary educational institutions. International Journal of Building Pathology and Adaptation, 35(01), 41–62.

Alao, O O, Jagboro, G O and Opawole, A (2018) Cost and time implications of abandoned project resuscitation. Journal of Financial Management of Property and Construction, 23(02), 185–201.

Alaqad, M, Gidado, K and Piroozfar, P (2015) Integrating value, risk and environmental management at the strategic definition stage . In: Raiden, A and Aboagye-Nimo, E (Eds.), Proceedings 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK. Association of Researchers in Construction Management, 145–154.

Alaqad, M, Gidado, K, Piroozfar, P, Alkhadim, M and Dorgham, A (2020) Efficacy of Value Management System in Building Projects: A UK Perspective. In: Scott, L and Neilson, C J (Eds.), Proceedings 36th Annual ARCOM Conference, 7-8 September 2020, UK, Association of Researchers in Construction Management, 146-155.

Alarcón, L F and Ashley, D B (1996) Modeling Project Performance for Decision Making . Journal of Construction Engineering and Management, 122(03), 265–73.

Alarcón, L F, Ashley, D B, de Hanily, A S, Molenaar, K R and Ungo, R (2011) Risk Planning and Management for the Panama Canal Expansion Program. Journal of Construction Engineering and Management, 137(10), 762–71.

Alarcón, L F, Rodríguez, A and Mourgues, C (2012) Impact of Machine-Failure Costs on Equipment Replacement Policies: Tunneling Company Case Study. Journal of Construction Engineering and Management, 138(06), 767–74.

Alarcón, L F and Bastias, A (2000) A computer environment to support the strategic decision-making process in construction firms. Engineering, Construction and Architectural Management, 7(01), 63–75.

Alasad, R and Motawa, I (2015) Dynamic demand risk assessment for toll road projects. Construction Management and Economics, 33(10), 799-817.

Alasad, R, Motawa, I and Ogunlana, S (2012) A system dynamics-based method for demand forecasting in infrastructure projects: a case of PPP projects. In: Smith, S.D (Ed.), Proceedings 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK. Association of Researchers in Construction Management, 327–36.

Alashwal, A M and Al-Sabahi, M H (2018) Risk factors in construction projects during unrest period in Yemen. Journal of Construction in Developing Countries, 23(2), 43-62.

Alashwal, A M and Chew, M Y (2017) Simulation techniques for cost management and performance in construction projects in Malaysia. Built Environment Project and Asset Management, 7(05), 534-45.

Alashwal, A M and Fong, P S (2015) Empirical Study to Determine Fragmentation of Construction Projects. Journal of Construction Engineering and Management, 141(07).

Alashwal, A, M, Fareed, N, F and Al-obaidi, K, M (2017) Determining Success Criteria and Success Factors for International Construction Projects for Malaysian Contractors . Construction Economics and Building, 17(02), 62-80.

Alasmari, H, Chrisp, M T and Bowles, G (2012) A framework for enhancing and improving the safety culture on Saudi construction sites. In: Smith, S.D (Ed.), Proceedings 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK. Association of Researchers in Construction Management, 475–85.

Alavipour, S M R and Arditi, D (2018) Optimizing Financing Cost in Construction Projects with Fixed Project Duration. Journal of Construction Engineering and Management, 144(04).

Alavipour, S R and Arditi, D (2019) Maximizing expected contractor profit using an integrated model. Engineering, Construction and Architectural Management, 26(01), 118–38.

Alazemi, T (2011) On the integration of value engineering in the procurement of public housing in the state of Kuwait, Unpublished PhD Thesis, Department of Mechanical, Aerospace & Civil Engineering, University of Manchester.

Alazemi, W (2013) Total quality management within the construction industry of Kuwait: the role of total quality management and its usage, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Alazzaz, F and Whyte, A (2015) Linking employee empowerment with productivity in off-site construction. Engineering, Construction and Architectural Management, 22(01), 21-37.

Albadra, D, Elamin, Z, Adeyeye, K, Polychronaki, E, Coley, D A, Holley, J and Copping, A (2021) Participatory design in refugee camps: comparison of different methods and visualization tools. Building Research & Information, 49(02), 248–64.

Albayoudh, K A F (2003) Assessment of total quality management in the Saudi construction industry organisations, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Albert, A and Hallowel, M (2013) Revamping occupational safety and health training: Integrating andragogical principles for the adult learner. Australasian Journal of Construction Economics and Building, 13(03), 128-140.

Albert, A, Hallowell, M R and Kleiner, B M (2014) Enhancing Construction Hazard Recognition and Communication with Energy-Based Cognitive Mnemonics and Safety Meeting Maturity Model: Multiple Baseline Study. Journal of Construction Engineering and Management, 140(02).

Albert, A, Hallowell, M R and Kleiner, B M (2014) Experimental field testing of a real-time construction hazard identification and transmission technique. Construction Management and Economics, 32(10), 1000-16.

Albert, A, Hallowell, M R, Kleiner, B, Chen, A and Golparvar-Fard, M (2014) Enhancing Construction Hazard Recognition with High-Fidelity Augmented Virtuality. Journal of Construction Engineering and Management, 140(07).

Albert, A, Hallowell, M R, Lingard, H and Kleiner, B M (2015) Multiple Baseline Testing: Experimental Method for Drawing Causal Inferences in Construction Engineering and Management Research. Journal of Construction Engineering and Management, 141(07).

Albert, A, Jeelani, I and Han, K (2020) Developing hazard recognition skill among the next-generation of construction professionals. Construction Management and Economics, 38(11), 1024–39.

Albogamy, A and Dawood, N (2015) Development of a client-based risk management methodology for the early design stage of construction processes: Applied to the KSA. Engineering, Construction and Architectural Management, 22(05), 493-515.

AlChaer, E and Issa, C A (2020) Engineering Productivity Measurement: A Novel Approach. Journal of Construction Engineering and Management, 146(08).

Aldaiyat, R M R E (2017) Perception eccentricities in risk time dimension of construction professionals in the state of Kuwait, Unpublished PhD Thesis, School of Civil and Building Engineering, Loughborough University.

Alderman, N and Ivory, C (2010) Service-led projects: understanding the meta-project context. Construction Management and Economics, 28(11), 1131–43.

Aldhaheri, M, Bakchan, A and Sandhu, M A (2018) A structural equation model for enhancing effectiveness of engineering, procurement and construction (EPC) major projects. Engineering, Construction and Architectural Management, 25(09), 1226–52.

Aldridge, G, Pasquire, C, Gibb, A and Blismas, N G (2001) Methods for measuring the "unmeasurable": evaluating the benefits of pre-assembly and standardization in construction. In: Akintoye, A (Ed.), Proceedings 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK. Association of Researchers in Construction Management, Vol. 1, 311–9.

Aleithawe, I, Sinno, R R and McAnally, W H (2012) Right-of-Way Acquisition Duration Prediction Model for Highway Construction Projects. Journal of Construction Engineering and Management, 138(04), 540–4.

Alenazi, E O N (2018) Using BIM for delay management in public sector construction projects in KSA, Unpublished PhD Thesis, School of Architecture, Building and Civil Engineering, Loughborough University.

Alencar, C T (2000) Highway concessions in Brazil: an analysis towards the feasibility of the securitization. Journal of Financial Management of Property and Construction, 5(03), 159–69.

Alencastro, J , Fuertes, A and de Wilde, P (2016) Improving the Quality Management Systems for Energy-Efficient Social Housing Projects. In: Chan, P W and Neilson, C J (Eds.), Proceedings 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester UK. Association of Researchers in Construction Management, 843–852.

Alencastro, J, Fuertes, A and de Wilde, P (2020) Quality Management in UK Social Housing Projects: Addressing Thermal Performance. In: Scott, L and Neilson, C J (Eds.), Proceedings 36th Annual ARCOM Conference, 7-8 September 2020, UK, Association of Researchers in Construction Management, 156-165.

Alex, D P, Al Hussein, M, Bouferguene, A and Fernando, S (2010) Artificial Neural Network Model for Cost Estimation: City of Edmonton’s Water and Sewer Installation Services. Journal of Construction Engineering and Management, 136(07), 745–56.

Alexander, D, Hallowell, M and Gambatese, J (2017) Precursors of Construction Fatalities. I: Iterative Experiment to Test the Predictive Validity of Human Judgment. Journal of Construction Engineering and Management, 143(07).

Alexander, D, Hallowell, M and Gambatese, J (2017) Precursors of Construction Fatalities. II: Predictive Modeling and Empirical Validation. Journal of Construction Engineering and Management, 143(07).

Alfaraj, H M and Qin, S (2011) Operationalising CMMI: integrating CMMI and CoBIT perspective. Journal of Engineering, Design and Technology, 9(03), 323-35.

Alfieri, E, Seghezzi, E, Sauchelli, M, Di Giuda, G M and Masera, G (2020) A BIM-based approach for DfMA in building construction: framework and first results on an Italian case study. Architectural Engineering and Design Management, 16(04), 247–69.

Alfred Olatunji, O (2016) Blending 'fair dinkum' into group assessment of construction students. International Journal of Construction Education and Research, 12(04), 270-84.

Algarni, A M, Arditi, D and Polat, G (2007) Build-Operate-Transfer in Infrastructure Projects in the United States. Journal of Construction Engineering and Management, 133(10), 728–35.

Alhajeri, M A (2004) Post-construction liabilities for latent defects in building and construction contracts: the theoretical foundations and the allocation of risk a comparative study in Kuwaiti, French and English law, Unpublished PhD Thesis, Department of Law, University of Essex.

Alharbi, M (2013) Architectural management: a strategic framework to achieve competitiveness, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Alharbi, M, Emmitt, S and Demian, P (2015) What is architectural management? Towards a pragmatic definition. Engineering, Construction and Architectural Management, 22(02), 151-68.

Alharthi, A, Soetanto, R and Edum-Fotwe, F (2014) The changing role of the public client in construction procurement. In: Raiden, A and Aboagye-Nimo, E (Eds.), Proceedings 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK, Association of Researchers in Construction Management, 403–12.

Alhasan, S, Amoudi, O, Tong, M and Kumar, B (2019) Effectiveness of Adopting BIM on Quantity Surveying Profession During the Project Life Cycle. In: Gorse, C and Neilson, C J (Eds.), Proceedings 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK Association of Researchers in Construction Management, 273-282.

Alhazmi, T and McCaffer, R (2000) Project Procurement System Selection Model. Journal of Construction Engineering and Management, 126(03), 176–84.

Alhmoudi, A A and Aziz, Z (2016) Integrated framework for early warning system in UAE. International Journal of Disaster Resilience in the Built Environment, 7(04), 361-73.

Alhozaimy, A M and Al-Negheimish, A I (1999) Introducing and Managing Quality Scheme for RMC Industry in Saudi Arabia. Journal of Construction Engineering and Management, 125(04), 249–55.

Alhumaidi, H M (2015) Construction Contractors Ranking Method Using Multiple Decision-Makers and Multiattribute Fuzzy Weighted Average. Journal of Construction Engineering and Management, 141(04).

Alhusban, A A, Alhusban, S A and Al-Betawi, Y N (2019) Assessing the impact of urban Syrian refugees on the urban fabric of Al Mafraq city architecturally and socially. International Journal of Disaster Resilience in the Built Environment, 10(02–03), 99–129.

Ali Khan, M S, Suresh, A and Ramaiah, N S (2016) Numerical study of magnetic circuit response in magneto-rheological damper. Journal of Engineering, Design and Technology, 14(01), 196-210.

Ali, A (2018) Development of a framework for sustainable construction waste management: a case study of three major Libyan cities, Unpublished PhD Thesis, Faculty of Science and Engineering, University of Wolverhampton.

Ali, A K (2019) A case study in developing an interdisciplinary learning experiment between architecture, building construction, and construction engineering and management education. Engineering, Construction and Architectural Management, 26(09), 2040–59.

Ali, A S, Azmi, N F and Baaki, T K (2018) Cost performance of building refurbishment works: the case of Malaysia. International Journal of Building Pathology and Adaptation, 36(01), 41–62.

Ali, A, Wang, H, Soomro, M A and Islam, T (2020) Shared Leadership and Team Creativity: Construction Industry Perspective. Journal of Construction Engineering and Management, 146(10).

Ali, F M M and Jones, K (2013) Negotiating community resilience in the city in a time of political change and deficit reduction. International Journal of Disaster Resilience in the Built Environment, 4(01), 9-22.

Ali, F, Chowdary, B V and Gonzales, L (2013) An integrated design approach for rapid product development: A case study through application of reverse engineering, re-engineering and fast prototyping tools. Journal of Engineering, Design and Technology, 11(02), 178-89.

Ali, G M, Kosa, J, Bouferguene, A and Al-Hussein, M (2021) Competitive Assessment of Ice and Frozen Silt Mat for Crane Ground Support Using Finite-Element Analysis. Journal of Construction Engineering and Management, 147(06).

Ali, G M, Olearczyk, J, Bouferguene, A and Al-Hussein, M (2021) Implementation of Combined Loading to Calculate Ground Bearing Pressure under Crawler Crane Tracks. Journal of Construction Engineering and Management, 147(07).

Ali, H M and Ruddock, L (2000) The impact of portfolio strategy onthe 'style' performance of UK property companies. Journal of Financial Management of Property and Construction, 5(03), 123–33.

Ali, M M and Elazouni, A (2009) Finance-based CPM/LOB scheduling of projects with repetitive non-serial activities. Construction Management and Economics, 27(09), 839–56.

Ali, R A, Mannakkara, S and Wilkinson, S (2020) Factors affecting successful transition between post-disaster recovery phases: a case study of 2010 floods in Sindh, Pakistan. International Journal of Disaster Resilience in the Built Environment, 11(05), 597–614.

Ali, S, Zayed, T and Hegab, M (2007) Modeling the Effect of Subjective Factors on Productivity of Trenchless Technology Application to Buried Infrastructure Systems. Journal of Construction Engineering and Management, 133(10), 743–8.

Ali, Y, Sabir, M and Muhammad, N (2019) A comparative input-output analysis of the construction sector in three developing economies of South Asia. Construction Management and Economics, 37(11), 643–58.

Aliakbarlou, S, Wilkinson, S and Costello, S B (2017) Exploring construction client values and qualities: Are these two distinct concepts in construction studies?. Built Environment Project and Asset Management, 7(03), 234-52.

Aliero, B A (1994) Utilisation of environmental impact assessment technique in the assessment of impact of human interference on natural ecology of estuaries: a case study of Mersey Estuary, Unpublished PhD Thesis, Environmental Resources Unit, University of Salford.

Alinaitwe, H and Ayesiga, R (2013) Success factors for the implementation of public-private partnerships in the construction industry in Uganda. Journal of Construction in Developing Countries, 18(2), 1-14.

Alinaitwe, H M (2009) Prioritising lean construction barriers in uganda's construction industry. Journal of Construction in Developing Countries, 14(1), 15-30.

Alinaitwe, H M, Widén, K, Mwakali, J and Hansson, B (2007) Innovation barriers and enablers that affect productivity in Uganda building industry. Journal of Construction in Developing Countries, 12(1), 59-75.

Alinaitwe, H, Apolot, R and Tindiwensi, D (2013) Investigation into the causes of delays and cost overruns in uganda's public sector construction projects. Journal of Construction in Developing Countries, 18(2), 33-47.

Alinaitwe, H, Nyamutale, W and Tindiwensi, D (2014) Design phase constructability improvement strategies for highway projects in Uganda. Journal of Construction in Developing Countries, 19(1), 127-40.

Aliu, J and Aigbavboa, C O (2019) Employers’ perception of employability skills among built-environment graduates. Journal of Engineering, Design and Technology , 18(04), 847–64.

Aliyu, A A (2014) Product stewardship as a novel sustainability pathway for the UK precast concrete industry , Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Aljassmi, H and Han, S (2013) Analysis of Causes of Construction Defects Using Fault Trees and Risk Importance Measures. Journal of Construction Engineering and Management, 139(07), 870–80.

Aljassmi, H, Han, S and Davis, S (2016) Analysis of the Complex Mechanisms of Defect Generation in Construction Projects. Journal of Construction Engineering and Management, 142(02).

Aljassmi, H, Han, S and Davis, S (2014) Project Pathogens Network: New Approach to Analyzing Construction-Defects-Generation Mechanisms. Journal of Construction Engineering and Management, 140(01).

Alkaabi, J A (1994) Improved materials management using automatic identification techniques, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Alkalbani, S, Rezgui, Y, Vorakulpipat, C and Wilson, I E (2013) ICT adoption and diffusion in the construction industry of a developing economy: The case of the sultanate of Oman. Architectural Engineering and Design Management, 9(01), 62-75.

Alkass, S and Harris, F (1988) Expert System for Earthmoving Equipment Selection in Road Construction. Journal of Construction Engineering and Management, 114(03), 426–40.

Alkass, S and Harris, F C (1991) Development of an integrated system for planning earthwork operations in road construction. Construction Management and Economics, 9(03), 263-89.

Alkass, S T (1988) An expert system applied to earthmoving operations and equipment selection, Unpublished PhD Thesis, Department of Civil Engineering, Loughborough University.

Alkass, S, Alhussein, M and Moselhi, O (1997) Computerized crane selection for construction projects. In: Stephenson, P (Ed.), Proceedings 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK. Association of Researchers in Construction Management, Vol. 2, 427–36.

Alkass, S, Aronian, A and Moselhi, O (1993) Computer‐Aided Equipment Selection for Transporting and Placing Concrete. Journal of Construction Engineering and Management, 119(03), 445–65.

Alkass, S, Mazerolle, M and Harris, F C (1996) Construction delay analysis techniques. Construction Management and Economics, 14(05), 375-94.

Alkass, S, Mazerolle, M and Harris, F C (1998) Note - Rigour in research and peer-review: a reply. Construction Management and Economics, 16(02), 139-40.

Alkass, S, Mazerolle, M, Tribaldos, E and Harris, F C (1995) Computer aided construction delay analysis and claims preparation. Construction Management and Economics, 13(04), 335-52.

Alkatheeri, A (2018) An investigative study on the relationship between organizational factors and knowledge management effectiveness in UAE public organizations: the case study of Abu Dhabi, Unpublished PhD Thesis, Faculty of Science and Engineering, University of Wolverhampton.

Alketbi, S R (2020) Effective implementation of value engineering in the housing construction programmes of the UAE, Unpublished PhD Thesis, Faculty of Science and Engineering, University of Wolverhampton.

Alkhadim, M (2019) Risk management: the effect of perceived safety on users behaviour in crowded large space buildings, Unpublished PhD Thesis, Brighton Business School, University of Brighton.

AlKhaiat, H and Fereig, S M (1996) The role of precast concrete systems in Kuwaiti housing projects. Building Research & Information, 24(06), 374–8.

Alkharmany, A (2017) Project management: the effect of Saudi national culture on the attitudes of key stakeholders towards delay in construction projects in Saudi Arabia, Unpublished PhD Thesis, School of Environment and Technology, University of Brighton.

Alkilani, S, Jupp, J and Sawhney, A (2013) Issues of construction health and safety in developing countries: a case of Jordan. Australasian Journal of Construction Economics and Building, 13(03), 141-156.

Alkizim, A O and Green, S (2005) Robustness in value engineering. In: Khosrowshahi, F (Ed.), Proceedings 21st Annual ARCOM Conference, 7-9 September 2005, London, UK. Association of Researchers in Construction Management, Vol. 2, 833–40.

Alkoc, E and Erbatur, F (1997) Productivity improvement in concreting operations through simulation models. Building Research & Information, 25(02), 82–91.

Alkoc, E and Erbatur, F (1998) Simulation in concreting operations: a comparison of models and resource combinations. Engineering, Construction and Architectural Management, 5(02), 159–73.

Alkoc, E and Erbatur, F (1998) Site expert: a prototype knowledge-based expert system. Engineering, Construction and Architectural Management, 5(03), 238–51.

Alkriz, K and Mangin, J-C (2005) A new model for optimizing the location of cranes and construction facilities using genetic algorithms. In: Khosrowshahi, F (Ed.), Proceedings 21st Annual ARCOM Conference, 7-9 September 2005, London, UK. Association of Researchers in Construction Management, Vol. 2, 981–91.

Allam, S I G (1988) Multi-project scheduling: a new categorization for heuristic scheduling rules in construction scheduling problems. Construction Management and Economics, 6(02), 93-115.

Allan, C, Sommerville, J, Kennedy, P and Robertson, H (2000) A business unit approach to construction process re-engineering. In: Akintoye, A (Ed.), Proceedings 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK. Association of Researchers in Construction Management, Vol. 1, 335–42.

Allan, P and Bryant, M (2014) The attributes of resilience: A tool in the evaluation and design of earthquake-prone cities. International Journal of Disaster Resilience in the Built Environment, 5(02), 109-29.

Allan, S, Jones, K and Walker, S (2006) Retrofitting e-learning to an existing distance learning course. Architectural Engineering and Design Management, 2(01), 137–47.

Alleman, D and Lee, E (2020) Mitigating the legal challenges of imposing disincentives on nonperforming transportation projects. Engineering, Construction and Architectural Management, 27(10), 2859–91.

Allen, C and Smallwood, J (2008) Improving construction planning through 4D planning. Journal of Engineering, Design and Technology, 6(01), 7–20.

Allen, D, Hartley, R, Whitehead, P, Smith, M, Dickinson, I and Gorse, C (2010) The potential for using interactive scenarios in the teaching and learning of health and safety. In: Egbu, C (Ed.), Proceedings 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK. Association of Researchers in Construction Management, Vol. 1, 291–300.

Allen, P M (2008) The importance of complexity for the research agenda in the built environment. Architectural Engineering and Design Management, 4(02), 5–14.

Allen, S (1997) Information management for housing maintenance: a systematic view, Unpublished PhD Thesis, Department of Surveying, University of Salford.

Allen, S and Hinks, J (1996) Note - How long should housing last? Some implications of the age and probable life of housing in England: a comment. Construction Management and Economics, 14(06), 529-34.

Allender, C, Sutrisna, M and Zaman, A U (2017) Towards developing robust climate risk management strategies in the estuarine park of the Swan River, Western Australia. International Journal of Disaster Resilience in the Built Environment, 8(04), 441-62.

Allison, L and Kaminsky, J (2017) Safety Communication Networks: Females in Small Work Crews. Journal of Construction Engineering and Management, 143(08).

Allmon, E, Haas, C T, Borcherding, J D and Goodrum, P M (2000) U.S. Construction Labor Productivity Trends, 1970–1998. Journal of Construction Engineering and Management, 126(02), 97–104.

Alloh, B O (2014) The application of planning law for environmental protection and improvement in Nigeria. In: Raiden, A and Aboagye-Nimo, E (Eds.), Proceedings 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK, Association of Researchers in Construction Management, 603–9.

Allotey, N K, Arku, G and Amponsah, P E (2010) Earthquake-disaster preparedness: the case of Accra. International Journal of Disaster Resilience in the Built Environment, 1(02), 140–56.

Allouche, E N, Ariaratnam, S T and AbouRizk, S M (2001) Applications of Horizontal Characterization Techniques in Trenchless Construction. Journal of Construction Engineering and Management, 127(06), 476–84.

Allouche, E N, Ariaratnam, S T and Lueke, J S (2000) Horizontal Directional Drilling: Profile of an Emerging Industry. Journal of Construction Engineering and Management, 126(01), 68–76.

Allouche, E N, Ariaratnam, S T and MacLeod, C W (2003) Software for Planning and Cost Control in Directional Drilling Projects. Journal of Construction Engineering and Management, 129(04), 446–53.

Alluqmani, A E (2014) Design and behaviour of R.C. beams to ACI318-and-SBC304; and EC2 codes when subjected to asymmetric loading. Journal of Engineering, Design and Technology, 12(02), 158-76.

Almås, A-J and Hygen, H O (2012) Impacts of sea level rise towards 2100 on buildings in Norway. Building Research & Information, 40(03), 245-59.

AlMaian, R Y, Needy, K L, Walsh, K D and Alves, T d C L (2016) A Qualitative Data Analysis for Supplier Quality-Management Practices for Engineer-Procure-Construct Projects. Journal of Construction Engineering and Management, 142(02).

Almarri, K and Boussabaine, H (2017) Interdependency of the critical success factors and ex-post performance indicators of PPP projects. Built Environment Project and Asset Management, 7(05), 546-56.

Almarri, K, Aljarman, M and Boussabaine, H (2019) Emerging contractual and legal risks from the application of building information modelling. Engineering, Construction and Architectural Management, 26(10), 2307–25.

Almarri, K, Alzahrani, S and Boussabaine, H (2019) An evaluation of the impact of risk cost on risk allocation in public private partnership projects. Engineering, Construction and Architectural Management, 26(08), 1696–711.

Almarshad, A, Motawa, I and Ogunlana, S (2010) Knowledge management for public building maintenance in Kuwait. In: Egbu, C (Ed.), Proceedings 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK. Association of Researchers in Construction Management, Vol. 2, 877–86.

Almås, A-J, Lisø, K R, Hygen, H O, Øyen, C F and Thue, J V (2011) An approach to impact assessments of buildings in a changing climate. Building Research & Information, 39(03), 227–38.

Almatroushi, H, Hariga, M, As'ad, R and Al-Bar, A (2020) The multi resource leveling and materials procurement problem: an integrated approach. Engineering, Construction and Architectural Management, 27(09), 2135–61.

Almazrouei, M, Khalid, K, Abdallah, S and Davidson, R (2019) Assessing the health, safety, and environment culture in the United Arab Emirates oil and gas industry. Journal of Engineering, Design and Technology , 18(02), 495–512.

Almeida, L, Tam, V W, Le, K N and She, Y (2020) Effects of occupant behaviour on energy performance in buildings: a green and non-green building comparison. Engineering, Construction and Architectural Management, 27(08), 1939–62.

Almeida, N, Sousa, V, Alves Dias, L and Branco, F (2010) A framework for combining risk-management and performance-based building approaches. Building Research & Information, 38(02), 74.

Almén, L and Larsson, T J (2014) Health and safety coordinators in building projects. Built Environment Project and Asset Management, 4(03), 251-63.

Almusharraf, A and Whyte, A (2016) Task-based defect management: Anatomical classification. Built Environment Project and Asset Management, 6(03), 345-58.

Alnasseri N, Osborne A and Steel G (2013) Organizational culture, leadership style and effectiveness: a case study of Middle Eastern construction clients . In: Smith, S D and Ahiaga-Dagbui, D D (Eds.), Proceedings 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK, Association of Researchers in Construction Management, 393–403.

Alnuaimi, A S, Taha, R A, Al Mohsin, M and Al-Harthi, A S (2010) Causes, Effects, Benefits, and Remedies of Change Orders on Public Construction Projects in Oman. Journal of Construction Engineering and Management, 136(05), 615–22.

Aloini, D, Dulmin, R, Mininno, V and Ponticelli, S (2012) A conceptual model for construction supply chain management implementation. In: Smith, S.D (Ed.), Proceedings 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK. Association of Researchers in Construction Management, 675–85.

Alomari, K A, Gambatese, J A and Tymvios, N (2018) Risk Perception Comparison among Construction Safety Professionals: Delphi Perspective. Journal of Construction Engineering and Management, 144(12).

Alosaimi, H (2019) Embedding knowledge management strategies in the Kingdom of Saudi Arabia construction industry, Unpublished PhD Thesis, Faculty of Science and Engineering, University of Wolverhampton.

AlOtaibi, M, El-Rayes, K and Altuwaim, A (2021) Optimizing the Renovation Scheduling of Leased Residential Buildings to Minimize Total Project Cost. Journal of Construction Engineering and Management, 147(07).

Alqady, M (2012) Leveraging text content for management of construction project documents, Unpublished PhD Thesis, Department of Civil Engineering, Purdue University.

Alqahtani, A and Whyte, A (2013) Artificial neural networks incorporating cost significant Items towards enhancing estimation for (life-cycle) costing of construction projects. Australasian Journal of Construction Economics and Building, 13(03), 51-64.

Alqahtani, A and Whyte, A (2016) Estimation of life-cycle costs of buildings: Regression vs artificial neural network. Built Environment Project and Asset Management, 6(01), 30-43.

Alqahtani, A and Whyte, A (2016) Evaluation of non-cost factors affecting the life cycle cost: an exploratory study. Journal of Engineering, Design and Technology, 14(04), 818-34.

AlQahtany, A, Rezgui, Y and Li, H (2013) A proposed model for sustainable urban planning development for environmentally friendly communities. Architectural Engineering and Design Management, 9(03), 176-94.

Alroomi, A, Jeong, D H S and Oberlender, G D (2012) Analysis of Cost-Estimating Competencies Using Criticality Matrix and Factor Analysis. Journal of Construction Engineering and Management, 138(11), 1270–80.

Alruqi, W M and Hallowell, M R (2019) Critical Success Factors for Construction Safety: Review and Meta-Analysis of Safety Leading Indicators. Journal of Construction Engineering and Management, 145(03).

Alruwaythi, O and Goodrum, P (2019) A Difference in Perspective: Impact of Different Formats of Engineering Information and Spatial Cognition on Craft-Worker Eye-Gaze Patterns. Journal of Construction Engineering and Management, 145(11).

Alsakini, W (2012) Two models for managing the virtualisation of construction management firms in the context of Finnish construction markets, Published PhD Thesis, Department of Civil and Structural Engineering, Aalto University.

Alsamadani, R, Hallowell, M and Javernick-Will, A N (2013) Measuring and modelling safety communication in small work crews in the US using social network analysis. Construction Management and Economics, 31(06), 568-79.

Alsamadani, R, Hallowell, M R, Javernick-Will, A and Cabello, J (2013) Relationships among Language Proficiency, Communication Patterns, and Safety Performance in Small Work Crews in the United States. Journal of Construction Engineering and Management, 139(09), 1125–34.

Alsdorf, M, Koch, C and Sander, D (2006) Coaching at the building site: a feasibility study. In: Boyd, D (Ed.), Proceedings 22nd Annual ARCOM Conference, 4-6 September 2006 Birmingham, UK. Association of Researchers in Construction Management, Vol. 1, 249–59.

Alsedairy, F and Smith, S D (2016) Understanding the Drivers and Needs for Mega Infrastructure Project Development in Saudi Arabia. In: Chan, P W and Neilson, C J (Eds.), Proceedings 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester UK. Association of Researchers in Construction Management, 793–802.

Alsedairy, F S (2019) Dynamics of mega infrastructure decision-making in Saudi Arabia, Unpublished PhD Thesis, School of Engineering, University of Edinburgh.

AlSehaimi, A O, Fazenda, P T and Koskela, L (2014) Improving construction management practice with the Last Planner System: a case study. Engineering, Construction and Architectural Management, 21(01), 51-64.

AlShamisi, H A, Chinyio, E, Ankrah, N, Kpamma, Z E, Mushatat, S, Oloke, D and Wilson, P (2019) Prevalence of leadership and management features amongst construction project managers in the UAE. African Journal of Built Environment Research, 3(1), 41-55.

Alsharqawi, M, Abu Dabous, S, Zayed, T and Hamdan, S (2021) Budget Optimization of Concrete Bridge Decks under Performance-Based Contract Settings. Journal of Construction Engineering and Management, 147(06).

Alsharqawi, M, Zayed, T and Shami, A (2020) Ground penetrating radar-based deterioration assessment of RC bridge decks. Construction Innovation , 20(01), 1–17.

Alshawi, M and Faraj, I (2002) Integrated construction environments: technology and implementation. Construction Innovation, 2(01), 33–51.

Alshawi, M and Hassan, Z (1999) Integrated models for construction planning: object flow and relationship. Engineering, Construction and Architectural Management, 6(02), 197–212.

Alshehri, A (2012) Conflict in architectural projects: diagnosis and avoidance, a study based on Saudi Arabian construction industry, Unpublished PhD Thesis, Department of Mechanical, Aerospace & Civil Engineering, University of Manchester.

Alshihre, F (2018) Development of a framework for client satisfaction in the Saudi construction industry, Unpublished PhD Thesis, Faculty of Science and Engineering, University of Wolverhampton.

Alshihre, F, Chinyio, E, Nzekwe-Excel, C and Daniel, E I (2020) Improving clients’ satisfaction in construction projects: the case of Saudi Arabia. Built Environment Project and Asset Management, 10(05), 709–23.

Alsulaiman, Y, Bowles, G and Ogunlana, S (2014) Evaluating risk management in independent water and power plant projects in Saudi Arabia. In: Raiden, A and Aboagye-Nimo, E (Eds.), Proceedings 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK, Association of Researchers in Construction Management, 1409–17.

Alsulamy, S (2015) Developing a performance measurement framework for municipal construction projects in Saudi Arabia , Unpublished PhD Thesis, School of Engineering and the Built Environment, Edinburgh Napier University.

Alsulamy, S, Wamuziri, S Taylor, M (2012) Evaluation of key metrics for measurement of project performance. In: Smith, S.D (Ed.), Proceedings 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK. Association of Researchers in Construction Management, 1101–10.

Alsuliman, J, Bowles, G and Chen, Z (2012) Current practice of variation order management in the Saudi construction industry. In: Smith, S.D (Ed.), Proceedings 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK. Association of Researchers in Construction Management, 1003–12.

Altayeb, S (1992) Efficacy of Drug Testing Programs Implemented by Contractors. Journal of Construction Engineering and Management, 118(04), 780–90.

Altomonte, S (2005) CH2 - Lighting and physiology. Australian Journal of Construction Economics and Building, 5(02), 40-46.

Altomonte, S, Schiavon, S, Kent, M G and Brager, G (2019) Indoor environmental quality and occupant satisfaction in green-certified buildings. Building Research & Information, 47(03), 255–74.

Altoryman, A (2014) Identification and assessment of risk factors affecting construction projects in the Gulf region: Kuwait and Bahrain, Unpublished PhD Thesis, Department of Mechanical, Aerospace & Civil Engineering, University of Manchester.

Altuwaim, A and El-Rayes, K (2021) Multiobjective Optimization Model for Planning Repetitive Construction Projects. Journal of Construction Engineering and Management, 147(07).

Altuwaim, A and El-Rayes, K (2018) Optimizing the Scheduling of Repetitive Construction to Minimize Interruption Cost. Journal of Construction Engineering and Management, 144(07).

Aluko, R O, Daniel, E I, Shamsideen Oshodi, O, Aigbavboa, C O and Abisuga, A O (2018) Towards reliable prediction of academic performance of architecture students using data mining techniques. Journal of Engineering, Design and Technology, 16(03), 385–97.

Aluko, R, O, Adenuga, O, A, Kukoyi, P, O, Soyingbe, A, A and Oyedeji, J, O (2016) Predicting the academic success of architecture students by pre-enrolment requirement: using machine-learning techniques . Construction Economics and Building, 16(04), 86-98.

Alutaibi, A (2018) The impact of facility management practices on tenant satisfaction forresidential complexes in the Kingdom of Saudi Arabiaresidential complexes in the Kingdom of Saudi Arabia, Unpublished PhD Thesis, School of Architecture, Building and Civil Engineering, Loughborough University.

Alvanchi, A and JavadiAghdam, S (2019) Job site weather index: an indicator for open environment construction projects. Construction Innovation , 19(01), 110–24.

Alvanchi, A, Lee, S and AbouRizk, S (2012) Dynamics of Working Hours in Construction. Journal of Construction Engineering and Management, 138(01), 66–77.

Alves Tenório de Morais, G and Casado Lordsleem Júnior, A (2019) Building maintenance management activities in a public institution. Engineering, Construction and Architectural Management, 26(01), 85–103.

Alves, N M F and Bártolo, P J S (2002) Reversing design through computer vision. In: Greenwood, D (Ed.), Proceedings 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK. Association of Researchers in Construction Management, Vol. 2, 503–10.

Alves, S and English, J (2018) Female students’ preparedness for a male-dominated workplace. Journal of Engineering, Design and Technology, 16(04), 581–95.

Alves, T d C L, Milberg, C and Walsh, K D (2012) Exploring lean construction practice, research, and education. Engineering, Construction and Architectural Management, 19(05), 512-25.

Alves, T d C L, Neuman, Y, Walsh, K D, Needy, K L and AlMaian, R (2020) Highly effective companies in supplier quality surveillance practices: a quantitative analysis. Construction Management and Economics, 38(03), 239–58.

Alvez, S and English, J (2017) South African Female Construction Students’ Perceptions Of Gender And Sexism And Preparation By Their University . In: Chan, P W and Neilson, C J (Eds.), Proceedings 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK. Association of Researchers in Construction Management, 219–227.

Alwan, Z and Gledson, B J (2015) Towards green building performance evaluation using asset information modelling. Built Environment Project and Asset Management, 5(03), 290-303.

Alwan, Z, Greenwood, D and Gledson, B (2015) Rapid LEED evaluation performed with BIM-based sustainability analysis on a virtual construction project. Construction Innovation, 15(02), 134-50.

Alwasel, A, Abdel-Rahman, E M, Haas, C T and Lee, S (2017) Experience, Productivity, and Musculoskeletal Injury among Masonry Workers. Journal of Construction Engineering and Management, 143(06).

Alyousif, A, Naoum, S, Atkinson, A and Robinson, H (2010) National culture influence on management practices in the construction industry of United Arab Emirates. In: Egbu, C (Ed.), Proceedings 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK. Association of Researchers in Construction Management, Vol. 1, 511–20.

Alzaed, A and Boussabaine, A H (2012) A conceptual model for user-centred passive building design . In: Smith, S.D (Ed.), Proceedings 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK. Association of Researchers in Construction Management, 1467–77.

Alzubaidi, H J (1993) Maintenance modelling of a major hospital complex, Unpublished PhD Thesis, Department of Mathematics and Computer Science, University of Salford.

Amadi, A and Higham, A (2016) Geotechnical Characterization of Cost Overrun Drivers in Highway Projects: Predicated on Heterogeneous Ground Conditions in the Niger Delta Region of Nigeria. In: Chan, P W and Neilson, C J (Eds.), Proceedings 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester UK. Association of Researchers in Construction Management, 311–320.

Amadi, A and Higham, A P (2019) A cost trajectory to environmentally adaptive building construction in wet humid settings. International Journal of Building Pathology and Adaptation, 38(01), 68–88.

Amadi, A I and Higham, A (2017) Latent geotechnical pathogens inducing cost overruns in highway projects. Journal of Financial Management of Property and Construction, 22(03), 269-85.

Amadi, A I and Higham, A (2019) Putting context to numbers: a geotechnical risk trajectory to cost overrun extremism. Construction Management and Economics, 37(04), 217–37.

Amadi, A I and Higham, A (2018) The trickle-down effect of psycho-social constructs and knowledge deficiencies as organizational barriers to cost performance on highway projects. Journal of Financial Management of Property and Construction, 23(01), 57–72.

Amadi, C, Carrillo, P and Tuuli, M (2019) PPP projects: improvements in stakeholder management. Engineering, Construction and Architectural Management, 27(02), 544–60.

Amadi, C, Carrillo, P and Tuuli, M (2018) Stakeholder management in PPP projects: external stakeholders’ perspective. Built Environment Project and Asset Management, 8(04), 403–14.

Amadi, C, Carrillo, P and Tuuli, M (2014) Stakeholder management in public private partnership projects in Nigeria: Towards a research agenda. In: Raiden, A and Aboagye-Nimo, E (Eds.), Proceedings 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK, Association of Researchers in Construction Management, 423–32.

Amaka-Otchere, A B K (2016) Energy access and rural development in Ghana: prospects for decentralised energy and appropriate technology options. African Journal of Built Environment Research, 1(1), 29-58.

Amakali, T R, Cook, G and Larsen, G D (2012) Striving for inclusive design in the built environment: Learning strategy adopted by policy implementers at Local Authorities in England . In: Smith, S.D (Ed.), Proceedings 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK. Association of Researchers in Construction Management, 285–94.

Amany, A, Taghizade, K and Noorzai, E (2020) Investigating conflicts of expert contractors using the last planner system in building information modeling process. Journal of Engineering, Design and Technology , 18(06), 1381–402.

Amaratunga, C A (2014) Building community disaster resilience through a virtual community of practice (VCOP). International Journal of Disaster Resilience in the Built Environment, 5(01), 66-78.

Amaratunga, D and Senaratne, S (2009) Principles of integrating research into teaching in higher education: Built environment perspective. International Journal of Construction Education and Research, 5(03), 220–32.

Amaratunga, D, Malalgoda, C I and Keraminiyage, K (2018) Contextualising mainstreaming of disaster resilience concepts in the construction process. International Journal of Disaster Resilience in the Built Environment, 9(04–05), 348–67.

Ambrose, M D and Tucker, S N (2000) Procurement system evaluation for the construction industry. Journal of Construction Procurement, 6(02).

Ameen, J R M, Neale, R H and Abrahamson, M (2003) An application of regression analysis to quality a claim for increased costs. Construction Management and Economics, 21(02), 156-65.

Ameh, J and Odusami, K (2010) Nigerian building professionals’ ethical ideology and perceived ethical judgement. Australasian Journal of Construction Economics and Building, 10(03), 1-13.

Ameh, O J and Daniel, E I (2017) Human resource management in the Nigerian construction firms: practices and challenges. Journal of Construction Business and Management, 1(2), 47-54.

Ameh, O J and Odusami, K T (2014) Nigerian construction professional's education and deficiencies in the area of project management. Journal of Construction in Developing Countries, 19(1), 1-14.

Ameh, O J, Soyingbe, A A and Odusami, K T (2010) Significant factors causing cost overruns in telecommunication projects in Nigeria. Journal of Construction in Developing Countries, 15(2), 49-67.

Amer, F, Koh, H Y and Golparvar-Fard, M (2021) Automated Methods and Systems for Construction Planning and Scheduling: Critical Review of Three Decades of Research. Journal of Construction Engineering and Management, 147(07).

Ameyaw, C, Adjei-Kumi, T and Owusu-Manu, D-G (2015) Exploring value for money (VfM) assessment methods of public-private partnership projects in Ghana: A theoretical framework. Journal of Financial Management of Property and Construction, 20(03), 268-85.

Ameyaw, E E and Chan, A P C (2015) Risk allocation in public-private partnership water supply projects in Ghana. Construction Management and Economics, 33(03), 187-208.

Amida, A, Chang, I and Yearwood, D (2019) Designing a practical lab-based assessment: a case study. Journal of Engineering, Design and Technology , 18(03), 567–81.

Amin, K F and Abanda, F H (2019) Building information modelling plan of work for managing construction projects in egypt. Journal of Construction in Developing Countries, 24(2), 23-61.

Aminbakhsh, A and Sonmez, R (2015) Pareto oriented optimization of discrete time-cost trade-off problem using particle swarm optimization. In: Raiden, A and Aboagye-Nimo, E (Eds.), Proceedings 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK. Association of Researchers in Construction Management, 33–40.

Amini, M, Mahdavinejad, M and Bemanian, M (2019) Future of interactive architecture in developing countries: Challenges and opportunities in case of tehran. Journal of Construction in Developing Countries, 24(1), 163-84.

Aminian, E (2014) A study of inter-firm opportunism in the construction industry, Unpublished PhD Thesis, Department of Mechanical, Aerospace & Civil Engineering, University of Manchester.

Aminian, E, Kirkham, R and Fenn, P (2011) Contracting strategies in construction industries. In: Egbu, C and Lou, E C W (Eds.), Proceedings 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK. Association of Researchers in Construction Management, 755–64.

Aminian, S, Hinckson, E A and Stewart, T (2015) Modifying the classroom environment to increase standing and reduce sitting. Building Research & Information, 43(05), 631-45.

Amir, T (1986) Transient Response Analysis of a Dual Cycle System. Journal of Construction Engineering and Management, 112(03), 403–10.

Amiril, A (2014) The importance and implementation of sustainability factors in Malaysian railway projects. In: Raiden, A and Aboagye-Nimo, E (Eds.), Proceedings 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK, Association of Researchers in Construction Management, 73–82.

Amirkhanian, S N and Baker, N J (1992) Expert System for Equipment Selection for Earth‐Moving Operations. Journal of Construction Engineering and Management, 118(02), 318–31.

Amirkhanian, S N, Burati, J L and Mirchandani, H C (1994) Effect of Testing Variability on Contractor Payment for Asphalt Pavements. Journal of Construction Engineering and Management, 120(03), 579–92.

Ammar, A, Hanna, A S, Nordheim, E V and Russell, J S (2003) Indicator Variables Model of Firm’s Size-Profitability Relationship of Electrical Contractors Using Financial and Economic Data. Journal of Construction Engineering and Management, 129(02), 192–7.

Ammar, M A (2003) Float analysis of non-serial repetitive activities. Construction Management and Economics, 21(05), 535-42.

Ammar, M A (2013) LOB and CPM Integrated Method for Scheduling Repetitive Projects. Journal of Construction Engineering and Management, 139(01), 44–50.

Ammar, M A (2011) Optimization of Project Time-Cost Trade-Off Problem with Discounted Cash Flows. Journal of Construction Engineering and Management, 137(01), 65–71.

Ammar, M A (2020) Resource optimisation in line of balance scheduling. Construction Management and Economics, 38(08), 715–25.

Ammar, M A and Mohieldin, Y A (2002) Resource constrained project scheduling using simulation. Construction Management and Economics, 20(04), 323-30.

Ammar, M, Zayed, T and Moselhi, O (2013) Fuzzy-Based Life-Cycle Cost Model for Decision Making under Subjectivity. Journal of Construction Engineering and Management, 139(05), 556–63.

Amoah, C and Pretorius, L (2019) Evaluation of the impact of risk management on project performance in small construction firms in South Africa. Journal of Engineering, Design and Technology , 18(03), 611–34.

Amoatey, C and Hayibor, M V K (2017) Critical success factors for local government project stakeholder management. Built Environment Project and Asset Management, 7(02), 143-56.

Amorocho, J A P and Hartmann, T (2020) Decision-Making Process to Select Energy-Efficient Renovation Alternatives for Residential Buildings: Two Case Studies. In: Scott, L and Neilson, C J (Eds.), Proceedings 36th Annual ARCOM Conference, 7-8 September 2020, UK, Association of Researchers in Construction Management, 635-644.

Amos, D, Au-Yong, C P and Musa, Z N (2020) Developing key performance indicators for hospital facilities management services: a developing country perspective. Engineering, Construction and Architectural Management, 27(09), 2715–35.

Amos, D, Musa, Z N and Au-Yong, C P (2020) Performance measurement of facilities management services in Ghana’s public hospitals. Building Research & Information, 48(02), 218–38.

Amuda-Yusuf, G (2018) Critical Success Factors for Building Information Modelling Implementation . Construction Economics and Building, 18(03), 55-73.

Amuda-Yusuf, G and Mohamed, S F (2015) Essential features of a building services standard method of measurement in Malaysia. Engineering, Construction and Architectural Management, 22(06), 749-70.

An, T and Watanabe, T (2011) Towards the sustainable improvement in construction labour's employment in China: Cultivating subcontractor's role. In: Egbu, C and Lou, E C W (Eds.), Proceedings 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK. Association of Researchers in Construction Management, 663–72.

An, X, Li, H, Zuo, J, Ojuri, O, Wang, Z and Ding, J (2018) Identification and Prevention of Unbalanced Bids Using the Unascertained Model. Journal of Construction Engineering and Management, 144(11).

Anagnostopoulos, K P and Koulinas, G K (2010) A simulated annealing hyperheuristic for construction resource levelling. Construction Management and Economics, 28(02), 75.

Anaman, K A and Osei-Amponsah, C (2007) Analysis of the causality links between the growth of the construction industry and the growth of the macro-economy in Ghana. Construction Management and Economics, 25(09), 951–61.

Anand, K B and Ramamurthy, K (2003) Laboratory-Based Productivity Study on Alternative Masonry Systems. Journal of Construction Engineering and Management, 129(03), 237–42.

Anastasopoulos, P C, Haddock, J E and Peeta, S (2014) Cost Overrun in Public-Private Partnerships: Toward Sustainable Highway Maintenance and Rehabilitation. Journal of Construction Engineering and Management, 140(06).

Anastasopoulos, P C, Labi, S, Bhargava, A and Mannering, F L (2012) Empirical Assessment of the Likelihood and Duration of Highway Project Time Delays. Journal of Construction Engineering and Management, 138(03), 390–8.

Anastasopoulos, P C, Labi, S, Bhargava, A, Bordat, C and Mannering, F L (2010) Frequency of Change Orders in Highway Construction Using Alternate Count-Data Modeling Methods. Journal of Construction Engineering and Management, 136(08), 886–93.

Ancell D (2013) Construction studies in higher education and the use of digital technology. In: Smith, S D and Ahiaga-Dagbui, D D (Eds.), Proceedings 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK, Association of Researchers in Construction Management, 225–235.

Ancell, D (2005) Reducing costs: a practical application of performance-based specification and transaction cost theories. In: Khosrowshahi, F (Ed.), Proceedings 21st Annual ARCOM Conference, 7-9 September 2005, London, UK. Association of Researchers in Construction Management, Vol. 2, 721–9.

Andalib, R, Hoseini, A and Gatmiri, B (2018) A stochastic model of cash flow forecasting considering delays in owners’ payments. Construction Management and Economics, 36(10), 545–64.

Andary, E G, Abi Shdid, C, Chowdhury, A and Ahmad, I (2019) Integrated project delivery implementation framework for water and wastewater treatment plant projects. Engineering, Construction and Architectural Management, 27(03), 609–33.

Anderies, J M (2014) Embedding built environments in social–ecological systems: resilience-based design principles. Building Research & Information, 42(02), 130-42.

Andersen, C E, Kanafani, K, Zimmermann, R K, Rasmussen, F N and Birgisdóttir, H (2020) Comparison of GHG emissions from circular and conventional building components. Buildings and Cities, 1(01), 379–92.

Andersen, L P S and Grytnes, R (2021) Different ways of perceiving risk and safety on construction sites and implications for safety cooperation. Construction Management and Economics, 39(05), 419–31.

Andersen, L P, Karlsen, I L, Kines, P, Joensson, T and Nielsen, K J (2015) Social identity in the construction industry: implications for safety perception and behaviour. Construction Management and Economics, 33(08), 640-52.

Andersen, L P, Nørdam, L, Joensson, T, Kines, P and Nielsen, K J (2018) Social identity, safety climate and self-reported accidents among construction workers. Construction Management and Economics, 36(01), 22-31.

Andersen, M (2002) Light distribution through advanced fenestration systems. Building Research & Information, 30(04), 264–81.

Andersen, M T and Findsen, A (2019) Exploring the benefits of structured information with the use of virtual design and construction principles in a BIM life-cycle approach. Architectural Engineering and Design Management, 15(02), 83–100.

Andersen, M, Kleindienst, S, Yi, L, Lee, J, Bodart, M and Cutler, B (2008) An intuitive daylighting performance analysis and optimization approach. Building Research & Information, 36(06), 593–607.

Andersen, T and Gaarslev, T (1996) Perspectives on artificial intelligence in the construction industry. Engineering, Construction and Architectural Management, 3(01), 3–14.

Anderson, A, Dossick, C S and Osburn, L (2020) Curriculum to Prepare AEC Students for BIM-Enabled Globally Distributed Projects. International Journal of Construction Education and Research, 16(04), 270–89.

Anderson, J and Moncaster, A (2020) Embodied carbon of concrete in buildings, Part 1: analysis of published EPD. Buildings and Cities, 1(01), 198–217.

Anderson, S D, Fisher, D J and Rahman, S P (2000) Integrating Constructability into Project Development: A Process Approach. Journal of Construction Engineering and Management, 126(02), 81–88.

Anderson, S D, Patil, S S, Gibson, G E and Sullivan, G R (2004) Owner–Contractor Work Structures: Process Approach. Journal of Construction Engineering and Management, 130(05), 680–90.

Anderson, S, Shane, J S and Schexnayder, C (2011) Strategies for Planned Project Acceleration. Journal of Construction Engineering and Management, 137(05), 372–81.

Andersson, R and Buser, M (2020) On the Road to Nowhere? The Challenges of Aligning Construction and Demolition Waste Practices with Circular Economy. In: Scott, L and Neilson, C J (Eds.), Proceedings 36th Annual ARCOM Conference, 7-8 September 2020, UK, Association of Researchers in Construction Management, 536-545.

Andersson, R, Buser, M and Bosch, P (2019) Improving Renovation Waste Management in Sweden: The Role of the Demolition Company. In: Gorse, C and Neilson, C J (Eds.), Proceedings 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK Association of Researchers in Construction Management, 84-93.

Andi (2006) The importance and allocation of risks in Indonesian construction projects. Construction Management and Economics, 24(01), 69-80.

Andi and Minato, T (2003) Representing casual mechanism of defective designs: a system approach considering human errors. Construction Management and Economics, 21(03), 297-305.

Andi and Minato, T (2004) Representing causal mechanism of defective designs: exploration through case studies. Construction Management and Economics, 22(02), 183-92.

Andrawus, J, Watson, J and Kishk, M (2007) Maintenance optimisation of wind turbines: lessons for the built environment. In: Boyd, D (Ed.), Proceedings 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK. Association of Researchers in Construction Management, Vol. 2, 893–902.

Andreas, B (2019) A framework for understanding the policy process for construction, Unpublished PhD Thesis, School of Architecture, Building and Civil Engineering , Loughborough University.

Andreu, I C and Oreszczyn, T (2004) Architects need environmental feedback. Building Research & Information, 32(04), 313–28.

Andrew, A and Bryan, C (2011) Scottish construction lawyers and mediation: an investigation into attitudes and experiences. International Journal of Law in the Built Environment, 3(02), 159–81.

Andrew, A, Murning, I, Pitt, M and Tucker, M (2008) Investment in the Scottish further education estate 1999-2006. Journal of Financial Management of Property and Construction, 13(03), 209–16.

Andrew, M (2011) Contract interpretation: potential for relaxing the exclusionary rule. International Journal of Law in the Built Environment, 3(03), 205–21.

Andrić, J M, Wang, J, Zou, P X W, Zhang, J and Zhong, R (2019) Fuzzy Logic–Based Method for Risk Assessment of Belt and Road Infrastructure Projects. Journal of Construction Engineering and Management, 145(12).

Ang, G, Groosman, M and Scholten, N P M (2005) Dutch performance-based approach to building regulations and public procurement. Building Research & Information, 33(02), 107–19.

Angelides, D and Xenidis, Y (2005) A methodology for the development of a european approach concerning performance and risks of built systems. In: Khosrowshahi, F (Ed.), Proceedings 21st Annual ARCOM Conference, 7-9 September 2005, London, UK. Association of Researchers in Construction Management, Vol. 2, 949–58.

Anh Tuan, B L, Tesfamariam, M G, Chen, Y, Hwang, C, Lin, K and Young, M (2014) Production of Lightweight Aggregate from Sewage Sludge and Reservoir Sediment for High-Flowing Concrete. Journal of Construction Engineering and Management, 140(05).

Aniekwu, A N (1995) The business environment of the construction industry in Nigeria. Construction Management and Economics, 13(06), 445-55.

Aniekwu, A N and Okpala, D C (1988) Contractual arrangement and the performance of the Nigerian construction industry (the structural component). Construction Management and Economics, 6(01), 3-11.

Aniekwu, A N and Okpala, D C (1988) The effect of systemic factors on contract services in Nigeria. Construction Management and Economics, 6(02), 171-82.

Anike, E E, Saidani, M, Ganjian, E, Tyrer, M and Olubanwo, A O (2019) The potency of recycled aggregate in new concrete: a review. Construction Innovation , 19(04), 594–613.

Anikeeff, M A and Sriram, V (2008) Construction management strategy and developer performance. Engineering, Construction and Architectural Management, 15(06), 504–13.

Anisuddin, S and Khaleeq, S (2005) Deterioration and rehabilitation of concrete structures in hot and arid regions. In: Khosrowshahi, F (Ed.), Proceedings 21st Annual ARCOM Conference, 7-9 September 2005, London, UK. Association of Researchers in Construction Management, Vol. 1, 441–51.

Anjaneyappa, V, Amarnath, M S and Srinivasamurthy, B R (2014) Compacting Characteristics of Light Compacting Equipment. Journal of Construction Engineering and Management, 140(05).

Ankomah, E N, Ayarkwa, J and Agyekum, K (2020) Status of lean construction implementation among small and medium building contractors (SMBCs) in Ghana. Journal of Engineering, Design and Technology , 18(06), 1691–709.

Ankrah, N A and Langford, D A (2005) Architects and contractors: a comparative study of organizational cultures. Construction Management and Economics, 23(06), 595-607.

Ankrah, N A and Proverbs, D (2005) A framework for measuring construction project performance: overcoming key challenges of performance measurement. In: Khosrowshahi, F (Ed.), Proceedings 21st Annual ARCOM Conference, 7-9 September 2005, London, UK. Association of Researchers in Construction Management, Vol. 2, 959–69.

Ankrah, N A and Proverbs, D (2004) Treading the softer areas of construction management: a critical review of culture. In: Khosrowshahi, F (Ed.), Proceedings 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK. Association of Researchers in Construction Management, Vol. 1, 551–8.

Ankrah, N A, Proverbs, D and Debrah, Y (2007) A cultural profile of construction project organisations in the UK. In: Boyd, D (Ed.), Proceedings 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK. Association of Researchers in Construction Management, Vol. 1, 169–79.

Ankrah, N A, Proverbs, D and Debrah, Y (2009) Factors influencing the culture of a construction project organisation: an empirical investigation. Engineering, Construction and Architectural Management, 16(01), 26–47.

Ankrah, N A, Proverbs, D G and Ahadzie, D K (2008) Exploring the behaviours of construction project participants through social cognitive theory. In: Dainty, A (Ed.), Proceedings 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK. Association of Researchers in Construction Management, Vol. 1, 443–53.

Annamalai, T R and Hari, S (2016) Innovative financial intermediation and long term capital pools for infrastructure: A case study of infrastructure debt funds. Journal of Financial Management of Property and Construction, 21(03), 231-52.

Annamalai, T R and Jain, N (2013) Project finance and investments in risky environments: evidence from the infrastructure sector. Journal of Financial Management of Property and Construction, 18(03), 251-67.

Annemans, M and Heylighen, A (2021) Productive interactions to exchange knowledge in healthcare building design. Building Research & Information, 49(03), 281–93.

Anosike, N M, Enenmoh, C R, Nkeleme, E and Mosaku, T O (2016) Comparative analysis of contributions of building and quantity surveying professions towards the development of sustainable construction industry in Nigeria. African Journal of Built Environment Research, 1(1), 1-14.

Ansah, R H and Sorooshian, S (2018) 4P delays in project management. Engineering, Construction and Architectural Management, 25(01), 62-76.

Ansari, R (2019) Dynamic Simulation Model for Project Change-Management Policies: Engineering Project Case. Journal of Construction Engineering and Management, 145(07).

Ansell, M (2009) A study of a collaborative framework arrangement for highways renewals schemes, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Ansell, M, Evans, R, Holmes, M, Price, A and Pasquire, C (2009) An application of the construction management framework in highways major maintenance. Engineering, Construction and Architectural Management, 16(02), 162–74.

Ansell, M, Holmes, M, Evans, R, Pasquire, C and Price, A (2009) Delivering Best Value in Highways Major Maintenance Schemes: Case Study. Journal of Construction Engineering and Management, 135(04), 235–45.

Anson, M and Siu, M F (2020) Augmented Balance Point Diagrams for Matching Site and Concrete-Supply Resources. Journal of Construction Engineering and Management, 146(04).

Anson, M and Wang, S Q (1998) Performance of Concrete Placing in Hong Kong Buildings. Journal of Construction Engineering and Management, 124(02), 116–24.

Anson, M, Tang, S L and Ying, K C (2002) Measurement of the performance of ready mixed concreting resources as data for system simulation. Construction Management and Economics, 20(03), 237-50.

Anson, M, Ying, K T and Siu, M F (2019) Analytical models towards explaining the difficulty in efficiently matching site concrete supply resources with placing crew needs. Engineering, Construction and Architectural Management, 26(08), 1672–95.

Antillon, E I, Molenaar, K R and Javernick-Will, A (2017) Evaluating the Effect of Contract Timing on Lifecycle-Design Innovation in Public–Private Partnerships: Comparative Case Study of Highway Projects. Journal of Construction Engineering and Management, 143(04).

Antoni, A, Yonathan, A, Suryo, H E, Felio, C, Ghozali, K E and Hardjito, D (2021) Exploring the Potential of Low Cement Concrete through a Student Concrete Competition. International Journal of Construction Education and Research, 17(01), 37–51.

Antoniadis, D (2009) Managing complexity in project teams, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Antoniadis, D N, Edum-Fotwe, F T and Thorpe, A (2006) Project reporting and complexity. In: Boyd, D (Ed.), Proceedings 22nd Annual ARCOM Conference, 4-6 September 2006 Birmingham, UK. Association of Researchers in Construction Management, Vol. 1, 123–33.

Antoniadis, D N, Edum-Fotwe, F T, Thorpe, A and McCaffer, R (2009) Complexity effect of project team member selection practices in construction. In: Dainty, A R J (Ed.), Proceedings 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK. Association of Researchers in Construction Management, Vol. 2, 837–46.

Antunes, R, González, V A, Walsh, K, Rojas, O, O’Sullivan, M and Odeh, I (2018) Benchmarking Project-Driven Production in Construction Using Productivity Function: Capacity and Cycle Time. Journal of Construction Engineering and Management, 144(03).

Antwi-Afari, M F, Li, H, Edwards, D J, Pärn, E A, Owusu-Manu, D, Seo, J and Wong, A Y L (2018) Identification of potential biomechanical risk factors for low back disorders during repetitive rebar lifting. Construction Innovation, 18(02), 0.

Antwi-Afari, M F, Li, H, Edwards, D J, Pärn, E A, Seo, J and Wong, A (2017) Effects of different weights and lifting postures on balance control following repetitive lifting tasks in construction workers. International Journal of Building Pathology and Adaptation, 35(03), 247–63.

Antwi-Afari, M F, Li, H, Umer, W, Yu, Y and Xing, X (2020) Construction Activity Recognition and Ergonomic Risk Assessment Using a Wearable Insole Pressure System. Journal of Construction Engineering and Management, 146(07).

Antwi-Afari, M F, Li, H, Wong, J K, Oladinrin, O T, Ge, J X, Seo, J and Wong, A Y L (2019) Sensing and warning-based technology applications to improve occupational health and safety in the construction industry. Engineering, Construction and Architectural Management, 26(08), 1534–52.

Antwi, A and Deakin, M (1996) Discounting, obsolescence, depreciation and their effects on the environment of cities. Journal of Financial Management of Property and Construction, 1(02), 39–56.

Anugwo, I C, Shakantu, W, Saidu, I and Adamu, A (2018) Potentiality of the South African construction SMME contractors globalising within and beyond the SADC construction markets. Journal of Construction Business and Management, 2(1), 41-9.

Anumba, C (2006) Application of GIS to labour market planning in construction, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Anumba, C E H, Dainty, A, Ison, S and Sergeant, A (2006) Understanding structural and cultural impediments to ICT system integration: A GIS-based case study. Engineering, Construction and Architectural Management, 13(06), 616–33.

Anumba, C J (1996) Issues in the investigation and reporting of housing subsidence. Building Research & Information, 24(03), 170–5.

Anumba, C J (2009) Towards next-generation knowledge management systems for construction sector organisations. Construction Innovation, 9(03), 245–9.

Anumba, C J and Evbuomwam, N F O (1997) Concurrent engineering in design-build projects. Construction Management and Economics, 15(03), 271-81.

Anumba, C J, Abdullah, A and Ruikar, K (2008) An integrated system for demolition techniques selection. Architectural Engineering and Design Management, 4(02), 130–48.

Anumba, C J, Issa, R R A, Pan, J and Mutis, I (2008) Ontology-based information and knowledge management in construction. Construction Innovation, 8(03), 218–39.

Anumba, C J, Pan, J, Issa, R R A and Mutis, I (2008) Collaborative project information management in a semantic web environment. Engineering, Construction and Architectural Management, 15(01), 78–94.

Anumba, C, Dainty, A R J, Ison, S G and Sergeant, A (2005) The application of GIS to construction labour market planning. Construction Innovation, 5(04), 219–30.

Anvuur, A M and Kumaraswamy, M K (2010) Promises, pitfalls and shortfalls of the guaranteed maximum price approach: a comparative case study. In: Egbu, C (Ed.), Proceedings 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK. Association of Researchers in Construction Management, Vol. 2, 1079–88.

Anvuur, A M and Kumaraswamy, M M (2007) Conceptual Model of Partnering and Alliancing. Journal of Construction Engineering and Management, 133(03), 225–34.

Anvuur, A M and Kumaraswamy, M M (2016) Effects of Teamwork Climate on Cooperation in Crossfunctional Temporary Multi-Organization Workgroups. Journal of Construction Engineering and Management, 142(01).

Anvuur, A M and Kumaraswamy, M M (2012) Measurement and Antecedents of Cooperation in Construction. Journal of Construction Engineering and Management, 138(07), 797–810.

Anvuur, A M, Kumaraswamy, M and Fellows, R (2012) Perceptions of status and TMO workgroup cooperation: implications for project governance. Construction Management and Economics, 30(09), 719-37.

Anwer, S, Li, H, Antwi-Afari, M F, Umer, W and Wong, A Y L (2021) Evaluation of Physiological Metrics as Real-Time Measurement of Physical Fatigue in Construction Workers: State-of-the-Art Review. Journal of Construction Engineering and Management, 147(05).

Aoieong, R T, Tang, S L and Ahmed, S M (2002) A process approach in measuring quality costs of construction projects: model development. Construction Management and Economics, 20(02), 179-92.

Aouad, G F (1991) Integrated planning systems for the construction industry, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Aouad, G F and Barrett, P S (1998) The feasibility of using hybrid concrete structures within the context of cost and time. In: Hughes, W (Ed.), Proceedings 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK. Association of Researchers in Construction Management, Vol. 1, 155–64.

Aouad, G F and Price, A D F (1994) Construction planning and information technology in the UK and USA construction industries: a comparative study. Construction Management and Economics, 12(02), 97-106.

Aouad, G F, Bakis, N, Amaratunga, D, Osbaldiston, S, Sun, M, Kishk, M, Al-Hajj, A and Pollock, R (2001) An integrated life cycle costing database: a conceptual framework. In: Akintoye, A (Ed.), Proceedings 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK. Association of Researchers in Construction Management, Vol. 1, 421–31.

Aouad, G F, Child, T, Brandon, P S and Sarshar, M (1998) Linking construction information through VR using an object oriented environment. In: Hughes, W (Ed.), Proceedings 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK. Association of Researchers in Construction Management, Vol. 1, 268–77.

Aouad, G F, Ford, S R, Kirkham, J A, Brandon, P S, Brown, F E, Child, T, Cooper, G S, Oxman, R E and Young, B A (1994) Knowledge elicitation using protocol analysis in a workshop environment. Construction Management and Economics, 12(03), 271-8.

Aouad, G F, Hinks, J, Cooper, R, Sheath, D M, Kagioglou, M and Sexton, M (1998) An information technology (IT) map for a generic design and construction process protocol. Journal of Construction Procurement, 4(02), 132–51.

Aouad, G F, Kawooya, A A O and Price, A D F (1996) Construction planning models: a review of history, capabilities and limitations. Journal of Construction Procurement, 2(02), 19–37.

Aouad, G F, Kirkham, J A, Brandon, P S, Brown, F E, Cooper, G S, Ford, S R, Oxman, R E, Sarshar, M and Young, B A (1993) Information modelling in the construction industry: the information engineering approach. Construction Management and Economics, 11(05), 384-97.

Aouad, G, Lee, A and Wu, S (2005) nD modelling for collaborative working in construction. Architectural Engineering and Design Management, 1(01), 33-44.

Aouad, G, Sun, M and Faraj, I (2002) Automatic generation of data representations for construction applications. Construction Innovation, 2(03), 151–65.

Aouad, R and Amara, I (2018) Influence of the cutting condition on the wear and the surface roughness in the steel AISI 4140 with mixed ceramic and diamond tool. Journal of Engineering, Design and Technology, 16(06), 828–36.

Apa, R and Sedita, S R (2017) How (do) internal capabilities and the geography of business networks shape the performance of contractors in public procurement tenders? Evidence from the construction industry. Construction Management and Economics, 35(07), 404-16.

Apipattanavis, S, Sabol, K, Molenaar, K R, Rajagopalan, B, Xi, Y, Blackard, B and Patil, S (2010) Integrated Framework for Quantifying and Predicting Weather-Related Highway Construction Delays. Journal of Construction Engineering and Management, 136(11), 1160–8.

Appleton, B J A, Niaz, M A, Abourizk, S M, Al-Hussein, M and Mohamed, Y (2006) Priority rating logic simulation model for tower crane operations management. Journal of Construction Research, 7(01), 133–47.

Aquere, A L, Dinis-Carvalho, J and Lima, R M (2013) Project Cell: Cellular Organization of the Building Design Process. Journal of Construction Engineering and Management, 139(05), 538–46.

Araújo, L G and Lucko, G (2016) Slip Chart–Inspired Project Schedule Diagramming: Links, Extension to Network Schedules, and Unification. Journal of Construction Engineering and Management, 142(07).

Arabiat, A (2013) Modelling construction client risk performance using organisation behaviour parameters, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Arabiat, A, Edum-Fotwe, F T and McCaffer, R (2007) Does client behaviour actively induce risk in construction projects?. In: Boyd, D (Ed.), Proceedings 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK. Association of Researchers in Construction Management, Vol. 2, 745–54.

Aragon, V, Gauthier, S, Warren, P, James, P A B and Anderson, B (2019) Developing English domestic occupancy profiles. Building Research & Information, 47(04), 375–93.

Arai, K and Morimoto, E (2014) A comparative analysis of the desired and actual bidding behaviour of construction companies. In: Raiden, A and Aboagye-Nimo, E (Eds.), Proceedings 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK, Association of Researchers in Construction Management, 433–42.

Arai, K and Morimoto, E (2016) Construction Industry and (dis)Economies of Scope. In: Chan, P W and Neilson, C J (Eds.), Proceedings 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester UK. Association of Researchers in Construction Management, 279–287.

Arai, K and Morimoto, E (2020) Renovation of the Japanese Construction Industry: Evaluation of I-Construction from the Perspective of Construction Management. In: Scott, L and Neilson, C J (Eds.), Proceedings 36th Annual ARCOM Conference, 7-8 September 2020, UK, Association of Researchers in Construction Management, 166-175.

Arain, F M (2009) Leveraging on information technology to teach construction law to built environment students: A knowledge-based system approach. Journal of Construction in Developing Countries, 14(2), 77-102.

Arain, F M and Pheng, L S (2005) How design consultants perceive potential causes of variation orders for institutional buildings in Singapore. Architectural Engineering and Design Management, 1(03), 181–96.

Arain, F M and Pheng, L S (2007) Modeling for management of variations in building projects. Engineering, Construction and Architectural Management, 14(05), 420–33.

Arambula, E and Gharaibeh, N (2014) Methods for Accumulating Construction and Material Quality Test Results and Their Effect on Acceptance Decisions. Journal of Construction Engineering and Management, 140(08).

Arana, M M and Wittek, R P M (2016) Community resilience: Sustained cooperation and space usage in collective housing. Building Research & Information, 44(07), 764-74.

Aranda-Mena, G (2003) Mapping workers' cognitive structures of construction site hazards, Unpublished PhD Thesis, School of Construction Management and Engineering, University of Reading.

Aranda-Mena, G and Gameson, R (2012) An alignment model for the research higher degree supervision process using repertory grids - reflections on application in practice in built environment research. Australasian Journal of Construction Economics and Building, 12(03), 66-81.

Aranda-Mena, G, Blismas, N and Wakefield, R (2005) Factors affecting the uptake of e-business by small building enterprises. In: Khosrowshahi, F (Ed.), Proceedings 21st Annual ARCOM Conference, 7-9 September 2005, London, UK. Association of Researchers in Construction Management, Vol. 2, 685–95.

Aranda-Mena, G, Sher, W, Gameson, R and Ward, P (2005) Evolving trends in nD modelling: the 'construction planning workbench'. Architectural Engineering and Design Management, 1(02), 111–26.

Aranda, G and Finch, E (2003) Using repertory grids to measure changes in risk-taking behaviour. Journal of Construction Research, 4(01), 101–14.

Arantes, A and Ferreira, L M D (2020) Underlying causes and mitigation measures of delays in construction projects. Journal of Financial Management of Property and Construction , 25(02), 165–81.

Arashpour, M, Heidarpour, A, Akbar Nezhad, A, Hosseinifard, Z, Chileshe, N and Hosseini, R (2020) Performance-based control of variability and tolerance in off-site manufacture and assembly: optimization of penalty on poor production quality. Construction Management and Economics, 38(06), 502–14.

Arashpour, M, Shabanikia, M and Arashpour, M (2012) Valuing the contribution of knowledge-oriented workers to projects: a merit based approach in the construction industry. Australasian Journal of Construction Economics and Building, 12(04), 1-14.

Arashpour, M, Wakefield, R, Abbasi, B, Arashpour, M and Hosseini, R (2018) Optimal process integration architectures in off-site construction: Theorizing the use of multi-skilled resources. Architectural Engineering and Design Management, 14(01–02), 46–59.

Arashpour, M, Wakefield, R, Blismas, N and Abbasi, B (2016) Quantitative Analysis of Rate-Driven and Due Date–Driven Construction: Production Efficiency, Supervision, and Controllability in Residential Projects. Journal of Construction Engineering and Management, 142(01).

Arashpour, M, Wakefield, R, Blismas, N and Lee E W M (2013) A new approach for modelling variability in residential construction projects. Australasian Journal of Construction Economics and Building, 13(02), 83-92.

Arashpour, M, Wakefield, R, Blismas, N and Lee, E W M (2014) Analysis of Disruptions Caused by Construction Field Rework on Productivity in Residential Projects. Journal of Construction Engineering and Management, 140(02).

Araujo, L G, Piña, A B S, Aidar, L A G, Coelho, G O and Carvalho, M T M (2019) Recommendations and guidelines for implementing PPP projects. Built Environment Project and Asset Management, 9(02), 262–76.

Aravindraj, S and Vinodh, S (2014) Forty criteria based agility assessment using scoring approach in an Indian relays manufacturing organization. Journal of Engineering, Design and Technology, 12(04), 507-18.

Arayici, Y and Aouad, G (2005) Computer integrated construction: an approach to requirements engineering. Engineering, Construction and Architectural Management, 12(02), 194–215.

Arayici, Y and Aouad, G (2004) Industry driven innovative systems development for the construction industry: the DIVERCITY project. In: Khosrowshahi, F (Ed.), Proceedings 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK. Association of Researchers in Construction Management, Vol. 2, 777–84.

Arayici, Y, Aouad, G and Ahmed, V (2005) Requirements engineering for innovative integrated ICT systems for the construction industry. Construction Innovation, 5(03), 179–200.

Arbabi, H, Salehi-Taleshi, M and Ghods, K (2020) The role of project management office in developing knowledge management infrastructure. Engineering, Construction and Architectural Management, 27(10), 3261–87.

Arboleda, C A and Abraham, D M (2006) Evaluation of flexibility in capital investments of infrastructure systems. Engineering, Construction and Architectural Management, 13(03), 254–74.

Arboleda, C A and Abraham, D M (2004) Fatalities in Trenching Operations—Analysis Using Models of Accident Causation. Journal of Construction Engineering and Management, 130(02), 273–80.

Arbon, P, Steenkamp, M, Cornell, V, Cusack, L and Gebbie, K (2016) Measuring disaster resilience in communities and households: Pragmatic tools developed in Australia. International Journal of Disaster Resilience in the Built Environment, 7(02), 201-15.

Arbulu, R J, Tommelein, I D, Walsh, K D and Hershauer, J C (2003) Value stream analysis of a re-engineered construction supply chain. Building Research & Information, 31(02), 161–71.

Arditi, D (1985) Construction Productivity Improvement. Journal of Construction Engineering and Management, 111(01), 1–14.

Arditi, D (1983) Diffusion of Network Planning in Construction. Journal of Construction Engineering and Management, 109(01), 1–12.

Arditi, D (1984) Graduate education in construction management. Construction Management and Economics, 2(03), 193-9.

Arditi, D A (1973) An investigation into the behavioural and technical factors affecting success in the use of network analysis in the construction industry of Great Britain, Unpublished PhD Thesis, Department of Civil Engineering, Loughborough University of Technology.

Arditi, D and Alavipour, S M R (2019) Trends in Expectations about Duties and Responsibilities of Construction Managers. Journal of Construction Engineering and Management, 145(07).

Arditi, D and Albulak, M Z (1986) Line‐of‐Balance Scheduling in Pavement Construction. Journal of Construction Engineering and Management, 112(03), 411–24.

Arditi, D and Balci, G (2009) Managerial Competencies of Female and Male Construction Managers. Journal of Construction Engineering and Management, 135(11), 1275–8.

Arditi, D and Chotibhongs, R (2009) Detection and prevention of unbalanced bids. Construction Management and Economics, 27(08), 721–32.

Arditi, D and Chotibhongs, R (2005) Issues in Subcontracting Practice. Journal of Construction Engineering and Management, 131(08), 866–76.

Arditi, D and Gunaydin, H M (1998) Factors That Affect Process Quality in the Life Cycle of Building Projects. Journal of Construction Engineering and Management, 124(03), 194–203.

Arditi, D and Gutierrez, A E (1991) Factors Affecting U.S. Contractors' Performance Overseas. Journal of Construction Engineering and Management, 117(01), 27–46.

Arditi, D and Gutierrez, A E (1991) Performance of US contractors in foreign markets. Construction Management and Economics, 9(05), 431-49.

Arditi, D and Koseoglu, H (1983) Factors affecting success in network applications in a developing country. Construction Management and Economics, 1(01), 3-16.

Arditi, D and Lee, D-E (2003) Assessing the corporate service quality performance of design build contractors using quality function deployment. Construction Management and Economics, 21(02), 175-85.

Arditi, D and Lee, D-E (2004) Note - Service quality performance of design/build contractors using quality function deployment. Construction Management and Economics, 22(02), 123-7.

Arditi, D and Mochtar, K (1996) Productivity improvement in the Indonesian construction industry. Construction Management and Economics, 14(01), 13-24.

Arditi, D and Mochtar, K (2000) Trends in productivity improvement in the US construction industry. Construction Management and Economics, 18(01), 15-27.

Arditi, D and Ongkasuwan, D (2009) Duties and Responsibilities of Construction Managers: Perceptions of Parties Involved in Construction. Journal of Construction Engineering and Management, 135(12), 1370–4.

Arditi, D and Patel, B K (1989) Impact Analysis of Owner‐Directed Acceleration. Journal of Construction Engineering and Management, 115(01), 144–57.

Arditi, D and Pattanakitchamroon, T (2008) Analysis Methods in Time-Based Claims. Journal of Construction Engineering and Management, 134(04), 242–52.

Arditi, D and Suh, K (1991) Estimating system selection expert. Construction Management and Economics, 9(04), 369-81.

Arditi, D and Yasamis, F (1998) Incentive/Disincentive Contracts: Perceptions of Owners and Contractors. Journal of Construction Engineering and Management, 124(05), 361–73.

Arditi, D, Akan, G T and Gurdamar, S (1985) Reasons for delays in public projects in Turkey. Construction Management and Economics, 3(02), 171-81.

Arditi, D, Ayrancioglu, M and Shi, J J (2005) Worker safety issues in night-time highway construction. Engineering, Construction and Architectural Management, 12(05), 487–501.

Arditi, D, Elhassan, A and Toklu, Y C (2002) Constructability Analysis in the Design Firm. Journal of Construction Engineering and Management, 128(02), 117–26.

Arditi, D, Gluch, P and Holmdahl, M (2013) Managerial competencies of female and male managers in the Swedish construction industry. Construction Management and Economics, 31(09), 979-90.

Arditi, D, Kale, S and Tangkar, M (1997) Innovation in Construction Equipment and Its Flow into the Construction Industry. Journal of Construction Engineering and Management, 123(04), 371–8.

Arditi, D, Khisty, C J and Yasamis, F (1997) Incentive/Disincentive Provisions in Highway Contracts. Journal of Construction Engineering and Management, 123(03), 302–7.

Arditi, D, Koksal, A and Kale, S (2000) Business failures in the construction industry. Engineering, Construction and Architectural Management, 7(02), 120–32.

Arditi, D, Sikangwan, P and Tokdemir, O B (2002) Scheduling system for high rise building construction. Construction Management and Economics, 20(04), 353-64.

Arditi, D, Tokdemir, O B and Suh, K (2002) Challenges in Line-of-Balance Scheduling. Journal of Construction Engineering and Management, 128(06), 545–56.

Arditi, D, Tokdemir, O B and Suh, K (2001) Scheduling system for repetitive unit construction using line-of-balance technology. Engineering, Construction and Architectural Management, 8(02), 90–103.

Arefizadeh, H and Shahir, H (2020) Three-dimensional analysis of anchored wall with concrete bearing pads. Journal of Engineering, Design and Technology , 18(06), 1469–86.

Arensman, D B and Ozbek, M E (2012) Building Information Modeling and Potential Legal Issues. International Journal of Construction Education and Research, 8(02), 146-56.

Arewa, A and Farrell, P (2012) A review of compliance with health and safety regulations and economic performance in small and medium construction enterprises . In: Smith, S.D (Ed.), Proceedings 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK. Association of Researchers in Construction Management, 423–32.

Arewa, A and Farrell, P (2015) The culture of construction organisations: the epitome of institutionalised corruption. Construction Economics and Building, 15(03), 59-71.

Ariaratnam, S T and MacLeod, C W (2002) Financial Outlay Modeling for a Local Sewer Rehabilitation Strategy. Journal of Construction Engineering and Management, 128(06), 486–95.

Ariaratnam, S T, Lueke, J S and Allouche, E N (1999) Utilization of Trenchless Construction Methods by Canadian Municipalities. Journal of Construction Engineering and Management, 125(02), 76–86.

Ariaratnam, S T, Piratla, K, Cohen, A and Olson, M (2013) Quantification of Sustainability Index for Underground Utility Infrastructure Projects. Journal of Construction Engineering and Management, 139(12).

Arif, A A and Karam, A H (2005) Architectural practices and IT: local vs international. Journal of Engineering, Design and Technology, 3(02), 155–63.

Arif, M, Al Zubi, M, Gupta, A D, Egbu, C, Walton, R O and Islam, R (2017) Knowledge sharing maturity model for Jordanian construction sector. Engineering, Construction and Architectural Management, 24(01), 170-88.

Arif, M, Bendi, D, Toma-Sabbagh, T and Sutrisna, M (2012) Construction waste management in India: an exploratory study. Construction Innovation, 12(02), 133-55.

Arif, M, Egbu, C and Toma, T (2010) Knowledge retention in construction in the UAE. In: Egbu, C (Ed.), Proceedings 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK. Association of Researchers in Construction Management, Vol. 2, 887–96.

Arif, M, Egbu, C, Alom, O and Khalfan, M M A (2009) Measuring knowledge retention: a case study of a construction consultancy in the UAE. Engineering, Construction and Architectural Management, 16(01), 92–108.

Arif, M, Egbu, C, Haleem, A, Kulonda, D and Khalfan, M (2009) State of green construction in India: drivers and challenges. Journal of Engineering, Design and Technology, 7(02), 223–34.

Arif, M, Khalfan, M, Barnard, J and Heller, N (2012) Assessing knowledge retention in construction organisations: cases from the UAE. Australasian Journal of Construction Economics and Building, 12(02), 55-71.

Arif, M, Mohammed, A-Z and Gupta, A D (2015) Understanding knowledge sharing in the Jordanian construction industry. Construction Innovation, 15(03), 333-54.

Ariffin, M H and Jaafar, N (2007) Entry participation motivations in co-curricular activities: the case of construction management students at a Malaysian university. International Journal of Construction Education and Research, 3(01), 17–34.

Ariffin, M H and Torrance, J V (2008) Social group related entry participation motivations for continuing professional development activities among malaysian registered quantity surveyors. Journal of Construction in Developing Countries, 13(2), 1-19.

Ariyachandra, M R M F and Brilakis, I (2020) Detection of Railway Masts in Airborne LiDAR Data. Journal of Construction Engineering and Management, 146(09).

Arjun, R A S and Vinodh, S (2016) A case study on application of ORESTE for agile concept selection. Journal of Engineering, Design and Technology, 14(04), 781-801.

Arlain, A G and Rakhra, A S (1988) Building code assessment framework. Construction Management and Economics, 6(02), 117-31.

Arnold, P and Javernick-Will, A (2013) Projectwide Access: Key to Effective Implementation of Construction Project Management Software Systems. Journal of Construction Engineering and Management, 139(05), 510–8.

Arowoiya, V A, Oke, A E, Aigbavboa, C O and Aliu, J (2020) An appraisal of the adoption internet of things (IoT) elements for sustainable construction. Journal of Engineering, Design and Technology, 18(05), 1193–208.

Arowosafe, O, Ceranic, B and Dean, A M (2015) A sustainable infrastructure delivery model: Value added strategy in the Nigerian construction industry. In: Raiden, A and Aboagye-Nimo, E (Eds.), Proceedings 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK. Association of Researchers in Construction Management, 1229–1238.

Arriagada D., R E and Alarcón C., L F (2014) Knowledge Management and Maturation Model in Construction Companies. Journal of Construction Engineering and Management, 140(04).

Arriagada D., R E and Alarcón C., L F (2014) Modelo de Gestión y Maduración de Conocimiento en Empresas Constructoras. Journal of Construction Engineering and Management, 140(04).

Arroyo, P, Tommelein, I D and Ballard, G (2015) Comparing AHP and CBA as Decision Methods to Resolve the Choosing Problem in Detailed Design. Journal of Construction Engineering and Management, 141(01).

Arroyo, P, Tommelein, I D and Ballard, G (2016) Selecting Globally Sustainable Materials: A Case Study Using Choosing by Advantages. Journal of Construction Engineering and Management, 142(02).

Arshad, H, Qasim, M, Thaheem, M J and Gabriel, H F (2017) Quantification of material wastage in construction industry of Pakistan: An analytical relationship between building types and waste generation. Journal of Construction in Developing Countries, 22(2), 19-34.

Arshad, M F, Thaheem, M J, Nasir, A R and Malik, M S A (2019) Contractual Risks of Building Information Modeling: Toward a Standardized Legal Framework for Design-Bid-Build Projects. Journal of Construction Engineering and Management, 145(04).

Arslan, M, Cruz, C, Roxin, A and Ginhac, D (2018) Spatio-temporal analysis of trajectories for safer construction sites. Smart and Sustainable Built Environment, 7(01), 80–100.

Art Chaovalitwongse, W, Wang, W, Williams, T P and Chaovalitwongse, P (2012) Data Mining Framework to Optimize the Bid Selection Policy for Competitively Bid Highway Construction Projects. Journal of Construction Engineering and Management, 138(02), 277–86.

Arthur, A C and Pryke, S D (2014) Are we adding risk to our projects by mixing objective assessments of compound conjunctive and disjunctive project risks with intuitive approaches?. In: Raiden, A and Aboagye-Nimo, E (Eds.), Proceedings 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK, Association of Researchers in Construction Management, 1399–1408.

Artmann, N, Gyalistras, D, Manz, H and Heiselberg, P (2008) Impact of climate warming on passive night cooling potential. Building Research & Information, 36(02), 28.

Arumala, J O (2006) Mold and the construction industry. International Journal of Construction Education and Research, 2(02), 75-89.

Arumsari, P and Rarasati, A D (2017) Maintenance strategy for public-rented residential building: A case study in Jakarta, Indonesia. Built Environment Project and Asset Management, 7(01), 99-110.

Aryal, A and Wilkinson, S (2019) The role of social capital in the recovery of cultural built heritage. International Journal of Disaster Resilience in the Built Environment, 11(01), 44–57.

Asa, E, Anna, A S and Baffoe-Twum, E (2019) An investigation of mechanical behavior of concrete containing crushed waste glass. Journal of Engineering, Design and Technology , 17(06), 1285–303.

Asa, E, Shrestha, M, Baffoe-Twum, E and Awuku, B (2020) Development of sustainable construction material from fly ash class C. Journal of Engineering, Design and Technology , 18(06), 1615–40.

Asad, M M, Hassan, R B, Sherwani, F, Aamir, M, Soomro, Q M and Sohu, S (2019) Design and development of a novel knowledge-based decision support system for industrial safety management at drilling process. Journal of Engineering, Design and Technology , 17(04), 705–18.

Asad, M M, Hassan, R B, Sherwani, F, Abbas, Z, Shahbaz, M S and Soomro, Q M (2019) Identification of effective safety risk mitigating factors for well control drilling operation. Journal of Engineering, Design and Technology, 17(01), 218–29.

Asad, M M, Hassan, R B, Sherwani, F, Rind, I A and Maiji, Y (2019) Development of a novel safety and health educational management information system (HAZ-PRO) for oil and gas production operation. Journal of Engineering, Design and Technology , 18(05), 959–71.

Asad, S and Dainty, A R J (2005) Job motivational factors for disparate occupational groups within the UK construction sector: a comparative analysis. Journal of Construction Research, 6(02), 223–36.

Asad, S, Fuller, P, Pan, W and Dainty, A R J (2005) Learning to innovate in construction: a case study. In: Khosrowshahi, F (Ed.), Proceedings 21st Annual ARCOM Conference, 7-9 September 2005, London, UK. Association of Researchers in Construction Management, Vol. 2, 1215–24.

Asadi, M and Karami, J (2019) Modeling of the city evacuation plan in case of earthquake with particle swarm optimization (PSO) and imperialist competition algorithm (ICA). International Journal of Disaster Resilience in the Built Environment, 11(01), 134–51.

Asao, K, Miyamoto, T, Kato, H and Diaz, C E D (2013) Comparison of revenue guarantee programs in build-operation-transfer projects. Built Environment Project and Asset Management, 3(02), 214-27.

Ascione, F, Bellia, L, Mazzei, P and Minichiello, F (2010) Solar gain and building envelope: the surface factor. Building Research & Information, 38(02), 205.

Asfour, O S and Gadi, M B (2006) Effect of integrating wind catchers with curved roofs on natural ventilation performance in buildings. Architectural Engineering and Design Management, 2(04), 289–304.

Asgari, S, Afshar, A and Madani, K (2014) Cooperative Game Theoretic Framework for Joint Resource Management in Construction. Journal of Construction Engineering and Management, 140(03).

Asgary, A and Azimi, N (2019) Choice of emergency shelter: valuing key attributes of emergency shelters. International Journal of Disaster Resilience in the Built Environment, 10(02–03), 130–50.

Ashcroft, D, Egbelakin, T, Jing, J and Rasheed, E O (2019) Cost comparison of seismic damage resisting systems for modules in multi-storey buildings. Journal of Engineering, Design and Technology, 17(02), 330–46.

Ashdown, M M, Crawley, J, Biddulph, P, Wingfield, J, Lowe, R and Elwell, C A (2019) Characterising the airtightness of dwellings. International Journal of Building Pathology and Adaptation, 38(01), 89–106.

Ashley, D B and Bonner, J J (1987) Political Risks in International Construction. Journal of Construction Engineering and Management, 113(03), 447–67.

Ashley, D B, Uehara, K and Robinson, B E (1983) Critical Decision Making During Construction. Journal of Construction Engineering and Management, 109(02), 146–62.

Ashraf, H and Rowlinson, S (2015) The importance of context in conflict management: Explicating the notion of conflict management climate and agenda setting for future research. In: Raiden, A and Aboagye-Nimo, E (Eds.), Proceedings 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK. Association of Researchers in Construction Management, 1021–1030.

Ashton, P (2003) A system designed to improve site investigation procedures and for the reduction of risk associated with uncertain site conditions, Unpublished PhD Thesis, School of the Built Environment, University of Brighton.

Ashton, P and Gidado, K (2001) Risk associated with inadequate site investigation procedures under design and build procurement systems. In: Akintoye, A (Ed.), Proceedings 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK. Association of Researchers in Construction Management, Vol. 1, 961–9.

Ashton, P and Gidado, K (2003) The development of a project and site investigation risk evaluation model. In: Greenwood, D J (Ed.), Proceedings 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK. Association of Researchers in Construction Management, Vol. 1, 403–11.

Ashton, P and Gidado, K (2002) The identification of uncertainty and risk associated with inadequate site investigation procedures relative to project complexity. In: Greenwood, D (Ed.), Proceedings 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK. Association of Researchers in Construction Management, Vol. 1, 371–9.

Ashton, P and Gidado, K (2004) The practical application of a site investigation risk evaluation system. In: Khosrowshahi, F (Ed.), Proceedings 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK. Association of Researchers in Construction Management, Vol. 2, 1281–92.

Ashuri, B and Lu, J (2010) Time Series Analysis of ENR Construction Cost Index. Journal of Construction Engineering and Management, 136(11), 1227–37.

Ashuri, B and Tavakolan, M (2012) Fuzzy Enabled Hybrid Genetic Algorithm–Particle Swarm Optimization Approach to Solve TCRO Problems in Construction Project Planning. Journal of Construction Engineering and Management, 138(09), 1065–74.

Ashuri, B, Kashani, H, Molenaar, K R, Lee, S and Lu, J (2012) Risk-Neutral Pricing Approach for Evaluating BOT Highway Projects with Government Minimum Revenue Guarantee Options. Journal of Construction Engineering and Management, 138(04), 545–57.

Ashuri, B, Lu, J and Kashani, H (2011) A real options framework to evaluate investments in toll road projects delivered under the two-phase development strategy. Built Environment Project and Asset Management, 1(01), 14-31.

Ashuri, B, Shahandashti, S M and Lu, J (2012) Empirical tests for identifying leading indicators of ENR Construction Cost Index. Construction Management and Economics, 30(11), 917-27.

Ashuri, B, Wang, J, Shahandashti, M and Baek, M (2019) A data envelopment analysis (DEA) model for building energy benchmarking. Journal of Engineering, Design and Technology , 17(04), 747–68.

Asiedu, R O (2017) Using lateritic gravel as all-in aggregate for concrete production. Journal of Engineering, Design and Technology, 15(03), 305-16.

Asiedu, R O and Gyadu-Asiedu, W (2019) Assessing the predictability of construction time overruns using multiple linear regression and Markov chain Monte Carlo. Journal of Engineering, Design and Technology , 18(03), 583–600.

Asiedu, R O, Adaku, E and Owusu-Manu, D-G (2017) Beyond the causes: Rethinking mitigating measures to avert cost and time overruns in construction projects. Construction Innovation, 17(03), 363-80.

Asiedu, R O, Frempong, N K and Alfen, H W (2017) Predicting likelihood of cost overrun in educational projects. Engineering, Construction and Architectural Management, 24(01), 21-39.

Asiedu, R O, Frempong, N K and Nani, G (2016) Parametric time overrun estimation of building projects. Journal of Financial Management of Property and Construction, 21(03), 253-68.

Asif, M, Hassanain, M A, Nahiduzzaman, K M and Sawalha, H (2019) Techno-economic assessment of application of solar PV in building sector. Smart and Sustainable Built Environment, 8(01), 34–52.

Asigri, E O, Afram, S O and Ameyaw, C (2021) Fire safety design attributes of students' housing facilities in KNUST Ghana. African Journal of Built Environment Research, 5(1), 41-58.

Asimakopoulou, E, Anumba, C J and Bouchlaghem, N M (2004) Emergency response management: a review of current approaches. In: Khosrowshahi, F (Ed.), Proceedings 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK. Association of Researchers in Construction Management, Vol. 2, 1187–96.

Asjad, M, Kulkarni, M S and Gandhi, O P (2016) Supportability issues of mechanical systems for their useful life. Journal of Engineering, Design and Technology, 14(01), 33-53.

Aslani, F, Amini Hosseini, K and Fallahi, A (2020) A framework for earthquake resilience at neighborhood level. International Journal of Disaster Resilience in the Built Environment, 11(04), 557–75.

Asli, R A, Wedawatta, G, Hedges, P and Park, K (2016) Building Environmental Assessment Scheme for Residential Building in Brunei. In: Chan, P W and Neilson, C J (Eds.), Proceedings 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester UK. Association of Researchers in Construction Management, 435–444.

Asmar, M E, Hanna, A S and Whited, G C (2011) New Approach to Developing Conceptual Cost Estimates for Highway Projects. Journal of Construction Engineering and Management, 137(11), 942–9.

Asnaashari, E, Knight, A, Hurst, A and Farahani, S S (2009) Causes of construction delays in Iran: project management, logistics, technology and environment. In: Dainty, A R J (Ed.), Proceedings 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK. Association of Researchers in Construction Management, Vol. 2, 887–906.

Aspin, R (2007) A plausible lightweight dirt model for application in real-time 3D environments. Architectural Engineering and Design Management, 3(03), 181–94.

Assaad, R and El-adaway, I H (2021) Determining Critical Combinations of Safety Fatality Causes Using Spectral Clustering and Computational Data Mining Algorithms. Journal of Construction Engineering and Management, 147(05).

Assaad, R and El-adaway, I H (2020) Enhancing the Knowledge of Construction Business Failure: A Social Network Analysis Approach. Journal of Construction Engineering and Management, 146(06), 04020052.

Assaad, R, El-Adaway, I H and Abotaleb, I S (2020) Predicting Project Performance in the Construction Industry. Journal of Construction Engineering and Management, 146(05).

Assaad, R, El-adaway, I H, El Hakea, A H, Parker, M J, Henderson, T I, Salvo, C R and Ahmed, M O (2020) Contractual Perspective for BIM Utilization in US Construction Projects. Journal of Construction Engineering and Management, 146(12).

Assaad, R, El-adaway, I H, Hastak, M and Needy, K L (2020) Commercial and Legal Considerations of Offsite Construction Projects and their Hybrid Transactions. Journal of Construction Engineering and Management, 146(12).

Assad, A, Moselhi, O and Zayed, T (2021) Resilience-Driven Sustainability-Based Rehabilitation Planning for Water Distribution Networks. Journal of Construction Engineering and Management, 147(08).

Assad, M, Hosny, O, Elhakeem, A and El Haggar, S (2015) Green building design in Egypt from cost and energy perspectives. Architectural Engineering and Design Management, 11(01), 21-40.

Assaf, S A (1987) Feasibility assessment of large-scale housing development in Saudi Arabia: a case study. Construction Management and Economics, 5(02), 157-68.

Assaf, S A and Barhamain, S Y (1996) Factors affecting construction practices in Makkah Al-Mukkaramah, Saudi Arabia. Building Research & Information, 24(01), 27–30.

Assaf, S A, Al-Hammad, A M and Ubaid, A (1996) Factors affecting construction contractors' performance. Building Research & Information, 24(03), 159–63.

Assaf, S A, Al-Musallami, A I and Shash, A A (1996) Professional architectural/engineering consultancy practices in Saudi Arabia. Building Research & Information, 24(01), 59–62.

Assaf, S A, Al-Musallami, A I and Sughaiyer, M A (1996) Value engineering in public construction projects in Saudi Arabia. Building Research & Information, 24(03), 152–8.

Assaf, S, Hassanain, M A and Abdallah, A (2018) Review and assessment of the causes of deficiencies in design documents for large construction projects. International Journal of Building Pathology and Adaptation, 36(03), 300–17.

Assaf, S, Hassanain, M A, Abdallah, A, Sayed, A M and Alshahrani, A (2019) Significant causes of claims and disputes in construction projects in Saudi Arabia. Built Environment Project and Asset Management, 9(05), 597–615.

Assefa Tsehayae, A and Robinson Fayek, A (2016) Developing and Optimizing Context-Specific Fuzzy Inference System-Based Construction Labor Productivity Models. Journal of Construction Engineering and Management, 142(07).

Atalah, A (2008) Effect of Rock Trenching Vibrations on Nearby Structures. Journal of Construction Engineering and Management, 134(04), 234–41.

Atanasov, V, Greenwood, D and Robson, S (2020) The Management of Disputes as an Element of Construction Transaction Costs: An Empirical Study. In: Scott, L and Neilson, C J (Eds.), Proceedings 36th Annual ARCOM Conference, 7-8 September 2020, UK, Association of Researchers in Construction Management, 235-244.

Ateloye, A, Bowles, G and Oyegoke, A (2016) Private Sector Participation in Nigeria Higher Education Infrastructure Development. In: Chan, P W and Neilson, C J (Eds.), Proceedings 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester UK. Association of Researchers in Construction Management, 921–929.

Athanasakis, D (2007) Has multiparty arbitration failed in construction disputes? Legal and practical issues in drafting joinder provisions. In: Boyd, D (Ed.), Proceedings 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK. Association of Researchers in Construction Management, Vol. 1, 107–16.

Athapaththu, K I and Karunasena, G (2018) Framework for sustainable construction practices in Sri Lanka. Built Environment Project and Asset Management, 8(01), 51–63.

Athena, R and Nicola, C (2010) A strategic partnering framework analysis methodology for public-private partnerships. Journal of Financial Management of Property and Construction, 15(03), 235–46.

Atherinis, D, Bakowski, B, Velcek, M and Moon, S (2018) Developing and Laboratory Testing a Smart System for Automated Falsework Inspection in Construction. Journal of Construction Engineering and Management, 144(03).

Atkin, B (1993) Stereotypes and themes in building designs: insights for model builders. Construction Management and Economics, 11(02), 119-30.

Atkin, B and Bildsten, L (2017) A future for facility management. Construction Innovation, 17(02), 116-24.

Atkin, B L and Gill, E M (1986) CAD and Management of Construction Projects. Journal of Construction Engineering and Management, 112(04), 557–65.

Atkins, J and Wild, A (2000) Automotive facilities procurement and the new construction paradigm. In: Akintoye, A (Ed.), Proceedings 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK. Association of Researchers in Construction Management, Vol. 1, 189–98.

Atkins, R and Emmanuel, R (2014) Could refurbishment of “traditional” buildings reduce carbon emissions?. Built Environment Project and Asset Management, 4(03), 221-37.

Atkinson, A (1997) The management of construction failures and defects. In: Stephenson, P (Ed.), Proceedings 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK. Association of Researchers in Construction Management, Vol. 1, 342–52.

Atkinson, A R (1998) Human error in the management of building projects. Construction Management and Economics, 16(03), 339-49.

Atkinson, A R (1999) The management of error in construction projects, Unpublished PhD Thesis, , University College London.

Atkinson, A R (2002) The pathology of building defects; a human error. Engineering, Construction and Architectural Management, 9(01), 53–61.

Atkinson, A R and Westall, R (2010) The relationship between integrated design and construction and safety on construction projects. Construction Management and Economics, 28(09), 17.

Atkinson, B (2000) INCA: a retrospective performance tool for project management. In: Akintoye, A (Ed.), Proceedings 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK. Association of Researchers in Construction Management, Vol. 2, 537–44.

Atkinson, G (2008) Sustainability, the capital approach and the built environment. Building Research & Information, 36(03), 241–7.

Atmaca, N (2017) Life-cycle assessment of post-disaster temporary housing. Building Research & Information, 45(05), 524-38.

Atta, A, Ali, N, Taman, M and Etman, E (2018) Improvement the structural behavior of recycled RC elements using CdO nanoparticles. Construction Innovation, 18(02), 134–51.

Attalla, M and Hegazy, T (2003) Predicting Cost Deviation in Reconstruction Projects: Artificial Neural Networks versus Regression. Journal of Construction Engineering and Management, 129(04), 405–11.

Attallah, S O, Senouci, A, Kandil, A and Al-Derham, H (2013) Utilization of life-cycle analysis to evaluate sustainability rating systems for construction projects with a case study on Qatar Sustainability Assessment System (QSAS). Smart and Sustainable Built Environment, 2(03), 272-87.

Attar, A, Boudjakdji, M A, Bhuiyan, N, Grine, K, Kenai, S and Aoubed, A (2009) Integrating numerical tools in underground construction process. Engineering, Construction and Architectural Management, 16(04), 376–91.

Attarzadeh, M, Chua, D K H, Beer, M and Abbott, E L S (2017) Options-based negotiation management of PPP-BOT infrastructure projects. Construction Management and Economics, 35(11-12), 676-92.

Attia, D A, Maarouf, I, Taha, D and Nassar, D (2020) Detecting failures in conservation practice in relation to cultural significance: the case of heritage buildings in Khartoum. Building Research & Information, 48(02), 124–39.

Attia, M K M (2013) LEED as a tool for enhancing affordable housing sustainability in Saudi Arabia: The case of Al-Ghala project. Smart and Sustainable Built Environment, 2(03), 224-50.

Attoh-Okine, N O (2003) Rule induction in productivity analysis: a rough set approach. Engineering, Construction and Architectural Management, 10(06), 413–7.

Attrill, R and Mickovski, S B (2020) Issues to be Addressed with Current BIM Adoption, Prior to the Implementation of BIM Level 3. In: Scott, L and Neilson, C J (Eds.), Proceedings 36th Annual ARCOM Conference, 7-8 September 2020, UK, Association of Researchers in Construction Management, 336-345.

Atuahene, B T, Kanjanabootra, S and Gajendra, T (2020) Benefits of Big Data Application Experienced in the Construction Industry: A Case of an Australian Construction Company. In: Scott, L and Neilson, C J (Eds.), Proceedings 36th Annual ARCOM Conference, 7-8 September 2020, UK, Association of Researchers in Construction Management, 346-355.

Atuahene, B T, Kanjanabootra, S and Gajendran, T (2018) Towards an Integrated Framework of Big Data Capabilities in the Construction Industry: A Systematic Literature Review. In: Gorse, C and Neilson, C J (Eds.), Proceedings 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK. Association of Researchers in Construction Management, 547–556.

Atwal, P, Morton, P and Watts, N (2007) Mentoring in built environment higher education courses. In: Boyd, D (Ed.), Proceedings 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK. Association of Researchers in Construction Management, Vol. 1, 335–43.

Au-Yong, C P, Chua, S J L, Ali, A S and Tucker, M (2019) Optimising maintenance cost by prioritising maintenance of facilities services in residential buildings. Engineering, Construction and Architectural Management, 26(08), 1593–607.

Au, T and Hendrickson, C (1986) Profit Measures for Construction Projects. Journal of Construction Engineering and Management, 112(02), 273–86.

Auchey, F L and Auchey, G J (2004) Picking successful projects by using the prism LLTM model. In: Khosrowshahi, F (Ed.), Proceedings 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK. Association of Researchers in Construction Management, Vol. 2, 1135–44.

Auchterlounie, T (2006) An example of partnering between a North American speculative housebuilder and their subcontractors. In: Boyd, D (Ed.), Proceedings 22nd Annual ARCOM Conference, 4-6 September 2006 Birmingham, UK. Association of Researchers in Construction Management, Vol. 1, 425–34.

Augenbroe, G and Park, C-S (2005) Quantification methods of technical building performance. Building Research & Information, 33(02), 159–72.

Augenbroe, G, Castro, D and Ramkrishnan, K (2009) Decision model for energy performance improvements in existing buildings. Journal of Engineering, Design and Technology, 7(01), 21–36.

Augenbroe, G, Verheij, H and Schwarzmuller, G (2002) Project web sites with design management extensions. Engineering, Construction and Architectural Management, 9(03), 259–71.

Aulich, T (2013) The role of effective communication in the construction Industry: a guide for education and health clients. Australasian Journal of Construction Economics and Building, 13(04), 92-101.

Aune, M (2012) Making energy visible in domestic property markets: the influence of advertisements. Building Research & Information, 40(06), 713-23.

Austigard, M S and Mattsson, J (2019) Monitoring climate change related biodeterioration of protected historic buildings. International Journal of Building Pathology and Adaptation, 38(04), 529–38.

Austin, C O (2011) A contingent valuation model for assessing electricity demand. Journal of Financial Management of Property and Construction, 16(02), 126–46.

Austin, R B, Pishdad-Bozorgi, P and de la Garza, J M (2016) Identifying and Prioritizing Best Practices to Achieve Flash Track Projects. Journal of Construction Engineering and Management, 142(02).

Austin, S A, Baldwin, A N and Newton, A (1994) Manipulating the flow of design information to improve the programming of building design. Construction Management and Economics, 12(05), 445-55.

Austin, S A, Baldwin, A N and Steele, J L (2002) Improving building design through integrated planning and control. Engineering, Construction and Architectural Management, 9(03), 249–58.

Austin, S A, Baldwin, A N, Baizhan, L and Waskett, P (2000) Analytical design planning technique (ADePT): a dependency structure matrix tool to schedule the building design process. Construction Management and Economics, 18(02), 173-82.

Austin, S A, Thorpe, A, Root, D, Thomson, D and Hammond, J (2007) Integrated collaborative design. Journal of Engineering, Design and Technology, 5(01), 7–22.

Austin, S, Baldwin, A and Waskett, P (1997) Development of a prototype building design management tool. In: Stephenson, P (Ed.), Proceedings 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK. Association of Researchers in Construction Management, Vol. 2, 399–407.

Avetisyan, H G, Miller-Hooks, E and Melanta, S (2012) Decision Models to Support Greenhouse Gas Emissions Reduction from Transportation Construction Projects. Journal of Construction Engineering and Management, 138(05), 631–41.

Avila, J, Rapp, R, Dunbar, S and Jackson, A T (2021) Burnout and Worklife in Disaster Restoration: Maslach Burnout Inventory and Areas of Worklife Survey. Journal of Construction Engineering and Management, 147(02).

Awad, A and Fayek, A R (2013) Adaptive Learning of Contractor Default Prediction Model for Surety Bonding. Journal of Construction Engineering and Management, 139(06), 694–704.

Awakul, P and Ogunlana, S O (2002) The effect of attitudinal differences on interface conflicts in large scale construction projects: a case study. Construction Management and Economics, 20(04), 365-77.

Awale, R and Rowlinson, S (2014) A conceptual framework for achieving firm competitiveness in construction: A 'creating shared value' (CSV) concept. In: Raiden, A and Aboagye-Nimo, E (Eds.), Proceedings 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK, Association of Researchers in Construction Management, 1285–94.

Awale, R and Rowlinson, S (2015) An exploratory study of a CSV concept for achieving firm competitiveness in Hong Kong construction firms . In: Raiden, A and Aboagye-Nimo, E (Eds.), Proceedings 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK. Association of Researchers in Construction Management, 947–956.

Awang, H and Wan Badaruzzaman, W H (2009) The bending behaviour of a 'reversed' profiled steel sheet dry board panel for application in a roofing system. Journal of Construction in Developing Countries, 14(2), 21-35.

Awe, E M, Stephenson, P and Griffith, A (2009) An assessment of education and training needs of skilled operatives within the Nigerian construction industry. In: Dainty, A R J (Ed.), Proceedings 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK. Association of Researchers in Construction Management, Vol. 1, 685–94.

Awil, A and Aziz, A R A (2002) International markets: Malaysian construction contractors and the stage theory. Australian Journal of Construction Economics and Building, 2(01), 94-106.

Awodele, O A, Aghimien, D O, Akinkunmi, O G and Aigbavboa, C O (2019) Labour-only procurement. Journal of Engineering, Design and Technology, 17(02), 347–61.

Awolusi, I G and Marks, E D (2017) Safety Activity Analysis Framework to Evaluate Safety Performance in Construction. Journal of Construction Engineering and Management, 143(03).

Awuzie, B and McDermott, P (2016) A systems approach to assessing organisational viability in project-based organisations. Built Environment Project and Asset Management, 6(03), 268-83.

Awuzie, B O and McDermott, P (2015) A conceptual model for evaluating infrastructure-based temporary multi-organisations. Built Environment Project and Asset Management, 5(01), 103-20.

Axon, C J, Bright, S J, Dixon, T J, Janda, K B and Kolokotroni, M (2012) Building communities: reducing energy use in tenanted commercial property. Building Research & Information, 40(04), 461-72.

Axon, S and Morrissey, J (2020) Just energy transitions? Social inequities, vulnerabilities and unintended consequences. Buildings and Cities, 1(01), 393–411.

Ayadi, A, Nasraoui, H, Driss, Z, Bouabidi, A and Abid, M S (2018) Unsteady state of a solar chimney power plant accoupled with a turbine: case study. Journal of Engineering, Design and Technology, 16(02), 244–55.

Aye, L and Fuller, R (2005) An evaluation of a proposed ventilation system for Melbourne's CH2 building. Australian Journal of Construction Economics and Building, 5(02), 47-57.

Aye, L and Fuller, R (2005) The proposed heating and cooling system in the CH2 building and its impact on occupant productivity. Australian Journal of Construction Economics and Building, 5(02), 32-39.

Aye, L, Bamford, N, Charters, B and Robinson, J (1999) Environmentally sustainable development: a life cycle costing approach for a commercial office building in Melbourne, Australia. In: Hughes, W (Ed.), Proceedings 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK. Association of Researchers in Construction Management, Vol. 2, 735–42.

Aye, L, Bamford, N, Charters, B and Robinson, J (2000) Environmentally sustainable development: a life-cycle costing approach for a commercial office building in Melbourne, Australia. Construction Management and Economics, 18(08), 927-34.

Aye, L, Bamford, N, Charters, B and Robinson, J (2002) The carbon footprint of a new commercial building. In: Greenwood, D (Ed.), Proceedings 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK. Association of Researchers in Construction Management, Vol. 1, 129–36.

Aye, L, Charters, W W S, Chiazor, M A and Robinson, J R W (2004) Indoor environment quality and sustainable development for commercial buildings in Australia. In: Khosrowshahi, F (Ed.), Proceedings 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK. Association of Researchers in Construction Management, Vol. 1, 277–86.

Ayegba, C (2018) Duties and required competencies of a management contractor. Journal of Construction Business and Management, 2(1), 1-9.

Ayegba, C and Root, D (2019) Application of Signalling Theory in Contractor Selection for Long-Term Collaborative Relationships in Construction. In: Gorse, C and Neilson, C J (Eds.), Proceedings 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK Association of Researchers in Construction Management, 294-303.

Ayeleso, A O and van Zyl, R R (2016) Photocurrents obtained from a triple planar probe sensor for in situ extreme ultraviolet (EUV) radiation measurements on low Earth orbiting CubeSats. Journal of Engineering, Design and Technology, 14(03), 641-51.

Ayers, G F, Culvenor, J F, Sillitoe, J and Else, D (2013) Meaningful and effective consultation and the construction industry of Victoria, Australia. Construction Management and Economics, 31(06), 542-67.

Ayhan, B U and Tokdemir, O B (2020) Accident Analysis for Construction Safety Using Latent Class Clustering and Artificial Neural Networks. Journal of Construction Engineering and Management, 146(03).

Ayhan, M, Dikmen, I and Talat Birgonul, M (2021) Predicting the Occurrence of Construction Disputes Using Machine Learning Techniques. Journal of Construction Engineering and Management, 147(04).

Ayinla, K O and Adamu, Z (2018) Bridging the digital divide gap in BIM technology adoption. Engineering, Construction and Architectural Management, 25(10), 1398–416.

Ayinla, K O, Cheung, F and Tawil, A (2019) Demystifying the concept of offsite manufacturing method. Construction Innovation , 20(02), 223–46.

Ayinla, K, Cheung, F and Tawil, R-A (2019) Towards an Ontology-Based Approach to Measuring Productivity for Offsite Manufacturing Method . In: Gorse, C and Neilson, C J (Eds.), Proceedings 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK Association of Researchers in Construction Management, 587-596.

Ayodeji, F J (2014) Evaluation of site managers’ hindrances towards optimal utilisation of construction resources. Journal of Engineering, Design and Technology, 12(03), 348-63.

Ayodele, O A, Chang-Richards, A and González, V (2020) Factors Affecting Workforce Turnover in the Construction Sector: A Systematic Review. Journal of Construction Engineering and Management, 146(02).

Ayodele, O L, Sanusi, K O and Kahn, M T (2019) Nuclear battery: a source of environmentally friendly energy. Journal of Engineering, Design and Technology, 17(01), 172–82.

Ayyub, B M and Haldar, A (1985) Decisions in Construction Operations. Journal of Construction Engineering and Management, 111(04), 343–57.

Ayyub, B M and Haldar, A (1984) Project Scheduling Using Fuzzy Set Concepts. Journal of Construction Engineering and Management, 110(02), 189–204.

Azadeh, A, Kalantari, M, Ahmadi, G and Eslami, H (2019) A flexible genetic algorithm-fuzzy regression approach for forecasting. Construction Innovation , 19(01), 71–88.

Azam, M A M, Ross, A D, Fortune, C J and Jaggar, D (1998) An information strategy to support effective construction design decision making. In: Hughes, W (Ed.), Proceedings 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK. Association of Researchers in Construction Management, Vol. 1, 248–56.

Azambuja, M M, Ponticelli, S and O’Brien, W J (2014) Strategic Procurement Practices for the Industrial Supply Chain. Journal of Construction Engineering and Management, 140(07).

Azeem, S, Naeem, M A, Waheed, A and Thaheem, M J (2017) Examining barriers and measures to promote the adoption of green building practices in Pakistan. Smart and Sustainable Built Environment, 6(03), 86-100.

Azeez, M, Gambatese, J and Hernandez, S (2019) What Do Construction Workers Really Want? A Study about Representation, Importance, and Perception of US Construction Occupational Rewards. Journal of Construction Engineering and Management, 145(07).

Azhar, S and Brown, J (2009) BIM for sustainability analyses. International Journal of Construction Education and Research, 5(04), 276–92.

Azhar, S and Choudhry, R M (2016) Capacity building in construction health and safety research, education, and practice in Pakistan. Built Environment Project and Asset Management, 6(01), 92-105.

Azhar, S, Ahmad, I and Sein, M K (2010) Action Research as a Proactive Research Method for Construction Engineering and Management. Journal of Construction Engineering and Management, 136(01), 87–98.

Azhar, S, Khalfan, M and Maqsood, T (2012) Building information modelling (BIM): now and beyond. Australasian Journal of Construction Economics and Building, 12(04), 15-28.

Azhar, S, Lukkad, M Y and Ahmad, I (2013) An Investigation of Critical Factors and Constraints for Selecting Modular Construction over Conventional Stick-Built Technique. International Journal of Construction Education and Research, 9(03), 203-25.

Aziz, A M A (2007) A survey of the payment mechanisms for transportation DBFO projects in British Columbia. Construction Management and Economics, 25(05), 529–43.

Aziz, A R A, Yi, H S and Jaafar, M (2006) Competitive resources of private housing developers: the Malaysian perspective. Journal of Engineering, Design and Technology, 4(01), 71–80.

Aziz, Z (2005) Context-aware information delivery for mobile construction workers, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Aziz, Z, Anumba, C J and Peña-Mora, F (2010) Using context-aware wireless technologies to support teaching and learning in built environment. International Journal of Construction Education and Research, 6(01), 29.

Aziz, Z, Qasim, R M and Wajdi, S (2017) Improving productivity of road surfacing operations using value stream mapping and discrete event simulation. Construction Innovation, 17(03), 294-323.

Azman, M A (2016) Bidding competitiveness: a comparative analysis of different bid auctions in Malaysia. Journal of Engineering, Design and Technology, 14(04), 678-98.

Azman, M A, Hon, C K H, Skitmore, M, Lee, B L and Xia, B (2019) A Meta-frontier method of decomposing long-term construction productivity components and technological gaps at the firm level: evidence from Malaysia. Construction Management and Economics, 37(02), 72–88.

Azzouz, A and Abdelal, A (2019) Young Syrian Architects (YSA) At the Time of Crises. In: Gorse, C and Neilson, C J (Eds.), Proceedings 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK Association of Researchers in Construction Management, 154- 163.

Azzouz, A and Hill, P (2017) How BIM Is Assessed Using Arup's BIM Maturity Measure? . In: Chan, P W and Neilson, C J (Eds.), Proceedings 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK. Association of Researchers in Construction Management, 35–44.

Azzouz, A and Papadonikolaki, E (2020) Boundary-spanning for managing digital innovation in the AEC sector. Architectural Engineering and Design Management, 16(05), 356–73.

Azzouz, A, Copping, A, Shepherd, P and Duncan, A (2016) Using the ARUP BIM Maturity Measure to Demonstrate BIM Implementation in Practice. In: Chan, P W and Neilson, C J (Eds.), Proceedings 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester UK. Association of Researchers in Construction Management, 25–34.

Azzouz, A, Hill, P and Papadonikolaki, E (2018) Digital Innovation in Europe: Regional Differences across One International Firm. In: Gorse, C and Neilson, C J (Eds.), Proceedings 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK. Association of Researchers in Construction Management, 240–249.

Böhme, T, Escribano, A, Heffernan, E E and Beazley, S (2018) Causes and mitigation for declining productivity in the Australian mid-rise residential construction sector. Built Environment Project and Asset Management, 8(03), 253–66.

Baarts, C (2009) Collective individualism: the informal and emergent dynamics of practising safety in a high-risk work environment. Construction Management and Economics, 27(10), 949–57.

Baba A, Mahjoubi L, Olomoilaiye P, and Colin B (2013) Decision support framework for low impact housing design in the UK. In: Smith, S D and Ahiaga-Dagbui, D D (Eds.), Proceedings 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK, Association of Researchers in Construction Management, 1341–1350.

Baba, K (1990) Principal Nature of Management in Japanese Construction Industry. Journal of Construction Engineering and Management, 116(02), 351–64.

Babalola, O and Adesanya, D A (2008) An appraisal of the factors affecting production of cost estimate for electrical services in Nigeria. Journal of Financial Management of Property and Construction, 13(03), 200–8.

Babalola, O and Adesanya, D A (2007) An evaluation of the level of accuracy of electrical services cost estimates in Nigeria. In: Boyd, D (Ed.), Proceedings 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK. Association of Researchers in Construction Management, Vol. 1, 75–83.

Babangida, I, Olubodun, F and Kangwa, J (2012) Building refurbishment: holistic evaluation of barriers and opportunities. In: Smith, S.D (Ed.), Proceedings 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK. Association of Researchers in Construction Management, 1289–98.

Babar, S, Thaheem, M J and Ayub, B (2017) Estimated Cost at Completion: Integrating Risk into Earned Value Management. Journal of Construction Engineering and Management, 143(03).

Babatunde, S O and Ekundayo, D (2019) Barriers to the incorporation of BIM into quantity surveying undergraduate curriculum in the Nigerian universities. Journal of Engineering, Design and Technology, 17(03), 629–48.

Babatunde, S O and Perera, S (2017) Barriers to bond financing for public-private partnership infrastructure projects in emerging markets: A case of Nigeria. Journal of Financial Management of Property and Construction, 22(01), 2-19.

Babatunde, S O and Perera, S (2017) Cross-sectional comparison of public-private partnerships in transport infrastructure development in Nigeria. Engineering, Construction and Architectural Management, 24(06), 875-900.

Babatunde, S O, Adeniyi, O and Awodele, O A (2017) Investigation into the causes of delay in land acquisition for PPP projects in developing countries. Journal of Engineering, Design and Technology, 15(04), 552-70.

Babatunde, S O, Awodele, O A and Adeniyi, O (2018) Opportunities and challenges of foreign direct investment utilisation and its impact on construction sector in developing countries. Journal of Financial Management of Property and Construction, 23(02), 239–56.

Babatunde, S O, Ekundayo, D and Adekunle, A O (2019) Analysis of BIM Maturity Level among AEC Firms in Developing Countries: A Case of Nigeria . In: Gorse, C and Neilson, C J (Eds.), Proceedings 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK Association of Researchers in Construction Management, 225-234.

Babatunde, S O, Ekundayo, D, Adekunle, A O and Bello, W (2020) Comparative analysis of drivers to BIM adoption among AEC firms in developing countries. Journal of Engineering, Design and Technology , 18(06), 1425–47.

Babatunde, S O, Ekundayo, D, Babalola, O and Jimoh, J A (2018) Analysis of the drivers and benefits of BIM incorporation into quantity surveying profession. Journal of Engineering, Design and Technology, 16(05), 750–66.

Babatunde, S O, Perera, S and Zhou, L (2016) Methodology for developing capability maturity levels for PPP stakeholder organisations using critical success factors. Construction Innovation, 16(01), 81-110.

Babatunde, S O, Perera, S, Ekundayo, D and Adeleye, T E (2019) An investigation into BIM-based detailed cost estimating and drivers to the adoption of BIM in quantity surveying practices. Journal of Financial Management of Property and Construction , 25(01), 61–81.

Babatunde, S O, Perera, S, Zhou, L and Udeaja, C (2015) Barriers to public private partnership projects in developing countries: A case of Nigeria. Engineering, Construction and Architectural Management, 22(06), 669-91.

Babatunde, S O, Perera, S, Zhou, L and Udeaja, C (2016) Stakeholder perceptions on critical success factors for public-private partnership projects in Nigeria. Built Environment Project and Asset Management, 6(01), 74-91.

Baborska-Narożny, M and Stevenson, F (2019) Service controls interfaces in housing: usability and engagement tool development. Building Research & Information, 47(03), 290–304.

Baborska-Narożny, M, Stevenson, F and Grudzińska, M (2017) Overheating in retrofitted flats: Occupant practices, learning and interventions. Building Research & Information, 45(01), 40-59.

Baborska-Narozny, M, Szulgowska-Zgrzywa, M, Mokrzecka, M, Chmielewska, A, Fidorow-Kaprawy, N, Stefanowicz, E, Piechurski, K and Laska, M (2020) Climate justice: air quality and transitions from solid fuel heating. Buildings and Cities, 1(01), 120–40.

Baccarini, D (2004) Estimating project cost contingency: a model and exploration of research questions. In: Khosrowshahi, F (Ed.), Proceedings 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK. Association of Researchers in Construction Management, Vol. 1, 105–13.

Baccarini, D and Kraus, F (2005) Influences on risk taking behaviour of property developers in Perth, Western Australia. In: Khosrowshahi, F (Ed.), Proceedings 21st Annual ARCOM Conference, 7-9 September 2005, London, UK. Association of Researchers in Construction Management, Vol. 1, 179–89.

Baccarini, D and Love, P E D (2014) Statistical Characteristics of Cost Contingency in Water Infrastructure Projects. Journal of Construction Engineering and Management, 140(03).

Bachman, L R (2008) Architecture and the four encounters with complexity. Architectural Engineering and Design Management, 4(01), 15–30.

Back, W E and Bell, L C (1995) Quantifying Process Benefits of Electronic Data Management Technologies. Journal of Construction Engineering and Management, 121(04), 415–21.

Back, W E and Sanders, S R (1998) Industry expectations for engineering graduates. Engineering, Construction and Architectural Management, 5(02), 137–43.

Back, W E, Boles, W W and Fry, G T (2000) Defining Triangular Probability Distributions from Historical Cost Data. Journal of Construction Engineering and Management, 126(01), 29–37.

Back, W E, Grau, D and Mejia-Aguilar, G (2013) Effectiveness Evaluation of Contract Incentives on Project Performance. International Journal of Construction Education and Research, 9(04), 288-306.

Bacon, M (2014) Occupancy analytics: a new basis for low-energy?low-carbon hospital design and operation in the UK. Architectural Engineering and Design Management, 10(01), 146-63.

Badasyan, N (2018) Project feasibility analysis economic model for private investments in the renewable energy sector. Built Environment Project and Asset Management, 8(02), 215–30.

Bademosi, F and Issa, R R A (2021) Factors Influencing Adoption and Integration of Construction Robotics and Automation Technology in the US. Journal of Construction Engineering and Management, 147(08).

Baden-Hellard, R (1996) The partnering philosophy: a procurement strategy for satisfaction through a teamwork solution to project quality. Journal of Construction Procurement, 2(01), 41–55.

Badenfelt, U (2010) I trust you, I trust you not: a longitudinal study of control mechanisms in incentive contracts. Construction Management and Economics, 28(03), 10.

Badenfelt, U (2008) The selection of sharing ratios in target cost contracts. Engineering, Construction and Architectural Management, 15(01), 54–65.

Badenfelt, U (2007) Trust and control in the early phases of target cost contracts. In: Boyd, D (Ed.), Proceedings 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK. Association of Researchers in Construction Management, Vol. 1, 23–32.

Badger, W W and Mulligan, D E (1995) An implementation model of an alliance. Journal of Construction Procurement, 1(01), 21–37.

Badger, W W and Mulligan, D E (1995) Rationale and Benefits Associated with International Alliances. Journal of Construction Engineering and Management, 121(01), 100–11.

Badger, W W and Smith, J C (2006) Ranking construction programs: the academic debate ebgins. International Journal of Construction Education and Research, 2(02), 127-42.

Badger, W, Sullivan, K, Wiezel, A and Bopp, P H (2009) Profiling the leadership of project managers. International Journal of Construction Education and Research, 5(02), 121-46.

Badger, W, Wiezel, A, Bopp, P H and Dunn, S (2010) Leadership transition and growth. International Journal of Construction Education and Research, 6(01), 69.

Badi, S (2017) Public sustainable-energy requirements and innovation in UK PFI school projects. Construction Management and Economics, 35(04), 218-38.

Badi, S and Diamantidou, D (2017) A social network perspective of building information modelling in Greek construction projects. Architectural Engineering and Design Management, 13(06), 406–22.

Badi, S, Ochieng, E, Nasaj, M and Papadaki, M (2021) Technological, organisational and environmental determinants of smart contracts adoption: UK construction sector viewpoint. Construction Management and Economics, 39(01), 36–54.

Badu, E, Edwards, D J and Owusu-Manu, D (2012) Trade credit and supply chain delivery in the Ghanaian construction industry: Analysis of vendor interactions with small to medium enterprises. Journal of Engineering, Design and Technology, 10(03), 360-79.

Badu, E, Edwards, D J, Owusu-Manu, D and Brown, D M (2012) Barriers to the implementation of innovative financing (IF) of infrastructure. Journal of Financial Management of Property and Construction, 17(03), 253-73.

Badu, E, Owusu-Manu, D-G, Edwards, D J, Adesi, M and Lichtenstein, S (2013) Rural infrastructure development in the Volta region of Ghana: barriers and interventions. Journal of Financial Management of Property and Construction, 18(02), 142-59.

Badu, E, Owusu-Manu, D, Edwards, D J and Holt, G D (2013) Analysis of Strategic Issues Underpinning the Innovative Financing of Infrastructure within Developing Countries. Journal of Construction Engineering and Management, 139(06), 726–37.

Bae, S, Asojo, A O and Martin, C S (2020) Impact of occupants’ demographics on indoor environmental quality satisfaction in the workplace. Building Research & Information, 48(03), 301–15.

Bae, S, Martin, C S and Asojo, A O (2021) Indoor environmental quality factors that matter to workplace occupants: an 11-year-benchmark study. Building Research & Information, 49(04), 445–59.

Baek, M and Ashuri, B (2019) Analysis of the Variability of Submitted Unit Price Bids for Asphalt Line Items in Highway Projects. Journal of Construction Engineering and Management, 145(04).

Bageis, A S and Fortune, C (2009) Factors affecting the bid/no bid decision in the Saudi Arabian construction contractors. Construction Management and Economics, 27(01), 53–71.

Baggott S R, Oloke D, Georgakis P and Khatib J (2013) Risk and security challenges on further and higher education campuses. In: Smith, S D and Ahiaga-Dagbui, D D (Eds.), Proceedings 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK, Association of Researchers in Construction Management, 1171–1181.

Bagheri-Zadeh, S, Kim, H, Hounsell, S, Wood, C R, Soleymani, H and King, M (2007) Field Study of Concrete Maturity Methodology in Cold Weather. Journal of Construction Engineering and Management, 133(11), 827–35.

Bagies, A and Fortune, C (2006) Bid/ no-bid decision modelling for construction projects. In: Boyd, D (Ed.), Proceedings 22nd Annual ARCOM Conference, 4-6 September 2006 Birmingham, UK. Association of Researchers in Construction Management, Vol. 1, 511–21.

Bahaa, H D (2000) Privatization in emerging economies: some aspects of the creation of a new legal infrastructure - a case study of Egypt, Unpublished PhD Thesis, Institute of Advanced Legal Studies, University of London.

Bahadorestani, A, Karlsen, J T and Motahari Farimani, N (2019) A Comprehensive Stakeholder-Typology Model Based on Salience Attributes in Construction Projects. Journal of Construction Engineering and Management, 145(09).

Baharudin, M R, Nasruddin, H N, Rahman, A A, Mahadi, M R and Noor, S B M (2018) Numerical model for individual time calculation for evacuation among secondary students. International Journal of Building Pathology and Adaptation, 36(05), 450–70.

Baharun, A, Imran, M S, Ibrahim, S H and Abidin, W A W Z (2018) Night cooled radiant cooling panel for sustainable building cooling mode in Malaysia. Journal of Construction in Developing Countries, 23(1), 61-79.

Bai, S, Li, M, Song, L and Kong, R (2021) Developing a Common Library of Prefabricated Structure Components through Graphic Media Mapping to Improve Design Efficiency. Journal of Construction Engineering and Management, 147(01).

Bai, Y (2007) Intelligent Painting Process Planner for Robotic Bridge Painting. Journal of Construction Engineering and Management, 133(04), 335–42.

Bai, Y and Amirkhanian, S N (1994) Knowledge‐Based Expert System for Concrete Mix Design. Journal of Construction Engineering and Management, 120(02), 357–73.

Bai, Y and Bernold, L E (2001) Quality Control Parameters for Robotic Bridge Painting. Journal of Construction Engineering and Management, 127(02), 142–8.

Bai, Y and Burkett, W R (2006) Rapid Bridge Replacement: Processes, Techniques, and Needs for Improvements. Journal of Construction Engineering and Management, 132(11), 1139–47.

Bai, Y, Burkett, W R and Nash, P T (2006) Lessons Learned from an Emergency Bridge Replacement Project. Journal of Construction Engineering and Management, 132(04), 338–44.

Bai, Y, Kim, S H and Burkett, W R (2007) Enhancing the capability of rapid bridge replacement after extreme events. Engineering, Construction and Architectural Management, 14(04), 375–86.

Baiden, B K (2006) Framework for the integration of the project delivery team, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Baiden, B K, Price, A D F and Dainty, A R J (2003) Looking beyond processes: human factors in team integration. In: Greenwood, D J (Ed.), Proceedings 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK. Association of Researchers in Construction Management, Vol. 1, 233–42.

Baird, A (1995) Pioneering the NEC system of documents. Engineering, Construction and Architectural Management, 2(04), 249–69.

Bajaj, D, Oluwoye, J O and Lenard, D (1997) An analysis of contractors' approaches to risk identification in New South Wales, Australia. Construction Management and Economics, 15(04), 363-9.

Bajjou, M S and Chafi, A (2018) Lean construction implementation in the Moroccan construction industry. Journal of Engineering, Design and Technology, 16(04), 533–56.

Bakatjan, S, Arikan, M and Tiong, R L K (2003) Optimal Capital Structure Model for BOT Power Projects in Turkey. Journal of Construction Engineering and Management, 129(01), 89–97.

Bakens, W (1997) International Trends in Building and Construction Research . Journal of Construction Engineering and Management, 123(02), 102–4.

Bakens, W (1997) International trends in research and technology development. Building Research & Information, 25(06), 335–7.

Bakens, W, Foliente, G and Jasuja, M (2005) Engaging stakeholders in performance-based building: lessons from the Performance-Based Building (PeBBu) Network. Building Research & Information, 33(01), 149–58.

Baker, A J (2019) ‘Suitable and sufficient’? UK regulation of post-construction fire safety, Unpublished PhD Thesis, School of Social & Political Science, University of Edinburgh.

Baker, D and Mahmood, M N (2012) Developing tools to support complex infrastructure decision-making. Smart and Sustainable Built Environment, 1(01), 59-72.

Baker, D and Mahmood, M N (2012) Developing tools to support complex infrastructure decision-making. Smart and Sustainable Built Environment, 1(01), 59-72.

Baker, F (2013) Housing and planning regulation – England and Ireland. International Journal of Law in the Built Environment, 5(02), 118-36.

Baker, H, Smith, S, Masterton, G and Hewlett, B (2020) Data-Led Learning: Using Natural Language Processing (NLP) and Machine Learning to Learn from Construction Site Safety Failures. In: Scott, L and Neilson, C J (Eds.), Proceedings 36th Annual ARCOM Conference, 7-8 September 2020, UK, Association of Researchers in Construction Management, 356-365.

Baker, S, Ponniah, D and Smith, S (1999) Risk response techniques employed currently for major projects. Construction Management and Economics, 17(02), 205-13.

Bakhaty, Y and Kaluarachchi, Y (2020) Critical Success Factors, Barriers and Challenges for Adopting Offsite Prefabrication: A Systematic Literature Review. In: Scott, L and Neilson, C J (Eds.), Proceedings 36th Annual ARCOM Conference, 7-8 September 2020, UK, Association of Researchers in Construction Management, 366-375.

Bakhoum, E S and Brown, D C (2012) Developed Sustainable Scoring System for Structural Materials Evaluation. Journal of Construction Engineering and Management, 138(01), 110–9.

Bakht, M N and El-Diraby, T E (2015) Synthesis of Decision-Making Research in Construction. Journal of Construction Engineering and Management, 141(09).

Bakhtawar, B, Thaheem, M J, Arshad, H and Qadeer, A (2018) How to Embrace the Stakeholder in Public Private Partnership Decision-Making? A Theoretical Discourse. In: Gorse, C and Neilson, C J (Eds.), Proceedings 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK. Association of Researchers in Construction Management, 373–382.

Bakhtiyari, S, Kalali, A, Taghi, A L and Farahbod, F (2017) The experimental behavior of CFRP-strengthened reinforced concrete slabs with fire protection systems subjected to standard fire exposure. International Journal of Disaster Resilience in the Built Environment, 8(03), 238-50.

Bakhtiyari, S, Taghi, A L and Jamali, A M (2017) An investigation on fire hazard and smoke toxicity of epoxy FRP composites. International Journal of Disaster Resilience in the Built Environment, 8(03), 230-7.

Bakry, I, Moselhi, O and Zayed, T (2016) Optimized scheduling and buffering of repetitive construction projects under uncertainty. Engineering, Construction and Architectural Management, 23(06), 782-800.

Bala, K, Bustani, S A and Waziri, B S (2014) A computer-based cost prediction model for institutional building projects in Nigeria: An artificial neural network approach. Journal of Engineering, Design and Technology, 12(04), 519-30.

Balali, V, Zalavadia, A and Heydarian, A (2020) Real-Time Interaction and Cost Estimating within Immersive Virtual Environments. Journal of Construction Engineering and Management, 146(02).

Balasubramani, M, Mahalingam, A and Scott, W R (2020) Imitation and adaptation: lessons from a case study of a metro rail project in India. Construction Management and Economics, 38(04), 364–82.

Balasubramanian, V and Prasad, G S (2007) Manual Bar Bending—An Occupational Hazard for Construction Workers in Developing Nations. Journal of Construction Engineering and Management, 133(10), 791–7.

Balatbat, M C A, Lin, C-y and Carmichael, D G (2010) Comparative performance of publicly listed construction companies: Australian evidence. Construction Management and Economics, 28(09), 32.

Balatbat, M C A, Lin, C-Y and Carmichael, D G (2011) Management efficiency performance of construction businesses: Australian data. Engineering, Construction and Architectural Management, 18(02), 140–58.

Baldissera, P and Delprete, C (2020) From PBL to innovation: a decennial case-study from an HPV student team. Journal of Engineering, Design and Technology , 18(04), 773–86.

Baldry, D (1997) The image of construction and its influence upon clients, participants, and consumers. In: Stephenson, P (Ed.), Proceedings 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK. Association of Researchers in Construction Management, Vol. 1, 52–61.

Baldursdottir, N and Ottosson, E (2012) Managing change through participation: Developing shared construction guidelines in 26 public organisations . In: Smith, S.D (Ed.), Proceedings 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK. Association of Researchers in Construction Management, 863–73.

Baldwin, A N (1982) Computer aided estimating for civil engineering contractors, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Baldwin, A N and McCaffer, R (2000) Identifying research requirements for collaborative design. Journal of Construction Procurement, 6(01), 56–66.

Baldwin, A N, Austin, S A and Pendlebury, M C (1997) Interface of early design and cost advice in the building design process. In: Stephenson, P (Ed.), Proceedings 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK. Association of Researchers in Construction Management, Vol. 2, 389–98.

Baldwin, A N, Austin, S A, Hassan, T M and Thorpe, A (1999) Modelling information flow during the conceptual and schematic stages of building design. Construction Management and Economics, 17(02), 155-67.

Baldwin, A, Li, H, Huang, T, Kong, C W, Guo, H L, Chan, N and Wong, J (2009) Supporting pre-tender construction planning with virtual prototyping. Engineering, Construction and Architectural Management, 16(02), 150–61.

Ball, D and Fortune, C (2000) Building project procurement processes and the development of environmentally friendly housing schemes. In: Akintoye, A (Ed.), Proceedings 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK. Association of Researchers in Construction Management, Vol. 1, 271–9.

Ball, M and Chambers, M (2009) An incentivisation scheme for a major transportation infrastructure project in the UK. In: Dainty, A R J (Ed.), Proceedings 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK. Association of Researchers in Construction Management, Vol. 1, 605–14.

Ball, M and Wood, A (1995) How many jobs does construction expenditure generate?. Construction Management and Economics, 13(04), 307-18.

Ball, M, Farshchi, M and Grilli, M (2000) Competition and the persistence of profits in the UK construction industry. Construction Management and Economics, 18(07), 733-45.

Ball, R (1999) Developers, regeneration and sustainability issues in the re-use of vacant industrial buildings. Building Research & Information, 27(03), 140–8.

Ballal, T M A (1999) The use of artificial neural networks for modelling buildability in preliminary structural design, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Ballal, T M A and Sher, W D (2003) Artificial neural networks for the selection of buildable structural systems. Engineering, Construction and Architectural Management, 10(04), 263–71.

Ballard, G (2003) Lean project management. Building Research & Information, 31(02), 119–33.

Ballard, G (2002) Managing work flow on design projects: a case study. Engineering, Construction and Architectural Management, 9(03), 284–91.

Ballard, G and Howell, G (1998) Shielding Production: Essential Step in Production Control. Journal of Construction Engineering and Management, 124(01), 11–17.

Ballard, G, Harper, N and Zabelle, T (2003) Learning to see work flow: an application of lean concepts to precast concrete fabrication. Engineering, Construction and Architectural Management, 10(01), 6–14.

Ballesteros-Pérez, P, Smith, S T, Lloyd-Papworth, J G and Cooke, P (2018) Incorporating the effect of weather in construction scheduling and management with sine wave curves: application in the United Kingdom. Construction Management and Economics, 36(12), 666–82.

Ballesteros-Pérez, P (2017) M-PERT: Manual Project-Duration Estimation Technique for Teaching Scheduling Basics. Journal of Construction Engineering and Management, 143(09).

Ballesteros-Pérez, P and Skitmore, M (2016) Estimating the number of new and repeated bidders in construction auctions. Construction Management and Economics, 34(12), 919-34.

Ballesteros-Pérez, P and Skitmore, M (2017) On the distribution of bids for construction contract auctions. Construction Management and Economics, 35(03), 106-21.

Ballesteros-Pérez, P, del Campo-Hitschfeld, M L, González-Naranjo, M A and González-Cruz, M C (2015) Climate and construction delays: Case study in Chile. Engineering, Construction and Architectural Management, 22(06), 596-621.

Ballesteros-Pérez, P, González-Cruz, M C, Fuentes-Bargues, J L and Skitmore, M (2015) Analysis of the distribution of the number of bidders in construction contract auctions. Construction Management and Economics, 33(09), 752-70.

Ballesteros-Pérez, P, Phua, F T T and Mora-Melià, D (2019) Human Resource Allocation to Multiple Projects Based on Members’ Expertise, Group Heterogeneity, and Social Cohesion. Journal of Construction Engineering and Management, 145(02).

Ballesteros-Pérez, P, Sanz-Ablanedo, E, Cerezo-Narváez, A, Lucko, G, Pastor-Fernández, A, Otero-Mateo, M and Contreras-Samper, J P (2020) Forecasting Accuracy of In-Progress Activity Duration and Cost Estimates. Journal of Construction Engineering and Management, 146(09).

Ballesteros-Pérez, P, Sanz-Ablanedo, E, Soetanto, R, González-Cruz, M C, Larsen, G D and Cerezo-Narváez, A (2020) Duration and Cost Variability of Construction Activities: An Empirical Study. Journal of Construction Engineering and Management, 146(01).

Ballesteros-Pérez, P, Skitmore, M, Cerezo-Narváez, A, González-Cruz, M C, Pastor-Fernández, A and Otero-Mateo, M (2021) Standard Deviation of Bids for Construction Contract Auctions. Journal of Construction Engineering and Management, 147(08).

Ballesteros-Pérez, P, Skitmore, M, Das, R and del Campo-Hitschfeld, M L (2015) Quick Abnormal-Bid-Detection Method for Construction Contract Auctions. Journal of Construction Engineering and Management, 141(07).

Ballesteros-Pérez, P, Skitmore, M, Pellicer, E and González-Cruz, M C (2015) Scoring rules and abnormally low bids criteria in construction tenders: a taxonomic review. Construction Management and Economics, 33(04), 259-78.

Ballesteros-Pérez, P, Skitmore, M, Pellicer, E and Zhang, X (2016) Scoring Rules and Competitive Behavior in Best-Value Construction Auctions. Journal of Construction Engineering and Management, 142(09).

Ballesteros-Pérez, P, Skitmore, M, Sanz-Ablanedo, E and Verhoeven, P (2019) Forecasting the Number and Distribution of New Bidders for an Upcoming Construction Auction. Journal of Construction Engineering and Management, 145(10).

Balogun, T B (2014) Towards a life cycle framework for bridge management systems in the UK: Insights from a critical review of international approaches and models. In: Raiden, A and Aboagye-Nimo, E (Eds.), Proceedings 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK, Association of Researchers in Construction Management, 63–72.

Baloi, D (2002) A framework for managing global risk factors affecting construction cost performance, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Baloi, D (2003) Sustainable construction: challenges and opportunities. In: Greenwood, D J (Ed.), Proceedings 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK. Association of Researchers in Construction Management, Vol. 1, 289–97.

Balouktsi, M (2020) Carbon metrics for cities: production and consumption implications for policies. Buildings and Cities, 1(01), 233–59.

Balsas, C J L (2017) The right to walk in cities, a comparative review of Macau, Lisbon and Las Vegas. International Journal of Law in the Built Environment, 9(02), 123-42.

Bamana, F, Lehoux, N and Cloutier, C (2019) Simulation of a Construction Project: Assessing Impact of Just-in-Time and Lean Principles. Journal of Construction Engineering and Management, 145(05).

Bambrick, B (1994) Construction of an Island. Journal of Construction Engineering and Management, 120(01), 223–7.

Bamford, N, Charters, W, Lacey, R, Mills, A, Radovic, D, Robinson, J, Williams, P and Yencken, D (1998) Environment and sustainability in commercial office buildings. In: Hughes, W (Ed.), Proceedings 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK. Association of Researchers in Construction Management, Vol. 2, 644–51.

Banahene, K O, Anvuur, A and Dainty, A (2014) Conceptualising organisational resilience: An investigation into project organising. In: Raiden, A and Aboagye-Nimo, E (Eds.), Proceedings 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK, Association of Researchers in Construction Management, 795–804.

Bandara, C, Dissanayake, D, Karunasena, G and Madhusanka, N (2018) Mitigation of challenges in sustaining green certification in the Sri Lankan hotel sector. Built Environment Project and Asset Management, 8(05), 515–27.

Banfill, P F G and Peacock, A D (2007) Energy-efficient new housing - the UK reaches for sustainability. Building Research & Information, 35(04), 426–36.

Bangaru, S S, Wang, C, Zhou, X, Jeon, H W and Li, Y (2020) Gesture Recognition–Based Smart Training Assistant System for Construction Worker Earplug-Wearing Training. Journal of Construction Engineering and Management, 146(12).

Bangwal, D and Tiwari, P (2019) Environmental design and awareness impact on organization image. Engineering, Construction and Architectural Management, 26(01), 29–45.

Baniassadi, F, Alvanchi, A and Mostafavi, A (2018) A simulation-based framework for concurrent safety and productivity improvement in construction projects. Engineering, Construction and Architectural Management, 25(11), 1501–15.

Banihashemi S Y and Liu L (2013) A socio-economic framework for adopting governance mechanisms in large construction projects. In: Smith, S D and Ahiaga-Dagbui, D D (Eds.), Proceedings 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK, Association of Researchers in Construction Management, 523–532.

Banik, G C (2001) Construction productivity improvement: current US perspective. Journal of Construction Procurement, 7(02), 60–71.

Bansal, S, Biswas, S and Singh, S (2018) Fuzzy TOPSIS based holistic assessment of regions: context of India. Smart and Sustainable Built Environment, 7(02), 166–81.

Bansal, V K and Pal, M (2009) Extended GIS for construction engineering by adding direct sunlight visualisations on buildings. Construction Innovation, 9(04), 406–19.

Banteli, A, Stevenson, V and Patel, H (2020) Embodied Energy Considerations in a BIM-Enabled Building Design Process: An Ethnographic Case Study. In: Scott, L and Neilson, C J (Eds.), Proceedings 36th Annual ARCOM Conference, 7-8 September 2020, UK, Association of Researchers in Construction Management, 376-385.

Bao, F, Chen, C, Chan, A P, Martek, I and Shrestha, A (2019) Dynamic framework transfer model for public–private partnerships. Engineering, Construction and Architectural Management, 26(07), 1218–39.

Bappa Salisu, J (2016) The impact of compensation on public sector construction workers in Jigawa State of Nigeria, Unpublished PhD Thesis, School of Architecture and the Built Environment, University of Wolverhampton.

Baqerin, M H, Shafahi, Y and Kashani, H (2016) Application of Weibull Analysis to Evaluate and Forecast Schedule Performance in Repetitive Projects. Journal of Construction Engineering and Management, 142(02).

Baradan, S and Usmen, M A (2006) Comparative Injury and Fatality Risk Analysis of Building Trades. Journal of Construction Engineering and Management, 132(05), 533–9.

Barak, M (2013) Teaching engineering and technology: cognitive, knowledge and problem-solving taxonomies. Journal of Engineering, Design and Technology, 11(03), 316-33.

Barakat, T A D (2009) A hybrid model of communication and information management in mega construction projects in Dubai using a new critical success factor approach, Unpublished PhD Thesis, Department of Building and Civil Engineering, Loughborough University.

Barari, A, Ganjavi, B, Jeloudar, M G and Domairry, G (2010) Assessment of two analytical methods in solving the linear and nonlinear elastic beam deformation problems. Journal of Engineering, Design and Technology, 8(02), 127–45.

Barbachyn, S M, Devine, R D, Thrall, A P and Kurama, Y C (2017) Economic Evaluation of High-Strength Materials in Stocky Reinforced Concrete Shear Walls. Journal of Construction Engineering and Management, 143(10).

Barbosa, J A, Araújo, C, Mateus, R and Bragança, L (2016) Smart interior design of buildings and its relationship to land use. Architectural Engineering and Design Management, 12(02), 97–106.

Barbosa, P S F and Pimental, P R (2001) A linear programming model for cash flow management in the Brazilian construction industry. Construction Management and Economics, 19(05), 469-79.

Barima, O and Rowlinson, S M (2010) Critical, manifest variables in virtual construction project value delivery. Engineering, Construction and Architectural Management, 17(02), 209.

Barker, R, Childerhouse, P, Naim, M, Masat, J and Wilson, D (2004) Potential of Total Cycle Time Compression in Construction: Focus on Program Development and Design. Journal of Construction Engineering and Management, 130(02), 177–87.

Barkham, R (1997) The financial structure and ethos of property companies: an empirical analysis. Construction Management and Economics, 15(05), 441-56.

Barlow, J, Childerhouse, P, Gann, D, Hong-Minh, S, Naim, M and Ozaki, R (2003) Choice and delivery in housebuilding: lessons from Japan for UK housebuilders. Building Research & Information, 31(02), 134–45.

Barlow, P L (2011) Development and delivery of an integrated project-based jobsite management undergraduate course. International Journal of Construction Education and Research, 7(01), 3–21.

Barnes, L and Croker, N (2013) The relevance of the ISO26000 social responsibility issues to the Hong Kong construction industry. Australasian Journal of Construction Economics and Building, 13(03), 37-50.

Barnes, W C (1993) Microcomputers in Management of Construction Operations. Journal of Construction Engineering and Management, 119(02), 403–12.

Baron, N and Cherenet, Z (2018) Perceptions and pathways of resilience in Addis Ababa. International Journal of Building Pathology and Adaptation, 36(04), 337–52.

Baron, T (1984) Housing in the inner cities. Construction Management and Economics, 2(01), 13-24.

Baron, T (1983) The challenge for the UK housing industry in the 1980s and the planning system. Construction Management and Economics, 1(01), 17-29.

Barot, B (2002) Growth and business cycles for the Swedish economy. Journal of Construction Research, 3(02), 217–53.

Baroudi, B and Metcalfe, M (2011) A human perspective of contractor prequalification. Australasian Journal of Construction Economics and Building, 11(02), 60-70.

Baroudi, B and Rapp, R (2016) Disaster restoration project management: leadership education and methods. International Journal of Disaster Resilience in the Built Environment, 7(05), 434-43.

Baroudi, B and Rapp, R R (2014) Stakeholder management in disaster restoration projects. International Journal of Disaster Resilience in the Built Environment, 5(02), 182-93.

Barraket, J and Loosemore, M (2018) Co-creating social value through cross-sector collaboration between social enterprises and the construction industry. Construction Management and Economics, 36(07), 394–408.

Barras, G C and Mayo, R E (1995) Minidirectional Drilling for Installation of Underground Electrical Conduit. Journal of Construction Engineering and Management, 121(04), 364–9.

Barraza, G A (2011) Probabilistic Estimation and Allocation of Project Time Contingency. Journal of Construction Engineering and Management, 137(04), 259–65.

Barraza, G A and Bueno, R A (2007) Probabilistic Control of Project Performance Using Control Limit Curves. Journal of Construction Engineering and Management, 133(12), 957–65.

Barraza, G A, Back, W E and Mata, F (2004) Probabilistic Forecasting of Project Performance Using Stochastic S Curves. Journal of Construction Engineering and Management, 130(01), 25–32.

Barraza, G A, Back, W E and Mata, F (2000) Probabilistic Monitoring of Project Performance Using SS-Curves. Journal of Construction Engineering and Management, 126(02), 142–8.

Barrett, J E (2018) An exploratory study of collaboration in built environment design teams : a social psychology perspective, Unpublished PhD Thesis, School of Built and Natural Environment, University of Central Lancashire.

Barrett, J, Goulding, J and Qualter, P (2013) The social life of the novel idea: what did social psychologists ever do for us?. Engineering, Construction and Architectural Management, 20(03), 250-66.

Barrett, P (2007) Revaluing Construction: a holistic model. Building Research & Information, 35(03), 268–86.

Barrett, P and Barrett, L (2006) The 4Cs model of exemplary construction projects. Engineering, Construction and Architectural Management, 13(02), 201–15.

Barrett, P and Sutrisna, M (2009) Methodological strategies to gain insights into informality and emergence in construction project case studies. Construction Management and Economics, 27(10), 935–48.

Barrett, P S (1992) Measuring the ability gap for construction professionals. Construction Management and Economics, 10(04), 321-42.

Barrett, P S and Barrett, L C (2003) Research as a kaleidoscope on practice. Construction Management and Economics, 21(07), 755-66.

Barrett, P S, Sexton, M G and Green, L (1999) Integrated delivery systems for sustainable construction. Building Research & Information, 27(06), 398–405.

Barrett, P, Sharma, M and Zeisel, J (2019) Optimal spaces for those living with dementia: principles and evidence. Building Research & Information, 47(06), 734–46.

Barrows, M, Clevenger, C M, Abdallah, M and Wu, W (2020) Value of Certifications when Seeking Construction Employment. International Journal of Construction Education and Research, 16(01), 61–79.

Barry, W, Leite, F and O’Brien, W J (2015) Late Deliverable Risk Catalog: Evaluating the Impacts and Risks of Late Deliverables to Construction Sites. Journal of Construction Engineering and Management, 141(04).

Barthel, P-A (2016) Morocco in the era of eco-urbanism: Building a critical and operational research on an emerging practice in Africa. Smart and Sustainable Built Environment, 5(03), 272-88.

Bartiaux, F, Gram-Hanssen, K, Fonseca, P, Ozoli?a, L and Christensen, T H (2014) A practice–theory approach to homeowners' energy retrofits in four European areas. Building Research & Information, 42(04), 525-38.

Bartlett, E and Howard, N (2000) Informing the decision makers on the cost and value of green building. Building Research & Information, 28(05), 315–24.

Bartley E A (2013) Assessing the potential application of online social networks for the construction industry . In: Smith, S D and Ahiaga-Dagbui, D D (Eds.), Proceedings 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK, Association of Researchers in Construction Management, 589–598.

Bartley, T, McMahon, C and Denton, S (2016) Information Flows in Highway Project Delivery . In: Chan, P W and Neilson, C J (Eds.), Proceedings 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester UK. Association of Researchers in Construction Management, 739–748.

Bártolo, H M G (2000) Improving the value of design: a quality/cost approach. In: Akintoye, A (Ed.), Proceedings 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK. Association of Researchers in Construction Management, Vol. 2, 667–73.

Bartolo, H M G (2002) The application of repertory grid techniques to the assessment of users' perceptions of design quality in construction, Unpublished PhD Thesis, School of Construction Management and Engineering, University of Reading.

Bártolo, H M G and Bártolo, P J S (2002) Borrowing from nature to support architectural design. In: Greenwood, D (Ed.), Proceedings 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK. Association of Researchers in Construction Management, Vol. 1, 155–64.

Bártolo, H M G and Bártolo, P J S (2001) Computer aided concurrent design. In: Akintoye, A (Ed.), Proceedings 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK. Association of Researchers in Construction Management, Vol. 1, 731–9.

Bártolo, H M G and Bártolo, P J S (2003) Design reasoning. In: Greenwood, D J (Ed.), Proceedings 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK. Association of Researchers in Construction Management, Vol. 1, 141–50.

Barton, R T (2000) Soft value management methodology for use in project initiation: a learning journey. Journal of Construction Research, 1(02), 109–22.

Basha, I M and Gab‐Allah, A A (1991) Value Engineering in Egyptian Bridge Construction. Journal of Construction Engineering and Management, 117(03), 393–401.

Basha, I M, Gab-Allah, A A and Amer, M I (1995) Construction of Ameria Caisson in Egypt. Journal of Construction Engineering and Management, 121(01), 13–19.

Bashford, H H, Sawhney, A, Walsh, K D and Kot, K (2003) Implications of Even Flow Production Methodology for U.S. Housing Industry. Journal of Construction Engineering and Management, 129(03), 330–7.

Bashford, H H, Walsh, K D and Sawhney, A (2005) Production System Loading–Cycle Time Relationship in Residential Construction. Journal of Construction Engineering and Management, 131(01), 15–22.

Bashir, A M (2013) A framework for utilising lean construction strategies to promote safety on construction sites, Unpublished PhD Thesis, School of Technology, University of Wolverhampton.

Bashir, A M, Suresh, S, Proverbs, D and Gameson, R (2011) A critical, theoretical, review of the impacts of lean construction tools in reducing accidents on construction sites. In: Egbu, C and Lou, E C W (Eds.), Proceedings 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK. Association of Researchers in Construction Management, 249–58.

Bashir, H A (2010) Removal of Redundant Relationships in an AON Project Network for Evaluating Schedule Complexity. Journal of Construction Engineering and Management, 136(07), 787–93.

Bashouri, J and William, D G (2014) A model for sharing knowledge in architectural firms. Construction Innovation, 14(02), 168-85.

Bassanino, M, Fernando, T and Wu, K-C (2014) Can virtual workspaces enhance team communication and collaboration in design review meetings?. Architectural Engineering and Design Management, 10(03), 200-17.

Bassindale, J (2020) Learning through Successful Feedback: Digital Opportunities for Effective Feedback in Project-Based Architectural Education. International Journal of Construction Education and Research, 16(02), 84–101.

Bassioni, H A (2004) A framework for measuring business performance in construction contracting organisations, Unpublished PhD Thesis, Department of Building and Civil Engineering, Loughborough University.

Bassioni, H A, Hassan, T M and Price, A D F (2008) Evaluation and analysis of criteria and sub-criteria of a construction excellence model. Engineering, Construction and Architectural Management, 15(01), 21–41.

Bassioni, H A, Price, A D F and Hassan, T M (2005) Building a conceptual framework for measuring business performance in construction: an empirical evaluation. Construction Management and Economics, 23(05), 495-507.

Bassioni, H, Emasry, M I, Ragheb, A M and Youssef, A A (2012) Time series analysis for the prediction of RC material components prices in Egypt . In: Smith, S.D (Ed.), Proceedings 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK. Association of Researchers in Construction Management, 381–90.

Bastos, J, Batterman, S A and Freire, F (2016) Significance of mobility in the life-cycle assessment of buildings. Building Research & Information, 44(04), 376-93.

Bastos, M F, Ribeiro, F L and Teixeira, J C (2005) Estimating of capital cost of underground car parking projects. Journal of Financial Management of Property and Construction, 10(02), 125–32.

Basurto, C, Kämpf, J H and Scartezzini, J-L (2017) Multi-criteria analysis for the integrated performance assessment of complex fenestration systems. Building Research & Information, 45(08), 926-42.

Bataw, A (2015) On the integration of building information modelling in undergraduate civil engineering programmes in the UK, Unpublished PhD Thesis, Department of Mechanical, Aerospace & Civil Engineering, University of Manchester.

Bates, M, Sturges, J, McGowan, K and Sommerville, J (1999) Material supply in house construction: the potential to enhance performance by improving communication. In: Hughes, W (Ed.), Proceedings 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK. Association of Researchers in Construction Management, Vol. 2, 559–67.

Bates, W and Dawood, N N (1998) Development of a risk allocation strategy for construction in the process industry: a knowledge approach. In: Hughes, W (Ed.), Proceedings 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK. Association of Researchers in Construction Management, Vol. 2, 477–85.

Batra, S (2020) Framework of socialisation, authentic leadership and affective commitment for construction professionals. Construction Economics and Building, 20(01), 77-95.

Batselier, J and Vanhoucke, M (2015) . Journal of Construction Engineering and Management, 141(11).

Battikha, M G (2002) QUALICON: Computer-Based System for Construction Quality Management. Journal of Construction Engineering and Management, 128(02), 164–73.

Battikha, M G (2008) Reasoning Mechanism for Construction Nonconformance Root-Cause Analysis. Journal of Construction Engineering and Management, 134(04), 280–8.

Battikha, M G and Davidson, C H (1996) Cause and effect 3-D model for measuring performance in construction acceleration: a decision support system. Building Research & Information, 24(06), 351–7.

Bauer, E and Menches, C L (2011) Why We Need Renaissance Engineers: Golden Gate Bridge Seismic Retrofit Phase II Case Study. Journal of Construction Engineering and Management, 137(10), 901–5.

Baughan, R and Crapper, M (2016) Competence Management in the UK Heritage Railway Industry. In: Chan, P W and Neilson, C J (Eds.), Proceedings 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester UK. Association of Researchers in Construction Management, 519–528.

Baxendale, A (1984) Construction resource models by Monte Carlo simulation. Construction Management and Economics, 2(03), 201-17.

Bayat, F, Noorzai, E and Golabchi, M (2019) Identifying the most important public–private partnership risks in Afghanistan’s infrastructure projects. Journal of Financial Management of Property and Construction , 24(03), 309–37.

Bayat, M, Khanzadi, M and Nasirzadeh, F (2020) Bargaining Game Model to Determine Concessionary Items in Build-Operate-Transfer Contracts. Journal of Construction Engineering and Management, 146(02).

Bayat, M, Khanzadi, M, Nasirzadeh, F and Chavoshian, A (2020) Financial conflict resolution model in BOT contracts using bargaining game theory. Construction Innovation , 20(01), 18–42.

Bayrak, T and Kaka, A (2004) Evaluation of digital photogrammetry and 3D CAD modelling applications in construction management. In: Khosrowshahi, F (Ed.), Proceedings 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK. Association of Researchers in Construction Management, Vol. 1, 613–9.

Bayraktar, M E and Hastak, M (2009) Bayesian Belief Network Model for Decision Making in Highway Maintenance: Case Studies. Journal of Construction Engineering and Management, 135(12), 1357–69.

Bayraktar, M E and Hastak, M (2010) Scoring Approach to Construction Bond Underwriting. Journal of Construction Engineering and Management, 136(09), 957–67.

Bayraktar, M E, Arif, F, Ponder, D, Prozzi, J and Mahmoud, N V (2016) Opportunities for Value Extraction Projects in Highway Rights-of-Way and Development of Feasibility Assessment Tool. Journal of Construction Engineering and Management, 142(08).

Bayraktar, M E, Hastak, M, Gokhale, S and Safi, B (2011) Decision Tool for Selecting the Optimal Techniques for Cost and Schedule Reduction in Capital Projects. Journal of Construction Engineering and Management, 137(09), 645–55.

Bayram, S and Al-Jibouri, S (2016) Efficacy of Estimation Methods in Forecasting Building Projects’ Costs. Journal of Construction Engineering and Management, 142(11).

Bazen, E (2014) Effect of the Building Act 2011 on compliance costs in Western Australia. Australasian Journal of Construction Economics and Building, 14(02), 41-56.

Beadle, K, Gibb, A, Austin, S, Fuster, A and Madden, P (2008) Adaptable futures: sustainable aspects of adaptable buildings.. In: Dainty, A (Ed.), Proceedings 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK. Association of Researchers in Construction Management, Vol. 2, 1125–34.

Beainy, F, Commuri, S and Zaman, M (2012) Quality Assurance of Hot Mix Asphalt Pavements Using the Intelligent Asphalt Compaction Analyzer. Journal of Construction Engineering and Management, 138(02), 178–87.

Beaney, W D (2007) A principal components analysis of labour sectoral transfers. In: Boyd, D (Ed.), Proceedings 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK. Association of Researchers in Construction Management, Vol. 1, 233–42.

Beaney, W D (2006) An examination of sectoral mobility in the UK labour force. In: Boyd, D (Ed.), Proceedings 22nd Annual ARCOM Conference, 4-6 September 2006 Birmingham, UK. Association of Researchers in Construction Management, Vol. 2, 875–84.

Beatham, S (2003) Development of an integrated business improvement system for construction, Unpublished PhD Thesis, Department of Civil and Building Engineering, Loughborough University.

Beavers, J E, Moore, J R and Schriver, W R (2009) Steel Erection Fatalities in the Construction Industry. Journal of Construction Engineering and Management, 135(03), 227–34.

Beavers, J E, Moore, J R, Rinehart, R and Schriver, W R (2006) Crane-Related Fatalities in the Construction Industry. Journal of Construction Engineering and Management, 132(09), 901–10.

Bebelaar, N, Braggaar, R C, Kleijwegt, C M, Meulmeester, R W E, Michailidou, G, Salheb, N, van der Spek, S, Vaissier, N and Verbree, E (2018) Monitoring urban environmental phenomena through a wireless distributed sensor network. Smart and Sustainable Built Environment, 7(01), 68–79.

Becerik-Gerber, B, Jazizadeh, F, Li, N and Calis, G (2012) Application Areas and Data Requirements for BIM-Enabled Facilities Management. Journal of Construction Engineering and Management, 138(03), 431–42.

Becerik, B (2004) Suggestions for improving adoption of online collaboration and project management technology. In: Khosrowshahi, F (Ed.), Proceedings 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK. Association of Researchers in Construction Management, Vol. 2, 1221–33.

Becerra, J, Ortiz, P, Zaderenko, A P and Karapanagiotis, I (2020) Assessment of nanoparticles/nanocomposites to inhibit micro-algal fouling on limestone façades. Building Research & Information, 48(02), 180–90.

Becker, T C, Jaselskis, E J and El-Gafy, M (2014) Improving Predictability of Construction Project Outcomes through Intentional Management of Indirect Construction Costs. Journal of Construction Engineering and Management, 140(06).

Bee Hua, G (2008) The state of applications of quantitative analysis techniques to construction economics and management (1983 to 2006). Construction Management and Economics, 26(05), 485-97.

Beemsterboer, S and Koch, C (2017) A Human Touch: Examining The Roles Of Middle Managers For Innovation In Contractors . In: Chan, P W and Neilson, C J (Eds.), Proceedings 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK. Association of Researchers in Construction Management, 430–439.

Beemsterboer, S and Koch, C (2016) Building Information Standards: Big Data Technologies Prevented From Becoming Big in Building. In: Chan, P W and Neilson, C J (Eds.), Proceedings 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester UK. Association of Researchers in Construction Management, 83–92.

Beeston, D (1986) Combining risks in estimating. Construction Management and Economics, 4(01), 75-9.

Beheiry, S M, Chong, W K and Haas, C T (2006) Examining the Business Impact of Owner Commitment to Sustainability. Journal of Construction Engineering and Management, 132(04), 384–92.

Behm, M (2012) Safe Design Suggestions for Vegetated Roofs. Journal of Construction Engineering and Management, 138(08), 999–1003.

Behm, M and Hock, P C (2012) Safe design of skyrise greenery in Singapore. Smart and Sustainable Built Environment, 1(02), 186-205.

Behm, M and Schneller, A (2013) Application of the Loughborough Construction Accident Causation model: a framework for organizational learning. Construction Management and Economics, 31(06), 580-95.

Behnisch, M and Ultsch, A (2009) Urban data-mining: spatiotemporal exploration of multidimensional data. Building Research & Information, 37(05), 520–32.

Behzadi, N and Fadeyi, M O (2012) A preliminary study of indoor air quality conditions in Dubai public elementary schools. Architectural Engineering and Design Management, 8(03), 192-213.

Beim, A and Jensen, K V (2007) Forming core elements for strategic design management: how to define and direct architectural value in aniIndustrialized context. Architectural Engineering and Design Management, 3(01), 29–38.

Beitelmal, W, Molenaar, K R, Javernick-Will, A and Pellicer, E (2017) Challenges and barriers to establishing infrastructure asset management: A comparative study between Libya and the USA. Engineering, Construction and Architectural Management, 24(06), 1184-202.

Bekdik, B, Pörzgen, J, Bull, S S and Thuesen, C (2018) Modularising design processes of façades in Denmark: re-exploring the use of design structure matrix. Architectural Engineering and Design Management, 14(01–02), 95–108.

Belabed, Y, Kerboua, B and Tarfaoui, M (2019) New design for reducing interfacial stresses of reinforced structures with FRP plates. International Journal of Building Pathology and Adaptation, 37(02), 196–207.

Belayutham, S and Ibrahim, C, K, I, C (2019) Barriers and strategies for better safety practices: the case of construction SMEs in Malaysia. Construction Economics and Building, 19(01), 20-39.

Belayutham, S, Che Ibrahim, C K I, Zulkifli, A R and Ibrahim, N (2019) A dual-functional social innovation process model for low-cost houses through university-enabled initiative. Construction Innovation , 19(02), 126–48.

Belayutham, S, Ibrahim, K I and Hussain, A (2019) Shaping The Future Of Prevention Through Design (PTD) Practice In The Malaysian Construction Industry . In: Gorse, C and Neilson, C J (Eds.), Proceedings 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK Association of Researchers in Construction Management, 487-496.

Belayutham, S, Zabidin, N, S and Ibrahim, C, K, I, C (2018) Dynamic Representation of Barriers for Adopting Building Information Modelling in Malaysian Tertiary Education . Construction Economics and Building, 18(04), 24-44.

Beliveau, Y J, Dixit, S S, Dal, T and Morad, A A (1993) Multitask Motion Planning for Material Handling in Construction. Journal of Construction Engineering and Management, 119(01), 180–91.

Beliveau, Y J, Snyder, D A and Vorster, M C (1991) DBE Programs—New Model. Journal of Construction Engineering and Management, 117(01), 176–92.

Beliveau, Y J, Williams, J M, King, M G and Niles, A R (1995) Real-Time Position Measurement Integrated with CAD: Technologies and Their Protocols. Journal of Construction Engineering and Management, 121(04), 346–54.

Beliveau, Y, Dixit, S and Dal, T (1993) Dynamic Damping of Payload Motion for Cranes. Journal of Construction Engineering and Management, 119(03), 631–44.

Bell, L C and McCullouch, B G (1988) Bar Code Applications in Construction. Journal of Construction Engineering and Management, 114(02), 263–78.

Bell, L C and McCullouch, B G (1983) Microcomputer Spreadsheet Applications. Journal of Construction Engineering and Management, 109(02), 214–23.

Bell, L C and Stukhart, G (1986) Attributes of Materials Management Systems. Journal of Construction Engineering and Management, 112(01), 14–21.

Bell, L C and Stukhart, G (1987) Costs and Benefits of Materials Management Systems. Journal of Construction Engineering and Management, 113(02), 222–34.

Bell, N, Powell, C and Sykes, P (2015) Securing the well-being and engagement of construction workers: An initial appraisal of the evidence. In: Raiden, A and Aboagye-Nimo, E (Eds.), Proceedings 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK. Association of Researchers in Construction Management, 489–498.

Bellamy, T, Williams, A, Sher, W, Sherratt, S and Gameson, R (2005) Design communication: issues confronting both co-located and virtual teams. In: Khosrowshahi, F (Ed.), Proceedings 21st Annual ARCOM Conference, 7-9 September 2005, London, UK. Association of Researchers in Construction Management, Vol. 1, 353–61.

Bellifa, S and Boumechra, N (2019) Effects of calcium leaching on the physical and mechanical properties of aerial lime-cement mortars. Journal of Engineering, Design and Technology , 17(03), 649–66.

Bello W A and Odusami K T (2013) Weak management of the predictability of contingency allowance in construction projects in Nigeria. In: Smith, S D and Ahiaga-Dagbui, D D (Eds.), Proceedings 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK, Association of Researchers in Construction Management, 969–978.

Bello, N A, Agava, Y H and Olanrele, O O (2021) Investment property typology analysis; evidence from Nigerian urban property returns and macroeconomic variables. African Journal of Built Environment Research, 5(1), 77-96.

Bello, N U, Jolaoso, A B and Olanrele, O O (2018) Comparative analysis of investment attributes of hotel and commercial property in South-Western Nigeria. African Journal of Built Environment Research, 2(1), 1-20.

Belniak, S, Lesniak, A, Plebankiewicz, E and Zima, K (2013) The influence of the building shape on the costs of its construction. Journal of Financial Management of Property and Construction, 18(01), 90-102.

Belpoliti, V, Nassif, R, Alzaabi, E and Aljneibi, A (2020) Multi-criteria assessment for the functional-energy upgrade of the UAE school sector: a bottom-up approach promoting refurbishment versus new construction. Architectural Engineering and Design Management, 16(03), 167–90.

Beltrão, L M P and Carvalho, M T M (2019) Prioritizing Construction Risks Using Fuzzy AHP in Brazilian Public Enterprises. Journal of Construction Engineering and Management, 145(02).

Belusko, M and O'Leary, T (2010) Cost analyses of measures to improve residential energy ratings to 6 stars - Playford North Development, South Australia. Australasian Journal of Construction Economics and Building, 10(01), 36-47.

Bemelmans, J, Voordijk, H and Vos, B (2012) Supplier-contractor collaboration in the construction industry: A taxonomic approach to the literature of the 2000-2009 decade. Engineering, Construction and Architectural Management, 19(04), 342-68.

Bemelmans, J, Voordijk, H, Vos, B and Buter, J (2012) Assessing Buyer-Supplier Relationship Management: Multiple Case-Study in the Dutch Construction Industry. Journal of Construction Engineering and Management, 138(01), 163–76.

Ben-Haim, Y and Laufer, A (1998) Robust Reliability of Projects with Activity-Duration Uncertainty. Journal of Construction Engineering and Management, 124(02), 125–32.

Benabdellah, A C, Benghabrit, A and Bouhaddou, I (2020) Complexity drivers in engineering design. Journal of Engineering, Design and Technology , 18(06), 1663–90.

Benachio, G L F, Freitas, M d C D and Tavares, S F (2021) Interactions between Lean Construction Principles and Circular Economy Practices for the Construction Industry. Journal of Construction Engineering and Management, 147(07).

Bencze, O C, Dasmohapatra, S and Tilotta, D C (2012) A concept for a performance-based rating system for home resilience: ReScU. International Journal of Disaster Resilience in the Built Environment, 3(02), 148-65.

Bendak, S and Alhammadi, A A (2019) A multi-criteria decision-making approach to minimising fire risk in detached house designs. Journal of Engineering, Design and Technology , 17(06), 1146–60.

Bendi, D, Rana, M Q, Arif, M, Goulding, J S and Kaushik, A K (2020) Understanding off-site readiness in Indian construction organisations. Construction Innovation , 21(01), 105–22.

Bendi, D, Rana, M Q, Arif, M, Goulding, J S and Sawhney, A (2020) An off-site construction readiness maturity model for the Indian construction sector. Construction Innovation , 21(01), 123–42.

Bendixen, M and Koch, C (2007) Negotiating visualizations in briefing and design. Building Research & Information, 35(01), 42–53.

Benes, J and Diepeveen, W J (1985) Flexible planning in construction firms. Construction Management and Economics, 3(01), 25-31.

Bengtsson, S H (2017) Innovation In The Construction Industry: Factors, Actors And The Client's Role. In: Chan, P W and Neilson, C J (Eds.), Proceedings 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK. Association of Researchers in Construction Management, 104–113.

Bengtsson, S H and Rosander, L (2018) Public clients' possibilities to initiate sustainable change: exploring two Swedish clients' procurement strategies. In: Gorse, C and Neilson, C J (Eds.), Proceedings 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK. Association of Researchers in Construction Management, 424–434.

Benhaim, M and Birchall, D W (1998) Interfirm relationships within the construction industry: a comparative study between France and the UK. In: Hughes, W (Ed.), Proceedings 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK. Association of Researchers in Construction Management, Vol. 2, 407–15.

Benhart, B L and Shaurette, M (2014) Establishing New Graduate Competencies: Purdue University's Construction Management Curriculum Restructuring. International Journal of Construction Education and Research, 10(01), 19-38.

Benjaoran, V and Bhokha, S (2009) Enhancing visualization of 4D CAD model compared to conventional methods. Engineering, Construction and Architectural Management, 16(04), 392–408.

Benjaoran, V and Peansupap, V (2020) Grid-based construction site layout planning with Particle Swarm Optimisation and Travel Path Distance. Construction Management and Economics, 38(08), 673–88.

Benjaoran, V, Dawood, N and Hobbs, B (2005) Flowshop scheduling model for bespoke precast concrete production planning. Construction Management and Economics, 23(01), 93-105.

Benjaoran, V, Dawood, N and Scott, D (2004) Bespoke precast productivity estimation with neural network model. In: Khosrowshahi, F (Ed.), Proceedings 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK. Association of Researchers in Construction Management, Vol. 2, 1063–74.

Benjaoran, V, Tabyang, W and Sooksil, N (2015) Precedence relationship options for the resource levelling problem using a genetic algorithm. Construction Management and Economics, 33(09), 711-23.

Benmansour, C and Hogg, K (2002) An investigation into the barriers to innovation and their relevance within the construction sector. In: Greenwood, D (Ed.), Proceedings 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK. Association of Researchers in Construction Management, Vol. 2, 677–86.

Bennett, J (1993) Japan's building industry: the new model. Construction Management and Economics, 11(01), 3-17.

Bennett, J (1983) Project management in construction. Construction Management and Economics, 1(03), 183-97.

Bennett, J and Ferry, D (1990) Specialist contractors: a review of issues raised by their new role in building. Construction Management and Economics, 8(03), 259-83.

Bennett, J and Ormerod, R N (1984) Simulation applied to construction projects. Construction Management and Economics, 2(03), 225-63.

Bennett, W G and Karunarathna, H (2019) Coastal flood alleviation through management interventions under changing climate conditions. International Journal of Disaster Resilience in the Built Environment, 11(02), 187–203.

Bensalah, M, Elouadi, A and Mharzi, H (2019) Overview: the opportunity of BIM in railway. Smart and Sustainable Built Environment, 8(02), 103–16.

Bentivegna, V, Curwell, S, Deakin, M, Lombardi, P, Mitchell, G and Nijkamp, P (2002) A vision and methodology for integrated sustainable urban development: BEQUEST. Building Research & Information, 30(02), 83–94.

Bentley, D and Stacey, R (1998) The potential for applying complex adaptive systems theory to the process of estimating in the construction industry. In: Hughes, W (Ed.), Proceedings 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK. Association of Researchers in Construction Management, Vol. 1, 236–45.

Beran, V and Dlask, P (2007) Nonlinear optimisation and rational cash flow. Engineering, Construction and Architectural Management, 14(03), 277–92.

Beran, V, Dlask, P, Eaton, D, Hromada, E and Zindulka, O (2011) Mapping of synchronous activities through virtual management momentum simulation. Construction Innovation, 11(02), 190–211.

Berente, N, Baxter, R and Lyytinen, K (2010) Dynamics of inter-organizational knowledge creation and information technology use across object worlds: the case of an innovative construction project. Construction Management and Economics, 28(06), 569–88.

Berg, J B, Thuesen, C, Ernstsen, S K and Jensen, P A (2021) Reconfiguring the construction value chain: analysing key sources of friction in the business model archetypes of AEC companies in strategic partnerships. Construction Management and Economics, 39(06), 533–48.

Berg, R and Hinze, J (2005) Theft and Vandalism on Construction Sites. Journal of Construction Engineering and Management, 131(07), 826–33.

Berg, S, Legnerot, C, Lindstrom, A, Nilsson, M, Bosch, P and Gluch, P (2012) Knowledge transfer within and across organizational boundaries: a case study in the construction industry. In: Smith, S.D (Ed.), Proceedings 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK. Association of Researchers in Construction Management, 645–54.

Berggren, B (1999) Industry's contribution to sustainable development. Building Research & Information, 27(06), 432–6.

Bergsdal, H, Brattebø, H and Müller, D B (2014) Dynamic material flow analysis for PCBs in the Norwegian building stock. Building Research & Information, 42(03), 359-70.

Bergsdal, H, Brattebø, H, Bohne, R A and Müller, D B (2007) Dynamic material flow analysis for Norway's dwelling stock. Building Research & Information, 35(05), 557–70.

Bergström, M and Stehn, L (2005) Benefits and disadvantages of ERP in industrialised timber frame housing in Sweden. Construction Management and Economics, 23(08), 831-8.

Berkeley, D, Humphreys, P C and Thomas, R D (1991) Project risk action management. Construction Management and Economics, 9(01), 3-17.

Berker, T and Bharathi, K (2012) Energy and buildings research: challenges from the new production of knowledge. Building Research & Information, 40(04), 473-80.

Bernie, J and Howes, R (1983) Project management control using real-time budgeting and forecasting models. Construction Papers, 2(01), 19–40.

Bernold, L E (2005) Automatic As-Built Generation with Utility Trenchers. Journal of Construction Engineering and Management, 131(06), 740–7.

Bernold, L E (2003) Economic Model to Optimize Underground Utility Protection. Journal of Construction Engineering and Management, 129(06), 645–52.

Bernold, L E (2005) Paradigm Shift in Construction Education is Vital for the Future of Our Profession. Journal of Construction Engineering and Management, 131(05), 533–9.

Bernold, L E (2007) Quantitative Assessment of Backhoe Operator Skill. Journal of Construction Engineering and Management, 133(11), 889–99.

Bernold, L E (2002) Spatial Integration in Construction. Journal of Construction Engineering and Management, 128(05), 400–8.

Bernold, L E (2007) Teaching Evaluations for Construction Engineering and Management: Opportunity to Move Us Forward. Journal of Construction Engineering and Management, 133(02), 146–56.

Bernold, L E (1990) Testing Bar‐Code Technology in Construction Environment. Journal of Construction Engineering and Management, 116(04), 643–55.

Bernold, L E and Chang, P (1992) Potential Gains through Welded‐Wire Fabric Reinforcement. Journal of Construction Engineering and Management, 118(02), 244–57.

Bernold, L E and Guler, N (1993) Analysis of Back Injuries in Construction. Journal of Construction Engineering and Management, 119(03), 607–21.

Bernold, L E and Lee, T S (2010) Experimental Research in Construction. Journal of Construction Engineering and Management, 136(01), 26–35.

Bernold, L E and Salim, M (1993) Placement‐Oriented Design and Delivery of Concrete Reinforcement. Journal of Construction Engineering and Management, 119(02), 323–35.

Bernold, L E and Treseler, J F (1991) Vendor Analysis for Best Buy in Construction. Journal of Construction Engineering and Management, 117(04), 645–58.

Bernold, L E, Lorenc, S J and Davis, M L (2001) Technological Intervention to Eliminate Back Injury Risks for Nailing. Journal of Construction Engineering and Management, 127(03), 245–50.

Bernold, L E, Lorenc, S J and Luces, E (1997) Intelligent Technology for Truck Crane Accident Prevention. Journal of Construction Engineering and Management, 123(03), 276–84.

Berry, S, Sharp, A, Hamilton, J and Killip, G (2014) Inspiring low-energy retrofits: the influence of ‘open home’ events. Building Research & Information, 42(04), 422-33.

Berryman, C W, Fischer, B, Wentz, T and Nobe, M D (2004) Distance education with Internet 2 audio/video technology. International Journal of Construction Education and Research, 1(01), 45–60.

Berryman, C W, Jensen, W G and Zhu, J (2006) Maximization of fly ash in the manufacture of reinforced concrete pipe. International Journal of Construction Education and Research, 2(03), 209-16.

Bertero, R D (2014) Great 2010 American Earthquakes: Lessons for Seismic Design and Construction. Journal of Construction Engineering and Management, 140(04).

Bertero, R D (2014) Los Grandes Terremotos Americanos del Año 2010: Enseñanzas para el Diseño y la Construcción Sísmica. Journal of Construction Engineering and Management, 140(04).

Besaiso, H, Fenn, P and Emsley, M (2016) Alternative dispute resolution in Palestine: the myth and dilemma of construction mediation. International Journal of Law in the Built Environment, 8(03), 269-86.

Besaiso, H, Fenn, P, Emsley, M and Wright, D (2018) A comparison of the suitability of FIDIC and NEC conditions of contract in Palestine. Engineering, Construction and Architectural Management, 25(02), 241–56.

Besklubova, S, Skibniewski, M J and Zhang, X (2021) Factors Affecting 3D Printing Technology Adaptation in Construction. Journal of Construction Engineering and Management, 147(05).

Best, R (2009) A refined basket of goods approach for comparing construction costs between countries. Australasian Journal of Construction Economics and Building, 9(02), 29-38.

Best, R (2011) Developing a basket of resources as a tool for collecting construction cost data internationally. In: Egbu, C and Lou, E C W (Eds.), Proceedings 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK. Association of Researchers in Construction Management, 75–84.

Best, R (2012) International comparisons of cost and productivity in construction: a bad example. Australasian Journal of Construction Economics and Building, 12(03), 82-88.

Best, R (2010) Using purchasing power parity to assess construction productivity. Australasian Journal of Construction Economics and Building, 10(04), 1-10.

Best, R and Langston, C (2006) Evaluation of construction contractor performance: a critical analysis of some recent research. Construction Management and Economics, 24(04), 439-45.

Best, R and Purdey, B (2012) Assessing occupant comfort in an iconic sustainable education building. Australasian Journal of Construction Economics and Building, 12(03), 55-65.

Betts, M (1991) Achieving and measuring flexibility in project information retrieval. Construction Management and Economics, 9(03), 231-45.

Betts, M (1987) British public expenditure on construction less than claimed?. Construction Management and Economics, 5(01), 13-20.

Betts, M (1990) Methods and data used by large building contractors in preparing tenders. Construction Management and Economics, 8(04), 399-414.

Betts, M and Lansley, P R (1993) Construction Management and Economics: a review of the first ten years. Construction Management and Economics, 11(04), 221-45.

Betts, M and Liow, S R (1993) The relationship between teaching methods and educational objectives in building education. Construction Management and Economics, 11(02), 131-41.

Betts, M and Ofori, G (1993) Competitive advantage in construction: reply. Construction Management and Economics, 11(01), 73-4.

Betts, M and Ofori, G (1992) Strategic planning for competitive advantage in construction. Construction Management and Economics, 10(06), 511-32.

Betts, M and Ofori, G (1994) Strategic planning for competitive advantage in construction: the institutions. Construction Management and Economics, 12(03), 203-17.

Betts, M and Wood-Harper, T (1994) Re-engineering construction: a new management research agenda. Construction Management and Economics, 12(06), 551-6.

Betts, M, Cher, L, Mathur, K and Ofori, G (1991) Strategies for the construction sector in the information technology era. Construction Management and Economics, 9(06), 509-28.

Bevan W and Lu S (2013) Green marketing in housing: reality or rhetoric?. In: Smith, S D and Ahiaga-Dagbui, D D (Eds.), Proceedings 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK, Association of Researchers in Construction Management, 1243–1252.

Bevan, E A M and Yung, P (2015) Implementation of corporate social responsibility in Australian construction SMEs. Engineering, Construction and Architectural Management, 22(03), 295-311.

Bevan, W and Lu, S (2012) A multidisciplinary literature review of low and zero carbon technologies into new housing. In: Smith, S.D (Ed.), Proceedings 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK. Association of Researchers in Construction Management, 1435–44.

Bevan, W J (2020) How to Improve the Student Feedback Process: A Case Study within the Built Environment. International Journal of Construction Education and Research, 16(02), 117–31.

Bevan, W, Lu, S and Sexton, M (2020) Skills required to deliver energy efficient school retrofit buildings. Engineering, Construction and Architectural Management, 27(10), 3051–73.

Bewry, S and Kenley, R (1998) Development of service delivery through asset management. In: Hughes, W (Ed.), Proceedings 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK. Association of Researchers in Construction Management, Vol. 2, 662–71.

Bhandari, S and Hallowell, M R (2017) Emotional Engagement in Safety Training: Impact of Naturalistic Injury Simulations on the Emotional State of Construction Workers. Journal of Construction Engineering and Management, 143(12).

Bhandari, S, Hallowell, M R, Alruqi, W and Salas, R (2021) Modeling the Relationship between Personal Risk Tolerance, Work-Related Risk Tolerance, and Risk-Taking Behavior of Construction Workers. Journal of Construction Engineering and Management, 147(04).

Bhandari, S, Hallowell, M R, Boven, L V, Welker, K M, Golparvar-Fard, M and Gruber, J (2020) Using Augmented Virtuality to Examine How Emotions Influence Construction-Hazard Identification, Risk Assessment, and Safety Decisions. Journal of Construction Engineering and Management, 146(02).